- Jul 24, 2019
-
-
Dan Murphy authored
Create a m_can platform framework that peripheral devices can register to and use common code and register sets. The peripheral devices may provide read/write and configuration support of the IP. Acked-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Dan Murphy <dmurphy@ti.com> Acked-by:
Faiz Abbas <faiz_abbas@ti.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Dan Murphy authored
Fix checkpatch issues found during the m_can framework creation, before framework creation in the following patches. Fix these 4 check issues: CHECK: Unnecessary parentheses around 'cdev->can.state != CAN_STATE_ERROR_WARNING' if (psr & PSR_EW && (cdev->can.state != CAN_STATE_ERROR_WARNING)) { CHECK: Unnecessary parentheses around 'cdev->can.state != CAN_STATE_ERROR_PASSIVE' if ((psr & PSR_EP) && (cdev->can.state != CAN_STATE_ERROR_PASSIVE)) { CHECK: Unnecessary parentheses around 'cdev->can.state != CAN_STATE_BUS_OFF' if ((psr & PSR_BO) && (cdev->can.state != CAN_STATE_BUS_OFF)) { CHECK: Unnecessary parentheses around 'priv->version <= 31' if ((priv->version <= 31) && (irqstatus & IR_MRAF) && (m_can_read(priv, M_CAN_ECR) & ECR_RP)) { Signed-off-by:
Dan Murphy <dmurphy@ti.com> Acked-by:
Faiz Abbas <faiz_abbas@ti.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/net/can/peak_canfd/peak_pciefd_main.c:668:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/can/spi/mcp251x.c:875:7: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/can/usb/peak_usb/pcan_usb.c:422:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/can/at91_can.c:895:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/can/at91_can.c:953:15: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/can/usb/peak_usb/pcan_usb.c: In function ‘pcan_usb_decode_error’: drivers/net/can/usb/peak_usb/pcan_usb.c:422:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (n & PCAN_USB_ERROR_BUS_LIGHT) { ^ drivers/net/can/usb/peak_usb/pcan_usb.c:428:2: note: here case CAN_STATE_ERROR_WARNING: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Notice that in some cases spelling mistakes were fixed. In other cases, the /* fall through */ comment is placed at the bottom of the case statement, which is what GCC is expecting to find. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # for the at91_can.c Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Henning Colliander authored
This patch adds support for Kvaser PCIEcan devices. This includes support for up to 4 CAN channels on a single card, depending on device. Signed-off-by:
Henning Colliander <henning.colliander@evidente.se> Signed-off-by:
Jimmy Assarsson <extja@kvaser.com> Signed-off-by:
Christer Beskow <chbe@kvaser.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = alloc(sizeof(struct foo) + count * sizeof(void *)); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = alloc(struct_size(instance, entry, count)); This code was detected with the help of Coccinelle. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Ji-Ze Hong (Peter Hong) authored
This patch add support for Fintek PCIE to 2 CAN controller support Signed-off-by:
Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
This patch sorts the drivers in the Makefile alphabetically and arranges the Kconfig file accordingly. Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
This patch adds missing files to the CAN NETWORK DRIVERS and CAN NETWORK LAYER entry. Reported-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Roman Mashak authored
Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andy Shevchenko authored
The rest of Hyper-V code is using new types for UUID handling. Convert hv_sock as well. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
John Hurley says: ==================== nfp: Offload MPLS actions The module act_mpls has recently been added to the kernel. This allows the manipulation of MPLS headers on packets including push, pop and modify. Add these new actions and parameters to the intermediate representation API for hardware offload. Follow this by implementing the offload of these MPLS actions in the NFP driver. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Hurley authored
Recent additions to the kernel include a TC action module to manipulate MPLS headers on packets. Such actions are available to offload via the flow_offload intermediate representation API. Modify the NFP driver to allow the offload of MPLS set actions to firmware. Set actions update the outermost MPLS header. The offload includes a mask to specify which fields should be set. Signed-off-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Hurley authored
Recent additions to the kernel include a TC action module to manipulate MPLS headers on packets. Such actions are available to offload via the flow_offload intermediate representation API. Modify the NFP driver to allow the offload of MPLS pop actions to firmware. The act_mpls TC module enforces that the next protocol is supplied along with the pop action. Passing this to firmware allows it to properly rebuild the underlying packet after the pop. Signed-off-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Hurley authored
Recent additions to the kernel include a TC action module to manipulate MPLS headers on packets. Such actions are available to offload via the flow_offload intermediate representation API. Modify the NFP driver to allow the offload of MPLS push actions to firmware. Signed-off-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Hurley authored
A recent addition to TC actions is the ability to manipulate the MPLS headers on packets. In preparation to offload such actions to hardware, update the IR code to accept and prepare the new actions. Note that no driver currently impliments the MPLS dec_ttl action so this is not included. Signed-off-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
The structure is too large to put on the stack, resulting in a warning on 32-bit ARM: drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c:59:5: error: stack frame size of 1344 bytes in function 'mlx5e_open_xsk' [-Werror,-Wframe-larger-than=] Use kvzalloc() instead. Fixes: a038e9794541 ("net/mlx5e: Add XSK zero-copy support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chuhong Yuan authored
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chuhong Yuan authored
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chuhong Yuan authored
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chuhong Yuan authored
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chuhong Yuan authored
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chuhong Yuan authored
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chuhong Yuan authored
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chuhong Yuan authored
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chuhong Yuan authored
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
drivers/net/ethernet/faraday/ftgmac100.c:777:13: error: 'skb_frag_t {aka struct bio_vec}' has no member named 'size' Fallout from the skb_frag_t conversion to bio_vec, simply use skb_frag_size(). Fixes: b8b576a1 ("net: Rename skb_frag_t size to bv_len") Reported-by:
René van Dorst <opensource@vdorst.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Benjamin Poirier authored
The hardware has been declared EOL by the vendor more than 5 years ago. What's more relevant to the Linux kernel is that the quality of this driver is not on par with many other mainline drivers. Cc: Manish Chopra <manishc@marvell.com> Message-id: <20190617074858.32467-1-bpoirier@suse.com> Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jul 23, 2019
-
-
David S. Miller authored
Matthew Wilcox says: ==================== Convert skb_frag_t to bio_vec The skb_frag_t and bio_vec are fundamentally the same (page, offset, length) tuple. This patch series unifies the two, leaving the skb_frag_t typedef in place. This has the immediate advantage that we already have iov_iter support for bvecs and don't need to add support for iterating skbuffs. It enables a long-term plan to use bvecs more broadly within the kernel and should make network-storage drivers able to do less work converting between skbuffs and biovecs. It will consume more memory on 32-bit kernels. If that proves problematic, we can look at ways of addressing it. v3: Rebase on latest Linus with net-next merged. - Reorder the uncontroversial 'Use skb accessors' patches first so you can apply just those two if you want to hold off on the full conversion. - Convert all the users of 'struct skb_frag_struct' to skb_frag_t. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Matthew Wilcox (Oracle) authored
There are a lot of users of frag->page_offset, so use a union to avoid converting those users today. Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Matthew Wilcox (Oracle) authored
Improved compatibility with bvec Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Matthew Wilcox (Oracle) authored
One step closer to turning the skb_frag_t into a bio_vec. Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Matthew Wilcox (Oracle) authored
Match the layout of bio_vec. Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Matthew Wilcox (Oracle) authored
To increase commonality between block and net, we are going to replace the skb_frag_t with the bio_vec. This patch increases the size of skb_frag_t on 32-bit machines from 8 bytes to 12 bytes. The size is unchanged on 64-bit machines. Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Matthew Wilcox (Oracle) authored
In preparation for unifying the skb_frag and bio_vec, use the fine accessors which already exist and use skb_frag_t instead of struct skb_frag_struct. Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Matthew Wilcox (Oracle) authored
In preparation for unifying the skb_frag and bio_vec, use the fine accessors which already exist and use skb_frag_t instead of struct skb_frag_struct. Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chuhong Yuan authored
Merge the combo uses of cpu_to_le32s and memcpy. Use put_unaligned_le32 instead. This simplifies the code. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
This patch improves few aspects of rtl_rx, no functional change intended. 1. inline rtl8169_try_rx_copy 2. make pkt_size unsigned 3. use constant ETH_FCS_LEN instead of value 4 4. We just created the skb, so we don't need the checks in skb_put. Also we don't need the return value of skb_put. Set skb->tail and skb->len directly. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chuhong Yuan authored
Merge the combo use of memcpy and le32_to_cpus. Use get_unaligned_le32 instead. This simplifies the code. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chuhong Yuan authored
Merge the combo use of memcpy and le32_to_cpus. Use get_unaligned_le32 instead. This simplifies the code. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chuhong Yuan authored
Merge the combo use of memcpy and lexx_to_cpus. Use get_unaligned_lexx instead. This simplifies the code. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Acked-by:
Woojung Huh <woojung.huh@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-