A follow-up change will start to disconnect/re-connect PHYs around AUX
transfers and modeset enable/disables. To prepare for that add a new
TypeC PHY disconnected mode, to help tracking the TC-cold blocking power
domain status (no power domain in disconnected state, mode dependent
power domain in connected state).

v2: Move the !disconnected mode and phy-owned asserts in
    __intel_tc_port_lock() later in the patchset, when the asserts will
    hold. (Jose)

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929132833.2253961-3-imre.deak@intel.com

A follow-up patch will disconnect/reconnect PHYs around AUX transfers
and modeset enable/disables. To prepare for that and make things
consistent for all TypeC modes stop connecting the PHY in legacy mode
without a sink being connected. This was done before since in legacy
mode the PHY is dedicated to display usage, so there was no point in
disconnecting it. However after the follow-up changes the TC-cold
blocking power domains will be held as long as the PHY is in the
connected state, so we'll need to disconnect/re-connect the PHY in all
TypeC modes to allow for power saving.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921002313.1132357-7-imre.deak@intel.com

Instead of directly accessing the TypeC port internal struct members,
add/use helpers to retrieve the corresponding properties.

No functional change.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921002313.1132357-6-imre.deak@intel.com

On ADL-P the PHY ready/complete flag is always set even in TBT-alt mode.
To avoid taking the PHY ownership and the following spurious "PHY sudden
disconnect" messages on this platform when connecting the PHY in TBT
mode, check if there is any DP-alt or legacy sink connected before
taking the ownership.

v2: (Jose)
- Fix debug message clarifying that a TBT sink can be connected.
- Add comments describing the PHY complete HW flag semantic differences
  between adl-p and other platforms.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929132833.2253961-2-imre.deak@intel.com

Waiting for the PHY complete flag to clear when releasing the PHY
ownership was add in

commit ddec3627

 ("drm/i915: Wait for TypeC PHY complete flag to clear in safe mode")

This isn't required by the spec, the vague idea was to make the
handshake with the firmware more robust, without actual evidence for
when it would be needed. Checking this again, the flag doesn't clear on
ICL until after the PHY's PLL is disabled and the flag is permanently
set on ADL-P. To avoid the spurious timeout messages in dmesg, just
remove this wait.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921002313.1132357-4-imre.deak@intel.com

On ADL-P the PHY ready (aka status complete on other platforms) flag is
always set, besides when a DP-alt, legacy sink is connected also when a
TBT sink is connected or nothing is connected. So assume the PHY to be
connected when both the TBT live status and PHY ready flags are set.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921002313.1132357-3-imre.deak@intel.com

Atm during driver loading and system resume TypeC ports are accessed
before their HW/SW state is synced. Move the TypeC port sanitization to
the encoder's sync_state hook to fix this.

v2: Handle the encoder disabled case in gen11_dsi_sync_state() as well
    (Jose, Jani)

Fixes: f9e76a6e

 ("drm/i915: Add an encoder hook to sanitize its state during init/resume")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929132833.2253961-1-imre.deak@intel.com

Display underrun in HDR mode when cursor is enabled.
RTL fix will be implemented CLKGATE_DIS_PSL_A bit 28-46520h.
As per W/A 1604331009, Disable cursor clock gating in HDR mode.

Bspec : 33451

Changes since V6:
        - Address checkpatch warnings
        - Bit ordering
Changes since V5:
        - replace intel_de_read with intel_de_rmw - Jani
Changes since V4:
        - Added WA needed check - Ville
        - Replace BIT with REG_BIT - Ville
        - Add WA enable/disable support back which was
          added in V1 - Ville
Changes since V3:
        - Disable WA when not in HDR mode or cursor plane
          not active - Ville
        - Extract required args from crtc_state - Ville
        - Create HDR mode API using bdw_set_pipemisc ref - Ville
        - Tested with HDR video as well full setmode, WA
          applies and disables
Changes since V2:
        - Made it general gen11 WA
        - Removed WA needed check
        - Added cursor plane active check
        - Once WA enable, software will not disable
Changes since V1:
        - Modified way CLKGATE_DIS_PSL bit 28 was modified

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929052442.2543054-1-tejaskumarx.surendrakumar.upadhyay@intel.com

Use a nop table for the cases where CxSR doesn't init properly.

v2: use a nop table (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bb0658d14afd02cca692cd58223800f68f4ff4ce.1632869550.git.jani.nikula@intel.com

I used a macro to avoid making any really silly mistakes here.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7c97f7e5ab0eae3c4cd7ce8344254356c34f3ad6.1632869550.git.jani.nikula@intel.com

Make nice clear tables instead of having things in two places.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d0f7e2c792dc40804555d26b6ede62f4bd2f23d6.1632869550.git.jani.nikula@intel.com

There was some excess comments and an unused vtbl ptr.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/573a9366d33e2b7bd7b8215af614f03f3e562926.1632869550.git.jani.nikula@intel.com

This is a bit of a twisty one since each platform is slightly
different, so might take some more review care.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/75e0139b28cca9ceff77de72c3ef737c101255ba.1632869550.git.jani.nikula@intel.com

Most the dpll vtable into read-only memory.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0414a27317de3f335a8453a29486b746aa6862e7.1632869550.git.jani.nikula@intel.com

Move the functions into read-only tables.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5a481307a5daab40a506c3b9a64b0b37e01a1a41.1632869550.git.jani.nikula@intel.com

This clarifies quite well what functions get used on what platforms
instead of having to decipher the old tree.

v2: fixed IVB mistake (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/49e46e61206d4fdcf08fb5dc1978da3fce702134.1632869550.git.jani.nikula@intel.com

Use a macro to avoid mistakes, this type of macro is only used
in a couple of places.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/af229c1e8ec894f177b344ab77b90e32c33428de.1632869550.git.jani.nikula@intel.com

Put the vtable into ro memory.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ec4687956f9b98024fea55b2f0ed1e192e244ff1.1632869550.git.jani.nikula@intel.com

this single function might be possible to merge later, but
for now it's simple to just split it out.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba570aa10b694b2e8640e0c58430fd0053c306b7.1632869550.git.jani.nikula@intel.com

It may make sense to merge this with display again later,
however the fdi use of the vtable is limited to only a
few generations.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7af7359b6cec33bd2d32152893d9a1e8f8cf7f21.1632869550.git.jani.nikula@intel.com

This provide a service from irq to display, so make it separate

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/05f533064709764dff8bcfef6a58f9a8482dc5bb.1632869550.git.jani.nikula@intel.com

This moves all the cdclk related functions into their own vtable.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/591b7b6a79c4ab644a161ae00b7d630b3ef16434.1632869550.git.jani.nikula@intel.com

These are only used internally in the audio code

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d12257cc7685a9b52618f7da444ba1fc8848b4db.1632869550.git.jani.nikula@intel.com

These are only used internally in the color module

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/084a31362f1621d2f556069bb2bc47d362a63823.1632869550.git.jani.nikula@intel.com

These are the watermark api between display and pm.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7130356324ef3de59b4e913f025d7dce822157ee.1632869550.git.jani.nikula@intel.com

This function is only used inside intel_pm.c

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/95d626a7329ab5779804762894e304e12c6dbe1f.1632869550.git.jani.nikula@intel.com

This wraps the fdi link training vfunc to make it clearer.

Suggested by Jani.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1bb978bcb6f16fbdaf08f2800a179b774525b59e.1632869550.git.jani.nikula@intel.com

This adds wrappers around all the vtable callers so they are in
one place.

Suggested by Jani.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c3dd7aaad039e76acde9dda7211468907aa657c0.1632869550.git.jani.nikula@intel.com

This moves one wrapper from the pm->display side, and creates
wrappers for all the others, this should simplify things later.

One thing to note is that the code checks the existence of some
of these ptrs, so the wrappers are a bit complicated by that.

Suggested by Jani.

v2: fixup warnings in wrong place error.

v3 by Jani: fix intel_compute_global_watermarks() return value check

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee2760c45896568c9dd9114a575509619bd44ef2.1632869550.git.jani.nikula@intel.com

The crtc was never being used here.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/70438bface47fa683cda8a9e95d0556fca448172.1632869550.git.jani.nikula@intel.com

The i845_update_wm code was always calling the i845 variant,
and the i9xx_update_wm had only a choice between i830 and i9xx
paths, hardly worth the vfunc overhead.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/07523b1e46cd10adb2991ed4d2619b542a48c1ce.1632869550.git.jani.nikula@intel.com

constify it while here. drop the put function since it was never
overloaded and always has done the same thing, no point in
indirecting it for show.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/41c3e1896162fc08e22e40b00642791365a8c00e.1632869550.git.jani.nikula@intel.com

The right parameter that selects second dsc engine is dsc_split.
Hence use dsc_split instead of slice_count while selecting the
cdclk in order to accommodate 1ppc limitaion of vdsc.

Fixes: fe01883f

 ("drm/i915: Get proper min cdclk if vDSC enabled")
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210915054338.29869-1-vandita.kulkarni@intel.com

Commit 989634fb ("drm/i915/audio: set HDA link parameters in
driver") makes HDMI audio on Lenovo P350 disappear.

So in addition to TGL, extend the logic to RKL to use BIOS provided
value to fix the regression.

Fixes: 989634fb

 ("drm/i915/audio: set HDA link parameters in driver")
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906041300.508458-1-kai.heng.feng@canonical.com

On FBC1 we can specify an arbitrary cfb stride. The hw will
simply throw away any compressed line that would exceed the
specified limit and keep using the uncompressed data instead.
Thus we can allow arbitrary compression limits.

The one thing we have to keep in mind though is that the cfb
stride is specified in units of 32B (gen2) or 64B (gen3+).
Fortunately X-tile is already 128B (gen2) or 512B (gen3+) wide
so as long as we limit outselves to the same 4x compression
limit that FBC2 has we are guaranteed to have a sufficiently
aligned cfb stride.

Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921152517.803-5-ville.syrjala@linux.intel.com

There's some kind of weird corner cases in FBC which requires
FBC segments to be separated by at least one extra cacheline.
Make sure that is present.

v2: Respin to fit in with skl_fbc_min_cfb_stride()
v3: Make it build

Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921181245.15091-1-ville.syrjala@linux.intel.com

Apply the same 512 byte FBC segment alignment to glk+ as we use
on skl+. The only real difference is that we now have a dedicated
register for the FBC override stride. Not 100% sure which
platforms really need the 512B alignment, but it's easiest
to just do it on everything.

Also the hardware no longer seems to misclaculate the CFB stride
for linear, so we can omit the use of the override stride for
linear unless the stride is misaligned.

Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921152517.803-3-ville.syrjala@linux.intel.com

The code to calculate the cfb stride/size is a bit of mess.
The cfb size is getting calculated based purely on the plane
stride and plane height. That doesn't account for extra
alignment we want for the cfb stride. The gen9 override
stride OTOH is just calculated based on the plane width, and
it does try to make things more aligned but any extra alignment
added there is not considered in the cfb size calculations.
So not at all convinced this is working as intended. Additionally
the compression limit handling is split between the cfb allocation
code and g4x_dpfc_ctl_limit() (for the 16bpp case), which is just
confusing.

Let's streamline the whole thing:
- Start with the plane stride, convert that into cfb stride (cfb is
  always 4 bytes per pixel). All the calculations will assume 1:1
  compression limit since that will give us the max values, and we
  don't yet know how much stolen memory we will be able to allocate
- Align the cfb stride to 512 bytes on modern platforms. This guarantees
  the 4 line segment will be 512 byte aligned regardles of the final
  compression limit we choose later. The 512 byte alignment for the
  segment is required by at least some of the platforms, and just doing
  it always seems like the easiest option
- Figure out if we need to use the override stride or not. For X-tiled
  it's never needed since the plane stride is already 512 byte aligned,
  for Y-tiled it will be needed if the plane stride is not a multiple
  of 512 bytes, and for linear it's apparently always needed because the
  hardware miscalculates the cfb stride as PLANE_STRIDE*512 instead of
  the PLANE_STRIDE*64 that it use with linear.
- The cfb size will be calculated based on the aligned cfb stride to
  guarantee we actually reserved enough stolen memory and the FBC hw
  won't end up scribbling over whatever else is allocated in stolen
- The compression limit handling we just do fully in the cfb allocation
  code to make things less confusing

v2: Write the min cfb segment stride calculation in a more
    explicit way to make it clear what is going on
v3: Remeber to update fbc->limit when changing to 16bpp

Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v2
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923042151.19052-1-ville.syrjala@linux.intel.com

If HPLL watermarks are already enabled, let's not mark them as
disabled by forgetting to bump 'level' before we call
g4x_raw_plane_wm_set().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514125751.17075-6-ville.syrjala@linux.intel.com


Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

PSR always had a requirement to only be enabled if there is active
planes but not following that never caused any issues.
But that changes in Alderlake-P, leaving PSR enabled without
active planes causes transcoder/port underruns.

Similar behavior was fixed during the pipe disable sequence by
commit 84030adb

 ("drm/i915/display: Disable audio, DRRS and PSR before planes").

intel_dp_compute_psr_vsc_sdp() had to move from
intel_psr_enable_locked() to intel_psr_compute_config() because we
need to be able to disable/enable PSR from atomic states without
connector and encoder state.

Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922215242.66683-3-jose.souza@intel.com