- Nov 06, 2014
-
-
Pravin B Shelar authored
Ths simplifies flow-table-destroy API. No need to pass explicit parameter about context. Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Acked-by:
Thomas Graf <tgraf@redhat.com>
-
Simon Horman authored
Allow datapath to recognize and extract MPLS labels into flow keys and execute actions which push, pop, and set labels on packets. Based heavily on work by Leo Alterman, Ravi K, Isaku Yamahata and Joe Stringer. Cc: Ravi K <rkerur@gmail.com> Cc: Leo Alterman <lalterman@nicira.com> Cc: Isaku Yamahata <yamahata@valinux.co.jp> Cc: Joe Stringer <joe@wand.net.nz> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Jesse Gross <jesse@nicira.com> Signed-off-by:
Pravin B Shelar <pshelar@nicira.com>
-
Pravin B Shelar authored
Device can export MPLS GSO support in dev->mpls_features same way it export vlan features in dev->vlan_features. So it is safe to remove NETIF_F_GSO_MPLS redundant flag. Signed-off-by:
Pravin B Shelar <pshelar@nicira.com>
-
Tom Herbert authored
When filling netlink info, dport is being returned as flags. Fix instances to return correct value. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Let the tasklet only be enabled after open(), and be disabled for the other situation. The tasklet is only necessary after open() for tx/rx, so it could be disabled by default. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
It has been reported that generating an MLD listener report on devices with large MTUs (e.g. 9000) and a high number of IPv6 addresses can trigger a skb_over_panic(): skbuff: skb_over_panic: text:ffffffff80612a5d len:3776 put:20 head:ffff88046d751000 data:ffff88046d751010 tail:0xed0 end:0xec0 dev:port1 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:100! invalid opcode: 0000 [#1] SMP Modules linked in: ixgbe(O) CPU: 3 PID: 0 Comm: swapper/3 Tainted: G O 3.14.23+ #4 [...] Call Trace: <IRQ> [<ffffffff80578226>] ? skb_put+0x3a/0x3b [<ffffffff80612a5d>] ? add_grhead+0x45/0x8e [<ffffffff80612e3a>] ? add_grec+0x394/0x3d4 [<ffffffff80613222>] ? mld_ifc_timer_expire+0x195/0x20d [<ffffffff8061308d>] ? mld_dad_timer_expire+0x45/0x45 [<ffffffff80255b5d>] ? call_timer_fn.isra.29+0x12/0x68 [<ffffffff80255d16>] ? run_timer_softirq+0x163/0x182 [<ffffffff80250e6f>] ? __do_softirq+0xe0/0x21d [<ffffffff8025112b>] ? irq_exit+0x4e/0xd3 [<ffffffff802214bb>] ? smp_apic_timer_interrupt+0x3b/0x46 [<ffffffff8063f10a>] ? apic_timer_interrupt+0x6a/0x70 mld_newpack() skb allocations are usually requested with dev->mtu in size, since commit 72e09ad1 ("ipv6: avoid high order allocations") we have changed the limit in order to be less likely to fail. However, in MLD/IGMP code, we have some rather ugly AVAILABLE(skb) macros, which determine if we may end up doing an skb_put() for adding another record. To avoid possible fragmentation, we check the skb's tailroom as skb->dev->mtu - skb->len, which is a wrong assumption as the actual max allocation size can be much smaller. The IGMP case doesn't have this issue as commit 57e1ab6e ("igmp: refine skb allocations") stores the allocation size in the cb[]. Set a reserved_tailroom to make it fit into the MTU and use skb_availroom() helper instead. This also allows to get rid of igmp_skb_size(). Reported-by:
Wei Liu <lw1a2.jing@gmail.com> Fixes: 72e09ad1 ("ipv6: avoid high order allocations") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: David L Stevens <david.stevens@oracle.com> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Using a single fixed string is smaller code size than using a format and many string arguments. Reduces overall code size a little. $ size net/ipv4/igmp.o* net/ipv6/mcast.o* net/ipv6/ip6_flowlabel.o* text data bss dec hex filename 34269 7012 14824 56105 db29 net/ipv4/igmp.o.new 34315 7012 14824 56151 db57 net/ipv4/igmp.o.old 30078 7869 13200 51147 c7cb net/ipv6/mcast.o.new 30105 7869 13200 51174 c7e6 net/ipv6/mcast.o.old 11434 3748 8580 23762 5cd2 net/ipv6/ip6_flowlabel.o.new 11491 3748 8580 23819 5d0b net/ipv6/ip6_flowlabel.o.old Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
By default the arch_fast_hash hashing function pointers are initialized to jhash(2). If during boot-up a CPU with SSE4.2 is detected they get updated to the CRC32 ones. This dispatching scheme incurs a function pointer lookup and indirect call for every hashing operation. rhashtable as a user of arch_fast_hash e.g. stores pointers to hashing functions in its structure, too, causing two indirect branches per hashing operation. Using alternative_call we can get away with one of those indirect branches. Acked-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tom Lendacky says: ==================== amd-xgbe: AMD XGBE driver updates 2014-11-04 The following series of patches includes functional updates to the driver as well as some trivial changes for function renaming and spelling fixes. - Move channel and ring structure allocation into the device open path - Rename the pre_xmit function to dev_xmit - Explicitly use the u32 data type for the device descriptors - Use page allocation for the receive buffers - Add support for split header/payload receive - Add support for per DMA channel interrupts - Add support for receive side scaling (RSS) - Add support for ethtool receive side scaling commands - Fix the spelling of descriptors - After a PCS reset, sync the PCS and PHY modes - Add dependency on HAS_IOMEM to both the amd-xgbe and amd-xgbe-phy drivers This patch series is based on net-next. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
The amd-xgbe-phy driver needs to perform ioremap calls, so add HAS_IOMEM to its build dependency. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
The amd-xgbe driver needs to perform ioremap calls, so add HAS_IOMEM to its build dependency. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
This patch adds support to sync the states of the PCS and the PHY after a reset is performed. If the PCS and the PHY are not in the same state after reset an extra mode change would be performed. This extra mode change might not be needed if the PCS and the PHY are synced up after reset. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
This patch fixes the spelling of the word "descriptor" in a couple of locations. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
This patch adds support for ethtool receive side scaling (RSS) commands. Support is added to get/set the RSS hash key and the RSS lookup table. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
This patch provides support for receive side scaling (RSS). RSS allows for spreading incoming network packets across the Rx queues. When used in conjunction with the per DMA channel interrupt support, this allows the receive processing to be spread across multiple processors. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
This patch provides support for interrupts that are generated by the Tx/Rx DMA channel pairs of the device. This allows for Tx and Rx processing to run across multiple processsors. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
Provide support for splitting IP packets so that the header and payload can be sent to different DMA addresses. This will allow the IP header to be put into the linear part of the skb while the payload can be added as frags. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
Use page allocations for Rx buffers instead of pre-allocating skbs of a set size. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
The Tx and Rx descriptors are unsigned 32 bit values. Use the u32 type, rather than unsigned int, to map these descriptors. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
The pre_xmit function name implies that it performs operations prior to transmitting the packet when in fact it is responsible for setting up the descriptors and initiating the transmit. Rename this to function from pre_xmit to dev_xmit, which is consistent with the name used during receive processing - dev_read. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
Move the channel and ring tracking structures allocation to device open. This will allow for future support to vary the number of Tx/Rx queues without unloading the module. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
WANG Cong authored
It is only used in net/ipv6/inet6_hashtables.c. Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This encapsulates all of the skb_copy_datagram_iovec() callers with call argument signature "skb, offset, msghdr->msg_iov, length". When we move to iov_iters in the networking, the iov_iter object will sit in the msghdr. Having a helper like this means there will be less places to touch during that transformation. Based upon descriptions and patch from Al Viro. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tom Herbert says: ==================== gue: Remote checksum offload This patch set implements remote checksum offload for GUE, which is a mechanism that provides checksum offload of encapsulated packets using rudimentary offload capabilities found in most Network Interface Card (NIC) devices. The outer header checksum for UDP is enabled in packets and, with some additional meta information in the GUE header, a receiver is able to deduce the checksum to be set for an inner encapsulated packet. Effectively this offloads the computation of the inner checksum. Enabling the outer checksum in encapsulation has the additional advantage that it covers more of the packet than the inner checksum including the encapsulation headers. Remote checksum offload is described in: http://tools.ietf.org/html/draft-herbert-remotecsumoffload-01 The GUE transmit and receive paths are modified to support the remote checksum offload option. The option contains a checksum offset and checksum start which are directly derived from values set in stack when doing CHECKSUM_PARTIAL. On receipt of the option, the operation is to calculate the packet checksum from "start" to end of the packet (normally derived for checksum complete), and then set the resultant value at checksum "offset" (the checksum field has already been primed with the pseudo header). This emulates a NIC that implements NETIF_F_HW_CSUM. The primary purpose of this feature is to eliminate cost of performing checksum calculation over a packet when encpasulating. In this patch set: - Move fou_build_header into fou.c and split it into a couple of functions - Enable offloading of outer UDP checksum in encapsulation - Change udp_offload to support remote checksum offload, includes new GSO type and ensuring encapsulated layers (TCP) doesn't try to set a checksum covered by RCO - TX support for RCO with GUE. This is configured through ip_tunnel and set the option on transmit when packet being encapsulated is CHECKSUM_PARTIAL - RX support for RCO with GUE for normal and GRO paths. Includes resolving the offloaded checksum v2: Address comments from davem: Move accounting for private option field in gue_encap_hlen to patch in which we add the remote checksum offload option. Testing: I ran performance numbers using netperf TCP_STREAM and TCP_RR with 200 streams, comparing GUE with and without remote checksum offload (doing checksum-unnecessary to complete conversion in both cases). These were run on mlnx4 and bnx2x. Some mlnx4 results are below. GRE/GUE TCP_STREAM IPv4, with remote checksum offload 9.71% TX CPU utilization 7.42% RX CPU utilization 36380 Mbps IPv4, without remote checksum offload 12.40% TX CPU utilization 7.36% RX CPU utilization 36591 Mbps TCP_RR IPv4, with remote checksum offload 77.79% CPU utilization 91/144/216 90/95/99% latencies 1.95127e+06 tps IPv4, without remote checksum offload 78.70% CPU utilization 89/152/297 90/95/99% latencies 1.95458e+06 tps IPIP/GUE TCP_STREAM With remote checksum offload 10.30% TX CPU utilization 7.43% RX CPU utilization 36486 Mbps Without remote checksum offload 12.47% TX CPU utilization 7.49% RX CPU utilization 36694 Mbps TCP_RR With remote checksum offload 77.80% CPU utilization 87/153/270 90/95/99% latencies 1.98735e+06 tps Without remote checksum offload 77.98% CPU utilization 87/150/287 90/95/99% latencies 1.98737e+06 tps SIT/GUE TCP_STREAM With remote checksum offload 9.68% TX CPU utilization 7.36% RX CPU utilization 35971 Mbps Without remote checksum offload 12.95% TX CPU utilization 8.04% RX CPU utilization 36177 Mbps TCP_RR With remote checksum offload 79.32% CPU utilization 94/158/295 90/95/99% latencies 1.88842e+06 tps Without remote checksum offload 80.23% CPU utilization 94/149/226 90/95/99% latencies 1.90338e+06 tps VXLAN TCP_STREAM 35.03% TX CPU utilization 20.85% RX CPU utilization 36230 Mbps TCP_RR 77.36% CPU utilization 84/146/270 90/95/99% latencies 2.08063e+06 tps We can also look at CPU time in csum_partial using perf (with bnx2x setup). For GRE with TCP_STREAM I see: With remote checksum offload 0.33% TX 1.81% RX Without remote checksum offload 6.00% TX 0.51% RX I suspect the fact that time in csum_partial noticably increases with remote checksum offload for RX is due to taking the cache miss on the encapsulated header in that function. By similar reasoning, if on the TX side the packet were not in cache (say we did a splice from a file whose data was never touched by the CPU) the CPU savings for TX would probably be more pronounced. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Add processing of the remote checksum offload option in both the normal path as well as the GRO path. The implements patching the affected checksum to derive the offloaded checksum. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Add if_tunnel flag TUNNEL_ENCAP_FLAG_REMCSUM to configure remote checksum offload on an IP tunnel. Add logic in gue_build_header to insert remote checksum offload option. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Define a private flag for remote checksun offload as well as a length for the option. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Add a new GSO type, SKB_GSO_TUNNEL_REMCSUM, which indicates remote checksum offload being done (in this case inner checksum must not be offloaded to the NIC). Added logic in __skb_udp_tunnel_segment to handle remote checksum offload case. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Add functions and basic definitions for processing standard flags, private flags, and control messages. This includes definitions to compute length of optional fields corresponding to a set of flags. Flag validation is in validate_gue_flags function. This checks for unknown flags, and that length of optional fields is <= length in guehdr hlen. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
In __skb_udp_tunnel_segment if outer UDP checksums are enabled and ip_summed is not already CHECKSUM_PARTIAL, set up checksum offload if device features allow it. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Move fou_build_header out of ip_tunnel.c and into fou.c splitting it up into fou_build_header, gue_build_header, and fou_build_udp. This allows for other users for TX of FOU or GUE. Change ip_tunnel_encap to call fou_build_header or gue_build_header based on the tunnel encapsulation type. Similarly, added fou_encap_hlen and gue_encap_hlen functions which are called by ip_encap_hlen. New net/fou.h has prototypes and defines for this. Added NET_FOU_IP_TUNNELS configuration. When this is set, IP tunnels can use FOU/GUE and fou module is also selected. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Giuseppe Cavallaro says: ==================== stmmac: review driver Koptions Recently many Koption options have been added to have new glue logic on several platforms. The main goal behind this work is to guarantee that the driver built fine on all the branches where it is present independently of which glue logic is selected. IMHO, it is better to remove all the not necessary Koption(s) that can hide build problems when something changes in the driver and especially when the DT compatibility allows us to manage all the platform data. I compiled the driver w/o any issue on net-next Git for: x86, arm and sh4. In case of there are build problems on some repos now it will be easy to catch them and cherry-pick patches from mainstream. For sure, do not hesitate to contact me in case of issue. Also this set removes STMMAC_DEBUG_FS and BUS_MODE_DA. The latter is useless and the former can be replaced by DEBUG_FS (always to make safe the build). V2: patch-set re-based on top of the latest updates for net-next ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Giuseppe CAVALLARO authored
This is a very old and often unused option to configure a bit in a register inside the DMA. This support should not stay under Koption and should be extended for new chips too. This will be do later maybe via device-tree parameters. Also no performance impact when remove this setting on STi platforms. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Giuseppe CAVALLARO authored
the STMMAC_DEBUG_FS Koption is now removed from the driver configuration and this support will be built by default when DEBUG_FS is present. This can also be useful on building driver verification. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Giuseppe CAVALLARO authored
This patch removes all the Koptions added to build the glue-logic files for all different architectures: DWMAC_MESON, DWMAC_SUNXI, DWMAC_STI ... Nowadays the stmmac needs to be compiled on several platforms; in some case it very convenient to guarantee that its build is always completed with success on all the branches where the driver is present. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Nov 05, 2014
-
-
Vladimir Zapolskiy authored
When a sysfs binary file is asked to be removed, it is found by attribute name, so strictly speaking this change is not a fix, but just in case when attribute name is changed in the driver or sysfs internals are changed, it might be better to remove the previously created file using right the same binary attribute. Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: David S. Miller <davem@davemloft.net> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florent Fourcot authored
The "else" block is on several lines and use bracket. Signed-off-by:
Florent Fourcot <florent.fourcot@enst-bretagne.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Westphal says: ==================== net: allow setting ecn via routing table Here is v4 of the patchset, its exactly the same as v3 except in patch3/3 where I added the missing 'const' qualifier to a function argument that Eric spotted during review. I preserved Erics Acks so that he doesn't have to resend them. v3 cover letter: When using syn cookies, then do not simply trust that the echoed timestamp was not modified to make sure that ecn is not turned on magically when it is disabled on the host. The first two patches, which were not part of earlier series, prepare the cookie code for the ecn route metrics change by allowing is to more easily use the existing dst object for ecn validation. The 3rd patch adds the ecn route metric feature support. It is almost the same as in v2, except that we'll now also test the dst_features when decoding a syn cookie timestamp that indicates ecn support. These three patches then allow turning on explicit congestion notification based on the destination network. For example, assuming the default tcp_ecn sysctl '2', the following will enable ecn (tcp_ecn=1 behaviour, i.e. request ecn to be enabled for a tcp connection) for all connections to hosts inside the 192.168.2/24 network: ip route change 192.168.2.0/24 dev eth0 features ecn Having a more fine-grained per-route setting can be beneficial for various reasons, for example 1) within data centers, or 2) local ISPs may deploy ECN support for their own video/streaming services [1], etc. Joint work with Daniel Borkmann, feature suggested by Hannes Frederic Sowa. The patch to enable this in iproute2 will be posted shortly, it is currently also available here: http://git.breakpoint.cc/cgit/fw/iproute2.git/commit/?h=iproute_features&id=8843d2d8973fb81c78a7efe6d42e3a17d739003e [1] http://www.ietf.org/proceedings/89/slides/slides-89-tsvarea-1.pdf , p.15 ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-