- Sep 20, 2016
-
-
Paolo Bonzini authored
Introduce a function that reads the exact nanoseconds value that is provided to the guest in kvmclock. This crystallizes the notion of kvmclock as a thin veneer over a stable TSC, that the guest will (hopefully) convert with NTP. In other words, kvmclock is *not* a paravirtualized host-to-guest NTP. Drop the get_kernel_ns() function, that was used both to get the base value of the master clock and to get the current value of kvmclock. The former use is replaced by ktime_get_boot_ns(), the latter is the purpose of get_kernel_ns(). This also allows KVM to provide a Hyper-V time reference counter that is synchronized with the time that is computed from the TSC page. Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Make the guest's kvmclock count up from zero, not from the host boot time. The guest cannot rely on that anyway because it changes on migration, the numbers are easier on the eye and finally it matches the desired semantics of the Hyper-V time reference counter. Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
We will use it in the next patches for KVM_GET_CLOCK and as a basis for the contents of the Hyper-V TSC page. Get the values from the Linux timekeeper even if kvmclock is not enabled. Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Sep 16, 2016
-
-
Luiz Capitulino authored
This commit exports the following information to user-space via the newly created per-vcpu debugfs directory: - TSC offset (as a signed number) - TSC scaling ratio - TSC scaling ratio fractinal bits The original intention of this commit was to export only the TSC offset, but the TSC scaling information is exported for completeness. We need to retrieve the TSC offset from user-space in order to support the merging of host and guest traces in trace-cmd. Today, we use the kvm_write_tsc_offset tracepoint, but it has a number of problems (mainly, it requires a running VM to be rebooted, ftrace setup, and also tracepoints are not supposed to be ABIs). The merging of host and guest traces is explained in more detail in this thread: [Qemu-devel] [RFC] host and guest kernel trace merging https://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg00887.html This commit creates the following files in debugfs: /sys/kernel/debug/kvm/66828-10/vcpu0/tsc-offset /sys/kernel/debug/kvm/66828-10/vcpu0/tsc-scaling-ratio /sys/kernel/debug/kvm/66828-10/vcpu0/tsc-scaling-ratio-frac-bits The last two are only created if TSC scaling is supported. Signed-off-by:
Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Luiz Capitulino authored
This commit adds the ability for archs to export per-vcpu information via a new per-vcpu dir in the VM's debugfs directory. If kvm_arch_has_vcpu_debugfs() returns true, then KVM will create a vcpu dir for each vCPU in the VM's debugfs directory. Then kvm_arch_create_vcpu_debugfs() is responsible for populating each vcpu directory with arch specific entries. The per-vcpu path in debugfs will look like: /sys/kernel/debug/kvm/29162-10/vcpu0 /sys/kernel/debug/kvm/29162-10/vcpu1 This is all arch specific for now because the only user of this interface (x86) wants to export x86-specific per-vcpu information to user-space. Signed-off-by:
Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Luiz Capitulino authored
Two stubs are added: o kvm_arch_has_vcpu_debugfs(): must return true if the arch supports creating debugfs entries in the vcpu debugfs dir (which will be implemented by the next commit) o kvm_arch_create_vcpu_debugfs(): code that creates debugfs entries in the vcpu debugfs dir For x86, this commit introduces a new file to avoid growing arch/x86/kvm/x86.c even more. Signed-off-by:
Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Luiz Capitulino authored
This make it possible to call kvm_destroy_vm_debugfs() from kvm_create_vm_debugfs() in error conditions. Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Luiz Capitulino authored
The TSC offset can now be read directly from struct kvm_arch_vcpu. Signed-off-by:
Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Luiz Capitulino authored
A future commit will want to easily read a vCPU's TSC offset, so we store it in struct kvm_arch_vcpu_arch for easy access. Signed-off-by:
Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Sep 13, 2016
-
-
Paolo Bonzini authored
Merge branch 'kvm-ppc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD Paul Mackerras writes: The highlights are: * Reduced latency for interrupts from PCI pass-through devices, from Suresh Warrier and me. * Halt-polling implementation from Suraj Jitindar Singh. * 64-bit VCPU statistics, also from Suraj. * Various other minor fixes and improvements.
-
Markus Elfring authored
Adjust jump labels according to the current Linux coding style convention. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
- Sep 12, 2016
-
-
Markus Elfring authored
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". * Replace the specification of a data structure by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Markus Elfring authored
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kcalloc". Suggested-by:
Paolo Bonzini <pbonzini@redhat.com> This issue was detected also by using the Coccinelle software. * Replace the specification of data structures by pointer dereferences to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Markus Elfring authored
The local variable "g2h_bitmap" will be set to an appropriate value a bit later. Thus omit the explicit initialisation at the beginning. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Markus Elfring authored
The kfree() function was called in two cases by the kvm_vcpu_ioctl_config_tlb() function during error handling even if the passed data structure element contained a null pointer. * Split a condition check for memory allocation failures. * Adjust jump targets according to the Linux coding style convention. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Markus Elfring authored
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Suresh Warrier authored
Add VCPU stat counters to track affinity for passthrough interrupts. pthru_all: Counts all passthrough interrupts whose IRQ mappings are in the kvmppc_passthru_irq_map structure. pthru_host: Counts all cached passthrough interrupts that were injected from the host through kvm_set_irq (i.e. not handled in real mode). pthru_bad_aff: Counts how many cached passthrough interrupts have bad affinity (receiving CPU is not running VCPU that is the target of the virtual interrupt in the guest). Signed-off-by:
Suresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Paul Mackerras authored
When a guest has a PCI pass-through device with an interrupt, it will direct the interrupt to a particular guest VCPU. In fact the physical interrupt might arrive on any CPU, and then get delivered to the target VCPU in the emulated XICS (guest interrupt controller), and eventually delivered to the target VCPU. Now that we have code to handle device interrupts in real mode without exiting to the host kernel, there is an advantage to having the device interrupt arrive on the same sub(core) as the target VCPU is running on. In this situation, the interrupt can be delivered to the target VCPU without any exit to the host kernel (using a hypervisor doorbell interrupt between threads if necessary). This patch aims to get passed-through device interrupts arriving on the correct core by setting the interrupt server in the real hardware XICS for the interrupt to the first thread in the (sub)core where its target VCPU is running. We do this in the real-mode H_EOI code because the H_EOI handler already needs to look at the emulated ICS state for the interrupt (whereas the H_XIRR handler doesn't), and we know we are running in the target VCPU context at that point. We set the server CPU in hardware using an OPAL call, regardless of what the IRQ affinity mask for the interrupt says, and without updating the affinity mask. This amounts to saying that when an interrupt is passed through to a guest, as a matter of policy we allow the guest's affinity for the interrupt to override the host's. This is inspired by an earlier patch from Suresh Warrier, although none of this code came from that earlier patch. Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Suresh Warrier authored
When a passthrough IRQ is handled completely within KVM real mode code, it has to also update the IRQ stats since this does not go through the generic IRQ handling code. However, the per CPU kstat_irqs field is an allocated (not static) field and so cannot be directly accessed in real mode safely. The function this_cpu_inc_rm() is introduced to safely increment per CPU fields (currently coded for unsigned integers only) that are allocated and could thus be vmalloced also. Signed-off-by:
Suresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Suresh Warrier authored
Add a module parameter kvm_irq_bypass for kvm_hv.ko to disable IRQ bypass for passthrough interrupts. The default value of this tunable is 1 - that is enable the feature. Since the tunable is used by built-in kernel code, we use the module_param_cb macro to achieve this. Signed-off-by:
Suresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Suresh Warrier authored
Dump the passthrough irqmap structure associated with a guest as part of /sys/kernel/debug/powerpc/kvm-xics-*. Signed-off-by:
Suresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Suresh Warrier authored
In existing real mode ICP code, when updating the virtual ICP state, if there is a required action that cannot be completely handled in real mode, as for instance, a VCPU needs to be woken up, flags are set in the ICP to indicate the required action. This is checked when returning from hypercalls to decide whether the call needs switch back to the host where the action can be performed in virtual mode. Note that if h_ipi_redirect is enabled, real mode code will first try to message a free host CPU to complete this job instead of returning the host to do it ourselves. Currently, the real mode PCI passthrough interrupt handling code checks if any of these flags are set and simply returns to the host. This is not good enough as the trap value (0x500) is treated as an external interrupt by the host code. It is only when the trap value is a hypercall that the host code searches for and acts on unfinished work by calling kvmppc_xics_rm_complete. This patch introduces a special trap BOOK3S_INTERRUPT_HV_RM_HARD which is returned by KVM if there is unfinished business to be completed in host virtual mode after handling a PCI passthrough interrupt. The host checks for this special interrupt condition and calls into the kvmppc_xics_rm_complete, which is made an exported function for this reason. [paulus@ozlabs.org - moved logic to set r12 to BOOK3S_INTERRUPT_HV_RM_HARD in book3s_hv_rmhandlers.S into the end of kvmppc_check_wake_reason.] Signed-off-by:
Suresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Suresh Warrier authored
Currently, KVM switches back to the host to handle any external interrupt (when the interrupt is received while running in the guest). This patch updates real-mode KVM to check if an interrupt is generated by a passthrough adapter that is owned by this guest. If so, the real mode KVM will directly inject the corresponding virtual interrupt to the guest VCPU's ICS and also EOI the interrupt in hardware. In short, the interrupt is handled entirely in real mode in the guest context without switching back to the host. In some rare cases, the interrupt cannot be completely handled in real mode, for instance, a VCPU that is sleeping needs to be woken up. In this case, KVM simply switches back to the host with trap reason set to 0x500. This works, but it is clearly not very efficient. A following patch will distinguish this case and handle it correctly in the host. Note that we can use the existing check_too_hard() routine even though we are not in a hypercall to determine if there is unfinished business that needs to be completed in host virtual mode. The patch assumes that the mapping between hardware interrupt IRQ and virtual IRQ to be injected to the guest already exists for the PCI passthrough interrupts that need to be handled in real mode. If the mapping does not exist, KVM falls back to the default existing behavior. The KVM real mode code reads mappings from the mapped array in the passthrough IRQ map without taking any lock. We carefully order the loads and stores of the fields in the kvmppc_irq_map data structure using memory barriers to avoid an inconsistent mapping being seen by the reader. Thus, although it is possible to miss a map entry, it is not possible to read a stale value. [paulus@ozlabs.org - get irq_chip from irq_map rather than pimap, pulled out powernv eoi change into a separate patch, made kvmppc_read_intr get the vcpu from the paca rather than being passed in, rewrote the logic at the end of kvmppc_read_intr to avoid deep indentation, simplified logic in book3s_hv_rmhandlers.S since we were always restoring SRR0/1 anyway, get rid of the cached array (just use the mapped array), removed the kick_all_cpus_sync() call, clear saved_xirr PACA field when we handle the interrupt in real mode, fix compilation with CONFIG_KVM_XICS=n.] Signed-off-by:
Suresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
- Sep 09, 2016
-
-
Suresh Warrier authored
Add the irq_bypass_add_producer and irq_bypass_del_producer functions. These functions get called whenever a GSI is being defined for a guest. They create/remove the mapping between host real IRQ numbers and the guest GSI. Add the following helper functions to manage the passthrough IRQ map. kvmppc_set_passthru_irq() Creates a mapping in the passthrough IRQ map that maps a host IRQ to a guest GSI. It allocates the structure (one per guest VM) the first time it is called. kvmppc_clr_passthru_irq() Removes the passthrough IRQ map entry given a guest GSI. The passthrough IRQ map structure is not freed even when the number of mapped entries goes to zero. It is only freed when the VM is destroyed. [paulus@ozlabs.org - modified to use is_pnv_opal_msi() rather than requiring all passed-through interrupts to use the same irq_chip; changed deletion so it zeroes out the r_hwirq field rather than copying the last entry down and decrementing the number of entries.] Signed-off-by:
Suresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Suresh Warrier authored
This patch introduces an IRQ mapping structure, the kvmppc_passthru_irqmap structure that is to be used to map the real hardware IRQ in the host with the virtual hardware IRQ (gsi) that is injected into a guest by KVM for passthrough adapters. Currently, we assume a separate IRQ mapping structure for each guest. Each kvmppc_passthru_irqmap has a mapping arrays, containing all defined real<->virtual IRQs. [paulus@ozlabs.org - removed irq_chip field from struct kvmppc_passthru_irqmap; changed parameter for kvmppc_get_passthru_irqmap from struct kvm_vcpu * to struct kvm *, removed small cached array.] Signed-off-by:
Suresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Suresh Warrier authored
Select IRQ_BYPASS_MANAGER for PPC when CONFIG_KVM is set. Add the PPC producer functions for add and del producer. [paulus@ozlabs.org - Moved new functions from book3s.c to powerpc.c so booke compiles; added kvm_arch_has_irq_bypass implementation.] Signed-off-by:
Suresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Suresh Warrier authored
Modify kvmppc_read_intr to make it a C function. Because it is called from kvmppc_check_wake_reason, any of the assembler code that calls either kvmppc_read_intr or kvmppc_check_wake_reason now has to assume that the volatile registers might have been modified. This also adds in the optimization of clearing saved_xirr in the case where we completely handle and EOI an IPI. Without this, the next device interrupt will require two trips through the host interrupt handling code. [paulus@ozlabs.org - made kvmppc_check_wake_reason create a stack frame when it is calling kvmppc_read_intr, which means we can set r12 to the trap number (0x500) after the call to kvmppc_read_intr, instead of using r31. Also moved the deliver_guest_interrupt label so as to restore XER and CTR, plus other minor tweaks.] Signed-off-by:
Suresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Paul Mackerras authored
This merges the topic branch 'kvm-ppc-infrastructure' into kvm-ppc-next so that I can then apply further patches that need the changes in the kvm-ppc-infrastructure branch. Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Paolo Bonzini authored
hmi.c functions are unused unless sibling_subcore_state is nonzero, and that in turn happens only if KVM is in use. So move the code to arch/powerpc/kvm/, putting it under CONFIG_KVM_BOOK3S_HV_POSSIBLE rather than CONFIG_PPC_BOOK3S_64. The sibling_subcore_state is also included in struct paca_struct only if KVM is supported by the kernel. Cc: Daniel Axtens <dja@axtens.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: kvm-ppc@vger.kernel.org Cc: kvm@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Suresh Warrier authored
This adds a new function pnv_opal_pci_msi_eoi() which does the part of end-of-interrupt (EOI) handling of an MSI which involves doing an OPAL call. This function can be called in real mode. This doesn't just export pnv_ioda2_msi_eoi() because that does a call to icp_native_eoi(), which does not work in real mode. This also adds a function, is_pnv_opal_msi(), which KVM can call to check whether an interrupt is one for which we should be calling pnv_opal_pci_msi_eoi() when we need to do an EOI. [paulus@ozlabs.org - split out the addition of pnv_opal_pci_msi_eoi() from Suresh's patch "KVM: PPC: Book3S HV: Handle passthrough interrupts in guest"; added is_pnv_opal_msi(); wrote description.] Signed-off-by:
Suresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Suresh Warrier authored
Add simple cache inhibited accessors for memory mapped I/O. Unlike the accessors built from the DEF_MMIO_* macros, these don't include any hardware memory barriers, callers need to manage memory barriers on their own. These can only be called in hypervisor real mode. Signed-off-by:
Suresh Warrier <warrier@linux.vnet.ibm.com> [paulus@ozlabs.org - added line to comment] Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Paul Mackerras authored
This replaces a 2-D search through an array with a simple 8-bit table lookup for determining the actual and/or base page size for a HPT entry. The encoding in the second doubleword of the HPTE is designed to encode the actual and base page sizes without using any more bits than would be needed for a 4k page number, by using between 1 and 8 low-order bits of the RPN (real page number) field to encode the page sizes. A single "large page" bit in the first doubleword indicates that these low-order bits are to be interpreted like this. We can determine the page sizes by using the low-order 8 bits of the RPN to look up a 256-entry table. For actual page sizes less than 1MB, some of the upper bits of these 8 bits are going to be real address bits, but we can cope with that by replicating the entries for those smaller page sizes. While we're at it, let's move the hpte_page_size() and hpte_base_page_size() functions from a KVM-specific header to a header for 64-bit HPT systems, since this computation doesn't have anything specifically to do with KVM. Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
- Sep 08, 2016
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: features and fixes for 4.9 - lazy enablement of runtime instrumentation - up to 255 CPUs for nested guests - rework of machine check deliver - cleanups/fixes
-
Christian Borntraeger authored
-
Markus Elfring authored
* Reuse existing functionality from memdup_user() instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. * Return directly if this copy operation failed. Reviewed-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Message-Id: <c86f7520-885e-2829-ae9c-b81caa898e84@users.sourceforge.net> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
Markus Elfring authored
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus reuse the corresponding function "kmalloc_array". Suggested-by:
Paolo Bonzini <pbonzini@redhat.com> This issue was detected also by using the Coccinelle software. * Replace the specification of data structures by pointer dereferences to make the corresponding size determination a bit safer according to the Linux coding style convention. * Delete the local variable "size" which became unnecessary with this refactoring. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Acked-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Message-Id: <c3323f6b-4af2-0bfb-9399-e529952e378e@users.sourceforge.net> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
David Hildenbrand authored
If the SCA entries aren't used by the hardware (no SIGPIF), we can simply not set the entries, stick to the basic sca and allow more than 64 VCPUs. To hinder any other facility from using these entries, let's properly provoke intercepts by not setting the MCN and keeping the entries unset. This effectively allows when running KVM under KVM (vSIE) or under z/VM to provide more than 64 VCPUs to a guest. Let's limit it to 255 for now, to not run into problems if the CPU numbers are limited somewhere else. Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
Fan Zhang authored
Only enable runtime instrumentation if the guest issues an RI related instruction or if userspace changes the riccb to a valid state. This makes entry/exit a tiny bit faster. Initial patch by Christian Borntraeger Signed-off-by:
Fan Zhang <zhangfan@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
Suravee Suthikulpanit authored
This patch implements update_pi_irte function hook to allow SVM communicate to IOMMU driver regarding how to set up IRTE for handling posted interrupt. In case AVIC is enabled, during vcpu_load/unload, SVM needs to update IOMMU IRTE with appropriate host physical APIC ID. Also, when vcpu_blocking/unblocking, SVM needs to update the is-running bit in the IOMMU IRTE. Both are achieved via calling amd_iommu_update_ga(). However, if GA mode is not enabled for the pass-through device, IOMMU driver will simply just return when calling amd_iommu_update_ga. Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Suravee Suthikulpanit authored
This patch introduces avic_ga_log_notifier, which will be called by IOMMU driver whenever it handles the Guest vAPIC (GA) log entry. Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-