Skip to content
  1. Jul 17, 2010
    • Bjorn Helgaas's avatar
      PCI: fall back to original BIOS BAR addresses · 58c84eda
      Bjorn Helgaas authored 
      

If we fail to assign resources to a PCI BAR, this patch makes us try the
original address from BIOS rather than leaving it disabled.

Linux tries to make sure all PCI device BARs are inside the upstream
PCI host bridge or P2P bridge apertures, reassigning BARs if necessary.
Windows does similar reassignment.

Before this patch, if we could not move a BAR into an aperture, we left
the resource unassigned, i.e., at address zero.  Windows leaves such BARs
at the original BIOS addresses, and this patch makes Linux do the same.

This is a bit ugly because we disable the resource long before we try to
reassign it, so we have to keep track of the BIOS BAR address somewhere.
For lack of a better place, I put it in the struct pci_dev.

I think it would be cleaner to attempt the assignment immediately when the
claim fails, so we could easily remember the original address.  But we
currently claim motherboard resources in the middle, after attempting to
claim PCI resources and before assigning new PCI resources, and changing
that is a fairly big job.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16263

Reported-by: default avatarAndrew <nitr0@seti.kr.ua>
Tested-by: default avatarAndrew <nitr0@seti.kr.ua>
Signed-off-by: default avatarBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
      58c84eda
  3. Jul 15, 2010
  5. Jul 14, 2010
  7. Jul 13, 2010
  9. Jul 12, 2010
  11. Jul 10, 2010
    • Russell King's avatar
      ARM: lockdep: fix unannotated irqs-on · ac78884e
      Russell King authored 
      CPU: Testing write buffer coherency: ok
------------[ cut here ]------------
WARNING: at kernel/lockdep.c:3145 check_flags+0xcc/0x1dc()
Modules linked in:
[<c0035120>] (unwind_backtrace+0x0/0xf8) from [<c0355374>] (dump_stack+0x20/0x24)
[<c0355374>] (dump_stack+0x20/0x24) from [<c0060c04>] (warn_slowpath_common+0x58/0x70)
[<c0060c04>] (warn_slowpath_common+0x58/0x70) from [<c0060c3c>] (warn_slowpath_null+0x20/0x24)
[<c0060c3c>] (warn_slowpath_null+0x20/0x24) from [<c008f224>] (check_flags+0xcc/0x1dc)
[<c008f224>] (check_flags+0xcc/0x1dc) from [<c00945dc>] (lock_acquire+0x50/0x140)
[<c00945dc>] (lock_acquire+0x50/0x140) from [<c0358434>] (_raw_spin_lock+0x50/0x88)
[<c0358434>] (_raw_spin_lock+0x50/0x88) from [<c00fd114>] (set_task_comm+0x2c/0x60)
[<c00fd114>] (set_task_comm+0x2c/0x60) from [<c007e184>] (kthreadd+0x30/0x108)
[<c007e184>] (kthreadd+0x30/0x108) from [<c0030104>] (kernel_thread_exit+0x0/0x8)
---[ end trace 1b75b31a2719ed1c ]---
possible reason: unannotated irqs-on.
irq event stamp: 3
hardirqs last  enabled at (2): [<c0059bb0>] finish_task_switch+0x48/0xb0
hardirqs last disabled at (3): [<c002f0b0>] ret_slow_syscall+0xc/0x1c
softirqs last  enabled at (0): [<c005f3e0>] copy_process+0x394/0xe5c
softirqs last disabled at (0): [<(null)>] (null)

Fix this by ensuring that the lockdep interrupt state is manipulated in
the appropriate places.  We essentially treat userspace as an entirely
separate environment which isn't relevant to lockdep (lockdep doesn't
monitor userspace.)  We don't tell lockdep that IRQs will be enabled
in that environment.

Instead, when creating kernel threads (which is a rare event compared
to entering/leaving userspace) we have to update the lockdep state.  Do
this by starting threads with IRQs disabled, and in the kthread helper,
tell lockdep that IRQs are enabled, and enable them.

This provides lockdep with a consistent view of the current IRQ state
in kernel space.

This also revert portions of 0d928b0b


which didn't fix the problem.

Tested-by: default avatarMing Lei <tom.leiming@gmail.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      ac78884e
    • Guenter Roeck's avatar
      i2c/mips: Fix error return codes from Sibyte i2c bus driver · 102b59c6
      Guenter Roeck authored 
      

Sibyte i2c bus driver returns non-descriptive error values.
Update to return error values as defined in Documentation/i2c/fault-codes.

Signed-off-by: default avatarGuenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
      102b59c6
    • Jean Delvare's avatar
      i2c: Fix probability check · 827900c5
      Jean Delvare authored 
      

The new unified probing function differs from the original code, and
the preliminary test whether probing is possible must be updated
accordingly.

Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
      827900c5
  13. Jul 09, 2010
    • Jean Delvare's avatar
      hwmon: Fix autoloading of fschmd on recent Fujitsu machines · faabd47f
      Jean Delvare authored 
      

Fujitsu slightly changed the DMI strings in their recent machines,
(for example the D2778) and this breaks the automatic loading of the
needed fschmd driver. Being more tolerant on string comparison fixes
the issue.

This closes bug #15634:
https://bugzilla.kernel.org/show_bug.cgi?id=15634

Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
Tested-by: default avatarSergey Spiridonov <sena@hurd.homeunix.org>
Cc: Hans de Goede <hdegoede@redhat.com>
      faabd47f
    • Jean Delvare's avatar
      hwmon: (coretemp) Properly label the sensors · 3f4f09b4
      Jean Delvare authored 
      

Don't assume that CPU entry number and core ID always match. It
worked in the simple cases (single CPU, no HT) but fails on
multi-CPU systems.

Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
Acked-by: default avatarHuaxu Wan <huaxu.wan@intel.com>
Cc: stable@kernel.org
      3f4f09b4
    • Jean Delvare's avatar
      hwmon: (coretemp) Skip duplicate CPU entries · d883b9f0
      Jean Delvare authored 
      

On hyper-threaded CPUs, each core appears twice in the CPU list. Skip
the second entry to avoid duplicate sensors.

Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
Acked-by: default avatarHuaxu Wan <huaxu.wan@intel.com>
Cc: stable@kernel.org
      d883b9f0
    • Jean Delvare's avatar
      hwmon: (it87) Fix in7 on IT8720F · 436cad2a
      Jean Delvare authored 
      

The IT8720F has no VIN7 pin, so VCCH should always be routed
internally to VIN7 with an internal divider. Curiously, there still
is a configuration bit to control this, which means it can be set
incorrectly. And even more curiously, many boards out there are
improperly configured, even though the IT8720F datasheet claims that
the internal routing of VCCH to VIN7 is the default setting. So we
force the internal routing in this case.

It turns out that all boards with the wrong setting are from Gigabyte,
so I suspect a BIOS bug. But it's easy enough to workaround in the
driver, so let's do it.

Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
Cc: Jean-Marc Spaggiari <jean-marc@spaggiari.org>
Cc: stable@kernel.org
      436cad2a
    • Andreas Herrmann's avatar
      hwmon: (k8temp) Fix temperature reporting for ASB1 processor revisions · d535bad9
      Andreas Herrmann authored 
      

Reported temperature for ASB1 CPUs is too high.
Add ASB1 CPU revisions (these are also non-desktop variants) to the
list of CPUs for which the temperature fixup is not required.

Example: (from LENOVO ThinkPad Edge 13, 01972NG, system was idle)

  Current kernel reports

  $ sensors
  k8temp-pci-00c3
  Adapter: PCI adapter
  Core0 Temp:  +74.0 C
  Core0 Temp:  +70.0 C
  Core1 Temp:  +69.0 C
  Core1 Temp:  +70.0 C

  With this patch I have

  $ sensors
  k8temp-pci-00c3
  Adapter: PCI adapter
  Core0 Temp:  +54.0 C
  Core0 Temp:  +51.0 C
  Core1 Temp:  +48.0 C
  Core1 Temp:  +49.0 C

Cc: stable@kernel.org [.32.x .33.x, .34.x]
Cc: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: default avatarAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
      d535bad9
    • Linus Walleij's avatar
      ARM: 6184/2: ux500: use neutral PRCMU base · d9e38040
      Linus Walleij authored 
      

The MTU wallclock timing fix-up patch was hardwired to the DB8500
causing a regression. This makes it work on the DB5500 as well.

Signed-off-by: default avatarLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      d9e38040
    • Will Deacon's avatar
      ARM: 6212/1: atomic ops: add memory constraints to inline asm · 398aa668
      Will Deacon authored 
      

Currently, the 32-bit and 64-bit atomic operations on ARM do not
include memory constraints in the inline assembly blocks. In the
case of barrier-less operations [for example, atomic_add], this
means that the compiler may constant fold values which have actually
been modified by a call to an atomic operation.

This issue can be observed in the atomic64_test routine in
<kernel root>/lib/atomic64_test.c:

00000000 <test_atomic64>:
   0:	e1a0c00d 	mov	ip, sp
   4:	e92dd830 	push	{r4, r5, fp, ip, lr, pc}
   8:	e24cb004 	sub	fp, ip, #4
   c:	e24dd008 	sub	sp, sp, #8
  10:	e24b3014 	sub	r3, fp, #20
  14:	e30d000d 	movw	r0, #53261	; 0xd00d
  18:	e3011337 	movw	r1, #4919	; 0x1337
  1c:	e34c0001 	movt	r0, #49153	; 0xc001
  20:	e34a1aa3 	movt	r1, #43683	; 0xaaa3
  24:	e16300f8 	strd	r0, [r3, #-8]!
  28:	e30c0afe 	movw	r0, #51966	; 0xcafe
  2c:	e30b1eef 	movw	r1, #48879	; 0xbeef
  30:	e34d0eaf 	movt	r0, #57007	; 0xdeaf
  34:	e34d1ead 	movt	r1, #57005	; 0xdead
  38:	e1b34f9f 	ldrexd	r4, [r3]
  3c:	e1a34f90 	strexd	r4, r0, [r3]
  40:	e3340000 	teq	r4, #0
  44:	1afffffb 	bne	38 <test_atomic64+0x38>
  48:	e59f0004 	ldr	r0, [pc, #4]	; 54 <test_atomic64+0x54>
  4c:	e3a0101e 	mov	r1, #30
  50:	ebfffffe 	bl	0 <__bug>
  54:	00000000 	.word	0x00000000

The atomic64_set (0x38-0x44) writes to the atomic64_t, but the
compiler doesn't see this, assumes the test condition is always
false and generates an unconditional branch to __bug. The rest of the
test is optimised away.

This patch adds suitable memory constraints to the atomic operations on ARM
to ensure that the compiler is informed of the correct data hazards. We have
to use the "Qo" constraints to avoid hitting the GCC anomaly described at
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44492 , where the compiler
makes assumptions about the writeback in the addressing mode used by the
inline assembly. These constraints forbid the use of auto{inc,dec} addressing
modes, so it doesn't matter if we don't use the operand exactly once.

Cc: stable@kernel.org
Reviewed-by: default avatarNicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      398aa668
    • Will Deacon's avatar
      ARM: 6211/1: atomic ops: fix register constraints for atomic64_add_unless · 068de8d1
      Will Deacon authored 
      

The atomic64_add_unless function compares an atomic variable with
a given value and, if they are not equal, adds another given value
to the atomic variable. The function returns zero if the addition
did not occur and non-zero otherwise.

On ARM, the return value is initialised to 1 in C code. Inline assembly
code then performs the atomic64_add_unless operation, setting the
return value to 0 iff the addition does not occur. This means that
when the addition *does* occur, the value of ret must be preserved
across the inline assembly and therefore requires a "+r" constraint
rather than the current one of "=&r".

Thanks to Nicolas Pitre for helping to spot this.

Cc: stable@kernel.org
Reviewed-by: default avatarNicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      068de8d1
    • Sascha Hauer's avatar
      ARM: 6210/1: Do not rely on reset defaults of L2X0_AUX_CTRL · 4082cfa7
      Sascha Hauer authored 
      

On i.MX35 the L2X0_AUX_CTRL register does not have sensible reset
default values. Allow them to be overwritten with the aux_val/aux_mask
arguments passed to l2x0_init().

Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Acked-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      4082cfa7
    • Takashi Iwai's avatar
      ALSA: hda - Restore cleared pin controls on resume · ac0547dc
      Takashi Iwai authored 
      

Many codecs now clear the pin controls at suspend via snd_hda_shutup_pins()
for reducing the click noise at power-off.  But this leaves some pins
uninitialized, and they'll be never recovered after resume.

This patch adds the proper recovery of cleared pin controls on resume.
Also it adds a check of bus->shutdown so that pins won't be cleared at
module unloading.

Reference: Kernel bug 16339
	http://bugzilla.kernel.org/show_bug.cgi?id=16339

Cc: <stable@kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      ac0547dc
    • Ben Hutchings's avatar
      IB/qib: Use request_firmware() to load SD7220 firmware · ecd4b48a
      Ben Hutchings authored 
      

Extract the microcode for the QLogic QLE7220 series IB HCA and use the
kernel microcode request facility to load the microcode.  This
supports Debian Linux's requirements to separate microcode which
doesn't have open source code available from the device driver.

Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      ecd4b48a