Pull UDF fixes and quota cleanups from Jan Kara:
 "Several UDF fixes and some minor quota cleanups"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Check output buffer length when converting name to CS0
  udf: Prevent buffer overrun with multi-byte characters
  quota: constify qtree_fmt_operations structures
  udf: avoid uninitialized variable use
  udf: Fix lost indirect extent block
  udf: Factor out code for creating indirect extent
  udf: limit the maximum number of indirect extents in a row
  udf: limit the maximum number of TD redirections
  fs: make quota/dquot.c explicitly non-modular
  fs: make quota/netlink.c explicitly non-modular

Merge first patch-bomb from Andrew Morton:

 - A few hotfixes which missed 4.4 becasue I was asleep.  cc'ed to
   -stable

 - A few misc fixes

 - OCFS2 updates

 - Part of MM.  Including pretty large changes to page-flags handling
   and to thp management which have been buffered up for 2-3 cycles now.

  I have a lot of MM material this time.

[ It turns out the THP part wasn't quite ready, so that got dropped from
  this series  - Linus ]

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (117 commits)
  zsmalloc: reorganize struct size_class to pack 4 bytes hole
  mm/zbud.c: use list_last_entry() instead of list_tail_entry()
  zram/zcomp: do not zero out zcomp private pages
  zram: pass gfp from zcomp frontend to backend
  zram: try vmalloc() after kmalloc()
  zram/zcomp: use GFP_NOIO to allocate streams
  mm: add tracepoint for scanning pages
  drivers/base/memory.c: fix kernel warning during memory hotplug on ppc64
  mm/page_isolation: use macro to judge the alignment
  mm: fix noisy sparse warning in LIBCFS_ALLOC_PRE()
  mm: rework virtual memory accounting
  include/linux/memblock.h: fix ordering of 'flags' argument in comments
  mm: move lru_to_page to mm_inline.h
  Documentation/filesystems: describe the shared memory usage/accounting
  memory-hotplug: don't BUG() in register_memory_resource()
  hugetlb: make mm and fs code explicitly non-modular
  mm/swapfile.c: use list_for_each_entry_safe in free_swap_count_continuations
  mm: /proc/pid/clear_refs: no need to clear VM_SOFTDIRTY in clear_soft_dirty_pmd()
  mm: make sure isolate_lru_page() is never called for tail page
  vmstat: make vmstat_updater deferrable again and shut down on idle
  ...

Reoder the pages_per_zspage field in struct size_class which can
eliminate the 4 bytes hole between it and stats field.

Signed-off-by: Weijie Yang <weijie.yang@samsung.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

list_last_entry*( has been defined in list.h, so replace
list_tail_entry() with it.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Cc: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Do not __GFP_ZERO allocated zcomp ->private pages.  We keep allocated
streams around and use them for read/write requests, so we supply a
zeroed out ->private to compression algorithm as a scratch buffer only
once -- the first time we use that stream.  For the rest of IO requests
served by this stream ->private usually contains some temporarily data
from the previous requests.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Each zcomp backend uses own gfp flag but it's pointless because the
context they could be called is driven by upper layer(ie, zcomp
frontend).  As well, zcomp frondend could call them in different
context.  One context(ie, zram init part) is it should be better to make
sure successful allocation other context(ie, further stream allocation
part for accelarating I/O speed) is just optional so let's pass gfp down
from driver (ie, zcomp frontend) like normal MM convention.

[sergey.senozhatsky@gmail.com: add missing __vmalloc zero and highmem gfps]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When we're using LZ4 multi compression streams for zram swap, we found
out page allocation failure message in system running test.  That was
not only once, but a few(2 - 5 times per test).  Also, some failure
cases were continually occurring to try allocation order 3.

In order to make parallel compression private data, we should call
kzalloc() with order 2/3 in runtime(lzo/lz4).  But if there is no order
2/3 size memory to allocate in that time, page allocation fails.  This
patch makes to use vmalloc() as fallback of kmalloc(), this prevents
page alloc failure warning.

After using this, we never found warning message in running test, also
It could reduce process startup latency about 60-120ms in each case.

For reference a call trace :

    Binder_1: page allocation failure: order:3, mode:0x10c0d0
    CPU: 0 PID: 424 Comm: Binder_1 Tainted: GW 3.10.49-perf-g991d02b-dirty #20
    Call trace:
      dump_backtrace+0x0/0x270
      show_stack+0x10/0x1c
      dump_stack+0x1c/0x28
      warn_alloc_failed+0xfc/0x11c
      __alloc_pages_nodemask+0x724/0x7f0
      __get_free_pages+0x14/0x5c
      kmalloc_order_trace+0x38/0xd8
      zcomp_lz4_create+0x2c/0x38
      zcomp_strm_alloc+0x34/0x78
      zcomp_strm_multi_find+0x124/0x1ec
      zcomp_strm_find+0xc/0x18
      zram_bvec_rw+0x2fc/0x780
      zram_make_request+0x25c/0x2d4
      generic_make_request+0x80/0xbc
      submit_bio+0xa4/0x15c
      __swap_writepage+0x218/0x230
      swap_writepage+0x3c/0x4c
      shrink_page_list+0x51c/0x8d0
      shrink_inactive_list+0x3f8/0x60c
      shrink_lruvec+0x33c/0x4cc
      shrink_zone+0x3c/0x100
      try_to_free_pages+0x2b8/0x54c
      __alloc_pages_nodemask+0x514/0x7f0
      __get_free_pages+0x14/0x5c
      proc_info_read+0x50/0xe4
      vfs_read+0xa0/0x12c
      SyS_read+0x44/0x74
    DMA: 3397*4kB (MC) 26*8kB (RC) 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB
         0*512kB 0*1024kB 0*2048kB 0*4096kB = 13796kB

[minchan@kernel.org: change vmalloc gfp and adding comment about gfp]
[sergey.senozhatsky@gmail.com: tweak comments and styles]
Signed-off-by: Kyeongdon Kim <kyeongdon.kim@lge.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We can end up allocating a new compression stream with GFP_KERNEL from
within the IO path, which may result is nested (recursive) IO
operations.  That can introduce problems if the IO path in question is a
reclaimer, holding some locks that will deadlock nested IOs.

Allocate streams and working memory using GFP_NOIO flag, forbidding
recursive IO and FS operations.

An example:

  inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage.
  git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes:
   (jbd2_handle){+.+.?.}, at:  start_this_handle+0x4ca/0x555
  {IN-RECLAIM_FS-W} state was registered at:
     __lock_acquire+0x8da/0x117b
     lock_acquire+0x10c/0x1a7
     start_this_handle+0x52d/0x555
     jbd2__journal_start+0xb4/0x237
     __ext4_journal_start_sb+0x108/0x17e
     ext4_dirty_inode+0x32/0x61
     __mark_inode_dirty+0x16b/0x60c
     iput+0x11e/0x274
     __dentry_kill+0x148/0x1b8
     shrink_dentry_list+0x274/0x44a
     prune_dcache_sb+0x4a/0x55
     super_cache_scan+0xfc/0x176
     shrink_slab.part.14.constprop.25+0x2a2/0x4d3
     shrink_zone+0x74/0x140
     kswapd+0x6b7/0x930
     kthread+0x107/0x10f
     ret_from_fork+0x3f/0x70
  irq event stamp: 138297
  hardirqs last  enabled at (138297):  debug_check_no_locks_freed+0x113/0x12f
  hardirqs last disabled at (138296):  debug_check_no_locks_freed+0x33/0x12f
  softirqs last  enabled at (137818):  __do_softirq+0x2d3/0x3e9
  softirqs last disabled at (137813):  irq_exit+0x41/0x95

               other info that might help us debug this:
   Possible unsafe locking scenario:
         CPU0
         ----
    lock(jbd2_handle);
    <Interrupt>
      lock(jbd2_handle);

                *** DEADLOCK ***
  5 locks held by git/20158:
   #0:  (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b
   #1:  (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3
   #2:  (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b
   #3:  (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b
   #4:  (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555

               stack backtrace:
  CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty #211
  Call Trace:
    dump_stack+0x4c/0x6e
    mark_lock+0x384/0x56d
    mark_held_locks+0x5f/0x76
    lockdep_trace_alloc+0xb2/0xb5
    kmem_cache_alloc_trace+0x32/0x1e2
    zcomp_strm_alloc+0x25/0x73 [zram]
    zcomp_strm_multi_find+0xe7/0x173 [zram]
    zcomp_strm_find+0xc/0xe [zram]
    zram_bvec_rw+0x2ca/0x7e0 [zram]
    zram_make_request+0x1fa/0x301 [zram]
    generic_make_request+0x9c/0xdb
    submit_bio+0xf7/0x120
    ext4_io_submit+0x2e/0x43
    ext4_bio_write_page+0x1b7/0x300
    mpage_submit_page+0x60/0x77
    mpage_map_and_submit_buffers+0x10f/0x21d
    ext4_writepages+0xc8c/0xe1b
    do_writepages+0x23/0x2c
    __filemap_fdatawrite_range+0x84/0x8b
    filemap_flush+0x1c/0x1e
    ext4_alloc_da_blocks+0xb8/0x117
    ext4_rename+0x132/0x6dc
    ? mark_held_locks+0x5f/0x76
    ext4_rename2+0x29/0x2b
    vfs_rename+0x540/0x636
    SyS_renameat2+0x359/0x44d
    SyS_rename+0x1e/0x20
    entry_SYSCALL_64_fastpath+0x12/0x6f

[minchan@kernel.org: add stable mark]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Kyeongdon Kim <kyeongdon.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  floppy: make local variable non-static
  exynos: fixes an incorrect header guard
  dt-bindings: fixes some incorrect header guards
  cpufreq-dt: correct dead link in documentation
  cpufreq: ARM big LITTLE: correct dead link in documentation
  treewide: Fix typos in printk
  Documentation: filesystem: Fix typo in fs/eventfd.c
  fs/super.c: use && instead of & for warn_on condition
  Documentation: fix sysfs-ptp
  lib: scatterlist: fix Kconfig description

Pull livepatching updates from Jiri Kosina:

 - RO/NX attribute fixes for patch module relocations from Josh
   Poimboeuf.  As part of this effort, module.c has been cleaned up as
   well and livepatching is piggy-backing on this cleanup.  Rusty is OK
   with this whole lot going through livepatching tree.

 - symbol disambiguation support from Chris J Arges.  That series is
   also

Reviewed-by: Miroslav Benes <mbenes@suse.cz>

   but this came in only after I've alredy pushed out.  Didn't want to
   rebase because of that, hence I am mentioning it here.

 - symbol lookup fix from Miroslav Benes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: Cleanup module page permission changes
  module: keep percpu symbols in module's symtab
  module: clean up RO/NX handling.
  module: use a structure to encapsulate layout.
  gcov: use within_module() helper.
  module: Use the same logic for setting and unsetting RO/NX
  livepatch: function,sympos scheme in livepatch sysfs directory
  livepatch: add sympos as disambiguator field to klp_reloc
  livepatch: add old_sympos as disambiguator field to klp_func

Pull HID updates from Jiri Kosina:

 - appoint Benjamin Tissoires as co-maintainer / designated reviewer

 - sysfs report_descriptor visibility fix for unclaimed devices, from
   Andy Lutomirski

 - suspend/resume fixes for Sony driver from Frank Praznik

 - IRQ deadlock fix from Ioan-Adrian Ratiu

 - hid-i2c fixes affecting (at least) Yoga 900 from Mika Westerberg and
   Srinivas Pandruvada

 - a lot of new device support (especially, but not limited to, Wacom)
   and assorted small misc fixes

 - almost complete G920 support; the only bit that is missing is
   switching the device to HID mode automatically; Simon Wood and Michal
   Maly are working on it.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (46 commits)
  Revert "INPUT: xpad: switch Logitech G920 Wheel into HID mode"
  HID: sensor-hub: Add quirk for Lenovo Yoga 900 with ITE Chips
  HID: Add new PID for Microchip Pick16F1454
  HID: wacom: Use correct report to query pen ID from INTUOSHT2 devices
  HID: i2c-hid: Prevent sending reports from racing with device reset
  HID: use kobj_to_dev()
  HID: wiimote: use dev_to_wii()
  HID: add a new helper to_hid_driver()
  HID: use to_hid_device()
  HID: move to_hid_device() to hid.h
  HID: usbhid: use to_usb_device
  HID: corsair: Convert to use module_hid_driver
  HID: input: ignore the battery in OKLICK Laser BTmouse
  HID: wacom: Fix pad button range for CINTIQ_COMPANION_2
  HID: wacom: Fix touchring value reporting
  HID: wacom: Report 'strip2' values in ABS_RY
  HID: wacom: Limit touchstrip data to 13 bits
  HID: wacom: bitwise vs logical ORs
  HID: wacom: Apply lowres quirk to BAMBOO_TOUCH devices
  HID: enable hid device to suspend/resume asynchronously
  ...

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable fixes:
   - Fix a regression in the SunRPC socket polling code
   - Fix the attribute cache revalidation code
   - Fix race in __update_open_stateid()
   - Fix an lo->plh_block_lgets imbalance in layoutreturn
   - Fix an Oopsable typo in ff_mirror_match_fh()

  Features:
   - pNFS layout recall performance improvements.
   - pNFS/flexfiles: Support server-supplied layoutstats sampling period

  Bugfixes + cleanups:
   - NFSv4: Don't perform cached access checks before we've OPENed the
     file
   - Fix starvation issues with background flushes
   - Reclaim writes should be flushed as unstable writes if there are
     already entries in the commit lists
   - Various bugfixes from Chuck to fix NFS/RDMA send queue ordering
     problems
   - Ensure that we propagate fatal layoutget errors back to the
     application
   - Fixes for sundry flexfiles layoutstats bugs
   - Fix files/flexfiles to not cache invalidated layouts in the DS
     commit buckets"

* tag 'nfs-for-4.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (68 commits)
  NFS: Fix a compile warning about unused variable in nfs_generic_pg_pgios()
  NFSv4: Fix a compile warning about no prototype for nfs4_ioctl()
  NFS: Use wait_on_atomic_t() for unlock after readahead
  SUNRPC: Fixup socket wait for memory
  NFSv4.1/pNFS: Cleanup constify struct pnfs_layout_range arguments
  NFSv4.1/pnfs: Cleanup copying of pnfs_layout_range structures
  NFSv4.1/pNFS: Cleanup pnfs_mark_matching_lsegs_invalid()
  NFSv4.1/pNFS: Fix a race in initiate_file_draining()
  NFSv4.1/pNFS: pnfs_error_mark_layout_for_return() must always return layout
  NFSv4.1/pNFS: pnfs_mark_matching_lsegs_return() should set the iomode
  NFSv4.1/pNFS: Use nfs4_stateid_copy for copying stateids
  NFSv4.1/pNFS: Don't pass stateids by value to pnfs_send_layoutreturn()
  NFS: Relax requirements in nfs_flush_incompatible
  NFSv4.1/pNFS: Don't queue up a new commit if the layout segment is invalid
  NFS: Allow multiple commit requests in flight per file
  NFS/pNFS: Fix up pNFS write reschedule layering violations and bugs
  SUNRPC: Fix a missing break in rpc_anyaddr()
  pNFS/flexfiles: Fix an Oopsable typo in ff_mirror_match_fh()
  NFS: Fix attribute cache revalidation
  NFS: Ensure we revalidate attributes before using execute_ok()
  ...

Pull vfs fix from Al Viro:
 "Don't put symlink bodies in pagecache into highmem"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Make sure that highmem pages are not added to symlink page cache

This patch series makes swapin readahead up to a certain number to gain
more thp performance and adds tracepoint for khugepaged_scan_pmd,
collapse_huge_page, __collapse_huge_page_isolate.

This patch series was written to deal with programs that access most,
but not all, of their memory after they get swapped out.  Currently
these programs do not get their memory collapsed into THPs after the
system swapped their memory out, while they would get THPs before
swapping happened.

This patch series was tested with a test program, it allocates 400MB of
memory, writes to it, and then sleeps.  I force the system to swap out
all.  Afterwards, the test program touches the area by writing and
leaves a piece of it without writing.  This shows how much swap in
readahead made by the patch.

Test results:

                        After swapped out
-------------------------------------------------------------------
              | Anonymous | AnonHugePages | Swap      | Fraction  |
-------------------------------------------------------------------
With patch    | 90076 kB    | 88064 kB    | 309928 kB |    %99    |
-------------------------------------------------------------------
Without patch | 194068 kB | 192512 kB     | 205936 kB |    %99    |
-------------------------------------------------------------------

                        After swapped in
-------------------------------------------------------------------
              | Anonymous | AnonHugePages | Swap      | Fraction  |
-------------------------------------------------------------------
With patch    | 201408 kB | 198656 kB     | 198596 kB |    %98    |
-------------------------------------------------------------------
Without patch | 292624 kB | 192512 kB     | 107380 kB |    %65    |
-------------------------------------------------------------------

This patch (of 3):

Using static tracepoints, data of functions is recorded.  It is good to
automatize debugging without doing a lot of changes in the source code.

This patch adds tracepoint for khugepaged_scan_pmd, collapse_huge_page
and __collapse_huge_page_isolate.

[dan.carpenter@oracle.com: add a missing tab]
Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix a bug where a kernel warning is triggered when performing a memory
hotplug on ppc64.  This warning may also occur on any architecture that
uses the memory_probe_store interface.

  WARNING: at drivers/base/memory.c:200
  CPU: 9 PID: 13042 Comm: systemd-udevd Not tainted 4.4.0-rc4-00113-g0bd0f1e-dirty #7
  NIP [c00000000055e034] pages_correctly_reserved+0x134/0x1b0
  LR [c00000000055e7f8] memory_subsys_online+0x68/0x140
  Call Trace:
    memory_subsys_online+0x68/0x140
    device_online+0xb4/0x120
    store_mem_state+0xb0/0x180
    dev_attr_store+0x34/0x60
    sysfs_kf_write+0x64/0xa0
    kernfs_fop_write+0x17c/0x1e0
    __vfs_write+0x40/0x160
    vfs_write+0xb8/0x200
    SyS_write+0x60/0x110
    system_call+0x38/0xd0

The warning is triggered because there is a udev rule that automatically
tries to online memory after it has been added.  The udev rule varies
from distro to distro, but will generally look something like:

  SUBSYSTEM=="memory", ACTION=="add", ATTR{state}=="offline", ATTR{state}="online"

On any architecture that uses memory_probe_store to reserve memory, the
udev rule will be triggered after the first section of the block is
reserved and will subsequently attempt to online the entire block,
interrupting the memory reservation process and causing the warning.
This patch modifies memory_probe_store to add a block of memory with a
single call to add_memory as opposed to looping through and adding each
section individually.  A single call to add_memory is protected by the
mem_hotplug mutex which will prevent the udev rule from onlining memory
until the reservation of the entire block is complete.

Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Wang Xiaoqiang <wangxq10@lzu.edu.cn>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Running sparse on drivers/staging/lustre results in dozens of warnings:
include/linux/gfp.h:281:41: warning: odd constant _Bool cast (400000
becomes 1)

Use "!!" to explicitly convert to bool and get rid of the warning.

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When inspecting a vague code inside prctl(PR_SET_MM_MEM) call (which
testing the RLIMIT_DATA value to figure out if we're allowed to assign
new @start_brk, @brk, @start_data, @end_data from mm_struct) it's been
commited that RLIMIT_DATA in a form it's implemented now doesn't do
anything useful because most of user-space libraries use mmap() syscall
for dynamic memory allocations.

Linus suggested to convert RLIMIT_DATA rlimit into something suitable
for anonymous memory accounting.  But in this patch we go further, and
the changes are bundled together as:

 * keep vma counting if CONFIG_PROC_FS=n, will be used for limits
 * replace mm->shared_vm with better defined mm->data_vm
 * account anonymous executable areas as executable
 * account file-backed growsdown/up areas as stack
 * drop struct file* argument from vm_stat_account
 * enforce RLIMIT_DATA for size of data areas

This way code looks cleaner: now code/stack/data classification depends
only on vm_flags state:

 VM_EXEC & ~VM_WRITE            -> code  (VmExe + VmLib in proc)
 VM_GROWSUP | VM_GROWSDOWN      -> stack (VmStk)
 VM_WRITE & ~VM_SHARED & !stack -> data  (VmData)

The rest (VmSize - VmData - VmStk - VmExe - VmLib) could be called
"shared", but that might be strange beast like readonly-private or VM_IO
area.

 - RLIMIT_AS            limits whole address space "VmSize"
 - RLIMIT_STACK         limits stack "VmStk" (but each vma individually)
 - RLIMIT_DATA          now limits "VmData"

Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Kees Cook <keescook@google.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

for_each_free_mem_range() and for_each_free_mem_range_reverse() both
accept a 'flags' argument, the comment surrounding the macro placed the
'flags' documentation at the very end, while 'flags' is in fact the 3rd
argument to the macro, so let's preserve natural ordering here.

Fixes: fc6daaf9

 ("mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Move lru_to_page() from internal.h to mm_inline.h.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The Shared Memory accounting support is present in Kernel since commit
4b02108a

 ("mm: oom analysis: add shmem vmstat") and in userland
free(1) since 2014.  This patch updates the Documentation to reflect
this change.

Signed-off-by: Rodrigo Freire <rfreire@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Out of memory condition is not a bug and while we can't add new memory
in such case crashing the system seems wrong.  Propagating the return
value from register_memory_resource() requires interface change.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Sheng Yong <shengyong1@huawei.com>
Cc: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The Kconfig currently controlling compilation of this code is:

config HUGETLBFS
        bool "HugeTLB file system support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that when
reading the driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular case,
the init ordering gets moved to earlier levels when we use the more
appropriate initcalls here.

Originally I had the fs part and the mm part as separate commits, just
by happenstance of the nature of how I detected these non-modular use
cases.  But that can possibly introduce regressions if the patch merge
ordering puts the fs part 1st -- as the 0-day testing reported a splat
at mount time.

Investigating with "initcall_debug" showed that the delta was
init_hugetlbfs_fs being called _before_ hugetlb_init instead of after.  So
both the fs change and the mm change are here together.

In addition, it worked before due to luck of link order, since they were
both in the same initcall category.  So we now have the fs part using
fs_initcall, and the mm part using subsys_initcall, which puts it one
bucket earlier.  It now passes the basic sanity test that failed in
earlier 0-day testing.

We delete the MODULE_LICENSE tag and capture that information at the top
of the file alongside author comments, etc.

We don't replace module.h with init.h since the file already has that.
Also note that MODULE_ALIAS is a no-op for non-modular code.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Reported-by: kernel test robot <ying.huang@linux.intel.com>
Cc: Nadia Yvette Chambers <nyc@holomorphy.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use list_for_each_entry_safe() instead of list_for_each_safe() to
simplify the code.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

clear_soft_dirty_pmd() is called by clear_refs_write(CLEAR_REFS_SOFT_DIRTY),
VM_SOFTDIRTY was already cleared before walk_page_range().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The VM_BUG_ON_PAGE() would catch such cases if any still exists.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently the vmstat updater is not deferrable as a result of commit
ba4877b9 ("vmstat: do not use deferrable delayed work for
vmstat_update").  This in turn can cause multiple interruptions of the
applications because the vmstat updater may run at

Make vmstate_update deferrable again and provide a function that folds
the differentials when the processor is going to idle mode thus
addressing the issue of the above commit in a clean way.

Note that the shepherd thread will continue scanning the differentials
from another processor and will reenable the vmstat workers if it
detects any changes.

Fixes: ba4877b9

 ("vmstat: do not use deferrable delayed work for vmstat_update")
Signed-off-by: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A CONFIG_MEMCG=y kernel booted with "cgroup_disable=memory" crashes on a
NULL memcg (but non-NULL root_mem_cgroup) when vmpressure kicks in.
Here's the patch I use to avoid that, but you might prefer a test on
mem_cgroup_disabled() somewhere.

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

According to <linux/jump_label.h> the direct use of struct static_key is
deprecated.  Update the socket and slab accounting code accordingly.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David S. Miller <davem@davemloft.net>
Reported-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Let the networking stack know when a memcg is under reclaim pressure so
that it can clamp its transmit windows accordingly.

Whenever the reclaim efficiency of a cgroup's LRU lists drops low enough
for a MEDIUM or HIGH vmpressure event to occur, assert a pressure state
in the socket and tcp memory code that tells it to curb consumption
growth from sockets associated with said control group.

Traditionally, vmpressure reports for the entire subtree of a memcg
under pressure, which drops useful information on the individual groups
reclaimed.  However, it's too late to change the userinterface, so add a
second reporting mode that reports on the level of reclaim instead of at
the level of pressure, and use that report for sockets.

vmpressure events are naturally edge triggered, so for hysteresis assert
socket pressure for a second to allow for subsequent vmpressure events
to occur before letting the socket code return to normal.

This will likely need finetuning for a wider variety of workloads, but
for now stick to the vmpressure presets and keep hysteresis simple.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Socket memory can be a significant share of overall memory consumed by
common workloads.  In order to provide reasonable resource isolation in
the unified hierarchy, this type of memory needs to be included in the
tracking/accounting of a cgroup under active memory resource control.

Overhead is only incurred when a non-root control group is created AND
the memory controller is instructed to track and account the memory
footprint of that group.  cgroup.memory=nosocket can be specified on the
boot commandline to override any runtime configuration and forcibly
exclude socket memory from active memory resource control.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The unified hierarchy memory controller will account socket memory.
Move the infrastructure functions accordingly.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The unified hierarchy memory controller doesn't expose the memory+swap
counter to userspace, but its accounting is hardcoded in all charge
paths right now, including the per-cpu charge cache ("the stock").

To avoid adding yet more pointless memory+swap accounting with the
socket memory support in unified hierarchy, disable the counter
altogether when in unified hierarchy mode.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The unified hierarchy memory controller is going to use this jump label
as well to control the networking callbacks.  Move it to the memory
controller code and give it a more generic name.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There won't be any separate counters for socket memory consumed by
protocols other than TCP in the future.  Remove the indirection and link
sockets directly to their owning memory cgroup.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There won't be a tcp control soft limit, so integrating the memcg code
into the global skmem limiting scheme complicates things unnecessarily.
Replace this with simple and clear charge and uncharge calls--hidden
behind a jump label--to account skb memory.

Note that this is not purely aesthetic: as a result of shoehorning the
per-memcg code into the same memory accounting functions that handle the
global level, the old code would compare the per-memcg consumption
against the smaller of the per-memcg limit and the global limit.  This
allowed the total consumption of multiple sockets to exceed the global
limit, as long as the individual sockets stayed within bounds.  After
this change, the code will always compare the per-memcg consumption to
the per-memcg limit, and the global consumption to the global limit, and
thus close this loophole.

Without a soft limit, the per-memcg memory pressure state in sockets is
generally questionable.  However, we did it until now, so we continue to
enter it when the hard limit is hit, and packets are dropped, to let
other sockets in the cgroup know that they shouldn't grow their transmit
windows, either.  However, keep it simple in the new callback model and
leave memory pressure lazily when the next packet is accepted (as
opposed to doing it synchroneously when packets are processed).  When
packets are dropped, network performance will already be in the toilet,
so that should be a reasonable trade-off.

As described above, consumption is now checked on the per-memcg level
and the global level separately.  Likewise, memory pressure states are
maintained on both the per-memcg level and the global level, and a
socket is considered under pressure when either level asserts as much.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tcp_memcontrol replicates the global sysctl_mem limit array per cgroup,
but it only ever sets these entries to the value of the memory_allocated
page_counter limit.  Use the latter directly.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The number of allocated sockets is used for calculations in the soft
limit phase, where packets are accepted but the socket is under memory
pressure.
 Since there is no soft limit phase in tcp_memcontrol, and memory
pressure is only entered when packets are already dropped, this is
actually dead code.  Remove it.

As this is the last user of parent_cg_proto(), remove that too.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Move the jump-label from sock_update_memcg() and sock_release_memcg() to
the callsite, and so eliminate those function calls when socket
accounting is not enabled.

This also eliminates the need for dummy functions because the calls will
be optimized away if the Kconfig options are not enabled.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When a cgroup currently breaches its socket memory limit, it enters
memory pressure mode for itself and its *ancestors*.  This throttles
transmission in unrelated sibling and cousin subtrees that have nothing
to do with the breached limit.

On the contrary, breaching a limit should make that group and its
*children* enter memory pressure mode.  But this happens already, albeit
lazily: if an ancestor limit is breached, siblings will enter memory
pressure on their own once the next packet arrives for them.

So no additional hierarchy code is needed.  Remove the bogus stuff.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>