- Nov 10, 2018
-
-
Heiner Kallweit authored
As a heritage from the very early days of phylib member interrupts is defined as u32 even though it's just a flag whether interrupts are enabled. So we can change it to a bitfield member. In addition change the code dealing with this member in a way that it's clear we're dealing with a bool value. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-eth: defer probe on object allocate Allocatable objects on the fsl-mc bus may be probed by the fsl_mc_allocator after the first attempts of other drivers to use them. Defer the probe when this situation happens. Changes in v2: - proper handling of IS_ERR_OR_NULL ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
The fsl_mc_portal_allocate can fail when the requested MC portals are not yet probed by the fsl_mc_allocator. In this situation, the driver should defer the probe. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
The fsl_mc_object_allocate function can fail because not all allocatable objects are probed by the fsl_mc_allocator at the call time. Defer the dpaa2-eth probe when this happens. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
In the udp6 code path, we needed multiple tests to select the correct mib to be updated. Since we touch at least a counter at each iteration, it's convenient to use the recently introduced __UDPX_MIB() helper once and remove some code duplication. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
__netdev_tx_sent_queue() was added in commit e59020abf0f ("net: bql: add __netdev_tx_sent_queue()") and allows for better GSO performance. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Miroslav Lichvar says: ==================== More accurate PHC<->system clock synchronization RFC->v1: - added new patches - separated PHC timestamp from ptp_system_timestamp - fixed memory leak in PTP_SYS_OFFSET_EXTENDED - changed PTP_SYS_OFFSET_EXTENDED to work with array of arrays - fixed PTP_SYS_OFFSET_EXTENDED to break correctly from loop - fixed timecounter updates in drivers - split gettimex in igb driver - fixed ptp_read_* functions to be available without CONFIG_PTP_1588_CLOCK This series enables a more accurate synchronization between PTP hardware clocks and the system clock. The first two patches are minor cleanup/bug fixes. The third patch adds an extended version of the PTP_SYS_OFFSET ioctl, which returns three timestamps for each measurement. The idea is to shorten the interval between the system timestamps to contain just the reading of the lowest register of the PHC in order to reduce the error in the measured offset and get a smaller upper bound on the maximum error. The fourth patch deprecates the original gettime function. The remaining patches update the gettime function in order to support the new ioctl in the e1000e, igb, ixgbe, and tg3 drivers. Tests with few different NICs in different machines show that: - with an I219 (e1000e) the measured delay was reduced from 2500 to 1300 ns and the error in the measured offset, when compared to the cross timestamping supported by the driver, was reduced by a factor of 5 - with an I210 (igb) the delay was reduced from 5100 to 1700 ns - with an I350 (igb) the delay was reduced from 2300 to 750 ns - with an X550 (ixgbe) the delay was reduced from 1950 to 650 ns - with a BCM5720 (tg3) the delay was reduced from 2400 to 1200 ns ==================== Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Miroslav Lichvar authored
This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Miroslav Lichvar authored
This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Acked-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Miroslav Lichvar authored
This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Acked-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Miroslav Lichvar authored
This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Acked-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Miroslav Lichvar authored
When a driver provides gettimex64(), use it in the PTP_SYS_OFFSET ioctl and POSIX clock's gettime() instead of gettime64(). Drivers should provide only one of the functions. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Miroslav Lichvar authored
The PTP_SYS_OFFSET ioctl, which can be used to measure the offset between a PHC and the system clock, includes the total time that the driver needs to read the PHC timestamp. This typically involves reading of multiple PCI registers (sometimes in multiple iterations) and the register that contains the lowest bits of the timestamp is not read in the middle between the two readings of the system clock. This asymmetry causes the measured offset to have a significant error. Introduce a new ioctl, driver function, and helper functions, which allow the reading of the lowest register to be isolated from the other readings in order to reduce the asymmetry. The ioctl returns three timestamps for each measurement: - system time right before reading the lowest bits of the PHC timestamp - PHC time - system time immediately after reading the lowest bits of the PHC timestamp Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Miroslav Lichvar authored
If a gettime64 call fails, return the error and avoid copying data back to user. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Miroslav Lichvar authored
Reorder declarations of variables as reversed Christmas tree. Cc: Richard Cochran <richardcochran@gmail.com> Suggested-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Huazhong Tan says: ==================== hns3: add code optimization for VF reset and some new reset feature Currently hardware supports below reset: 1. VF reset: triggered by sending cmd to IMP(Integrated Management Processor). Only reset specific VF function and do not affect other PF or VF. 2. PF reset: triggered by sending cmd to IMP. Only reset specific PF and it's VF. 3. PF FLR: triggered by PCIe subsystem. Only reset specific PF and it's VF. 4. VF FLR: triggered by PCIe subsystem. Only reset specific VF function and do not affect other PF or VF. 5. Core reset: triggered by writing to register. Reset most hardware unit, such as SSU, which affects all the PF and VF. 6. Global reset: triggered by writing to register. Reset all hardware unit, which affects all the PF and VF. 7. IMP reset: triggered by IMU(Intelligent Management Unit) when IMP is not longer feeding IMU's watchdog. IMU will reload the IMP firmware and IMP will perform global reset after firmware reloading, which affects all the PF and VF. Current driver only support PF/VF reset, incomplete core and global reset(lacking the vf reset handling). So this patchset adds complete reset support in hns3 driver. Also, this patchset contains some optimization related to reset. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
This patch implements the .reset_prepare and .reset_done ops from pci framework to support the VF FLR. This patch uses hclgevf_set_def_reset_request() and hclgevf_reset_event() to handle FLR, so when hdev->default_reset_request is non zero, it means there is some reset requseted by hclgevf_set_def_reset_request() need to be processed. Also get the hdev from the ae_dev because hclgevf_reset_event is called with handle being NULL. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
While doing PF FLR, VF's PCIe configuration space will be cleared, so the pci and vector of VF should be re-initialized in the VF's reset process while PF doing FLR. Also, this patch fixes some memory not freed problem when pci re-initialization is done during reset process. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
This patch implements the .reset_prepare and .reset_done ops from pci framework to support the PF FLR. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
The current code only print the prompt message after receiving the IMP reset interrupt and does not perform the corresponding driver reset operation. This patch implements the missing IMP reset handling in the driver. 1. The driver sets the HCLGE_STATE_CMD_DISABLE to stop sending command after receiving the IMP reset interrupt. 2. The driver needs to notify the hardware to reload the IMP firmware. 3. The IMP firmware reloading makes the reset time of hardware longer, so it is necessary to extend the driver's waiting time to wait for the hardware reset to complete. 4. In hclge_check_event_cause, IMP reset event should have higher priority than other events. Also, after clearing HCLGE_STATE_CMD_DISABLE in the hclge_cmd_init(), it needs to check whether there is a pending reset, if so, just set the HCLGE_STATE_CMD_DISABLE back and return. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
When calling napi_disable during reset down process, if NAPIF_STATE_MISSED is set, napi_complete will call __napi_schedule to do the polling again. So this patch uses HNS3_NIC_STATE_DOWN to ensure the polling is not scheduled again. Also, when napi_complete returns true, it means polling is scheduled again, it is not neccssary to enable the interrupt. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
Since hclgevf_reset() may fail for some reasons, so it needs an error handler to deal with it. When VF reset failed, VF can only be restored by a higher level reset asserted by PF. So, it needs to reinitialize its command queue, then it can respond to higher level reset. Also, this patch adds error logging in the hclgevf_notify_client(). Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
According to hardware's description, after the reset occurs, the driver needs to re-initialize the command queue before sending and receiving any commands. Therefore, the VF's driver needs to identify the command queue needs to re-initialize with HCLGEVF_STATE_CMD_DISABLE, and does not allow sending or receiving commands before the re-initialization. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
When a Core/Global/IMP reset occurs, the hardware sets the reset status register of all PF/VF and reports a reset interrupt to all PF/VF and firmware. When receiving the reset interrupt: 1. The firmware will wait for 100 ms before resetting the hardware and clear the reset status register of all PF when hardware reset is done. 2. The PF/VF driver needs to down the netdev within 100 ms and then wait for hardware reset to finish. 3. After firmware clearing the reset status register of all PF, the PF driver reinitializes the hardware and clear the reset status register of it's VF. 4. After PF driver clearing the reset status register of VF, the VF driver reinitializes the hardware. This patch mainly add handling for the step 4. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
When PF performs a function reset, the hardware will reset both PF and all the VF belong to this PF. Hence, both PF's driver and VF's driver need to perform corresponding reset operations. Before PF driver asserting function reset to hardware, it firstly set up VF's hardware reset status, and inform the VF driver with HNAE3_VF_PF_FUNC_RESET, then VF driver sets this reset type to reset_pending and shechule reset task to stop IO and waits for the hardware reset status to clear. When PF driver has reinitialized the hardware and is ready to process mailbox from VF, PF driver clears VF's hardware reset status for VF to continue its reset process. Also, this patch uses readl_poll_timeout to simplify the hardware reset status waitting. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
Currently when VF need to reset itself, it will send a cmd to PF, after receiving the VF reset requset, PF sends a cmd to inform VF to enter the reset process and send a cmd to firmware to do the actual reset for the VF, it is possible that firmware has resetted the VF, but VF has not entered the reset process, which may cause IO not stopped problem when firmware is resetting VF. This patch fixes it by adjusting the VF reset process, when VF need to reset itself, it will enter the reset process first, and it will tell the PF to send cmd to firmware to reset itself. Add member reset_pending to struct hclgevf_dev, which indicates that there is reset event need to be processed by the VF's reset task, and the VF's reset task chooses the highest-level one and clears other low-level one when it processes reset_pending. hclge_inform_reset_assert_to_vf function is unused now, but it will be used to support the PF reset with VF working, so declare it in the header file. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
When doing reset, the reset handling function only need to reinitialize hardware, it makes sense to add a function to do that job. Also the error handling of hclgevf_init_hdev is different when it is used in reset process. This patch adds reset_hdev to reinitialize hardware when resetting. Also, this patch removes the hclgevf_dev_ongoing_full_reset because it is unused now. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arjun Vynipadath authored
The locally maintained list for tracking hash mac table was not freed during driver remove. Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arjun Vynipadath authored
mac_hlist was initialized during adapter_up, which will be called every time a vf device is first brought up, or every time when device is brought up again after bringing all devices down. This means our state of previous list is lost, causing a memleak if entries are present in the list. To fix that, move list init to the condition that performs initial one time adapter setup. Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arjun Vynipadath authored
The locally maintained list for tracking hash mac table was not freed during driver remove. Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Li RongQing authored
if skb is NULL pointer, and the following access of skb's skb_mstamp_ns will trigger panic, which is same as BUG_ON Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jacob Wen authored
RING_PUSH_REQUESTS_AND_CHECK_NOTIFY is already able to make sure backend sees requests before req_prod is updated. Signed-off-by:
Jacob Wen <jian.w.wen@oracle.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Nov 09, 2018
-
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: abm: move code and improve parameter validation This set starts by separating Qdisc handling code into a new file. Next two patches allow early access to TLV-based capabilities during probe, previously the capabilities were parsed just before netdevs were registered, but its cleaner to do some basic validation earlier and avoid cleanup work. Next three patches improve RED's parameter validation. First we provide a more precise message about why offload failed (and move the parameter validation to a helper). Next we make sure we don't set the top bit in the 32 bit max RED threshold value. Because FW is treating the value as signed it reportedly causes slow downs (unnecessary queuing and marking) when top bit is set with recent firmwares. Last (and perhaps least importantly) we offload the harddrop parameter of the Qdisc. We don't plan to offload harddrop RED, but it seems prudent to make sure user didn't set that flag as device behaviour would have differed. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
RED Qdisc will now inform the drivers about the state of the harddrop flag. Refuse to offload in case harddrop is set. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
To mirror software behaviour on offload more precisely inform the drivers about the state of the harddrop flag. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Turns out the threshold value is used in signed compares in the FW, so we should avoid setting the top bit. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Improve log messages printed when RED can't be offloaded because of Qdisc parameters. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
In certain cases initialization logic which follows allocation of the vNIC structure may want to validate the capabilities of that vNIC. This is easy before vNIC is initialized for normal capabilities which are at fixed offsets in control memory, easy to locate and read, but poses a challenge if the capabilities are in form of TLVs. Parse the TLVs early on so other code can just access parsed info, instead of having to do the parsing by itself. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Move setting ctrl_bar pointer to the nfp_net_alloc function, to make sure we can parse capabilities early in the following patch. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
The Qdisc offload code is logically separate, and we will soon do significant surgery on it to support more Qdiscs, so move it to a separate file. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-