- Jul 21, 2010
-
-
Alex Deucher authored
Connector is actually DVI rather than HDMI. Reported-by:
trapDoor <trapdoor6@gmail.com> Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Doug Goldstein authored
vgaarb.h was missing the #define of the #ifndef at the top for the guard to prevent multiple #include's from causing re-define errors Signed-off-by:
Doug Goldstein <cardoe@gentoo.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Francisco Jerez authored
this fixes a regression since the fbcon rework. Signed-off-by:
Francisco Jerez <currojerez@riseup.net> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Ben Skeggs authored
On nv50 it became impossible to attempt a PCI ROM shadow of the VBIOS, which will break some setups. This patch also removes the different ordering of shadow methods for pre-nv50 chipsets. The reason for the different ordering was paranoia, but it should hopefully be OK to try shadowing PRAMIN first. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
This fixes a regression caused by b2ea4aa6 due to the way shared ddc with multiple digital connectors was handled. You generally have two cases where DDC lines are shared: - HDMI + VGA - HDMI + DVI-D HDMI + VGA is easy to deal with because you can check the EDID for the to see if the attached monitor is digital. A shared DDC line with two digital connectors is more complex. You can't use the hdmi bits in the EDID since they may not be there with DVI<->HDMI adapters. In this case all we can do is check the HPD pins to see which is connected as we have no way of knowing using the EDID. Reported-by:
<trapdoor6@gmail.com> Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- Jul 20, 2010
-
-
Dave Airlie authored
A lot of 945GMs have had stability issues for a long time, this manifested as X hangs, blitter engine hangs, and lots of crashes. one such report is at: https://bugs.freedesktop.org/show_bug.cgi?id=20560 along with numerous distro bugzillas. This only took a week of digging and hair ripping to figure out. Tracked down and tested on a 945GM Lenovo T60, previously running x11perf -copypixwin500 or x11perf -copywinpix500 repeatedly would cause the GPU to wedge within 4 or 5 tries, with random busy bits set. After this patch no hangs were observed. cc: stable@kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Keith Packard authored
The i915 memory arbiter has a register full of configuration bits which are currently not defined in the driver header file. Signed-off-by:
Keith Packard <keithp@keithp.com> cc: stable@kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dan Carpenter authored
copy_to_user() returns the number of bytes remaining to be copied, but we want to return a negative error code. This gets copied to user space. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dan Carpenter authored
If the kzalloc() fails we should return NULL. All the places that call alloc_apertures() check for this already. Signed-off-by:
Dan Carpenter <error27@gmail.com> Acked-by:
James Simmons <jsimmons@infradead.org> Acked-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Kulikov Vasiliy authored
If kzalloc() fails exit with -ENOMEM. Signed-off-by:
Kulikov Vasiliy <segooon@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Ben Hutchings authored
Make inclusion of <asm/agp.h> conditional on TTM_HAS_AGP. The use of the functions declared in it is already conditional. Reported-by:
Geert Stappers <stappers@stappers.nl> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Tested-by:
Geert Stappers <stappers@stappers.nl> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- Jul 16, 2010
-
-
Alex Deucher authored
The asics in question have the following requirements with regard to their gart setups: 1. The GART aperture size has to be in the form of 2^X bytes, where X is from 25 to 31 2. The GART aperture MC base has to be aligned to a boundary equal to the size of the aperture. 3. The GART page table has to be aligned to the boundary equal to the size of the table. 4. The GART page table size is: table_entry_size * (aperture_size / page_size) 5. The GART page table has to be allocated in non-paged, non-cached, contiguous system memory. This patch takes care 2. The rest should already be handled properly. This fixes a regression noticed by: Torsten Kaiser <just.for.lkml@googlemail.com> Tested-by:
Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- Jul 14, 2010
-
-
Alex Deucher authored
Check ulBootUpMemoryClock on AMD IGPs. Fix regression noticed by Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- Jul 13, 2010
-
-
Alex Deucher authored
fixes fdo bug 26915 Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Linus Torvalds authored
-
git://git.pengutronix.de/git/ukl/linux-2.6Linus Torvalds authored
* 'arm/defconfig/reduced-v2.6.35-rc1' of git://git.pengutronix.de/git/ukl/linux-2.6: ARM: reduce defconfigs This is a big change, but results in no loss of information, despite us losing almost 200k lines: 177 files changed, 652 insertions(+), 194157 deletions(-) and Grant Likely thinks powerpc can also use the same reduction technique. The python script that did the reduction looks like this: #! /usr/bin/env python # vim: set fileencoding=utf-8 : # Copyright (C) 2010 by Uwe Kleine-König <u.kleine-koenig@pengutronix.de> import re import subprocess import os import sys # This prevents including a timestamp in the .config which makes comparing a # bit easier. os.environ['KCONFIG_NOTIMESTAMP'] = 'Yes, please' # XXX: get these using getopt kernel_tree = '' # os.path.join(os.environ['HOME'], 'gsrc', 'linux-2.6') arch = 'arm' target = sys.argv[1] defconfig_src = os.path.join(kernel_tree, 'arch/%s/configs/%s' % (arch, target)) subprocess.check_call(['make', '-s', 'ARCH=%s' % arch, target]) origconfig = list(open('.config')) config = list(origconfig) config_size = os.stat('.config').st_size i = 0 while i < len(config): print 'test for %r' % config[i] defconfig = open(defconfig_src, 'w') defconfig.writelines(config[:i]) defconfig.writelines(config[i + 1:]) defconfig.close() subprocess.check_call(['make', '-s', 'ARCH=%s' % arch, target]) if os.stat('.config').st_size == config_size and list(open('.config')) == origconfig: del config[i] else: i += 1 defconfig = open(defconfig_src, 'w') defconfig.writelines(config) defconfig.close() which is pretty self-explanatory. Acked-by:
Nicolas Pitre <nico@fluxnic.net> Acked-by:
Russell King <linux@arm.linux.org.uk> Acked-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Restore cleared pin controls on resume
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: uvc: Fix multiple symbols definitions with UVC gadget and host drivers V4L/DVB: v4l: mem2mem_testdev: fix g_fmt NULL pointer dereference V4L/DVB: uvcvideo: Power line frequency control doesn't support GET_MIN/MAX/RES V4L/DVB: ivtv: Add delay to ensure the decoder always restarts with a blank screen V4L/DVB: Documentation: Add the Philips FQ1236 MK5 to video4linux/CARDLIST.tuner V4L/DVB: tveeprom: Add an entry for tuner code 168: a TCL M30WTP-4N-E tuner V4L/DVB: tuner: Add a definition for the Philips FQ1236 MK5 NTSC tuner V4L/DVB: OMAP_VOUT: fix: Module params were not working through bootargs V4L/DVB: OMAP_VOUT: fix: Replaced dma-sg with dma-contig V4L/DVB: OMAP_VOUT:Build FIX: Rebased against latest DSS2 changes
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Send Report ID when numbered reports are sent over the control endpoint. HID: Enable HID_QUIRK_MULTI_INPUT for Retro Adaptor HID: add support for CH Eclipse yoke HID: eliminate a double lock in debug code HID: ntrig: add support for new firwmare versions HID: check for HID_QUIRK_IGNORE during probing HID: roccat: fix modules interdependencies
-
Joe Perches authored
File patterns are one per line. Fixed include file location. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Jul 12, 2010
-
-
Alan Ott authored
The Report ID wasn't sent as part of the payload for reports which were sent over the control endpoint. This is required by section 8.1 of the HID spec. Signed-off-by:
Alan Ott <alan@signal11.us> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Laurent Pinchart authored
The UVC gadget driver borrowed code from the UVC host driver without changing the symbol names. This results in a namespace clash with multiple definitions of several symbols when compiling both drivers in the kernel. Make all generic UVC functions and variables static in the UVC gadget driver, as the symbols are not referenced outside of the gadget driver. Rename the uvc_trace_param global variable to uvc_gadget_trace_param. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Fix autoloading of fschmd on recent Fujitsu machines hwmon: (coretemp) Properly label the sensors hwmon: (coretemp) Skip duplicate CPU entries hwmon: (it87) Fix in7 on IT8720F hwmon: (k8temp) Fix temperature reporting for ASB1 processor revisions
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c/mips: Fix error return codes from Sibyte i2c bus driver i2c: Fix probability check
-
Peter Edwards authored
Patch for linux-2.6.35-rc4 mainline kernel to enable Paul Qureshi's Retro Adapter [http://keio.dk/retroadapter.html], an open source USB device which allows controllers and joysticks from classic computers and consoles to work on modern PCs, to appear as two separate devices under Linux. Signed-off-by:
Peter Edwards <samwise@bagshot-row.org> Acked-by:
Paul Qureshi <retro@world3.net> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Jonathan Rockway authored
This USB flight yoke needs the NOGET quirk, like most of CH's other products. This patch adds that. Signed-off-by:
Jonathan Rockway <jon@jrock.us> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
- Jul 10, 2010
-
-
Guenter Roeck authored
Sibyte i2c bus driver returns non-descriptive error values. Update to return error values as defined in Documentation/i2c/fault-codes. Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
The new unified probing function differs from the original code, and the preliminary test whether probing is possible must be updated accordingly. Signed-off-by:
Jean Delvare <khali@linux-fr.org>
-
- Jul 09, 2010
-
-
Jean Delvare authored
Fujitsu slightly changed the DMI strings in their recent machines, (for example the D2778) and this breaks the automatic loading of the needed fschmd driver. Being more tolerant on string comparison fixes the issue. This closes bug #15634: https://bugzilla.kernel.org/show_bug.cgi?id=15634 Signed-off-by:
Jean Delvare <khali@linux-fr.org> Tested-by:
Sergey Spiridonov <sena@hurd.homeunix.org> Cc: Hans de Goede <hdegoede@redhat.com>
-
Jean Delvare authored
Don't assume that CPU entry number and core ID always match. It worked in the simple cases (single CPU, no HT) but fails on multi-CPU systems. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Acked-by:
Huaxu Wan <huaxu.wan@intel.com> Cc: stable@kernel.org
-
Jean Delvare authored
On hyper-threaded CPUs, each core appears twice in the CPU list. Skip the second entry to avoid duplicate sensors. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Acked-by:
Huaxu Wan <huaxu.wan@intel.com> Cc: stable@kernel.org
-
Jean Delvare authored
The IT8720F has no VIN7 pin, so VCCH should always be routed internally to VIN7 with an internal divider. Curiously, there still is a configuration bit to control this, which means it can be set incorrectly. And even more curiously, many boards out there are improperly configured, even though the IT8720F datasheet claims that the internal routing of VCCH to VIN7 is the default setting. So we force the internal routing in this case. It turns out that all boards with the wrong setting are from Gigabyte, so I suspect a BIOS bug. But it's easy enough to workaround in the driver, so let's do it. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Jean-Marc Spaggiari <jean-marc@spaggiari.org> Cc: stable@kernel.org
-
Andreas Herrmann authored
Reported temperature for ASB1 CPUs is too high. Add ASB1 CPU revisions (these are also non-desktop variants) to the list of CPUs for which the temperature fixup is not required. Example: (from LENOVO ThinkPad Edge 13, 01972NG, system was idle) Current kernel reports $ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +74.0 C Core0 Temp: +70.0 C Core1 Temp: +69.0 C Core1 Temp: +70.0 C With this patch I have $ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +54.0 C Core0 Temp: +51.0 C Core1 Temp: +48.0 C Core1 Temp: +49.0 C Cc: stable@kernel.org [.32.x .33.x, .34.x] Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by:
Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org>
-
Takashi Iwai authored
Many codecs now clear the pin controls at suspend via snd_hda_shutup_pins() for reducing the click noise at power-off. But this leaves some pins uninitialized, and they'll be never recovered after resume. This patch adds the proper recovery of cleared pin controls on resume. Also it adds a check of bus->shutdown so that pins won't be cleared at module unloading. Reference: Kernel bug 16339 http://bugzilla.kernel.org/show_bug.cgi?id=16339 Cc: <stable@kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Ben Hutchings authored
Extract the microcode for the QLogic QLE7220 series IB HCA and use the kernel microcode request facility to load the microcode. This supports Debian Linux's requirements to separate microcode which doesn't have open source code available from the device driver. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Roland Dreier <rolandd@cisco.com>
-
Pawel Osciak authored
Calling g_fmt before s_fmt resulted in a NULL pointer dereference as no default formats were being selected on probe. Reported-by:
Németh Márton <nm127@freemail.hu> Signed-off-by:
Pawel Osciak <p.osciak@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Laurent Pinchart authored
Issuing a GET_MIN request on the power line frequency control times out on at least the Apple iSight. As the UVC specification doesn't list GET_MIN/MAX/RES as supported on that control, remove them from the uvc_ctrls array. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Ian Armstrong authored
Add a short delay when stopping the decoder, allowing it to settle and preventing some unexpected interaction with other firmware commands. Signed-off-by:
Ian Armstrong <ian@iarmst.demon.co.uk> Tested-by:
Martin Dauskardt <martin.dauskardt@gmx.de> Signed-off-by:
Andy Walls <awalls@md.metrocast.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andy Walls authored
Signed-off-by:
Andy Walls <awalls@md.metrocast.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andy Walls authored
Hauppauge EEPROM tuner code 168 has recently shown up on HVR-1600 TV capture cards supported by the cx18 driver. This change allows analog tuner type autodetection to succeed for these cards. Information for decoding tuner code 168 was provided by Hauppauge. Signed-off-by:
Andy Walls <awalls@md.metrocast.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-