- Jan 16, 2014
-
-
Veaceslav Falico authored
Currently, we don't rename the upper/lower_ifc symlinks in /sys/class/net/*/ , which might result stale/duplicate links/names. Fix this by adding netdev_adjacent_rename_links(dev, oldname) which renames all the upper/lower interface's links to dev from the upper/lower_oldname to the new name. We don't need a rollback because only we control these symlinks and if we fail to rename them - sysfs will anyway complain. Reported-by:
Ding Tianhong <dingtianhong@huawei.com> CC: Ding Tianhong <dingtianhong@huawei.com> CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
They clean up the code a bit and can be used further. CC: Ding Tianhong <dingtianhong@huawei.com> CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vince Bridgers authored
GRO requires VLANs to be removed before aggregation can occur. The Synopsys EMAC does not strip VLAN tags so this must be done by the driver. Signed-off-by:
Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Fix new sparse warning about function declared static. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Richard Weinberger authored
On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/built-in.o: In function `lpc32xx_adc_probe': drivers/staging/iio/adc/lpc32xx_adc.c:149: undefined reference to `devm_ioremap' Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Richard Weinberger authored
On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/built-in.o: In function `goldfish_battery_probe': drivers/power/goldfish_battery.c:181: undefined reference to `devm_ioremap' Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Richard Weinberger authored
On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/built-in.o: In function `orion_mdio_probe': drivers/net/ethernet/marvell/mvmdio.c:228: undefined reference to `devm_ioremap' Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Richard Weinberger authored
On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/built-in.o: In function `exynos_mipi_video_phy_probe': drivers/phy/phy-exynos-mipi-video.c:130: undefined reference to `devm_ioremap_resource' Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Richard Weinberger authored
On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/staging/iio/adc/spear_adc.c: In function ‘spear_adc_probe’: drivers/staging/iio/adc/spear_adc.c:393:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Richard Weinberger authored
On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/staging/dgap/dgap_driver.c: In function ‘dgap_cleanup_board’: drivers/staging/dgap/dgap_driver.c:457:3: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] drivers/staging/dgap/dgap_driver.c: In function ‘dgap_do_remap’: drivers/staging/dgap/dgap_driver.c:694:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Richard Weinberger authored
On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/ptp/ptp_pch.c: In function ‘pch_remove’: drivers/ptp/ptp_pch.c:571:3: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] drivers/ptp/ptp_pch.c: In function ‘pch_probe’: drivers/ptp/ptp_pch.c:621:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eugene Crosser authored
Introduce functions to enable and disable bridgeport address notification feature, sysfs attributes for access to these functions from userspace, and udev events emitted when a host joins or exits a bridgeport-enabled HiperSocket channel. Signed-off-by:
Eugene Crosser <eugene.crosser@ru.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eugene Crosser authored
Introduce function for the "Perform network-subchannel operation" CHSC command with operation code "bridgeport information", and bit definitions for "characteristics" pertaning to this command. Signed-off-by:
Eugene Crosser <eugene.crosser@ru.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eugene Crosser authored
Introduce functions to assign roles and check state of bridgeport-capable HiperSocket devices, and sysfs attributes providing access to these functions from userspace. Introduce udev events emitted when the state of a bridgeport device changes. Signed-off-by:
Eugene Crosser <eugene.crosser@ru.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
introduced by: commit 1f9248e5 "neigh: convert parms to an array" Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Claudiu Manoil authored
Fixes unhandled register write in gianfar_ethtool.c. Fixes following endianess related functional issues, reported by sparse as well, i.e.: gianfar_ethtool.c:1058:33: warning: incorrect type in argument 1 (different base types) expected unsigned int [unsigned] [usertype] value got restricted __be32 [usertype] ip4src gianfar_ethtool.c:1164:33: warning: restricted __be16 degrades to integer gianfar_ethtool.c:1669:32: warning: invalid assignment: ^= left side has type restricted __be16 right side has type int Solves all the sparse warnings for mixig normal pointers with __iomem pointers for gianfar_ptp.c, i.e.: gianfar_ptp.c:163:32: warning: incorrect type in argument 1 (different address spaces) expected unsigned int [noderef] <asn:2>*addr got unsigned int *<noident> Signed-off-by:
Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julia Lawall authored
Delete a variable that is at most only assigned to a constant, but never used otherwise. In this code, it is the variable result that is used for the return code, not rc. A simplified version of the semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/ ) // <smpl> @@ type T; identifier i; constant c; @@ -T i; <... when != i -i = c; ...> // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jan 15, 2014
-
-
David S. Miller authored
Aaron Brown says: ==================== Intel Wired LAN Driver Updates This series contains updates to i40e from Greg Rose for VLAN filtering. Greg Rose (2): i40e: Warn admin to reload VF driver on port VLAN configuration. When an administrator sets a port VLAN filters for the virtual function (VF) after the VF has already set its own VLAN filters a conflict requiring the VF be reloaded can occur. This patch logs a message indicating to the system administrator that the VF driver must be reloaded for the new port VLAN settings to take effect i40e: Retain MAC filters on port VLAN deletion On port VLAN deletion the list of MAC filters for the virtual function (VF) VSI were all deleted. Let's keep them around, they come in handy for keeping the VF functional. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Greg Rose authored
On port VLAN deletion the list of MAC filters for the virtual function (VF) VSI were all deleted. Let's keep them around, they come in handy for keeping the VF functional. Change-Id: I335e760392f274dc8b8b40efcb708f65b49d7973 Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Greg Rose authored
The i40e Physical Function (PF) driver will allow the Virtual Function (VF) driver to configure its own VLAN filters if no port VLAN filter has been configured. This leads to the possibility of the administrator setting a port VLAN filter for the VF after the VF has already configured its own VLAN filters. This leads to a conflict that can only be resolved by reloading the VF driver. When the conflicting administrative command is detected in setting the port VLAN then log a message indicating to the system administrator that he must now reload the VF driver for the new port VLAN settings to take effect. Change-Id: I8de73b885d944a043aff32226297e4249862bcad Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Daniel Borkmann says: ==================== vxlan updates Did the split into two patches upon request from Cong Wang. Changelog: v1->v2: - Removed BUG_ON as it's not needed. v2->v3: - Removed dev->reg_state check for netns. v3->v4: - Removed list_del(), we seem to do it in some places and in some others not; we agreed it's not really necessary. - Split patch into 2 patches, notifier part and module unload cleanup part. ==================== Reviewed-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
We should use vxlan_dellink() handler in vxlan_exit_net(), since i) we're not in fast-path and we should be consistent in dismantle just as we would remove a device through rtnl ops, and more importantly, ii) in case future code will kfree() memory in vxlan_dellink(), we would leak it right here unnoticed. Therefore, do not only half of the cleanup work, but make it properly. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
We can create a vxlan device with an explicit underlying carrier. In that case, when the carrier link is being deleted from the system (e.g. due to module unload) we should also clean up all created vxlan devices on top of it since otherwise we're in an inconsistent state in vxlan device. In that case, the user needs to remove all such devices, while in case of other virtual devs that sit on top of physical ones, it is usually the case that these devices do unregister automatically as well and do not leave the burden on the user. This work is not necessary when vxlan device was not created with a real underlying device, as connections can resume in that case when driver is plugged again. But at least for the other cases, we should go ahead and do the cleanup on removal. We don't register the notifier during vxlan_newlink() here since I consider this event rather rare, and therefore we should not bloat vxlan's core structure unecessary. Also, we can simply make use of unregister_netdevice_many() to batch that. fdb is flushed upon ndo_stop(). E.g. `ip -d link show vxlan13` after carrier removal before this patch: 5: vxlan13: <BROADCAST,MULTICAST> mtu 1450 qdisc noop state DOWN mode DEFAULT group default link/ether 1e:47:da:6d:4d:99 brd ff:ff:ff:ff:ff:ff promiscuity 0 vxlan id 13 group 239.0.0.10 dev 2 port 32768 61000 ageing 300 ^^^^^ Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Aaron Brown says: ==================== Intel Wired LAN Driver Updates, ixgbe: Add LER support The following patches add Live Error Recovery (LER) support to the ixgbe driver. This support also improves behavior in Thunderbolt environments. This involves checking all register reads for a value of all ones and when that is seen, to read the status register, which should never properly return all ones, to confirm whether the received value was correct. When this detects a removal, the hw_addr field is cleared to indicate the removal. This then blocks subsequent access to the device registers. All register access macros have been changed to static inline functions and all register accesses now use them.· Macro versions are temporarily provided. The __IXGBE_DOWN bit is no longer overloaded to also mean that device removal has been initiated. Now the bit can be used to protect ixgbe_down from multiple entry via test_and_set_bit. A needed smp_mb__before_clear_bit was also added. V2 Changes: - Use ACCESS_ONCE where needed, thanks to Ben Hutchings - Fix crash on module removal - Use boolean values for boolean returns instead of 0 and 1 - Reword Kconfig help text V3 Changes: - Drop config option, per David Miller - Drop tail register write checks, per Alexander Duyck - Change writeq implementation to a static inline, thanks to Joe Perches V4 Changes: - Change __IXGBE_REMOVE to __IXGBE_REMOVING, per Scott Feldman's comment - Add #define writeq writeq, per Alexander Duyck - Change static inline functions to lower case, per David Miller - Use new lower case names in added and modified register accesses - Provide temporary upper case macros for register access functions - Change IXGBE_REMOVED from macro to static inline and change references - Correct IXGBE_WRITE_FLUSH to properly enclose parameter expansion ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mark Rustad authored
Additional checks are needed for a detected removal not to cause problems. Some involve simply avoiding a lot of stuff that can't do anything good, and also cases where the phony return value can cause problems. In addition, down the adapter when the removal is sensed. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mark Rustad authored
Prevent writes to an adapter that has been detected as removed by a previous failing read. This also fixes some include file ordering confusion that this patch revealed. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mark Rustad authored
Check all register reads for adapter removal by checking the status register after any register read that returns 0xFFFFFFFF. Since the status register will never return 0xFFFFFFFF unless the adapter is removed, such a value from a status register read confirms the removal. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mark Rustad authored
Make the ethtool register test use the normal register accessor functions. Also eliminate macros used for calling register test functions to make error exits clearer. Use boolean values for boolean returns instead of 0 and 1. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mark Rustad authored
Kernel coding standard prefers static inline functions instead of macros, so use them for register accessors. This is to prepare for adding LER, Live Error Recovery, checks to those accessors. Temporarily provide macros for calling the new static inline accessors until all references are changed. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mark Rustad authored
The ixgbe_down function can now prevent multiple executions by doing test_and_set_bit on __IXGBE_DOWN. This did not work before introduction of the __IXGBE_REMOVING bit, because of overloading of __IXGBE_DOWN. Also add smp_mb__before_clear_bit call before clearing the __IXGBE_DOWN bit. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mark Rustad authored
Add a bit, __IXGBE_REMOVING, to indicate that the module is being removed. The __IXGBE_DOWN bit had been overloaded for this purpose, but that leads to trouble. A few places now check both __IXGBE_DOWN and __IXGBE_REMOVE. Notably, setting either bit will prevent service task execution. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Aaron Brown says: ==================== Intel Wired LAN Driver Updates This series contains updates to i40e that are primarily minor fixes or general cleanup. Shannon fixes a bug where the VMDq queue is not associated with the right setup within the hardware. Mitch provides a patch adjusting where the VF is reset and another one adding meaningful context to a message. Jesse cleans up white space comments and parenthesis. Catherine bumps the version. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Catherine Sullivan authored
Update the driver version to 0.3.30-k. Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesse Brandeburg authored
Remove some un-necessary parenthesis. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesse Brandeburg authored
Fix some whitespace and comment issues. Change-ID: I1587599e50ce66fd389965720e86f9e331d86643 Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mitch Williams authored
Make this message mean something, rather than just spitting out a VSI id without any context whatsoever. Change-ID: Iafb906c6db46d4b5dcbe84adc9ed44730d08bd42 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
Fix a bug where the queue was not associated with the right set-up within the hardware. The fix is to use the right QTX_CTL VSI type when associating it to the VSI. Change-ID: I65ef6c5a8205601c640a6593e4b7e78d6ba45545 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mitch Williams authored
This write done at the end of VF reset and should not be performed here. Change-ID: I4d89813b68c6173184293868a6f26cf559bc2405 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
tcp_gso_segment() and tcp_gro_receive() no longer need to be exported. IPv4 and IPv6 offloads are statically linked. Note that tcp_gro_complete() is still used by bnx2x, unfortunately. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ying Xue says: ==================== use appropriate APIs to get interfaces Under rtnl_lock protection, we should use __dev_get_name/index() rather than dev_get_name()/index() to find interface handlers because the former interfaces can help us avoid to change interface reference counter. v2 changes: - Change return value of nl80211_set_wiphy() to 0 in patch #10 by johannes's suggestion. - Add 'Acked-by' into several patches which were acknowledged by corresponding maintainers. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-