The JIT compiler emits ia32 bit instructions. Currently, It supports eBPF
only. Classic BPF is supported because of the conversion by BPF core.

Almost all instructions from eBPF ISA supported except the following:
BPF_ALU64 | BPF_DIV | BPF_K
BPF_ALU64 | BPF_DIV | BPF_X
BPF_ALU64 | BPF_MOD | BPF_K
BPF_ALU64 | BPF_MOD | BPF_X
BPF_STX | BPF_XADD | BPF_W
BPF_STX | BPF_XADD | BPF_DW

It doesn't support BPF_JMP|BPF_CALL with BPF_PSEUDO_CALL at the moment.

IA32 has few general purpose registers, EAX|EDX|ECX|EBX|ESI|EDI. I use
EAX|EDX|ECX|EBX as temporary registers to simulate instructions in eBPF
ISA, and allocate ESI|EDI to BPF_REG_AX for constant blinding, all others
eBPF registers, R0-R10, are simulated through scratch space on stack.

The reasons behind the hardware registers allocation policy are:
1:MUL need EAX:EDX, shift operation need ECX, so they aren't fit
  for general eBPF 64bit register simulation.
2:We need at least 4 registers to simulate most eBPF ISA operations
  on registers operands instead of on register&memory operands.
3:We need to put BPF_REG_AX on hardware registers, or constant blinding
  will degrade jit performance heavily.

Tested on PC (Intel(R) Core(TM) i5-5200U CPU).
Testing results on i5-5200U:
1) test_bpf: Summary: 349 PASSED, 0 FAILED, [319/341 JIT'ed]
2) test_progs: Summary: 83 PASSED, 0 FAILED.
3) test_lpm: OK
4) test_lru_map: OK
5) test_verifier: Summary: 828 PASSED, 0 FAILED.

Above tests are all done in following two conditions separately:
1:bpf_jit_enable=1 and bpf_jit_harden=0
2:bpf_jit_enable=1 and bpf_jit_harden=2

Below are some numbers for this jit implementation:
Note:
  I run test_progs in kselftest 100 times continuously for every condition,
  the numbers are in format: total/times=avg.
  The numbers that test_bpf reports show almost the same relation.

a:jit_enable=0 and jit_harden=0            b:jit_enable=1 and jit_harden=0
  test_pkt_access:PASS:ipv4:15622/100=156    test_pkt_access:PASS:ipv4:10674/100=106
  test_pkt_access:PASS:ipv6:9130/100=91      test_pkt_access:PASS:ipv6:4855/100=48
  test_xdp:PASS:ipv4:240198/100=2401         test_xdp:PASS:ipv4:138912/100=1389
  test_xdp:PASS:ipv6:137326/100=1373         test_xdp:PASS:ipv6:68542/100=685
  test_l4lb:PASS:ipv4:61100/100=611          test_l4lb:PASS:ipv4:37302/100=373
  test_l4lb:PASS:ipv6:101000/100=1010        test_l4lb:PASS:ipv6:55030/100=550

c:jit_enable=1 and jit_harden=2
  test_pkt_access:PASS:ipv4:10558/100=105
  test_pkt_access:PASS:ipv6:5092/100=50
  test_xdp:PASS:ipv4:131902/100=1319
  test_xdp:PASS:ipv6:77932/100=779
  test_l4lb:PASS:ipv4:38924/100=389
  test_l4lb:PASS:ipv6:57520/100=575

The numbers show we get 30%~50% improvement.

See Documentation/networking/filter.txt for more information.

Changelog:

 Changes v5-v6:
 1:Add do {} while (0) to RETPOLINE_RAX_BPF_JIT for
   consistence reason.
 2:Clean up non-standard comments, reported by Daniel Borkmann.
 3:Fix a memory leak issue, repoted by Daniel Borkmann.

 Changes v4-v5:
 1:Delete is_on_stack, BPF_REG_AX is the only one
   on real hardware registers, so just check with
   it.
 2:Apply commit 1612a981 ("bpf, x64: fix JIT emission
   for dead code"), suggested by Daniel Borkmann.

 Changes v3-v4:
 1:Fix changelog in commit.
   I install llvm-6.0, then test_progs willn't report errors.
   I submit another patch:
   "bpf: fix misaligned access for BPF_PROG_TYPE_PERF_EVENT program type on x86_32 platform"
   to fix another problem, after that patch, test_verifier willn't report errors too.
 2:Fix clear r0[1] twice unnecessarily in *BPF_IND|BPF_ABS* simulation.

 Changes v2-v3:
 1:Move BPF_REG_AX to real hardware registers for performance reason.
 3:Using bpf_load_pointer instead of bpf_jit32.S, suggested by Daniel Borkmann.
 4:Delete partial codes in 1c2a088a

, suggested by Daniel Borkmann.
 5:Some bug fixes and comments improvement.

 Changes v1-v2:
 1:Fix bug in emit_ia32_neg64.
 2:Fix bug in emit_ia32_arsh_r64.
 3:Delete filename in top level comment, suggested by Thomas Gleixner.
 4:Delete unnecessary boiler plate text, suggested by Thomas Gleixner.
 5:Rewrite some words in changelog.
 6:CodingSytle improvement and a little more comments.

Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The Python script used to parse and extract eBPF helpers documentation
from include/uapi/linux/bpf.h expects a very specific formatting for the
descriptions (single dot represents a space, '>' stands for a tab):

    /*
     ...
     *.int bpf_helper(list of arguments)
     *.>    Description
     *.>    >       Start of description
     *.>    >       Another line of description
     *.>    >       And yet another line of description
     *.>    Return
     *.>    >       0 on success, or a negative error in case of failure
     ...
     */

This is too strict, and painful for developers who wants to add
documentation for new helpers. Worse, it is extremely difficult to check
that the formatting is correct during reviews. Change the format
expected by the script and make it more flexible. The script now works
whether or not the initial space (right after the star) is present, and
accepts both tabs and white spaces (or a combination of both) for
indenting description sections and contents.

Concretely, something like the following would now be supported:

    /*
     ...
     *int bpf_helper(list of arguments)
     *......Description
     *.>    >       Start of description...
     *>     >       Another line of description
     *..............And yet another line of description
     *>     Return
     *.>    ........0 on success, or a negative error in case of failure
     ...
     */

While at it, remove unnecessary carets from each regex used with match()
in the script. They are redundant, as match() tries to match from the
beginning of the string by default.

v2: Remove unnecessary caret when a regex is used with match().

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

So by chance I looked into x86 assembly in arch/x86/net/bpf_jit_comp.c and
noticed the weird and inconsistent comment style it mistakenly learned from
the networking code:

 /* Multi-line comment ...
  * ... looks like this.
  */

Fix this to use the standard comment style specified in Documentation/CodingStyle
and used in arch/x86/ as well:

 /*
  * Multi-line comment ...
  * ... looks like this.
  */

Also, to quote Linus's ... more explicit views about this:

  http://article.gmane.org/gmane.linux.kernel.cryptoapi/21066



  > But no, the networking code picked *none* of the above sane formats.
  > Instead, it picked these two models that are just half-arsed
  > shit-for-brains:
  >
  >  (no)
  >      /* This is disgusting drug-induced
  >        * crap, and should die
  >        */
  >
  >   (no-no-no)
  >       /* This is also very nasty
  >        * and visually unbalanced */
  >
  > Please. The networking code actually has the *worst* possible comment
  > style. You can literally find that (no-no-no) style, which is just
  > really horribly disgusting and worse than the otherwise fairly similar
  > (d) in pretty much every way.

Also improve the comments and some other details while at it:

 - Don't mix same-line and previous-line comment style on otherwise
   identical code patterns within the same function,

 - capitalize 'BPF' and x86 register names consistently,

 - capitalize sentences consistently,

 - instead of 'x64' use 'x86-64': x64 is a Microsoft specific term,

 - use more consistent punctuation,

 - use standard coding style in macros as well,

 - fix typos and a few other minor details.

Consistent coding style is not optional, at least in arch/x86/.

No change in functionality.

( In case this commit causes conflicts with pending development code
  I'll be glad to help resolve any conflicts! )

Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

To make eBPF program load time easier to parse from "bpftool prog"
output for machines, change the time format used by the program. The
format now differs for plain and JSON version:

- Plain version uses a string formatted according to ISO 8601.
- JSON uses the number of seconds since the Epoch, wich is less friendly
  for humans but even easier to process.

Example output:

    # ./bpftool prog
    41298: xdp  tag a04f5eef06a7f555 dev foo
            loaded_at 2018-04-18T17:19:47+0100  uid 0
            xlated 16B  not jited  memlock 4096B

    # ./bpftool prog -p
    [{
            "id": 41298,
            "type": "xdp",
            "tag": "a04f5eef06a7f555",
            "gpl_compatible": false,
            "dev": {
                "ifindex": 14,
                "ns_dev": 3,
                "ns_inode": 4026531993,
                "ifname": "foo"
            },
            "loaded_at": 1524068387,
            "uid": 0,
            "bytes_xlated": 16,
            "jited": false,
            "bytes_memlock": 4096
        }
    ]

Previously, "Apr 18/17:19" would be used at both places.

Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Bring the erspan uapi header file so BPF tunnel helpers can use it.

Fixes: 933a741e

 ("selftests/bpf: bpf tunnel test.")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Quentin Monnet says:

====================
Here is a follow-up set for eBPF helper documentation, with two patches
to fix formatting issues:

- One to fix an error I introduced with the initial set for the doc.
- One for the newly added bpf_get_stack(), that is currently not parsed
  correctly with the Python script (function signature is fine, but
  description and return value appear as empty).

There is no change to text contents in this set.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Bring fixes for eBPF helper documentation formatting to bpf.h under
tools/ as well.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Fix formatting (indent) for bpf_get_stack() helper documentation, so
that the doc is rendered correctly with the Python script.

Fixes: c195651e

 ("bpf: add bpf_get_stack helper")
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Some edits brought to the last iteration of BPF helper functions
documentation introduced an error with RST formatting. As a result, most
of one paragraph is rendered in bold text when only the name of a helper
should be. Fix it, and fix formatting of another function name in the
same paragraph.

Fixes: c6b5fb86

 ("bpf: add documentation for eBPF helpers (42-50)")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

tracepoints to bpf core were added as a way to provide introspection
to bpf programs and maps, but after some time it became clear that
this approach is inadequate, so prog_id, map_id and corresponding
get_next_id, get_fd_by_id, get_info_by_fd, prog_query APIs were
introduced and fully adopted by bpftool and other applications.
The tracepoints in bpf core started to rot and causing syzbot warnings:
WARNING: CPU: 0 PID: 3008 at kernel/trace/trace_event_perf.c:274
Kernel panic - not syncing: panic_on_warn set ...
perf_trace_bpf_map_keyval+0x260/0xbd0 include/trace/events/bpf.h:228
trace_bpf_map_update_elem include/trace/events/bpf.h:274 [inline]
map_update_elem kernel/bpf/syscall.c:597 [inline]
SYSC_bpf kernel/bpf/syscall.c:1478 [inline]
Hence this patch deletes tracepoints in bpf core.

Reported-by: Eric Biggers <ebiggers3@gmail.com>
Reported-by: syzbot <bot+a9dbb3c3e64b62536a4bc5ee7bbd4ca627566188@syzkaller.appspotmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Commit d5a00528 ("syscalls/core, syscalls/x86: Rename
struct pt_regs-based sys_*() to __x64_sys_*()") renamed a lot
of syscall function sys_*() to __x64_sys_*().
This caused several kprobe based samples/bpf tests failing.

This patch fixed the problem in bpf_load.c.
For x86_64 architecture, function name __x64_sys_*() will be
first used for kprobe event creation. If the creation is successful,
it will be used. Otherwise, function name sys_*() will be used
for kprobe event creation.

Fixes: d5a00528

 ("syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Currently, the bpf_current_task_under_cgroup helper has a check where if
the BPF program is running in_interrupt(), it will return -EINVAL. This
prevents the helper to be used in many useful scenarios, particularly
BPF programs attached to Perf Events.

This commit removes the check. Tested a few NMI (Perf Event) and some
softirq context, the helper returns the correct result.

Signed-off-by: Teng Qin <qinteng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Andrey Ignatov says:

====================
BPF helpers documentation in UAPI refers to kernel ctx structures when it
has to refer to user visible ones. Fix it.
====================

Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The patch syncs bpf.h to tools/.

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Helpers may operate on two types of ctx structures: user visible ones
(e.g. `struct bpf_sock_ops`) when used in user programs, and kernel ones
(e.g. `struct bpf_sock_ops_kern`) in kernel implementation.

UAPI documentation must refer to only user visible structures.

The patch replaces references to `_kern` structures in BPF helpers
description by corresponding user visible structures.

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Yonghong Song says:

====================
Currently, stackmap and bpf_get_stackid helper are provided
for bpf program to get the stack trace. This approach has
a limitation though. If two stack traces have the same hash,
only one will get stored in the stackmap table regardless of
whether BPF_F_REUSE_STACKID is specified or not,
so some stack traces may be missing from user perspective.

This patch implements a new helper, bpf_get_stack, will
send stack traces directly to bpf program. The bpf program
is able to see all stack traces, and then can do in-kernel
processing or send stack traces to user space through
shared map or bpf_perf_event_output.

Patches #1 and #2 implemented the core kernel support.
Patch #3 removes two never-hit branches in verifier.
Patches #4 and #5 are two verifier improves to make
bpf programming easier. Patch #6 synced the new helper
to tools headers. Patch #7 moved perf_event polling code
and ksym lookup code from samples/bpf to
tools/testing/selftests/bpf. Patch #8 added a verifier
test in tools/bpf for new verifier change.
Patches #9 and #10 added tests for raw tracepoint prog
and tracepoint prog respectively.

Changelogs:
  v8 -> v9:
    . make function perf_event_mmap (in trace_helpers.c) extern
      to decouple perf_event_mmap and perf_event_poller.
    . add jit enabled handling for kernel stack verification
      in Patch #9. Since we did not have a good way to
      verify jit enabled kernel stack, just return true if
      the kernel stack is not empty.
    . In path #9, using raw_syscalls/sys_enter instead of
      sched/sched_switch, removed calling cmd
      "task 1 dd if=/dev/zero of=/dev/null" which is left
      with dangling process after the program exited.
  v7 -> v8:
    . rebase on top of latest bpf-next
    . simplify BPF_ARSH dst_reg->smin_val/smax_value tracking
    . rewrite the description of bpf_get_stack() in uapi bpf.h
      based on new format.
  v6 -> v7:
    . do perf callchain buffer allocation inside the
      verifier. so if the prog->has_callchain_buf is set,
      it is guaranteed that the buffer has been allocated.
    . change condition "trace_nr <= skip" to "trace_nr < skip"
      so that for zero size buffer, return 0 instead of -EFAULT
  v5 -> v6:
    . after refining return register smax_value and umax_value
      for helpers bpf_get_stack and bpf_probe_read_str,
      bounds and var_off of the return register are further refined.
    . added missing commit message for tools header sync commit.
    . removed one unnecessary empty line.
  v4 -> v5:
    . relied on dst_reg->var_off to refine umin_val/umax_val
      in verifier handling BPF_ARSH value range tracking,
      suggested by Edward.
  v3 -> v4:
    . fixed a bug when meta ptr is set to NULL in check_func_arg.
    . introduced tnum_arshift and added detailed comments for
      the underlying implementation
    . avoided using VLA in tools/bpf test_progs.
  v2 -> v3:
    . used meta to track helper memory size argument
    . implemented range checking for ARSH in verifier
    . moved perf event polling and ksym related functions
      from samples/bpf to tools/bpf
    . added test to compare build id's between bpf_get_stackid
      and bpf_get_stack
  v1 -> v2:
    . fixed compilation error when CONFIG_PERF_EVENTS is not enabled
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The test_stacktrace_map and test_stacktrace_build_id are
enhanced to call bpf_get_stack in the helper to get the
stack trace as well.  The stack traces from bpf_get_stack
and bpf_get_stackid are compared to ensure that for the
same stack as represented as the same hash, their ip addresses
or build id's must be the same.

Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The test attached a raw_tracepoint program to raw_syscalls/sys_enter.
It tested to get stack for user space, kernel space and user
space with build_id request. It also tested to get user
and kernel stack into the same buffer with back-to-back
bpf_get_stack helper calls.

If jit is not enabled, the user space application will check
to ensure that the kernel function for raw_tracepoint
___bpf_prog_run is part of the stack.

If jit is enabled, we did not have a reliable way to
verify the kernel stack, so just assume the kernel stack
is good when the kernel stack size is greater than 0.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The test_verifier already has a few ARSH test cases.
This patch adds a new test case which takes advantage of newly
improved verifier behavior for bpf_get_stack and ARSH.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

There is no functionality change in this patch. The common-purpose
trace functions, including perf_event polling and ksym lookup,
are moved from trace_output_user.c and bpf_load.c to
selftests/bpf/trace_helpers.c so that these function can
be reused later in selftests.

Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The tools header file bpf.h is synced with kernel uapi bpf.h.
The new helper is also added to bpf_helpers.h.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

When helpers like bpf_get_stack returns an int value
and later on used for arithmetic computation, the LSH and ARSH
operations are often required to get proper sign extension into
64-bit. For example, without this patch:
    54: R0=inv(id=0,umax_value=800)
    54: (bf) r8 = r0
    55: R0=inv(id=0,umax_value=800) R8_w=inv(id=0,umax_value=800)
    55: (67) r8 <<= 32
    56: R8_w=inv(id=0,umax_value=3435973836800,var_off=(0x0; 0x3ff00000000))
    56: (c7) r8 s>>= 32
    57: R8=inv(id=0)
With this patch:
    54: R0=inv(id=0,umax_value=800)
    54: (bf) r8 = r0
    55: R0=inv(id=0,umax_value=800) R8_w=inv(id=0,umax_value=800)
    55: (67) r8 <<= 32
    56: R8_w=inv(id=0,umax_value=3435973836800,var_off=(0x0; 0x3ff00000000))
    56: (c7) r8 s>>= 32
    57: R8=inv(id=0, umax_value=800,var_off=(0x0; 0x3ff))
With better range of "R8", later on when "R8" is added to other register,
e.g., a map pointer or scalar-value register, the better register
range can be derived and verifier failure may be avoided.

In our later example,
    ......
    usize = bpf_get_stack(ctx, raw_data, max_len, BPF_F_USER_STACK);
    if (usize < 0)
        return 0;
    ksize = bpf_get_stack(ctx, raw_data + usize, max_len - usize, 0);
    ......
Without improving ARSH value range tracking, the register representing
"max_len - usize" will have smin_value equal to S64_MIN and will be
rejected by verifier.

Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

In verifier function adjust_scalar_min_max_vals,
when src_known is false and the opcode is BPF_LSH/BPF_RSH,
early return will happen in the function. So remove
the branch in handling BPF_LSH/BPF_RSH when src_known is false.

Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The special property of return values for helpers bpf_get_stack
and bpf_probe_read_str are captured in verifier.
Both helpers return a negative error code or
a length, which is equal to or smaller than the buffer
size argument. This additional information in the
verifier can avoid the condition such as "retval > bufsize"
in the bpf program. For example, for the code blow,
    usize = bpf_get_stack(ctx, raw_data, max_len, BPF_F_USER_STACK);
    if (usize < 0 || usize > max_len)
        return 0;
The verifier may have the following errors:
    52: (85) call bpf_get_stack#65
     R0=map_value(id=0,off=0,ks=4,vs=1600,imm=0) R1_w=ctx(id=0,off=0,imm=0)
     R2_w=map_value(id=0,off=0,ks=4,vs=1600,imm=0) R3_w=inv800 R4_w=inv256
     R6=ctx(id=0,off=0,imm=0) R7=map_value(id=0,off=0,ks=4,vs=1600,imm=0)
     R9_w=inv800 R10=fp0,call_-1
    53: (bf) r8 = r0
    54: (bf) r1 = r8
    55: (67) r1 <<= 32
    56: (bf) r2 = r1
    57: (77) r2 >>= 32
    58: (25) if r2 > 0x31f goto pc+33
     R0=inv(id=0) R1=inv(id=0,smax_value=9223372032559808512,
                         umax_value=18446744069414584320,
                         var_off=(0x0; 0xffffffff00000000))
     R2=inv(id=0,umax_value=799,var_off=(0x0; 0x3ff))
     R6=ctx(id=0,off=0,imm=0) R7=map_value(id=0,off=0,ks=4,vs=1600,imm=0)
     R8=inv(id=0) R9=inv800 R10=fp0,call_-1
    59: (1f) r9 -= r8
    60: (c7) r1 s>>= 32
    61: (bf) r2 = r7
    62: (0f) r2 += r1
    math between map_value pointer and register with unbounded
    min value is not allowed
The failure is due to llvm compiler optimization where register "r2",
which is a copy of "r1", is tested for condition while later on "r1"
is used for map_ptr operation. The verifier is not able to track such
inst sequence effectively.

Without the "usize > max_len" condition, there is no llvm optimization
and the below generated code passed verifier:
    52: (85) call bpf_get_stack#65
     R0=map_value(id=0,off=0,ks=4,vs=1600,imm=0) R1_w=ctx(id=0,off=0,imm=0)
     R2_w=map_value(id=0,off=0,ks=4,vs=1600,imm=0) R3_w=inv800 R4_w=inv256
     R6=ctx(id=0,off=0,imm=0) R7=map_value(id=0,off=0,ks=4,vs=1600,imm=0)
     R9_w=inv800 R10=fp0,call_-1
    53: (b7) r1 = 0
    54: (bf) r8 = r0
    55: (67) r8 <<= 32
    56: (c7) r8 s>>= 32
    57: (6d) if r1 s> r8 goto pc+24
     R0=inv(id=0,umax_value=800,var_off=(0x0; 0x3ff))
     R1=inv0 R6=ctx(id=0,off=0,imm=0)
     R7=map_value(id=0,off=0,ks=4,vs=1600,imm=0)
     R8=inv(id=0,umax_value=800,var_off=(0x0; 0x3ff)) R9=inv800
     R10=fp0,call_-1
    58: (bf) r2 = r7
    59: (0f) r2 += r8
    60: (1f) r9 -= r8
    61: (bf) r1 = r6

Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Currently, stackmap and bpf_get_stackid helper are provided
for bpf program to get the stack trace. This approach has
a limitation though. If two stack traces have the same hash,
only one will get stored in the stackmap table,
so some stack traces are missing from user perspective.

This patch implements a new helper, bpf_get_stack, will
send stack traces directly to bpf program. The bpf program
is able to see all stack traces, and then can do in-kernel
processing or send stack traces to user space through
shared map or bpf_perf_event_output.

Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch didn't incur functionality change. The function prototype
got changed so that the same function can be reused later.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

When CONFIG_BPF_JIT_ALWAYS_ON is enabled, kernel has limitation for
bpf_jit_enable, so it has fixed value 1 and we cannot set it to 2
for JIT opcode dumping; this patch is to update the doc for it.

Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-04-27

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add extensive BPF helper description into include/uapi/linux/bpf.h
   and a new script bpf_helpers_doc.py which allows for generating a
   man page out of it. Thus, every helper in BPF now comes with proper
   function signature, detailed description and return code explanation,
   from Quentin.

2) Migrate the BPF collect metadata tunnel tests from BPF samples over
   to the BPF selftests and further extend them with v6 vxlan, geneve
   and ipip tests, simplify the ipip tests, improve documentation and
   convert to bpf_ntoh*() / bpf_hton*() api, from William.

3) Currently, helpers that expect ARG_PTR_TO_MAP_{KEY,VALUE} can only
   access stack and packet memory. Extend this to allow such helpers
   to also use map values, which enabled use cases where value from
   a first lookup can be directly used as a key for a second lookup,
   from Paul.

4) Add a new helper bpf_skb_get_xfrm_state() for tc BPF programs in
   order to retrieve XFRM state information containing SPI, peer
   address and reqid values, from Eyal.

5) Various optimizations in nfp driver's BPF JIT in order to turn ADD
   and SUB instructions with negative immediate into the opposite
   operation with a positive immediate such that nfp can better fit
   small immediates into instructions. Savings in instruction count
   up to 4% have been observed, from Jakub.

6) Add the BPF prog's gpl_compatible flag to struct bpf_prog_info
   and add support for dumping this through bpftool, from Jiri.

7) Move the BPF sockmap samples over into BPF selftests instead since
   sockmap was rather a series of tests than sample anyway and this way
   this can be run from automated bots, from John.

8) Follow-up fix for bpf_adjust_tail() helper in order to make it work
   with generic XDP, from Nikita.

9) Some follow-up cleanups to BTF, namely, removing unused defines from
   BTF uapi header and renaming 'name' struct btf_* members into name_off
   to make it more clear they are offsets into string section, from Martin.

10) Remove test_sock_addr from TEST_GEN_PROGS in BPF selftests since
    not run directly but invoked from test_sock_addr.sh, from Yonghong.

11) Remove redundant ret assignment in sample BPF loader, from Wang.

12) Add couple of missing files to BPF selftest's gitignore, from Anders.

There are two trivial merge conflicts while pulling:

  1) Remove samples/sockmap/Makefile since all sockmap tests have been
     moved to selftests.
  2) Add both hunks from tools/testing/selftests/bpf/.gitignore to the
     file since git should ignore all of them.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

2 redundant ret assignments removed:

* 'ret = 1' before the logic 'if (data_maps)', and if any errors jump to
  label 'done'. No 'ret = 1' needed before the error jump.

* After the '/* load programs */' part, if everything goes well, then
  the BPF code will be loaded and 'ret' set to 0 by load_and_attach().
  If something goes wrong, 'ret' set to none-O, the redundant 'ret = 0'
  after the for clause will make the error skipped.

  For example, if some BPF code cannot provide supported program types
  in ELF SEC("unknown"), the for clause will not call load_and_attach()
  to load the BPF code. 1 should be returned to callees instead of 0.

Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Quentin Monnet says:

====================
eBPF helper functions can be called from within eBPF programs to perform
a variety of tasks that would be otherwise hard or impossible to do with
eBPF itself. There is a growing number of such helper functions in the
kernel, but documentation is scarce. The main user space header file
does contain a short commented description of most helpers, but it is
somewhat outdated and not complete. It is more a "cheat sheet" than a
real documentation accessible to new eBPF developers.

This commit attempts to improve the situation by replacing the existing
overview for the helpers with a more developed description. Furthermore,
a Python script is added to generate a manual page for eBPF helpers. The
workflow is the following, and requires the rst2man utility:

    $ ./scripts/bpf_helpers_doc.py \
            --filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst
    $ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7
    $ man /tmp/bpf-helpers.7

The objective is to keep all documentation related to the helpers in a
single place, and to be able to generate from here a manual page that
could be packaged in the man-pages repository and shipped with most
distributions.

Additionally, parsing the prototypes of the helper functions could
hopefully be reused, with a different Printer object, to generate
header files needed in some eBPF-related projects.

Regarding the description of each helper, it comprises several items:

- The function prototype.
- A description of the function and of its arguments (except for a
  couple of cases, when there are no arguments and the return value
  makes the function usage really obvious).
- A description of return values (if not void).

Additional items such as the list of compatible eBPF program and map
types for each helper, Linux kernel version that introduced the helper,
GPL-only restriction, and commit hash could be added in the future, but
it was decided on the mailing list to leave them aside for now.

For several helpers, descriptions are inspired (at times, nearly copied)
from the commit logs introducing them in the kernel--Many thanks to
their respective authors! Some sentences were also adapted from comments
from the reviews, thanks to the reviewers as well. Descriptions were
completed as much as possible, the objective being to have something easily
accessible even for people just starting with eBPF. There is probably a bit
more work to do in this direction for some helpers.

Some RST formatting is used in the descriptions (not in function
prototypes, to keep them readable, but the Python script provided in
order to generate the RST for the manual page does add formatting to
prototypes, to produce something pretty) to get "bold" and "italics" in
manual pages. Hopefully, the descriptions in bpf.h file remains
perfectly readable. Note that the few trailing white spaces are
intentional, removing them would break paragraphs for rst2man.

The descriptions should ideally be updated each time someone adds a new
helper, or updates the behaviour (new socket option supported, ...) or
the interface (new flags available, ...) of existing ones.

To ease the review process, the documentation has been split into several
patches.

v3 -> v4:
- Add a patch (#9) for newly added BPF helpers.
- Add a patch (#10) to update UAPI bpf.h version under tools/.
- Use SPDX tag in Python script.
- Several fixes on man page header and footer, and helpers documentation.
  Please refer to individual patches for details.

RFC v2 -> PATCH v3:
Several fixes on man page header and footer, and helpers documentation.
Please refer to individual patches for details.

RFC v1 -> RFC v2:
- Remove "For" (compatible program and map types), "Since" (minimal
  Linux kernel version required), "GPL only" sections and commit hashes
  for the helpers.
- Add comment on top of the description list to explain how this
  documentation is supposed to be processed.
- Update Python script accordingly (remove the same sections, and remove
  paragraphs on program types and GPL restrictions from man page
  header).
- Split series into several patches.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: linux-doc@vger.kernel.org
Cc: linux-man@vger.kernel.org

Update tools/include/uapi/linux/bpf.h file in order to reflect the
changes for BPF helper functions documentation introduced in previous
commits.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.

The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.

This patch contains descriptions for the following helper functions:

Helper from Nikita:
- bpf_xdp_adjust_tail()

Helper from Eyal:
- bpf_skb_get_xfrm_state()

v4:
- New patch (helpers did not exist yet for previous versions).

Cc: Nikita V. Shirokov <tehnerd@tehnerd.com>
Cc: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.

The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.

This patch contains descriptions for the following helper functions, all
written by John:

- bpf_redirect_map()
- bpf_sk_redirect_map()
- bpf_sock_map_update()
- bpf_msg_redirect_map()
- bpf_msg_apply_bytes()
- bpf_msg_cork_bytes()
- bpf_msg_pull_data()

v4:
- bpf_redirect_map(): Fix typos: "XDP_ABORT" changed to "XDP_ABORTED",
  "his" to "this". Also add a paragraph on performance improvement over
  bpf_redirect() helper.

v3:
- bpf_sk_redirect_map(): Improve description of BPF_F_INGRESS flag.
- bpf_msg_redirect_map(): Improve description of BPF_F_INGRESS flag.
- bpf_redirect_map(): Fix note on CPU redirection, not fully implemented
  for generic XDP but supported on native XDP.
- bpf_msg_pull_data(): Clarify comment about invalidated verifier
  checks.

Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.

The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.

This patch contains descriptions for the following helper functions:

Helpers from Lawrence:
- bpf_setsockopt()
- bpf_getsockopt()
- bpf_sock_ops_cb_flags_set()

Helpers from Yonghong:
- bpf_perf_event_read_value()
- bpf_perf_prog_read_value()

Helper from Josef:
- bpf_override_return()

Helper from Andrey:
- bpf_bind()

v4:
- bpf_perf_event_read_value(): State that this helper should be
  preferred over bpf_perf_event_read().

v3:
- bpf_perf_event_read_value(): Fix time of selection for perf event type
  in description. Remove occurences of "cores" to avoid confusion with
  "CPU".
- bpf_bind(): Remove last paragraph of description, which was off topic.

Cc: Lawrence Brakmo <brakmo@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
[for bpf_perf_event_read_value(), bpf_perf_prog_read_value()]
Acked-by: Andrey Ignatov <rdna@fb.com>
[for bpf_bind()]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.

The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.

This patch contains descriptions for the following helper functions:

Helper from Kaixu:
- bpf_perf_event_read()

Helpers from Martin:
- bpf_skb_under_cgroup()
- bpf_xdp_adjust_head()

Helpers from Sargun:
- bpf_probe_write_user()
- bpf_current_task_under_cgroup()

Helper from Thomas:
- bpf_skb_change_head()

Helper from Gianluca:
- bpf_probe_read_str()

Helpers from Chenbo:
- bpf_get_socket_cookie()
- bpf_get_socket_uid()

v4:
- bpf_perf_event_read(): State that bpf_perf_event_read_value() should
  be preferred over this helper.
- bpf_skb_change_head(): Clarify comment about invalidated verifier
  checks.
- bpf_xdp_adjust_head(): Clarify comment about invalidated verifier
  checks.
- bpf_probe_write_user(): Add that dst must be a valid user space
  address.
- bpf_get_socket_cookie(): Improve description by making clearer that
  the cockie belongs to the socket, and state that it remains stable for
  the life of the socket.

v3:
- bpf_perf_event_read(): Fix time of selection for perf event type in
  description. Remove occurences of "cores" to avoid confusion with
  "CPU".

Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Gianluca Borello <g.borello@gmail.com>
Cc: Chenbo Feng <fengc@google.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
[for bpf_skb_under_cgroup(), bpf_xdp_adjust_head()]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.

The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.

This patch contains descriptions for the following helper functions, all
written by Daniel:

- bpf_get_hash_recalc()
- bpf_skb_change_tail()
- bpf_skb_pull_data()
- bpf_csum_update()
- bpf_set_hash_invalid()
- bpf_get_numa_node_id()
- bpf_set_hash()
- bpf_skb_adjust_room()
- bpf_xdp_adjust_meta()

v4:
- bpf_skb_change_tail(): Clarify comment about invalidated verifier
  checks.
- bpf_skb_pull_data(): Clarify the motivation for using this helper or
  bpf_skb_load_bytes(), on non-linear buffers. Fix RST formatting for
  *skb*. Clarify comment about invalidated verifier checks.
- bpf_csum_update(): Fix description of checksum (entire packet, not IP
  checksum). Fix a typo: "header" instead of "helper".
- bpf_set_hash_invalid(): Mention bpf_get_hash_recalc().
- bpf_get_numa_node_id(): State that the helper is not restricted to
  programs attached to sockets.
- bpf_skb_adjust_room(): Clarify comment about invalidated verifier
  checks.
- bpf_xdp_adjust_meta(): Clarify comment about invalidated verifier
  checks.

Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.

The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.

This patch contains descriptions for the following helper functions, all
written by Daniel:

- bpf_get_prandom_u32()
- bpf_get_smp_processor_id()
- bpf_get_cgroup_classid()
- bpf_get_route_realm()
- bpf_skb_load_bytes()
- bpf_csum_diff()
- bpf_skb_get_tunnel_opt()
- bpf_skb_set_tunnel_opt()
- bpf_skb_change_proto()
- bpf_skb_change_type()

v4:
- bpf_get_prandom_u32(): Warn that the prng is not cryptographically
  secure.
- bpf_get_smp_processor_id(): Fix a typo (case).
- bpf_get_cgroup_classid(): Clarify description. Add notes on the helper
  being limited to cgroup v1, and to egress path.
- bpf_get_route_realm(): Add comparison with bpf_get_cgroup_classid().
  Add a note about usage with TC and advantage of clsact. Fix a typo in
  return value ("sdb" instead of "skb").
- bpf_skb_load_bytes(): Make explicit loading large data loads it to the
  eBPF stack.
- bpf_csum_diff(): Add a note on seed that can be cascaded. Link to
  bpf_l3|l4_csum_replace().
- bpf_skb_get_tunnel_opt(): Add a note about usage with "collect
  metadata" mode, and example of this with Geneve.
- bpf_skb_set_tunnel_opt(): Add a link to bpf_skb_get_tunnel_opt()
  description.
- bpf_skb_change_proto(): Mention that the main use case is NAT64.
  Clarify comment about invalidated verifier checks.

v3:
- bpf_get_prandom_u32(): Fix helper name :(. Add description, including
  a note on the internal random state.
- bpf_get_smp_processor_id(): Add description, including a note on the
  processor id remaining stable during program run.
- bpf_get_cgroup_classid(): State that CONFIG_CGROUP_NET_CLASSID is
  required to use the helper. Add a reference to related documentation.
  State that placing a task in net_cls controller disables cgroup-bpf.
- bpf_get_route_realm(): State that CONFIG_CGROUP_NET_CLASSID is
  required to use this helper.
- bpf_skb_load_bytes(): Fix comment on current use cases for the helper.

Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.

The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.

This patch contains descriptions for the following helper functions, all
written by Alexei:

- bpf_get_current_pid_tgid()
- bpf_get_current_uid_gid()
- bpf_get_current_comm()
- bpf_skb_vlan_push()
- bpf_skb_vlan_pop()
- bpf_skb_get_tunnel_key()
- bpf_skb_set_tunnel_key()
- bpf_redirect()
- bpf_perf_event_output()
- bpf_get_stackid()
- bpf_get_current_task()

v4:
- bpf_redirect(): Fix typo: "XDP_ABORT" changed to "XDP_ABORTED". Add
  note on bpf_redirect_map() providing better performance. Replace "Save
  for" with "Except for".
- bpf_skb_vlan_push(): Clarify comment about invalidated verifier
  checks.
- bpf_skb_vlan_pop(): Clarify comment about invalidated verifier
  checks.
- bpf_skb_get_tunnel_key(): Add notes on tunnel_id, "collect metadata"
  mode, and example tunneling protocols with which it can be used.
- bpf_skb_set_tunnel_key(): Add a reference to the description of
  bpf_skb_get_tunnel_key().
- bpf_perf_event_output(): Specify that, and for what purpose, the
  helper can be used with programs attached to TC and XDP.

v3:
- bpf_skb_get_tunnel_key(): Change and improve description and example.
- bpf_redirect(): Improve description of BPF_F_INGRESS flag.
- bpf_perf_event_output(): Fix first sentence of description. Delete
  wrong statement on context being evaluated as a struct pt_reg. Remove
  the long yet incomplete example.
- bpf_get_stackid(): Add a note about PERF_MAX_STACK_DEPTH being
  configurable.

Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.

The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.

This patch contains descriptions for the following helper functions, all
written by Alexei:

- bpf_map_lookup_elem()
- bpf_map_update_elem()
- bpf_map_delete_elem()
- bpf_probe_read()
- bpf_ktime_get_ns()
- bpf_trace_printk()
- bpf_skb_store_bytes()
- bpf_l3_csum_replace()
- bpf_l4_csum_replace()
- bpf_tail_call()
- bpf_clone_redirect()

v4:
- bpf_map_lookup_elem(): Add "const" qualifier for key.
- bpf_map_update_elem(): Add "const" qualifier for key and value.
- bpf_map_lookup_elem(): Add "const" qualifier for key.
- bpf_skb_store_bytes(): Clarify comment about invalidated verifier
  checks.
- bpf_l3_csum_replace(): Mention L3 instead of just IP, and add a note
  about bpf_csum_diff().
- bpf_l4_csum_replace(): Mention L4 instead of just TCP/UDP, and add a
  note about bpf_csum_diff().
- bpf_tail_call(): Bring minor edits to description.
- bpf_clone_redirect(): Add a note about the relation with
  bpf_redirect(). Also clarify comment about invalidated verifier
  checks.

v3:
- bpf_map_lookup_elem(): Fix description of restrictions for flags
  related to the existence of the entry.
- bpf_trace_printk(): State that trace_pipe can be configured. Fix
  return value in case an unknown format specifier is met. Add a note on
  kernel log notice when the helper is used. Edit example.
- bpf_tail_call(): Improve comment on stack inheritance.
- bpf_clone_redirect(): Improve description of BPF_F_INGRESS flag.

Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Remove previous "overview" of eBPF helpers from user bpf.h header.
Replace it by a comment explaining how to process the new documentation
(to come in following patches) with a Python script to produce RST, then
man page documentation.

Also add the aforementioned Python script under scripts/. It is used to
process include/uapi/linux/bpf.h and to extract helper descriptions, to
turn it into a RST document that can further be processed with rst2man
to produce a man page. The script takes one "--filename <path/to/file>"
option. If the script is launched from scripts/ in the kernel root
directory, it should be able to find the location of the header to
parse, and "--filename <path/to/file>" is then optional. If it cannot
find the file, then the option becomes mandatory. RST-formatted
documentation is printed to standard output.

Typical workflow for producing the final man page would be:

    $ ./scripts/bpf_helpers_doc.py \
            --filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst
    $ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7
    $ man /tmp/bpf-helpers.7

Note that the tool kernel-doc cannot be used to document eBPF helpers,
whose signatures are not available directly in the header files
(pre-processor directives are used to produce them at the beginning of
the compilation process).

v4:
- Also remove overviews for newly added bpf_xdp_adjust_tail() and
  bpf_skb_get_xfrm_state().
- Remove vague statement about what helpers are restricted to GPL
  programs in "LICENSE" section for man page footer.
- Replace license boilerplate with SPDX tag for Python script.

v3:
- Change license for man page.
- Remove "for safety reasons" from man page header text.
- Change "packets metadata" to "packets" in man page header text.
- Move and fix comment on helpers introducing no overhead.
- Remove "NOTES" section from man page footer.
- Add "LICENSE" section to man page footer.
- Edit description of file include/uapi/linux/bpf.h in man page footer.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>