There are two APIs for mem2mem devices, the older single-planar API and
the newer multi-planar one. Without making things overly complex, the
driver can only support one or the other. However the userspace libv4l2
library has a plugin that allows multi-planar API devices to service
single-planar consumers.

Chromium supports the multi-planar API exclusively, though this is
currently limited to ChromiumOS. It would be possible to add support
for generic Linux.

Switching to the multi-planar API would allow usage of both APIs from
userspace.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>

To allow for console rotation under DRM (where the firmware
can't lie about geometry), add FRAMEBUFFER_CONSOLE_ROTATION
so that the kernel can do it.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>

Taken from the dri-devel mailing list (11/7/2019) to fixup the cmdline
parsing, but requires changes as things have moved between 4.19 and 5.2.

From: Dmitry Osipenko <digetx@gmail.com>

The rotation mode from cmdline shouldn't be taken into account if it
wasn't specified in the cmdline. This fixes ignored default display
orientation when display mode is given using cmdline without the
rotation being specified.

Fixes: 1bf4e092

 ("drm/modes: Allow to specify rotation and reflection on the commandline")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>

Now that the TV margins are properly parsed and filled into
drm_cmdline_mode, we just need to initialise the first state at reset to
get those values and start using them.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>

Now that the TV margins are properly parsed and filled into
drm_cmdline_mode, we just need to initialise the first state at reset to
get those values and start using them.

Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/44e24172e300be6a41578517021ef6a6e90ed682.1560783090.git-series.maxime.ripard@bootlin.com

Commit 731514b4

 upstream.
Reworked as functions have been moved from drm_atomic_helper.[c|h]
to drm_atomic_state_helper.[c|h].

During the connector reset, if that connector has a TV property, it needs
to be reset to the value provided on the command line.

Provide a helper to do that.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/84a7b657f09303a2850e1cc79e68f623547f3fdd.1560783090.git-series.maxime.ripard@bootlin.com

Commit 3d46a300

 upstream.

Properly configuring the overscan properties might be needed for the
initial setup of the framebuffer for display that still have overscan.
Let's allow for more properties on the kernel command line to setup each
margin.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e481f1628e3768ca49226ec2115cfa4dfcbd5e4c.1560783090.git-series.maxime.ripard@bootlin.com

Commit 22045e8e

 upstream.

The TV margins has been defined as a structure inside the
drm_connector_state structure so far. However, we will need it in other
structures as well, so let's move that structure definition so that it can
be reused.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/38b773b03f15ec7a135cdf8f7db669e5ada20cf2.1560783090.git-series.maxime.ripard@bootlin.com

Commit 1bf4e092

 upstream.
Minor conflict resolution as upstream has moved functions
from drm_fb_helper.c to a new drm_client_modeset.c

Rotations and reflections setup are needed in some scenarios to initialise
properly the initial framebuffer. Some drivers already had a bunch of
quirks to deal with this, such as either a private kernel command line
parameter (omapdss) or on the device tree (various panels).

In order to accomodate this, let's create a video mode parameter to deal
with the rotation and reflexion.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/777da16e42db757c1f5b414b5ca34507097fed5c.1560783090.git-series.maxime.ripard@bootlin.com

commit 3aeeb13d

 upstream.
Minor conflict resolution as upstream has moved functions
from drm_fb_helper.c to a new drm_client_modeset.c

The drm subsystem also uses the video= kernel parameter, and in the
documentation refers to the fbdev documentation for that parameter.

However, that documentation also says that instead of giving the mode using
its resolution we can also give a name. However, DRM doesn't handle that
case at the moment. Even though in most case it shouldn't make any
difference, it might be useful for analog modes, where different standards
might have the same resolution, but still have a few different parameters
that are not encoded in the modes (NTSC vs NTSC-J vs PAL-M for example).

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/18443e0c3bdbbd16cea4ec63bc7f2079b820b43b.1560783090.git-series.maxime.ripard@bootlin.com

commit e08ab74b

 upstream.

Rewrite the command line parser in order to get away from the state machine
parsing the video mode lines.

Hopefully, this will allow to extend it more easily to support named modes
and / or properties set directly on the command line.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e32cd4009153b184103554009135c7bf7c9975d7.1560783090.git-series.maxime.ripard@bootlin.com

commit 772cd52c

 upstream.

The struct drm_cmdline_mode holds the result of the command line parsers.
However, it wasn't documented so far, so let's do that.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/963c893c16c6a25fc469b53c726f493d99bdc578.1560783090.git-series.maxime.ripard@bootlin.com

Some HDMI monitors do not abide by the full or limited
(16-235) range RGB flags in the AVI infoframe. This can
result in images looking washed out (if given limited and
interpreting as full), or detail disappearing at the extremes
(given full and interpreting as limited).

Copy the Intel i915 driver's approach of adding an override
property ("Broadcast RGB") to force one mode or the other.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>

These wireless mouse/keyboard combo remote control devices specify
multiple "wheel" events in their report descriptors. The wheel events
are incorrectly defined and apparently map to accelerometer data, leading
to spurious mouse scroll events being generated at an extreme rate when
the device is moved.

As a workaround, use HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE to mask
feeding the extra wheel events to the input subsystem.

See: https://github.com/raspberrypi/firmware/issues/1189



Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>

Provide transitional support for the previous names of
the character devices.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

Replace the old code name with a more appropriate name - RPiVid.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

If an errant interrupt flag was received from a non-existent display,
a NULL pointer access was made. Protect against this by checking if a
second display is present prior to checking the interrupt flags.

Some boards take longer than 5ms to power up after a reset, so allow
a few retry attempts before giving up.

See: https://github.com/raspberrypi/linux/issues/2767



Signed-off-by: Phil Elwell <phil@raspberrypi.org>

The recent vc4-kms-v3d commit has changed the content of the
upstream overlay (even though the extra fragment is disabled).

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

The audio parameter to the vc4-kms-v3d overlay allows audio support
to be disabled (it defaults to on) by adding "audio=off" to the
dtoverlay parameters.

See: https://github.com/raspberrypi/linux/issues/2489



Signed-off-by: Phil Elwell <phil@raspberrypi.org>

Overlays are unable to remove properties in the base DTB, but they
can overwrite them. Allow a present but empty 'dmas' property
to also disable the HDMI audio interface.

See: https://github.com/raspberrypi/linux/issues/2489



Signed-off-by: Phil Elwell <phil@raspberrypi.org>

commit d7852fbd

 upstream.

It turns out that 'access()' (and 'faccessat()') can cause a lot of RCU
work because it installs a temporary credential that gets allocated and
freed for each system call.

The allocation and freeing overhead is mostly benign, but because
credentials can be accessed under the RCU read lock, the freeing
involves a RCU grace period.

Which is not a huge deal normally, but if you have a lot of access()
calls, this causes a fair amount of seconday damage: instead of having a
nice alloc/free patterns that hits in hot per-CPU slab caches, you have
all those delayed free's, and on big machines with hundreds of cores,
the RCU overhead can end up being enormous.

But it turns out that all of this is entirely unnecessary.  Exactly
because access() only installs the credential as the thread-local
subjective credential, the temporary cred pointer doesn't actually need
to be RCU free'd at all.  Once we're done using it, we can just free it
synchronously and avoid all the RCU overhead.

So add a 'non_rcu' flag to 'struct cred', which can be set by users that
know they only use it in non-RCU context (there are other potential
users for this).  We can make it a union with the rcu freeing list head
that we need for the RCU case, so this doesn't need any extra storage.

Note that this also makes 'get_current_cred()' clear the new non_rcu
flag, in case we have filesystems that take a long-term reference to the
cred and then expect the RCU delayed freeing afterwards.  It's not
entirely clear that this is required, but it makes for clear semantics:
the subjective cred remains non-RCU as long as you only access it
synchronously using the thread-local accessors, but you _can_ use it as
a generic cred if you want to.

It is possible that we should just remove the whole RCU markings for
->cred entirely.  Only ->real_cred is really supposed to be accessed
through RCU, and the long-term cred copies that nfs uses might want to
explicitly re-enable RCU freeing if required, rather than have
get_current_cred() do it implicitly.

But this is a "minimal semantic changes" change for the immediate
problem.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jan Glauber <jglauber@marvell.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Jayachandran Chandrasekharan Nair <jnair@marvell.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b70d31d0 upstream.

In preparation for fixing a deadlock between wait_for_bus_probe_idle()
and the nvdimm_bus_list_mutex arrange for __nd_ioctl() without
nvdimm_bus_list_mutex held. This also unifies the 'dimm' and 'bus' level
ioctls into a common nd_ioctl() preamble implementation.

Marked for -stable as it is a pre-requisite for a follow-on fix.

Cc: <stable@vger.kernel.org>
Fixes: bf9bccc1

 ("libnvdimm: pmem label sets and namespace instantiation")
Cc: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Jane Chu <jane.chu@oracle.com>
Link: https://lore.kernel.org/r/156341209518.292348.7183897251740665198.stgit@dwillia2-desk3.amr.corp.intel.com


Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f16d80b7 upstream.

On systems like P9 powernv where we have no TM (or P8 booted with
ppc_tm=off), userspace can construct a signal context which still has
the MSR TS bits set. The kernel tries to restore this context which
results in the following crash:

  Unexpected TM Bad Thing exception at c0000000000022fc (msr 0x8000000102a03031) tm_scratch=800000020280f033
  Oops: Unrecoverable exception, sig: 6 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in:
  CPU: 0 PID: 1636 Comm: sigfuz Not tainted 5.2.0-11043-g0a8ad0ffa4 #69
  NIP:  c0000000000022fc LR: 00007fffb2d67e48 CTR: 0000000000000000
  REGS: c00000003fffbd70 TRAP: 0700   Not tainted  (5.2.0-11045-g7142b497d8)
  MSR:  8000000102a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[E]>  CR: 42004242  XER: 00000000
  CFAR: c0000000000022e0 IRQMASK: 0
  GPR00: 0000000000000072 00007fffb2b6e560 00007fffb2d87f00 0000000000000669
  GPR04: 00007fffb2b6e728 0000000000000000 0000000000000000 00007fffb2b6f2a8
  GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR12: 0000000000000000 00007fffb2b76900 0000000000000000 0000000000000000
  GPR16: 00007fffb2370000 00007fffb2d84390 00007fffea3a15ac 000001000a250420
  GPR20: 00007fffb2b6f260 0000000010001770 0000000000000000 0000000000000000
  GPR24: 00007fffb2d843a0 00007fffea3a14a0 0000000000010000 0000000000800000
  GPR28: 00007fffea3a14d8 00000000003d0f00 0000000000000000 00007fffb2b6e728
  NIP [c0000000000022fc] rfi_flush_fallback+0x7c/0x80
  LR [00007fffb2d67e48] 0x7fffb2d67e48
  Call Trace:
  Instruction dump:
  e96a0220 e96a02a8 e96a0330 e96a03b8 394a0400 4200ffdc 7d2903a6 e92d0c00
  e94d0c08 e96d0c10 e82d0c18 7db242a6 <4c000024> 7db243a6 7db142a6 f82d0c18

The problem is the signal code assumes TM is enabled when
CONFIG_PPC_TRANSACTIONAL_MEM is enabled. This may not be the case as
with P9 powernv or if `ppc_tm=off` is used on P8.

This means any local user can crash the system.

Fix the problem by returning a bad stack frame to the user if they try
to set the MSR TS bits with sigreturn() on systems where TM is not
supported.

Found with sigfuz kernel selftest on P9.

This fixes CVE-2019-13648.

Fixes: 2b0a576d

 ("powerpc: Add new transactional memory state to the signal context")
Cc: stable@vger.kernel.org # v3.9
Reported-by: Praveen Pandey <Praveen.Pandey@in.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190719050502.405-1-mikey@neuling.org


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4d202c8c upstream.

xive_find_target_in_mask() has the following for(;;) loop which has a
bug when @first == cpumask_first(@mask) and condition 1 fails to hold
for every CPU in @mask. In this case we loop forever in the for-loop.

  first = cpu;
  for (;;) {
  	  if (cpu_online(cpu) && xive_try_pick_target(cpu)) // condition 1
		  return cpu;
	  cpu = cpumask_next(cpu, mask);
	  if (cpu == first) // condition 2
		  break;

	  if (cpu >= nr_cpu_ids) // condition 3
		  cpu = cpumask_first(mask);
  }

This is because, when @first == cpumask_first(@mask), we never hit the
condition 2 (cpu == first) since prior to this check, we would have
executed "cpu = cpumask_next(cpu, mask)" which will set the value of
@cpu to a value greater than @first or to nr_cpus_ids. When this is
coupled with the fact that condition 1 is not met, we will never exit
this loop.

This was discovered by the hard-lockup detector while running LTP test
concurrently with SMT switch tests.

 watchdog: CPU 12 detected hard LOCKUP on other CPUs 68
 watchdog: CPU 12 TB:85587019220796, last SMP heartbeat TB:85578827223399 (15999ms ago)
 watchdog: CPU 68 Hard LOCKUP
 watchdog: CPU 68 TB:85587019361273, last heartbeat TB:85576815065016 (19930ms ago)
 CPU: 68 PID: 45050 Comm: hxediag Kdump: loaded Not tainted 4.18.0-100.el8.ppc64le #1
 NIP:  c0000000006f5578 LR: c000000000cba9ec CTR: 0000000000000000
 REGS: c000201fff3c7d80 TRAP: 0100   Not tainted  (4.18.0-100.el8.ppc64le)
 MSR:  9000000002883033 <SF,HV,VEC,VSX,FP,ME,IR,DR,RI,LE>  CR: 24028424  XER: 00000000
 CFAR: c0000000006f558c IRQMASK: 1
 GPR00: c0000000000afc58 c000201c01c43400 c0000000015ce500 c000201cae26ec18
 GPR04: 0000000000000800 0000000000000540 0000000000000800 00000000000000f8
 GPR08: 0000000000000020 00000000000000a8 0000000080000000 c00800001a1beed8
 GPR12: c0000000000b1410 c000201fff7f4c00 0000000000000000 0000000000000000
 GPR16: 0000000000000000 0000000000000000 0000000000000540 0000000000000001
 GPR20: 0000000000000048 0000000010110000 c00800001a1e3780 c000201cae26ed18
 GPR24: 0000000000000000 c000201cae26ed8c 0000000000000001 c000000001116bc0
 GPR28: c000000001601ee8 c000000001602494 c000201cae26ec18 000000000000001f
 NIP [c0000000006f5578] find_next_bit+0x38/0x90
 LR [c000000000cba9ec] cpumask_next+0x2c/0x50
 Call Trace:
 [c000201c01c43400] [c000201cae26ec18] 0xc000201cae26ec18 (unreliable)
 [c000201c01c43420] [c0000000000afc58] xive_find_target_in_mask+0x1b8/0x240
 [c000201c01c43470] [c0000000000b0228] xive_pick_irq_target.isra.3+0x168/0x1f0
 [c000201c01c435c0] [c0000000000b1470] xive_irq_startup+0x60/0x260
 [c000201c01c43640] [c0000000001d8328] __irq_startup+0x58/0xf0
 [c000201c01c43670] [c0000000001d844c] irq_startup+0x8c/0x1a0
 [c000201c01c436b0] [c0000000001d57b0] __setup_irq+0x9f0/0xa90
 [c000201c01c43760] [c0000000001d5aa0] request_threaded_irq+0x140/0x220
 [c000201c01c437d0] [c00800001a17b3d4] bnx2x_nic_load+0x188c/0x3040 [bnx2x]
 [c000201c01c43950] [c00800001a187c44] bnx2x_self_test+0x1fc/0x1f70 [bnx2x]
 [c000201c01c43a90] [c000000000adc748] dev_ethtool+0x11d8/0x2cb0
 [c000201c01c43b60] [c000000000b0b61c] dev_ioctl+0x5ac/0xa50
 [c000201c01c43bf0] [c000000000a8d4ec] sock_do_ioctl+0xbc/0x1b0
 [c000201c01c43c60] [c000000000a8dfb8] sock_ioctl+0x258/0x4f0
 [c000201c01c43d20] [c0000000004c9704] do_vfs_ioctl+0xd4/0xa70
 [c000201c01c43de0] [c0000000004ca274] sys_ioctl+0xc4/0x160
 [c000201c01c43e30] [c00000000000b388] system_call+0x5c/0x70
 Instruction dump:
 78aad182 54a806be 3920ffff 78a50664 794a1f24 7d294036 7d43502a 7d295039
 4182001c 48000034 78a9d182 79291f24 <7d23482a> 2fa90000 409e0020 38a50040

To fix this, move the check for condition 2 after the check for
condition 3, so that we are able to break out of the loop soon after
iterating through all the CPUs in the @mask in the problem case. Use
do..while() to achieve this.

Fixes: 243e2511

 ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Reported-by: Indira P. Joga <indira.priya@in.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1563359724-13931-1-git-send-email-ego@linux.vnet.ibm.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3f880949

 upstream.

This conexant codec isn't in the supported codec list yet, the hda
generic driver can drive this codec well, but on a Lenovo machine
with mute/mic-mute leds, we need to apply CXT_FIXUP_THINKPAD_ACPI
to make the leds work. After adding this codec to the list, the
driver patch_conexant.c will apply THINKPAD_ACPI to this machine.

Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 70256b42 upstream.

Commit 7b9584fa ("staging: line6: Move altsetting to properties")
set a wrong altsetting for LINE6_PODHD500_1 during refactoring.

Set the correct altsetting number to fix the issue.

BugLink: https://bugs.launchpad.net/bugs/1790595
Fixes: 7b9584fa

 ("staging: line6: Move altsetting to properties")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 607975b3 upstream.

put_device will call ac97_codec_release to free
ac97_codec_device and other resources, so remove the kfree
and other redundant code.

Fixes: 74426fbf

 ("ALSA: ac97: add an ac97 bus")
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0c7d37f4

 upstream.

The base value in do_div() called by hpet_time_div() is truncated from
unsigned long to uint32_t, resulting in a divide-by-zero exception.

UBSAN: Undefined behaviour in ../drivers/char/hpet.c:572:2
division by zero
CPU: 1 PID: 23682 Comm: syz-executor.3 Not tainted 4.4.184.x86_64+ #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
 0000000000000000 b573382df1853d00 ffff8800a3287b98 ffffffff81ad7561
 ffff8800a3287c00 ffffffff838b35b0 ffffffff838b3860 ffff8800a3287c20
 0000000000000000 ffff8800a3287bb0 ffffffff81b8f25e ffffffff838b35a0
Call Trace:
 [<ffffffff81ad7561>] __dump_stack lib/dump_stack.c:15 [inline]
 [<ffffffff81ad7561>] dump_stack+0xc1/0x120 lib/dump_stack.c:51
 [<ffffffff81b8f25e>] ubsan_epilogue+0x12/0x8d lib/ubsan.c:166
 [<ffffffff81b900cb>] __ubsan_handle_divrem_overflow+0x282/0x2c8 lib/ubsan.c:262
 [<ffffffff823560dd>] hpet_time_div drivers/char/hpet.c:572 [inline]
 [<ffffffff823560dd>] hpet_ioctl_common drivers/char/hpet.c:663 [inline]
 [<ffffffff823560dd>] hpet_ioctl_common.cold+0xa8/0xad drivers/char/hpet.c:577
 [<ffffffff81e63d56>] hpet_ioctl+0xc6/0x180 drivers/char/hpet.c:676
 [<ffffffff81711590>] vfs_ioctl fs/ioctl.c:43 [inline]
 [<ffffffff81711590>] file_ioctl fs/ioctl.c:470 [inline]
 [<ffffffff81711590>] do_vfs_ioctl+0x6e0/0xf70 fs/ioctl.c:605
 [<ffffffff81711eb4>] SYSC_ioctl fs/ioctl.c:622 [inline]
 [<ffffffff81711eb4>] SyS_ioctl+0x94/0xc0 fs/ioctl.c:613
 [<ffffffff82846003>] tracesys_phase2+0x90/0x95

The main C reproducer autogenerated by syzkaller,

  syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0);
  memcpy((void*)0x20000100, "/dev/hpet\000", 10);
  syscall(__NR_openat, 0xffffffffffffff9c, 0x20000100, 0, 0);
  syscall(__NR_ioctl, r[0], 0x40086806, 0x40000000000000);

Fix it by using div64_ul().

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Zhang HongJun <zhanghongjun2@huawei.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190711132757.130092-1-wangkefeng.wang@huawei.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1be8624a

 upstream.

Add Mule Creek Canyon (PCH) MEI device ids for Elkhart Lake (EHL) Platform.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190712095814.20746-1-tomas.winkler@intel.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3d139703

 upstream.

If BITREVERSE is m and FPGA_MGR_ALTERA_PS_SPI is y,
build fails:

drivers/fpga/altera-ps-spi.o: In function `altera_ps_write':
altera-ps-spi.c:(.text+0x4ec): undefined reference to `byte_rev_table'

Select BITREVERSE to fix this.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: fcfe18f8

 ("fpga-manager: altera-ps-spi: use bitrev8x4")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20190708071356.50928-1-yuehaibing@huawei.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 49ed9694

 upstream.

Currently, a transaction to context manager from its own process
is prevented by checking if its binder_proc struct is the same as
that of the sender. However, this would not catch cases where the
process opens the binder device again and uses the new fd to send
a transaction to the context manager.

Reported-by:  <syzbot+8b3c354d33c4ac78bfad@syzkaller.appspotmail.com>
Signed-off-by: Hridya Valsaraju <hridya@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190715191804.112933-1-hridya@google.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 517c3ba0 upstream.

X86_HYPER_NATIVE isn't accurate for checking if running on native platform,
e.g. CONFIG_HYPERVISOR_GUEST isn't set or "nopv" is enabled.

Checking the CPU feature bit X86_FEATURE_HYPERVISOR to determine if it's
running on native platform is more accurate.

This still doesn't cover the platforms on which X86_FEATURE_HYPERVISOR is
unsupported, e.g. VMware, but there is nothing which can be done about this
scenario.

Fixes: 8a4b06d3

 ("x86/speculation/mds: Add sysfs reporting for MDS")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1564022349-17338-1-git-send-email-zhenzhong.duan@oracle.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d02f1aa3 upstream.

Some Lenovo 2-in-1s with a detachable keyboard have a portrait screen but
advertise a landscape resolution and pitch, resulting in a messed up
display if the kernel tries to show anything on the efifb (because of the
wrong pitch).

Fix this by adding a new DMI match table for devices which need to have
their width and height swapped.

At first it was tried to use the existing table for overriding some of the
efifb parameters, but some of the affected devices have variants with
different LCD resolutions which will not work with hardcoded override
values.

Reference: https://bugzilla.redhat.com/show_bug.cgi?id=1730783


Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190721152418.11644-1-hdegoede@redhat.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 42c16da6 upstream.

As btrfs(5) specified:

	Note
	If nodatacow or nodatasum are enabled, compression is disabled.

If NODATASUM or NODATACOW set, we should not compress the extent.

Normally NODATACOW is detected properly in run_delalloc_range() so
compression won't happen for NODATACOW.

However for NODATASUM we don't have any check, and it can cause
compressed extent without csum pretty easily, just by:
  mkfs.btrfs -f $dev
  mount $dev $mnt -o nodatasum
  touch $mnt/foobar
  mount -o remount,datasum,compress $mnt
  xfs_io -f -c "pwrite 0 128K" $mnt/foobar

And in fact, we have a bug report about corrupted compressed extent
without proper data checksum so even RAID1 can't recover the corruption.
(https://bugzilla.kernel.org/show_bug.cgi?id=199707

)

Running compression without proper checksum could cause more damage when
corruption happens, as compressed data could make the whole extent
unreadable, so there is no need to allow compression for
NODATACSUM.

The fix will refactor the inode compression check into two parts:

- inode_can_compress()
  As the hard requirement, checked at btrfs_run_delalloc_range(), so no
  compression will happen for NODATASUM inode at all.

- inode_need_compress()
  As the soft requirement, checked at btrfs_run_delalloc_range() and
  compress_file_range().

Reported-by: James Harvey <jamespharvey20@gmail.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f3dccdaa upstream.

The AMD PLL USB quirk is incorrectly enabled on newer Ryzen
chipsets. The logic in usb_amd_find_chipset_info currently checks
for unaffected chipsets rather than affected ones. This broke
once a new chipset was added in e788787e

. It makes more sense
to reverse the logic so it won't need to be updated as new
chipsets are added. Note that the core of the workaround in
usb_amd_quirk_pll does correctly check the chipset.

Signed-off-by: Ryan Kennedy <ryan5544@gmail.com>
Fixes: e788787e

 ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume")
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20190704153529.9429-2-ryan5544@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f90bf1ec upstream.

syzboot reported that
https://syzkaller.appspot.com/bug?extid=fd2bd7df88c606eea4ef

There is not consitency parameter in cluste_id_get/put calling.
In case of getting the id with result is failure, the wusbhc->cluster_id
will not be updated and this can not be used for wusb_cluster_id_put().

Tested report
https://groups.google.com/d/msg/syzkaller-bugs/0znZopp3-9k/oxOrhLkLEgAJ



Reproduce and gdb got the details:

139		addr = wusb_cluster_id_get();
(gdb) n
140		if (addr == 0)
(gdb) print addr
$1 = 254 '\376'
(gdb) n
142		result = __hwahc_set_cluster_id(hwahc, addr);
(gdb) print result
$2 = -71
(gdb) break wusb_cluster_id_put
Breakpoint 3 at 0xffffffff836e3f20: file drivers/usb/wusbcore/wusbhc.c, line 384.
(gdb) s
Thread 2 hit Breakpoint 3, wusb_cluster_id_put (id=0 '\000') at drivers/usb/wusbcore/wusbhc.c:384
384		id = 0xff - id;
(gdb) n
385		BUG_ON(id >= CLUSTER_IDS);
(gdb) print id
$3 = 255 '\377'

Reported-by:  <syzbot+fd2bd7df88c606eea4ef@syzkaller.appspotmail.com>
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190724020601.15257-1-tranmanphong@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 68037aa7

 ]

The usage is now hidden in an #ifdef, so we need to move
the variable itself in there as well to avoid this warning:

  kernel/locking/lockdep_proc.c:203:21: error: unused variable 'class' [-Werror,-Wunused-variable]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yuyang Du <duyuyang@gmail.com>
Cc: frederic@kernel.org
Fixes: 68d41d8c ("locking/lockdep: Fix lock used or unused stats error")
Link: https://lkml.kernel.org/r/20190715092809.736834-1-arnd@arndb.de


Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>