On dsi cmd mode we do not receive vblanks instead
we would get TE and these flags indicate TE is expected on
which port.

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312053841.2794-6-vandita.kulkarni@intel.com

If the GOP has programmed periodic command mode,
we need to disable that which would need a
deconfigure and configure sequence.

v2: Fix sparse error, pass only intel_dsi (Jani)
v3: Use intel_de_read

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312053841.2794-5-vandita.kulkarni@intel.com

Adding TE flags and periodic command mode flags
as part of private flags to indicate what TE interrupts
we would be getting instead of vblanks in case of mipi dsi
command mode.

v2: Add TE flag description (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312053841.2794-4-vandita.kulkarni@intel.com

Transcoder timing calculation differ for command mode.

v2: Use is_vid_mode, and use same I915_WRITE (Jani)
v3: Adjust the calculations to reflect dsc compression ratio
v4: Rearrange the vertical and horizontal timing calc, optimize
    local variables usage. (Jani)
v5: Fix the values used for calculation, use afe_clk for
    byte clock calculation, use intel_de_write/read (Jani)

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312053841.2794-3-vandita.kulkarni@intel.com

Configure the transcoder to operate in TE GATE command mode
and  take TE events from GPIO.
Also disable the periodic command mode, that GOP would have
programmed.

v2: Disable util pin (Jani)
v3: Use intel_de_write (Jani)

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312053841.2794-2-vandita.kulkarni@intel.com

It is strictly sufficient to only delay the intel_engine_pm_put from the
context barrier (and not from the context exit) in order to prevent the
gem_exec_nop contention. Adding the delay to the context exit incurs
noticably extra penalty for soft-rc6.

Fixes: edee52c9 ("drm/i915/gt: Delay release of engine-pm after last retirement")
Testcase: igt/i915_pm_rc6_residency/rc6-idle
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323192029.20723-1-chris@chris-wilson.co.uk

It looks like some callers expect a non-volatile object, that they do not
want the contents of the pages lost if they happen to not be looking at it.
The shrinker however sees that we mark the pages as DONTNEED and
believes that it can freely reap them. However, since the huge object
use plain pages, they cannot be swapped out as they have no backing
storge, and the only way we can shrink them is by discarding the
contents. In light of the callers wanting to keep the contents around,
both IS_SHRINKABLE and marking the pages as volatile are incorrect.

If we drop the IS_SHRINKABLE flag we avoid the immediate issue of the
shrinker accidentally removing valuable content. We will have to
remember that a huge object is not suitable for exercising the shrinker
interaction -- although we can introduce a shrinkable one if we require.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323130821.47914-1-matthew.auld@intel.com

Keep the engine-pm awake until the next jiffie, to avoid immediate
ping-pong under moderate load. (Forcing the idle barrier excerbates the
moderate load, dramatically increasing the driver overhead.) On the
other hand, delaying the idle-barrier slightly incurs longer rc6-off
and so more power consumption.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/848


Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323092841.22240-4-chris@chris-wilson.co.uk

In some cases we want to hold onto the wakeref for a little after the
last user so that we can avoid having to drop and then immediately
reacquire it. Allow the last user to specify if they would like to keep
the wakeref alive for a short hysteresis.

v2: Embrace bitfield.h for adjustable flags.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323103221.14444-1-chris@chris-wilson.co.uk

Stolen memory is allocated at creation, returning -ENOSPC if we run out
space.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1424


Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323110301.38806-1-matthew.auld@intel.com

Drop the pretense of kicking the tasklet (used only for the defunct guc
submission backend, it should just take ownership of the submit!) and so
remove the bh-kicking from around submission.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323092841.22240-5-chris@chris-wilson.co.uk

As we store the handle lookup inside a radix tree, we do not need the
gem_context->mutex except until we need to insert our lookup into the
common radix tree. This takes a small bit of rearranging to ensure that
the lut we insert into the tree is ready prior to actually inserting it
(as soon as it is exposed via the radixtree, it is visible to any other
submission).

v2: For brownie points, remove the goto spaghetti.
v3: Tighten up the closed-handle checks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323092841.22240-8-chris@chris-wilson.co.uk

Abuse^W Take advantage that we know we are inside the GT wakeref and
that prevents any client execbuf from reopening the i915_vma in order to
claim all the vma to close without having to drop the spinlock to free
each one individually. By keeping the spinlock, we do not have to
restart if we run concurrently with i915_gem_free_objects -- which
causes them both to restart continually and make very very slow
progress.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1361


Fixes: 77853186 ("drm/i915: Claim vma while under closed_lock in i915_vma_parked()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323092841.22240-2-chris@chris-wilson.co.uk

Since we take advantage of RCU for some i915_active objects, like the
intel_timeline_cacheline, we need to delay the i915_active_fini until
after the RCU grace period and we perform the kfree -- that is until
after all RCU protected readers.

<3> [108.204873] ODEBUG: assert_init not available (active state 0) object type: i915_active hint: __cacheline_active+0x0/0x80 [i915]
<4> [108.207377] WARNING: CPU: 3 PID: 2342 at lib/debugobjects.c:488 debug_print_object+0x67/0x90
<4> [108.207400] Modules linked in: vgem snd_hda_codec_hdmi x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul snd_hda_intel ghash_clmulni_intel snd_intel_dspcfg snd_hda_codec ax88179_178a snd_hwdep usbnet btusb snd_hda_core btrtl mii btbcm btintel snd_pcm bluetooth ecdh_generic ecc i915 i2c_hid pinctrl_sunrisepoint pinctrl_intel intel_lpss_pci prime_numbers
<4> [108.207587] CPU: 3 PID: 2342 Comm: gem_exec_parall Tainted: G     U            5.6.0-rc6-CI-Patchwork_17047+ #1
<4> [108.207609] Hardware name: Google Soraka/Soraka, BIOS MrChromebox-4.10 08/25/2019
<4> [108.207639] RIP: 0010:debug_print_object+0x67/0x90
<4> [108.207668] Code: 83 c2 01 8b 4b 14 4c 8b 45 00 89 15 87 d2 8a 02 8b 53 10 4c 89 e6 48 c7 c7 38 2b 32 82 48 8b 14 d5 80 2f 07 82 e8 49 d5 b7 ff <0f> 0b 5b 83 05 c3 f6 22 01 01 5d 41 5c c3 83 05 b8 f6 22 01 01 c3
<4> [108.207692] RSP: 0018:ffffc90000e7f890 EFLAGS: 00010282
<4> [108.207723] RAX: 0000000000000000 RBX: ffffc90000e7f8b0 RCX: 0000000000000001
<4> [108.207747] RDX: 0000000080000001 RSI: ffff88817ada8cb8 RDI: 00000000ffffffff
<4> [108.207770] RBP: ffffffffa0341cc0 R08: ffff88816b5a8948 R09: 0000000000000000
<4> [108.207792] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82322d54
<4> [108.207814] R13: ffffffffa0341cc0 R14: ffffffff83df9568 R15: ffff88816064f400
<4> [108.207839] FS:  00007f437d753700(0000) GS:ffff88817ad80000(0000) knlGS:0000000000000000
<4> [108.207863] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [108.207887] CR2: 00007f2ad1fb5000 CR3: 00000001725d8004 CR4: 00000000003606e0
<4> [108.207907] Call Trace:
<4> [108.207959]  debug_object_assert_init+0x15c/0x180
<4> [108.208475]  ? i915_active_acquire_if_busy+0x10/0x50 [i915]
<4> [108.208513]  ? rcu_read_lock_held+0x4d/0x60
<4> [108.208970]  i915_active_acquire_if_busy+0x10/0x50 [i915]
<4> [108.209380]  intel_timeline_read_hwsp+0x81/0x540 [i915]
<4> [108.210262]  __emit_semaphore_wait+0x45/0x1b0 [i915]
<4> [108.210726]  ? i915_request_await_dma_fence+0x143/0x560 [i915]
<4> [108.211156]  i915_request_await_dma_fence+0x28a/0x560 [i915]
<4> [108.211633]  i915_request_await_object+0x24a/0x3f0 [i915]
<4> [108.212102]  eb_submit.isra.47+0x58f/0x920 [i915]
<4> [108.212622]  i915_gem_do_execbuffer+0x1706/0x2c70 [i915]
<4> [108.213071]  ? i915_gem_execbuffer2_ioctl+0xc0/0x470 [i915]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323092841.22240-1-chris@chris-wilson.co.uk

Few edp panels like Sharp is triggering short and long
hpd pulse after panel is getting powered off.
Currently driver is already ignoring long pulse for eDP
panel but in order to process the short pulse, it turns on
the VDD which requires panel power_cycle_delay + panel_power_on_delay
these delay on Sharp panel introduced the responsiveness overhead
of 800ms in the modeset sequence and as well is in suspend
sequence.
Ignoring any short pulse if panel is powered off.

FIXME: It requires to wait for panel_power_off delay in order
to check the panel power status due to pps_lock because panel triggers
short pulse immediately after writing PP_OFF to PP_CTRL register and
wait_panel_off waits for panel_power_off delay with pps_lock held.
This still creates responsiveness overhead of panel_power_off delay.

v2:
- checking vdd along with panel power to ignore the hpd. [Jani,Ville]
v3:
- safer side check to ignore the long hpd when eDP have power,
  adding type of hpd to debug log. [Jani]

Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200318081837.23983-1-anshuman.gupta@intel.com

Don't override our previous frequency we used after parking, and avoid
continually spiking back to the efficient frequency for mostly idle
workloads. Trust our ability to autotune across a workload switch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200322163225.28791-2-chris@chris-wilson.co.uk

If we park/unpark faster than we can respond to RPS events, we never
will process a downclock event after expiring a waitboost, and thus we
will forever restart the GPU at max clocks even if the workload switches
and doesn't justify full power.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1500


Fixes: 3e7abf81 ("drm/i915: Extract GT render power state management")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200322163225.28791-1-chris@chris-wilson.co.uk
Cc: <stable@vger.kernel.org> # v5.5+

A silly cut'n'paste copied the unlocked error path and used it inside
the pin_mutex lock, we need to drop that lock before returning.

Fixes: b412c63f ("drm/i915/gt: Report context-is-closed prior to pinning")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200322123241.17694-1-chris@chris-wilson.co.uk

Our assertion caught that we do try to pin a closed context if userspace
is viciously racing context-closure with execbuf, so make it fail
gracefully.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1492


Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200320130159.3922-1-chris@chris-wilson.co.uk

We only consider crtc_state->enable when initially calculating plane
visibility. Later on we try to override the plane's state to invisible
if the crtc is in DPMS off state (crtc_state->active==false).
Unfortunately the code doing that only updates the plane_state.visible
flag and the crtc_state.active_planes bimask, but forgets to update
some of the other plane bitmasks stored in the crtc_state. Namely
crtc_state.nv12_planes is left set up based on the original visibility
check which makes icl_check_nv12_planes() pick a slave plane for the
flagged plane in the bitmask. Later on we hit the watermark code
which sees a plane with a slave assigned and it then makes the
logical assumption that the master plane must itself be visible.
Since the master's plane_state.visible flag was already cleared
we get a WARN.

Fix the problem by clearing all the plane bitmasks for DPMS off.
This is more or less the wrong approach and instead we should
calculate all the plane related state purely based crtc_state->enable
(to guarantee that the subsequent DPMS on can't fail). However in
the past we definitely had some roadblocks to making that happen.
Not sure how many are left these days, but let's stick to the current
approach since it's a much simpler fix to the immediate problem
(the WARN).

v2: Keep the visible=false, it's important (Rodrigo)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200318174515.31637-1-ville.syrjala@linux.intel.com


Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

It adds routines that write DP VSC SDP and DP HDR Metadata Infoframe SDP.
In order to pack DP VSC SDP, it adds intel_dp_vsc_sdp_pack() function.
It follows DP 1.4a spec. [Table 2-116: VSC SDP Header Bytes] and
[Table 2-117: VSC SDP Payload for DB16 through DB18]

In order to pack DP HDR Metadata Infoframe SDP, it adds
intel_dp_hdr_metadata_infoframe_sdp_pack() function.
And it follows DP 1.4a spec.
([Table 2-125: INFOFRAME SDP v1.2 Header Bytes] and
[Table 2-126: INFOFRAME SDP v1.2 Payload Data Bytes - DB0 through DB31])
and CTA-861-G spec. [Table-42 Dynamic Range and Mastering InfoFrame].

A mechanism and a naming rule of intel_dp_set_infoframes() function
references intel_encoder->set_infoframes() of intel_hdmi.c .
VSC SDP is used for PSR and Pixel Encoding and Colorimetry Formats cases.
Because PSR routine has its own routine of writing a VSC SDP, when the PSR
is enabled, intel_dp_set_infoframes() does not write a VSC SDP.

v3:
  - Explicitly disable unused DIPs (AVI, GCP, VS, SPD, DRM. They will be
    used for HDMI), when intel_dp_set_infoframes() function will be called.
  - Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp.
v4: Use struct drm_device logging macros
v5:
  - use intel_de_*() functions for register access
  - Addressed review comments from Uma
    Polish commit message and comments
    Add 6bpc to packing of VSC SDP

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211074657.231405-5-gwan-gyeong.mun@intel.com

It stores computed dp hdr metadata infoframe sdp to infoframes.drm of
crtc state. It referenced intel_hdmi_compute_drm_infoframe().

While computing, we'll also fill out the infoframes.enable bitmask
appropriately.

v2: Wrap a long line.
v4: Use struct drm_device logging macros
v5: Fix typo [Uma]

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211074657.231405-4-gwan-gyeong.mun@intel.com

In order to support state readout for DP VSC SDP, we need to have a
structure which holds DP VSC SDP payload data such as
"union hdmi_infoframe drm" which is used for DRM infoframe.
It adds a struct drm_dp_vsc_sdp vsc to intel_crtc_state.infoframes.

And it stores computed dp vsc sdp to infoframes.vsc of crtc state.
While computing we'll also fill out the inforames.enable bitmask
appropriately.

The compute routine follows DP 1.4 spec [Table 2-117: VSC SDP Payload for
DB16 through DB18].

v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v5:
  - Rebased
  - Add warning where a bpc is 6 and a pixel format is RGB.
v7: Fix the wrong check of combination bpc 6 and RGB pixelformat

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211074657.231405-3-gwan-gyeong.mun@intel.com

It adds new enumeration definitions for VSC SDP Payload for Pixel
Encoding/Colorimetry Format.
And it adds a new drm data structure for DP VSC SDP.

enum dp_colorspace and enum dp_colorimetry correspond "Pixel Encoding and
Colorimetry Formats". enum dp_dynamic_range corresponds "Dynamic Range".
And enum dp_content_type corresponds "Content Type"
All of them are based on DP 1.4 spec [Table 2-117: VSC SDP Payload for
DB16 through DB18].

v3: Add a new drm data structure for DP VSC SDP
v5: Addressed review comments from Uma
    - Add kernel docs for added data structures
    - Rename enum dp_colorspace to dp_pixelformat
    - Polish commit message
    - Fix typos
    - Drop self-explanatory comments

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211074657.231405-2-gwan-gyeong.mun@intel.com

Use the restored ability to check if a context is closed to decide
whether or not to immediately ban the context from further execution
after a hang.

Fixes: be90e344 ("drm/i915/gt: Cancel banned contexts after GT reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319170707.8262-2-chris@chris-wilson.co.uk

I need to keep the GEM context around a bit longer so adding an explicit
flag for syncing execbuf with closed/abandonded contexts.

v2:
 * Use already available context flags. (Chris)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319170707.8262-1-chris@chris-wilson.co.uk

%pS includes the offset, which is useful for return addresses but noise
when we are pretty printing a known (and expected) function entry point.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319091943.7815-1-chris@chris-wilson.co.uk

Replace the use of printk based drm logging macros with the struct
drm_device based logging macros.

Note that this converts DRM_DEBUG_DRIVER() to drm_dbg().

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html


Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314183344.17603-8-wambui.karugax@gmail.com

Replace the use of the printk based drm logging macros with the struct
drm_device based logging macros in i915/gt/intel_rps.c. This also
involves extracting the drm_i915_private device pointer from various
intel types.

This converts the instances of DRM_DEBUG_DRIVER to drm_dbg() while not
converting DRM_DEBUG() instances due to the lack of an analogous
drm_device based macro.

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html


Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314183344.17603-7-wambui.karugax@gmail.com

Replace the use of printk based drm logging macros to the struct
drm_device based logging macros in i915/gt/intel_ring_submission.c.
This was done using the following semantic patch that transforms based
on the existence of a drm_i915_private device:
@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

New checkpatch warnings were fixed manually.

Note that this converts DRM_DEBUG_DRIVER to drm_dbg().

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html


Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314183344.17603-6-wambui.karugax@gmail.com

Replace the use of the printk based drm logging macros with the struct
drm_device based logging macros.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314183344.17603-5-wambui.karugax@gmail.com

Converts various instances of the printk based drm logging macros to use
the struct drm_device logging macros. This also involves extracting the
drm_i915_private device from intel types in some cases.

Note that this converts DRM_DEBUG_DRIVER() to drm_dbg().

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html


Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314183344.17603-4-wambui.karugax@gmail.com

Convert various instances of the printk based drm logging macros to the
struct drm_device based logging macros.

Note that this converts DRM_DEBUG_DRIVER() to drm_dbg() but does not
convert DRM_DEBUG() due to the lack of an analogous drm_device based
macro.

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html


Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314183344.17603-3-wambui.karugax@gmail.com

Converts various instances of the printk based drm logging macros to use
the struct drm_device based logging macros in i915/gt/intel_ggtt.c.
This change was done using the following coccinelle script that matches
based on the existence of a drm_i915_private device:
@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

New checkpatch warnings were fixed manually.

Note that this converts DRM_DEBUG_DRIVER to drm_dbg()

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html


Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314183344.17603-2-wambui.karugax@gmail.com

Adding 4 new PCI IDs to TGL
Bspec: 44455

Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200318221240.8180-1-swathi.dhanavanthri@intel.com


Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

This fixes a problem found on the MacBookPro 2017 Retina panel.

The panel reports 10 bpc color depth in its EDID, and the
firmware chooses link settings at boot which support enough
bandwidth for 10 bpc (324000 kbit/sec = multiplier 0xc),
but the DP_MAX_LINK_RATE dpcd register only reports
2.7 Gbps (multiplier value 0xa) as possible, in direct
contradiction of what the firmware successfully set up.

This restricts the panel to 8 bpc, not providing the full
color depth of the panel.

This patch adds a quirk specific to the MBP 2017 15" Retina
panel to add the additiional 324000 kbps link rate during
edp setup.

Link to previous discussion of a different attempted fix
with Ville and Jani:

https://patchwork.kernel.org/patch/11325935/



v2: Follow Jani's proposal of defining quirk_rates[] instead
    of just appending 324000. This for better clarity.

v3: Rebased onto current drm-tip, as of 16-March-2020. Adapt
    to new edid_quirks parameter of drm_dp_has_quirk().

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316042340.4783-1-mario.kleiner.de@gmail.com

Converts various instances of the printk based drm logging macros to the
struct drm_device based logging macros in i915/display/intel_hdcp.c.
This also involves extracting the drm_i915_private device from the
intel_connector type for use in the macros.

v2 by Jani:
- rebase

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/47d5e88dedc08ee48938344296ada550dedd5f90.1583766715.git.jani.nikula@intel.com

Convert various instances of printk based drm logging macros to the
struct drm_device based logging macros in i915/display/intel_fbdev.c.
This also involves extracting the drm_i915_private device from various
intel types.

v2 by Jani:
- fix the final one too

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7081a49d20cc46b1b1144c83a4e21294d121d8a7.1583766715.git.jani.nikula@intel.com

This replaces the uses of the printk based drm logging macros with the
struct drm_device based logging macros in i915/display/intel_fbc.c.
This transformation was done using the following coccinelle semantic
patch that matches based on the existence of a drm_i915_private device
pointer:
@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

New checkpatch warnings were addressed manually.

v2 by Jani:
- also convert pr_info_once to drm based logging

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/32a92f1d4e4d01131605b17bec831517e39c5902.1583766715.git.jani.nikula@intel.com

For icl+, have hw read out to create hw blob of gamma
lut values. icl+ platforms supports multi segmented gamma
mode by default, add hw lut creation for this mode.

This will be used to validate gamma programming using dsb
(display state buffer) which is a tgl specific feature.

v2: -readout code for multisegmented gamma has to come
     up with some intermediate entries that aren't preserved
     in hardware (Jani N)
    -linear interpolation (Ville)
    -moved common code to check gamma_enable to specific funcs,
     since icl doesn't support that
v3: -use u16 instead of __u16 [Jani N]
    -used single lut [Jani N]
    -improved and more readable for loops [Jani N]
    -read values directly to actual locations and then fill gaps [Jani N]
    -moved cleaning to patch 1 [Jani N]
    -renamed icl_read_lut_multi_seg() to icl_read_lut_multi_segment to
     make it similar to icl_load_luts()
    -renamed icl_compute_interpolated_gamma_blob() to
     icl_compute_interpolated_gamma_lut_values() more sensible, I guess
v4: -removed interpolated func for creating gamma lut values
    -removed readouts of fine and coarse segments, failure to read PAL_PREC_DATA
     correctly
v5: -added gamma_enable check inside read_luts()
v6: -renamed intel_color_lut_entry_equal() to intel_color_lut_entries_equal() [Ville]
    -changed if-else to switch [Ville]
    -removed intel_color_lut_entry_multi_equal() [Ville]
v7: -checkpatch warnings
v8: -rebased
v9: -rebased, aligned with Ville's style of gamma cleanup

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200317135736.14305-1-swati2.sharma@intel.com