- Oct 16, 2018
-
-
Eric Dumazet authored
In EDT design, I made the mistake of using tcp_wstamp_ns to store the last tcp_clock_ns() sample and to store the pacing virtual timer. This causes major regressions at high speed flows. Introduce tcp_clock_cache to store last tcp_clock_ns(). This is needed because some arches have slow high-resolution kernel time service. tcp_wstamp_ns is only updated when a packet is sent. Note that we can remove tcp_mstamp in the future since tcp_mstamp is essentially tcp_clock_cache/1000, so the apparent socket size increase is temporary. Fixes: 9799ccb0 ("tcp: add tcp_wstamp_ns socket field") Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Li RongQing authored
After per-port vlan stats, vlan stats should be released when fail to add vlan Fixes: 9163a0fc ("net: bridge: add support for per-port vlan stats") CC: bridge@lists.linux-foundation.org cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
Zhang Yu <zhangyu31@baidu.com> Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Howells authored
Add /proc/net/rxrpc/peers to display the list of peers currently active. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Add the missing unlock before return from function bsq_audit() in the error handling case. Fixes: 1d9d8be9 ("fore200e: check for dma mapping failures") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Add support for new 57500 chips. This patch-set is larger than normal because I wanted a complete series to add basic support for the new 57500 chips. The new chips have the following main differences compared to legacy chips: 1. Requires the PF driver to allocate DMA context memory as a backing store. 2. New NQ (notification queue) for interrupt events. 3. One or more CP rings can be associated with an NQ. 4. 64-bit doorbells. Most other structures and firmware APIs are compatible with legacy devices with some exceptions. For example, ring groups are no longer used and RSS table format has changed. The patch-set includes the usual firmware spec. update, some refactoring and restructuring, and adding the new code to add basic support for the new class of devices. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Add a new poll function that polls for NQ events. If the NQ event is a CQ notification, we locate the CP ring from the cq_handle and call __bnxt_poll_work() to handle RX/TX events on the CP ring. Add a new has_more_work field in struct bnxt_cp_ring_info to indicate budget has been reached. __bnxt_poll_cqs_done() is called to update or ARM the CP rings if budget has not been reached or not. If budget has been reached, the next bnxt_poll_p5() call will continue to poll from the CQ rings directly. Otherwise, the NQ will be ARMed for the next IRQ. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Separate the CP ring polling logic in bnxt_poll_work() into 2 separate functions __bnxt_poll_work() and __bnxt_poll_work_done(). Since the logic is separated, we need to add tx_pkts and events fields to struct bnxt_napi to keep track of the events to handle between the 2 functions. We also add had_work_done field to struct bnxt_cp_ring_info to indicate whether some work was performed on the CP ring. This is needed to better support the 57500 chips. We need to poll up to 2 separate CP rings before we update or ARM the CP rings on the 57500 chips. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
On legacy chips, the CP ring may be shared between RX and TX and so only setup the RX coalescing parameters in such a case. On 57500 chips, we always have a dedicated CP ring for TX so we can always set up the TX coalescing parameters in bnxt_hwrm_set_coal(). Also, the min_timer coalescing parameter applies to the NQ on the new chips and a separate firmware call needs to be made to set it up. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
In the RX code path, we current use the bnxt_napi struct pointer to identify the associated RX/CP rings. Change it to use the struct bnxt_cp_ring_info pointer instead since there are now up to 2 CP rings per MSIX. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
RSS context allocation and RSS indirection table setup are very different on the new chip. Refactor bnxt_setup_vnic() to call 2 different functions to set up RSS for the vnic based on chip type. On the new chip, the number of RSS contexts and the indirection table size depends on the number of RX rings. Each indirection table entry is also different on the new chip since ring groups are no longer used. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
On the new 57500 chips, we need to allocate one RSS context for every 64 RX rings. In previous chips, only one RSS context per vnic is required regardless of the number of RX rings. So increase the max RSS context array count to 8. Hardware ring groups are not used on the new chips. Note that the software ring group structure is still maintained in the driver to keep track of the rings associated with the vnic. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
On the new 57500 chips, we allocate/free one CP ring for each RX ring or TX ring separately. Using separate CP rings for RX/TX is an improvement as TX events will no longer be stuck behind RX events. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Firmware ring allocation semantics are slightly different for most ring types on 57500 chips. Allocation/deallocation for NQ rings are also added for the new chips. A CP ring handle is also added so that from the NQ interrupt event, we can locate the CP ring. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
On the new 57500 chips, getting the associated CP ring ID associated with an RX ring or TX ring is different than before. On the legacy chips, we find the associated ring group and look up the CP ring ID. On the 57500 chips, each RX ring and TX ring has a dedicated CP ring even if they share the MSIX. Use these helper functions at appropriate places to get the CP ring ID. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
On 57500 chips, the original bnxt_cp_ring_info struct now refers to the NQ. bp->cp_nr_rings refer to the number of NQs on 57500 chips. There are now 2 pointers for the CP rings associated with RX and TX rings. Modify bnxt_alloc_cp_rings() and bnxt_free_cp_rings() accordingly. With multiple CP rings per NAPI, we need to add a pointer in bnxt_cp_ring_info struct to point back to the bnxt_napi struct. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The ring reservation functions have to be modified for P5 chips in the following ways: - bnxt_cp_ring_info structs map to internal NQs as well as CP rings. - Ring groups are not used. - 1 CP ring must be available for each RX or TX ring. - number of RSS contexts to reserve is multiples of 64 RX rings. - RFS currently not supported. Also, RX AGG rings are only used for jumbo frames, so we need to unconditionally call bnxt_reserve_rings() in __bnxt_open_nic() to see if we need to reserve AGG rings in case MTU has changed. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Store the maximum MSIX capability in PCIe config. space earlier. When we call firmware to query capability, we need to compare the PCIe MSIX max count with the firmware count and use the smaller one as the MSIX count for 57500 (P5) chips. The new chips don't use ring groups. But previous chips do and the existing logic limits the available rings based on resource calculations including ring groups. Setting the max ring groups to the max rx rings will work on the new chips without changing the existing logic. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The 57500 series chips have a new 64-bit doorbell format. Use a new bnxt_db_info structure to unify the new and the old 32-bit doorbells. Add a new bnxt_set_db() function to set up the doorbell addreses and doorbell keys ahead of time. Modify and introduce new doorbell helpers to help abstract and unify the old and new doorbells. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
57500 series is a new chip class (P5) that requires some driver changes in the next several patches. This adds basic chip ID, doorbells, and the notification queue (NQ) structures. Each MSIX is associated with an NQ instead of a CP ring in legacy chips. Each NQ has up to 2 associated CP rings for RX and TX. The same bnxt_cp_ring_info struct will be used for the NQ. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Call firmware to configure the DMA addresses of all context memory pages on new devices requiring context memory. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
New device requires host context memory as a backing store. Call firmware to check for context memory requirements and store the parameters. Allocate host pages accordingly. We also need to move the call bnxt_hwrm_queue_qportcfg() earlier so that all the supported hardware queues and the IDs are known before checking and allocating context memory. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Newer chips require the PTU_PTE_VALID bit to be set for every page table entry for context memory and rings. Additional bits are also required for page table entries for all rings. Add a flags field to bnxt_ring_mem_info struct to specify these additional bits to be used when setting up the pages tables as needed. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Move the DMA page table and vmem fields in bnxt_ring_struct to a new bnxt_ring_mem_info struct. This will allow context memory management for a new device to re-use some of the existing infrastructure. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
New firmware spec. allows interrupt coalescing parameters, such as maximums, timer units, supported features to be queried. Update the driver to make use of the new call to query these parameters and provide the legacy defaults if the call is not available. Replace the hard-coded values with these parameters. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Support the max_ext_req_len field from the HWRM_VER_GET_RESPONSE. If this field is valid and greater than the mailbox size, use the short command format to send firmware messages greater than the mailbox size. Newer devices use this method to send larger messages to the firmware. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Latest firmware spec. has some additional rx extended port stats and new tx extended port stats added. We now need to check the size of the returned rx and tx extended stats and determine how many counters are valid. New counters added include CoS byte and packet counts for rx and tx. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Among the new changes are trusted VF support, 200Gbps support, and new API to dump ring information on the new chips. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Stefano Brivio says: ==================== selftests: pmtu: Add test choice and captures This series adds a couple of features useful for debugging: 1/2 allows selecting single tests and 2/2 adds optional traffic captures. Semantics for current invocation of test script are preserved. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefano Brivio authored
If --trace is passed as an option and tcpdump is available, capture traffic for all relevant interfaces to per-test pcap files named <test>_<interface>.pcap. Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefano Brivio authored
As number of tests is growing, it's quite convenient to allow single tests to be run. Display usage when the script is run with any invalid argument, keep existing semantics when no arguments are passed so that automated runs won't break. Instead of just looping on the list of requested tests, if any, check first that they exist, and go through them in a nested loop to keep the existing way to display test descriptions. Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
netif_device_detach() stops all tx queues already, so we don't need this call. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Simplify this function, no functional change intended. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
The newly added driver causes a warning about a function that is not used anywhere: drivers/net/ethernet/marvell/octeontx2/af/cgx.c:320:12: error: 'cgx_fwi_link_change' defined but not used [-Werror=unused-function] Remove it for now, until a user gets added. If we want to use this function from another module, we also need a declaration in a header file, which is currently missing, so it would have to change anyway. Fixes: 1463f382 ("octeontx2-af: Add support for CGX link management") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ryan C Goodfellow authored
This commit makes it possible to use devlink to split the 100G CXP Netronome into two 40G interfaces. Currently when you ask for 2 interfaces, the math in src/nfp_devlink.c:nfp_devlink_port_split calculates that you want 5 lanes per port because for some reason eth_port.port_lanes=10 (shouldn't this be 12 for CXP?). What we really want when asking for 2 breakout interfaces is 4 lanes per port. This commit makes that happen by calculating based on 8 lanes if 10 are present. Signed-off-by:
Ryan C Goodfellow <rgoodfel@isi.edu> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Greg Weeks <greg.weeks@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-eth: code cleanup There are no functional changes in this patch set, only some cleanup changes such as: unused parameters, uninitialized variables and unnecessary Kconfig dependencies. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Radulescu authored
According to the hardware ArchDef, the PTV1 field in FD[CTRL] is ignored by WRIOP, so setting it for Tx FDs is pointless. Remove all references to it from the code. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
The ch parameter is never used in the dpaa2_eth_tx_conf function but since its prototype must match the type defined in the consume field of struct dpaa2_eth_fq, just mark it as __always_unused. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
The priv parameter is never used in the build_linear_skb and drain_channel function. Remove it from the function definitions. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
All 3 cases of possible uninitialized variables are false positives since they are used only as output parameters. Nonetheless, fix the warnings. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-