Pull mailbox updates from Jassi Brar:

 - new features (poll and SRAM usage) added to the mailbox-test driver

 - major update of Broadcom's PDC controller driver

 - minor fix for auto-loading test and STI driver modules

* 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: mailbox-test: allow reserved areas in SRAM
  mailbox: mailbox-test: add support for fasync/poll
  mailbox: bcm-pdc: Remove unnecessary void* casts
  mailbox: bcm-pdc: Simplify interrupt handler logic
  mailbox: bcm-pdc: Performance improvements
  mailbox: bcm-pdc: Don't use iowrite32 to write DMA descriptors
  mailbox: bcm-pdc: Convert from threaded IRQ to tasklet
  mailbox: bcm-pdc: Try to improve branch prediction
  mailbox: bcm-pdc: streamline rx code
  mailbox: bcm-pdc: Convert from interrupts to poll for tx done
  mailbox: bcm-pdc: PDC driver leaves debugfs files after removal
  mailbox: bcm-pdc: Changes so mbox client can be removed / re-inserted
  mailbox: bcm-pdc: Use octal permissions rather than symbolic
  mailbox: sti: Fix module autoload for OF registration
  mailbox: mailbox-test: Fix module autoload

Pull i2c fixes from Wolfram Sang.

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mux: mlxcpld: fix i2c mux selection caching
  i2c: designware: fix wrong Tx/Rx FIFO for ACPI
  i2c: xgene: Fix missing code of DTB support
  i2c: mux: pca954x: fix i2c mux selection caching
  i2c: octeon: thunderx: Limit register access retries

Pull documentation fix from Jonathan Corbet:
 "A single fix for the build system.

  It would appear that the docutils developers, in their wisdom, broke
  the API in the 0.13 release. This fix detects the breakage and allows
  the docs to be built with both the old and new versions"

* tag 'doc-4.10-3' of git://git.lwn.net/linux:
  docs: sphinx-extensions: make rstFlatTable work with docutils 0.13

Pull arch/microblaze updates from Michal Simek:

 - wire-up new syscalls

 - add new codes and fpga families

 - fix a return value

* tag 'microblaze-4.10-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Add new fpga families
  microblaze: Add missing release version code v9.6 and v10
  microblaze: Add missing syscalls
  microblaze: Fix return value from xilinx_timer_init

Pull Xtensa updates from Max Filippov:

 - enable HAVE_DMA_CONTIGUOUS, configure shared DMA pool reservation in
   kc705 DTS

 - update xtensa DMA-related Documentation/features entries

 - clean up arch/xtensa/kernel/setup.c: move S32C1I self-test out of it,
   remove unused declarations, fix screen_info definition

* tag 'xtensa-20161219' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: update DMA-related Documentation/features entries
  xtensa: configure shared DMA pool reservation in kc705 DTS
  xtensa: enable HAVE_DMA_CONTIGUOUS
  xtensa: move S32C1I self-test to a separate file
  xtensa: fix screen_info, clean up unused declarations in setup.c

Pull quota, fsnotify and ext2 updates from Jan Kara:
 "Changes to locking of some quota operations from dedicated quota mutex
  to s_umount semaphore, a fsnotify fix and a simple ext2 fix"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Fix bogus warning in dquot_disable()
  fsnotify: Fix possible use-after-free in inode iteration on umount
  ext2: reject inodes with negative size
  quota: Remove dqonoff_mutex
  ocfs2: Use s_umount for quota recovery protection
  quota: Remove dqonoff_mutex from dquot_scan_active()
  ocfs2: Protect periodic quota syncing with s_umount semaphore
  quota: Use s_umount protection for quota operations
  quota: Hold s_umount in exclusive mode when enabling / disabling quotas
  fs: Provide function to get superblock with exclusive s_umount

Pull KVM fixes from Paolo Bonzini:
 "Early fixes for x86.

  Instead of the (botched) revert, the lockdep/might_sleep splat has a
  real fix provided by Andrea"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: nVMX: Allow L1 to intercept software exceptions (#BP and #OF)
  kvm: take srcu lock around kvm_steal_time_set_preempted()
  kvm: fix schedule in atomic in kvm_steal_time_set_preempted()
  KVM: hyperv: fix locking of struct kvm_hv fields
  KVM: x86: Expose Intel AVX512IFMA/AVX512VBMI/SHA features to guest.
  kvm: nVMX: Correct a VMX instruction error code for VMPTRLD

Pull dmi fix from Jean Delvare.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  firmware: dmi_scan: Always show system identification string

Pull MFD updates from Lee Jones:
 "New Device Support
   - Add support for Ricoh RC5T619 PMIC to rn5t618
   - Add support for PM8821 PMIC to qcom-pm8xxx

  New Functionality:
   - Add support for GPIO to lpc_ich
   - Add support for GPADC to sun4i
   - Add ability for rk808 to shutdown

  Fix-ups:
   - Simplify/strip unnecessary code; tps65218, palmas, tps65217
   - Device Tree binding updates; tps65218, altera-a10sr
   - Provide/export device ID info; tps65218, axp20x-i2c, hi655x-pmic,
     fsl-imx25-tsadc, intel_soc_pmic_bxtwc
   - Use MFD API instead of of_platform_populate(); tps65218
   - Generalise name-space; pm8xxx
   - Supply/edit regmap configuration; axp20x, cs47l24-tables, axp20x
   - Enable compile testing; max77620, max77686, exynos-lpass,
     abx500-core
   - Coding style issues; wm8994-core, wm5102-tables
   - Supply endian support; syscon
   - Remove module support; ab3100-core, ab8500-debugfs, ab8500-gpadc,
     abx500-core

  Bug Fixes:
   - Fix ordering issues; wm8994
   - Fix dependencies (build-time/run-time); exynos_lpass, sun4i-gpadc
   - Fix compiler warnings; sun4i-gpadc
   - Fix leaks; mfd-core
   - Fix page fault during module unload; tps65217"

* tag 'mfd-for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
  mfd: tps65217: Support an interrupt pin as the system wakeup
  mfd: tps65217: Make an interrupt handler simpler
  mfd: tps65217: Update register interrupt mask bits instead of writing operation
  mfd: tps65217: Specify the IRQ name
  mfd: tps65217: Fix page fault on unloading modules
  mfd: palmas: Remove redundant check in palmas_power_off
  mfd: arizona: Disable IRQs during driver remove
  mfd: pm8xxx: add support to pm8821
  mfd: intel-lpss: Try to enable Memory-Write-Invalidate
  mfd: rn5t618: Add Ricoh RC5T619 PMIC support
  mfd: axp20x: Add address extension registers for AXP806 regmap
  mfd: intel_soc_pmic_bxtwc: Fix a typo in MODULE_DEVICE_TABLE()
  mfd: core: Fix device reference leak in mfd_clone_cell
  mfd: bcm590xx: Simplify a test
  mfd: sun4i-gpadc: Select regmap-irq
  mfd: abx500-core: drop unused MODULE_ tags from non-modular code
  mfd: ab8500: make sysctrl explicitly non-modular
  mfd: ab8500-gpadc: Make it explicitly non-modular
  mfd: ab8500-debugfs: Make it explicitly non-modular
  mfd: ab8500-core: Make it explicitly non-modular
  ...

When L2 exits to L0 due to "exception or NMI", software exceptions
(#BP and #OF) for which L1 has requested an intercept should be
handled by L1 rather than L0. Previously, only hardware exceptions
were forwarded to L1.

Signed-off-by: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm_memslots() will be called by kvm_write_guest_offset_cached() so
take the srcu lock.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm_steal_time_set_preempted() isn't disabling the pagefaults before
calling __copy_to_user and the kernel debug notices.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When CONFIG_SRAM is enable and the SRAM region is found, the entire SRAM
region resource is requested and marked as occupied by SRAM driver even
if certain parts of regions is marked reserved.

It's quite possible that a small region of the SRAM is reserved for all
the mailbox communication and hence it may fail to request the region
as it's already marked busy region.

This patch tries to just do a ioremap of this mailbox memory region if
it finds it busy.

Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Currently the read operation on the message debug file returns error if
there's no data ready to be read. It expects the userspace to retry if
it fails. Since the mailbox response could be asynchronous, it would be
good to add support to block the read until the data is available.

We can also implement poll file operations so that the userspace can
wait to become ready to perform any I/O.

This patch implements the poll and fasync file operation callback for
the test mailbox device.

Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Remove unnecessary void* casts in register writes. Fix two other
minor formatting issues.

Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Earlier versions of the PDC driver registered for both
transmit and receive interrupts. The hard IRQ handler had to
communicate to the soft handler which interrupt(s) had occurred.
The PDC driver no longer registers for tx interrupts. So there is
no reason to save the intstatus. So remove the intstatus member
of the PDC state.

Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Three changes to improve performance in the PDC driver:
- disable and reenable interrupts while the interrupt handler is
running
- update rxin and txin descriptor indexes more efficiently
- group receive descriptor context into a structure and keep
context in a single array rather than five to improve locality
of reference

Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

In PDC driver, it is not necessary to use iowrite32()
when writing DMA descriptors to the transmit and receive rings.
The ring memory is in host memory. So convert to normal
assignment statements.

Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Previously used threaded IRQs in the PDC driver to defer
processing the rx DMA ring after getting an rx done interrupt.
Instead, use a tasklet at normal priority for deferred processing.

Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Use likely/unlikely directives to improve branch prediction.

Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Remove the unnecessary rmb() from the receive path.

If the rx ring has multiple messages ready, avoid reading
last_rx_curr multiple times from the register.

Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

The PDC driver is a mailbox controller. A mailbox controller
can report that a mailbox message has been "transmitted" either when
a tx interrupt fires or by having the mailbox framework poll. This
commit converts the PDC driver to the poll method. We found that the
tx interrupt happens when the descriptors are read by the SPU hw. Thus,
the interrupt method does not allow more than one tx message in the PDC
tx DMA ring at a time. To keep the SPU hw busy, we would like to keep
the tx ring full under heavy load.

With the poll method, the PDC driver responds that the previous message
has been transmitted if the tx ring has space for another message.
SPU request messages take a variable number of descriptors. If 15
descriptors are available, there is a good chance another message will
fit. Also increased the ring size from 128 to 512 descriptors.

With this change, I found the PDC driver hangs on its spinlock under
heavy load. The PDC spinlock is not required; so I removed it. Calls
to pdc_send_data() are already synchronized because of the channel
spinlock in the mailbox framework. Other references to ring indexes
should not require locking because they only written on either the
tx or rx side.

Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Minor fix to ensure that debugfs stats pseudo-files are
removed when driver module is unloaded.  Previously, the call to
debugfs_remove_recursive() was never being called since the
directory was not empty, and a seg fault would occur if another
process tried to access these leftover files.

Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Ensure that DMA is disabled, and pointers reset, when changing
DMA base addresses in pdc_ring_init().  This allows a mailbox client
to be re-inserted after being removed.  Otherwise, the DMA doesn't
restart so the client hangs while being reinserted.

Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

When creating the debugfs files for the PDC driver, use
octal file permissions rather than symbolic file permissions.

Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/mailbox/mailbox-sti.ko | grep alias
alias:          platform:mailbox-sti

After this patch:

$ modinfo drivers/mailbox/mailbox-sti.ko | grep alias
alias:          platform:mailbox-sti
alias:          of:N*T*Cst,stih407-mailboxC*
alias:          of:N*T*Cst,stih407-mailbox

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/mailbox/mailbox-test.ko | grep alias
$

After this patch:

$ modinfo drivers/mailbox/mailbox-test.ko | grep alias
alias:          of:N*T*Cmailbox-testC*
alias:          of:N*T*Cmailbox-test

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

dquot_disable() was warning when sb_has_quota_loaded() was true when
invalidating page cache for quota files. The thinking behind this
warning was that we must have raced with somebody else turning quotas on
and this should not happen because all places modifying quota state must
hold s_umount exclusively now. However sb_has_quota_loaded() can be also
true at this point when we are just suspending quotas on remount
read-only. Just restore the behavior to situation before commit
c3b00446 ("quota: Remove dqonoff_mutex") which introduced the
warning.

The code in dquot_disable() can be further simplified with the new
locking of quota state changes however let's leave that to a separate
commit that can get more testing exposure.

Fixes: c3b00446


Signed-off-by: Jan Kara <jack@suse.cz>

Let's keep consistent when print dmi_ids_string between SMBIOS 2.x
and SMBIOS 3.x, and always show the system identification string,
like Vendor, Product/Board name and BIOS infos.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>

Pull RTC updates from Alexandre Belloni:
  "Subsystem:
   - non-modular drivers are now explicitly non-modular

  New driver:
    - Epson Toyocom rtc-7301sf/dg

  Drivers:
   - cmos: reject unsupported alarm values wrt the RTC capabilities
   - ds1307: ACPI support
   - jz4740: DT support, jz4780 handling, can now be used as a system
     power controller
   - mcp795: many fixes, in particular proper month handling
   - twl: driver is now DT only"

* tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits)
  rtc: mcp795: Fix whitespace and indentation.
  rtc: mcp795: Prefer using the BIT() macro.
  rtc: mcp795: fix month write resetting date to 1.
  rtc: mcp795: fix time range difference between linux and RTC chip.
  rtc: mcp795: fix bitmask value for leap year (LP).
  rtc: mcp795: use bcd2bin/bin2bcd.
  rtc: add support for EPSON TOYOCOM RTC-7301SF/DG
  rtc: ds1307: Add ACPI support
  rtc: imxdi: (trivial) fix a typo
  rtc: ds1374: Merge conditional + WARN_ON()
  rtc: twl: make driver DT only
  rtc: twl: kill static variables
  rtc: fix typos in Kconfig
  rtc: jz4740: make the driver builtin only
  rtc: jz4740: remove unused EXPORT_SYMBOL
  Documentation: bindings: fix twl-rtc documentation
  rtc: Enable compile testing for Maxim and Samsung drivers
  MIPS: jz4740: Remove obsolete code
  MIPS: qi_lb60: Probe RTC driver from DT and use it as power controller
  MIPS: jz4740: DTS: Probe the jz4740-rtc driver from devicetree
  ...

Fix whitespace and indentation errors and the following
checkpatch warnings:
- line 15: Block comments use a trailing */ on a separate line
- line 256: Line over 80 characters
No code change.

Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

This patch doesn't change the code but replaces all bitmask values
with the BIT(x) macro.

Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

According to Microchip errata some combinations of date and month
values may result in the date being reset to 1, even if the date
is also written with the month (for example 31-07 or 31-08).
As a workaround avoid writing date and month values within the same
Write command. Instead, terminate the Write command after loading
the date and begin a new command to write the month. In addition,
disable the oscillator before loading the new values. This is done
by ensuring both the ST and EXTOSC bits are cleared and waiting for
the OSCON bit to clear.

Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

In linux rtc_time struct, tm_mon range is 0~11, while in RTC HW REG,
month range is 1~12. This patch adjusts difference of them.

Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

According the datasheet the leap year is a fifth bit in month register.

Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Change rtc-mcp795.c to use the bcd2bin/bin2bcd functions.
This change fixes the wrong conversion of month value
from binary to BCD (missing right shift operation for 10 month).

Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

This adds support for EPSON TOYOCOM RTC-7301SF/DG which has parallel
interface compatible with SRAM.

This driver supports basic clock, calendar and alarm functionality.

Tested with Microblaze linux running on Artix7 FPGA board with my own
custom IP for RTC-7301.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

This patch enables ACPI support for rtc-ds1307 driver.

Signed-off-by: Tin Huynh <tnhuynh@apm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Pull libnvdimm updates from Dan Williams:
 "The libnvdimm pull request is relatively small this time around due to
  some development topics being deferred to 4.11.

  As for this pull request the bulk of it has been in -next for several
  releases leading to one late fix being added (commit 868f036f
  ("libnvdimm: fix mishandled nvdimm_clear_poison() return value")). It
  has received a build success notification from the 0day-kbuild robot
  and passes the latest libnvdimm unit tests.

  Summary:

   - Dynamic label support: To date namespace label support has been
     limited to disambiguating cases where PMEM (direct load/store) and
     BLK (mmio aperture) accessed-capacity alias on the same DIMM. Since
     4.9 added support for multiple namespaces per PMEM-region there is
     value to support namespace labels even in the non-aliasing case.
     The presence of a valid namespace index block force-enables label
     support when the kernel would otherwise rely on region boundaries,
     and permits the region to be sub-divided.

   - Handle media errors in namespace metadata: Complement the error
     handling for media errors in namespace data areas with support for
     clearing errors on writes, and downgrading potential machine-check
     exceptions to simple i/o errors on read.

   - Device-DAX region attributes: Add 'align', 'id', and 'size' as
     attributes for device-dax regions. In particular this enables
     userspace tooling to generically size memory mapping and i/o
     operations. Prevent userspace from growing assumptions /
     dependencies about the parent device topology for a dax region. A
     libnvdimm namespace may not always be the parent device of a dax
     region.

   - Various cleanups and small fixes"

* tag 'libnvdimm-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: add region 'id', 'size', and 'align' attributes
  libnvdimm: fix mishandled nvdimm_clear_poison() return value
  libnvdimm: replace mutex_is_locked() warnings with lockdep_assert_held
  libnvdimm, pfn: fix align attribute
  libnvdimm, e820: use module_platform_driver
  libnvdimm, namespace: use octal for permissions
  libnvdimm, namespace: avoid multiple sector calculations
  libnvdimm: remove else after return in nsio_rw_bytes()
  libnvdimm, namespace: fix the type of name variable
  libnvdimm: use consistent naming for request_mem_region()
  nvdimm: use the right length of "pmem"
  libnvdimm: check and clear poison before writing to pmem
  tools/testing/nvdimm: dynamic label support
  libnvdimm: allow a platform to force enable label support
  libnvdimm: use generic iostat interfaces

Merge tag 'platform-drivers-x86-v4.10-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull more x86 platform driver updates from Darren Hart:
 "Move and add registration for the mlx-platform driver. Introduce
  button and lid drivers for the surface3 (different from the
  surface3-pro). Add BXT PMIC TMU support. Add Y700 to existing
  ideapad-laptop quirk.

  Summary:

  ideapad-laptop:
   - Add Y700 15-ACZ to no_hw_rfkill DMI list

  surface3_button:
   - Introduce button support for the Surface 3

  surface3-wmi:
   - Add custom surface3 platform device for controlling LID
   - Balance locking on error path

  mlx-platform:
   - Add mlxcpld-hotplug driver registration
   - Fix semicolon.cocci warnings
   - Move module from arch/x86

  platform/x86:
   - Add Whiskey Cove PMIC TMU support"

* tag 'platform-drivers-x86-v4.10-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  platform/x86: surface3-wmi: Balance locking on error path
  platform/x86: Add Whiskey Cove PMIC TMU support
  platform/x86: ideapad-laptop: Add Y700 15-ACZ to no_hw_rfkill DMI list
  platform/x86: Introduce button support for the Surface 3
  platform/x86: Add custom surface3 platform device for controlling LID
  platform/x86: mlx-platform: Add mlxcpld-hotplug driver registration
  platform/x86: mlx-platform: Fix semicolon.cocci warnings
  platform/x86: mlx-platform: Move module from arch/x86