Add a mode to debugfs/drop-caches to flush unwanted requests off the GPU
(by wedging the device and resetting). This is very useful if a test
terminated leaving a long queue of hanging batches that would ordinarily
require a round trip through hangcheck for each.

It reduces the inter-test operation to just a write into drop-caches to
reset driver/GPU state between tests.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903083337.13134-5-chris@chris-wilson.co.uk

We currently try to pin and allocate the whole buffer at a time. If that
object is larger than RAM, we will try to pin the whole of physical
memory, force the machine into oom, and then still fail the allocation.

If the request is obviously too large, error out early. We opt to do
this in the backend to make it easy to use alternate paths that do not
require the entire object pinned, or may easily handle proxy objects
that are larger than physical memory.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903083337.13134-4-chris@chris-wilson.co.uk

If we fail to write the user relocation back when it is changed, force
ourselves to take the slow relocation path where we can handle faults in
the write path. There is still an element of dubiousness as having
patched up the batch to use the correct offset, it no longer matches the
presumed_offset in the relocation, so a second pass may miss any changes
in layout.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903083337.13134-3-chris@chris-wilson.co.uk

We do not explicitly mark the PTE for the user's GTT mmap as being
wrprotect, so we don't get a refault when we would need to change a
read-only mmapping into read-write. As such, we must presume that if the
vma has PROT_WRITE it may be written to, although this is supposed to be
indicated by set-domain there are cases (e.g. after swap) where
userspace may not be aware of the implicit domain change.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903083337.13134-2-chris@chris-wilson.co.uk

We only call unset_wedged on the global reset path (since it's a global
operation), so if we are terminally wedged and wish to reset, take the
full device reset path rather than the quicker individual engine resets.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903083337.13134-1-chris@chris-wilson.co.uk

Rather than inspect the global module parameter for whether full-ppgtt
maybe enabled, we can inspect the context directly as to whether it has
its own vm.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180901092451.7233-1-chris@chris-wilson.co.uk

So far we have been relying on vm->file pointer being NULL to declare
something GGTT.

This has the unfortunate consequence that the default kernel context is
also declared GGTT and interferes with the following patch which wants to
instantiate VMA's and execute requests against the kernel context.

Change the is_ggtt test to use an explicit flag in struct address_space to
solve this issue.

Note that the bit used is free since there is an alignment hole in the
struct.

v2:
 * Mark mock ggtt.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180831143643.12366-1-tvrtko.ursulin@linux.intel.com

commit afb2c443 ("drm/i915/ddi: Push pipe clock enabling to encoders")
inadvertently stopped enabling the pipe clock for any DP-MST stream
after the first one. It also rearranged the pipe clock enabling wrt.
initial MST payload allocation step (which may or may not be a
problem, but it's contrary to the spec.).

Fix things by making the above commit truly a non-functional change.

Fixes: afb2c443 ("drm/i915/ddi: Push pipe clock enabling to encoders")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107365


Reported-by: Lyude Paul <lyude@redhat.com>
Reported-by:  <dmummenschanz@web.de>
Tested-by:  <dmummenschanz@web.de>
Tested-by: Lyude Paul <lyude@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: dmummenschanz@web.de
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180831174739.30387-1-imre.deak@intel.com

Abstract the context image access a bit.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180813080218.28994-3-tvrtko.ursulin@linux.intel.com

We don't need any special treatment on error so just return as soon as
possible.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180813080218.28994-2-tvrtko.ursulin@linux.intel.com

This patch resolves the DMC FW loading issue.
Earlier DMC FW package have only one DMC FW for one stepping. But as such
there is no such restriction from Package side.
For ICL icl_dmc_ver1_07.bin binary package has DMC FW for 2 steppings.
So while reading the dmc_offset from package header, for 1st stepping
offset used to come 0x0 and was working fine till now.
But for second stepping and other steppings, offset is non zero number
and is in dwords. So we need to convert into bytes to fetch correct DMC
FW from correct place.

v2 : Added check for DMC FW max size for various gen. (Imre Deak)
v3 : Corrected naming convention for various gen. (Imre Deak)
v4 : Initialized max_fw_size to 0
v5 : Corrected DMC FW MAX_SIZE for various gen. (Imre Deak)
v6 : Fixed the typo issues.

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jyoti Yadav <jyoti.r.yadav@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1535695223-4648-1-git-send-email-jyoti.r.yadav@intel.com

Although we cannot do a full system-level test of suspend/hibernate from
deep with the kernel selftests, we can exercise the GEM subsystem in
isolation and simulate the external effects (such as losing stolen
contents and trashing the register state).

v2: Don't forget to hold rpm
v3: Suspend the GTT mappings, and more rpm!

References: https://bugs.freedesktop.org/show_bug.cgi?id=96526
References: 5ab57c70

 ("drm/i915: Flush logical context image out to memory upon suspend")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jakub Bartmiński <jakub.bartminski@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Jakub Bartmiński <jakub.bartminski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180830134806.21939-1-chris@chris-wilson.co.uk

The optimisation inherent in commit 6a2c4232 ("drm/i915: Make the
physical object coherent with GTT") relies on that once we allocated a
cursor we would have coherent, zero overhead access to the scanout plane
holding the cursor. That is we could then do the very frequent cursor
updates X enjoys with no indirection or kernel involvement. However,
that all hinges on the GGTT mmap of the cursor being pinned and not
require refaulting on each access -- handling such a page fault likely
requires the busy GGTT to be rearranged causing a stall. A very simple
fix is then to handle the physical cursor exactly like other cursors and
keep its vma pinned while active.

References: https://bugs.freedesktop.org/show_bug.cgi?id=107600
References: 6a2c4232

 ("drm/i915: Make the physical object coherent with GTT")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180817082405.755-1-chris@chris-wilson.co.uk

During stress testing of full-ppgtt (on Baytrail at least), we found
that the invalidation around a context/mm switch was insufficient (writes
would go astray). Adding a second MI_FLUSH_DW barrier prevents this, but
it is unclear as to whether this is merely a delaying tactic or if it is
truly serialising with the TLB invalidation. Either way, it is
empirically required.

v2: Avoid the loop for readability;

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107715
References: https://bugs.freedesktop.org/show_bug.cgi?id=107759


Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180830161042.29193-1-chris@chris-wilson.co.uk

We need to clear the register in order to get correct value after the
next potential hang.

v2: Centralize error register clearing in i915_irq.c (Chris)

v3: Don't read gen8 register on < gen6 (Chris)

v4: Don't swap gen8+ & gen6+ code... (Chris)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180830132424.21940-1-lionel.g.landwerlin@intel.com

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

On finishing the reset, the intention is to restart the GPU before we
relinquish the forcewake taken to handle the reset - the goal being the
GPU reloads a context before it is allowed to sleep. For this purpose,
we used tasklet_flush() which although it accomplished the goal of
restarting the GPU, carried with it a sting in its tail: it cleared the
TASKLET_STATE_SCHED bit. This meant that if another CPU queued a new
request to this engine, we would clear the flag and later attempt to
requeue the tasklet on the local CPU, breaking the per-cpu softirq
lists.

Remove the dangerous tasklet_kill() and just run the tasklet func
directly as we know it is safe to do so (the tasklets are internally
locked to allow mixed usage from direct submission).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180828152702.27536-1-chris@chris-wilson.co.uk

During power domains initialization we acquire power well references for
power wells in the INIT power domain. The rest of power wells - which
BIOS could have left enabled - we can only acquire references as needed
during display HW readout and so must defer sanitization until then
(also implying that we must always do HW readout to cleanup unused power
wells).

Thus during initialization these latter power wells can have a refcount
of 0 while still being enabled. To avoid the false-positive state
mismatch error this causes remove the check from
intel_power_domains_init_hw() and rely on the state check in
intel_power_domains_enable() which follows the HW readout.

v2:
- Add comment to log and code clarifying how unused power wells get
  disabled. (Chris)

Fixes: 6dfc4a8f ("drm/i915: Verify power domains after enabling them")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
References: https://bugs.freedesktop.org/show_bug.cgi?id=107411


Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180828122231.14336-1-imre.deak@intel.com

This patch fixes the PPS4 and PPS5 register definition macros that were
resulting into an incorect MMIO address.

Fixes: 2efbb2f0

 ("i915/dp/dsc: Add DSC PPS register definitions")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180824014807.14681-1-manasi.d.navare@intel.com

ICL requires two planes for scanning out a NV12 framebuffer. Do
not advertize support for creating NV12 framebuffers until required
plane programming is implemented.

v2: Do not allow adding buffers.
    Check inside skl_plane_has_planar (Ville)

Bspec: Plane Planar YUV programming (18566)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180824203856.17700-2-dhinakaran.pandiyan@intel.com

skl_plane_has_planar is hard to read, simplify the logic by checking for
support in the order of platform, pipe and plane.

No change in functionality intended.
v2: Fix logic for primary plane (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180827225624.4912-1-dhinakaran.pandiyan@intel.com

Y/Yf tiling can't be used with IF-ID. We already reject uncompressed
Y/Yf but we should also reject them when compressed.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180828142707.31583-2-ville.syrjala@linux.intel.com


Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Mahesh Kumar <mahesh1.sh.kumar@gmail.com>

.check_plane() already gets the plane state, so we can dig out the plane
from there if needed. No need in passing it separately.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180828142707.31583-1-ville.syrjala@linux.intel.com


Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

gcc is too smart for us and doesn't evaluate BUILD_BUG_ON()s in
unused static inlines. Collect them up in one static inline and
actually call it to make sure gcc sees it.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180828133723.18505-1-ville.syrjala@linux.intel.com


Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

Now that we have a generic caller let's simplify it and
clean up the intel_psr.c code a bit.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180827223021.7145-2-rodrigo.vivi@intel.com

No functional change. But let's get first i915 pointer
directly from intel_dp so we can clean up a lot of code
later.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180827223021.7145-1-rodrigo.vivi@intel.com

We currently verify that all doorbells can be registered with GuC and
HW but don't check that all works as expected after a db ring.

Do a nop ring of all doorbells to make sure we haven't misprogrammed
any WQ or stage descriptor data. This will also help validating
upcoming changes in the db programming flow.

Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Acked-by: Katarzyna Dec <katarzyna.dec@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180827223614.22789-1-daniele.ceraolospurio@intel.com

Added bspec reference, aligned text and documented the function.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180824230844.12428-2-dhinakaran.pandiyan@intel.com

CI runs show PSR2 does not go to IDLE with selective update enabled on
all PSR exit triggers. Specifically, logs indicate the hardware enters
"SLEEP Selective Update" and not "IDLE Reset state', like the kernel
expects, when vblank interrupts are enabled. This check was added for PSR1
but incorrectly extended to PSR2, remove the check as it breaks tests
and prints out misleading error messages.

v2: Split out non-code changes (Rodrigo)

Cc: Tarun Vyas <tarun.vyas@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: c43dbcbb

 ("drm/i915/psr: Lockless version of psr_wait_for_idle")
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180824230844.12428-1-dhinakaran.pandiyan@intel.com

This re-applies the workaround for "some DP sinks, [which] are a
little nuts" from commit 1a36147b ("drm/i915: Perform link
quality check unconditionally during long pulse").
It makes the secondary AOC E2460P monitor connected via DP to an
acer Veriton N4640G usable again.

This hunk was dropped in commit c85d200e ("drm/i915: Move SST
DP link retraining into the ->post_hotplug() hook")

Fixes: c85d200e

 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook")
[Cleaned up commit message, added stable cc]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jan-Marek Glogowski <glogow@fbihome.de>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20180825191035.3945-1-lyude@redhat.com

There's no need for that forward declaration.

Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180820233139.11936-4-paulo.r.zanoni@intel.com

Use the nice helper function to make the implementation simpler.

v2: Rebase.

Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180820233139.11936-3-paulo.r.zanoni@intel.com

None of the current lookup_power_well() callers are actually checking
for NULL return values, they all just use the pointer right away.  The
first idea was to replace these theoretical segfaults with a BUG()
since this would at least make our code a little more explicit to the
reader. It was suggested that just converting the BUG() to a WARN()
and returning any power well would probably be better since it would
still keep the system running while at the same time exposing the
driver bug.

We can only hit this NULL/BUG()/WARN() condition if we try to lookup a
power well that isn't defined on a given platform. If that ever
happens, we have to fix our code, making it lookup the correct power
well. Because of this, I don't think it's worth trying to implement
error checking in every caller. Improving our CI system will be a
better use of our time once a bug is found in the wild.

v2: Avoid the BUG() with a WARN() return a random PW (Michal).

Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180820233139.11936-2-paulo.r.zanoni@intel.com

Unlike the other ports, TC ports are not available to use as soon as
we get a hotplug. The TC PHYs can be shared between multiple
controllers: display, USB, etc. As a result, handshaking through FIA
is required around connect and disconnect to cleanly transfer
ownership with the controller and set the type-C power state.

This patch implements the flow sequences described by our
specification. We opt to grab ownership of the ports as soon as we get
the hotplugs in order to simplify the interactions and avoid surprises
in the user space side. We may consider changing this in the future,
once we improve our testing capabilities on this area.

v2:
 * This unifies the DP and HDMI patches so we can discuss everything
   at once so people looking at random single patches can actually
   understand the direction.
 * I found out the spec was updated a while ago. There's a small
   difference in the connect flow and the patch was updated for that.
 * Our spec also now gives a good explanation on what is really
   happening. As a result, comments were added.
 * Add some more comments as requested by Rodrigo (Rodrigo).
v3:
 * Downgrade a DRM_ERROR that shouldn't ever happen but we can't act
   on in case it does (Chris).

BSpec: 21750, 4250.
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180801173441.9789-1-paulo.r.zanoni@intel.com

We use kzalloc to allocate the write_buf that we use for
i2c transfer on hdcp write. But it seems that we are forgetting
to free the memory that is not needed after i2c transfer is
completed.

Reported-by: Brian J Wood <brian.j.wood@intel.com>
Fixes: 2320175f

 ("drm/i915: Implement HDCP for HDMI")
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180823205136.31310-1-rodrigo.vivi@intel.com

For S0ix we want to deinit power domains (and so deactivate the DMC
firmware) exactly when the platform supports the DC9 state. To reach
S0ix we need DC9 on these platforms (for which the DMC FW needs to be
deactivated) while to reach S0ix on the rest of the DMC platforms we
need DC6 (which needs the DMC FW to stay active).

Simplify the condition accordingly so it will be automatically
correct for upcoming DC9 platforms like ICL.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180822112602.27543-1-imre.deak@intel.com

Rename PLANE_CTL_DECOMPRESSION_ENABLE to resemble the bpsec name -
PLANE_CTL_RENDER_DECOMPRESSION_ENABLE

Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180822015053.1420-2-dhinakaran.pandiyan@intel.com

Code looks cleaner with modifiers hidden inside this wrapper.
v2: Remove const qualifier (Ville)

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180822193827.6341-1-dhinakaran.pandiyan@intel.com

Log the PSR mode/revision (PSR1 or PSR2) in the debugfs file
i915_edp_psr_status.

Suggested-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1534958628-193724-1-git-send-email-azhar.shaikh@intel.com