The following samsung branches are based on these cleanups,
which are already in mainline before this branch gets pulled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v3.17/soc-new' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Merge "SoC related changes for omaps for v3.17 merge window"
from Tony Lindgren:

- Add device tree and hwmod data for various devices
  for new SoCs

- Remove legacy mailbox hwmod data that's no longer
  needed for SoCs that are DT only. Note that this may
  cause a minor merge conflict in mach-omap2/devices.c
  with omap_init_mbox() and omap_init_hdmi_audio(), both
  are legacy code that is getting removed

* tag 'omap-for-v3.17/soc-new' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap

:
  ARM: DRA7: hwmod: Add data for RTC
  arm: dra7xx: Add hwmod data for MDIO and CPSW
  arm: dra7xx: Add hwmod data for pcie1 and pcie2 subsystems
  arm: dra7xx: Add hwmod data for pcie1 phy and pcie2 phy
  ARM: DRA7: hwmod: Add OCP2SCP3 module
  ARM: DRA7: hwmod: remove interrupts for DMA
  ARM: OMAP2+: DMA: remove requirement of irq for platform-dma driver
  ARM: AM33xx: hwmod_data: Remove legacy mailbox addrs
  ARM: OMAP4: hwmod_data: Remove legacy mailbox addrs
  ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs
  ARM: OMAP2+: Avoid mailbox legacy device creation for DT-boot
  ARM: DRA7: hwmod_data: Add mailbox hwmod data
  ARM: dts: DRA7: Add mailbox nodes
  ARM: dts: AM4372: Correct mailbox node data
  ARM: dts: AM33xx: Add mailbox node
  ARM: dts: OMAP4: Add mailbox node
  ARM: dts: OMAP2+: Add mailbox fifo and user information
  ARM: AM43xx: hwmod: add DSS hwmod data

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This is a dependency for the omap/soc branch

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge basic support for the Mediatek Cortex-A7 SoCs from Matthias Brugger:

Support is quite basic, as the only component working up to now are the
timers.

* tag 'v3.17-next-mediatek-support' of https://github.com/mbgg/linux-mediatek

:
  arm: mediatek: add dts for Aquaris5 mobile phone
  dt-bindings: add documentation for Mediatek SoC
  arm: add basic support for Mediatek MT6589 boards

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'for-v3.17/omap-hwmod-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.17/soc

OMAP hwmod data additions for v3.17.  Most of these are DRA7xx-related,
although one patch adds DSS hwmods for AM43xx.

Basic build, boot, and PM test results are available here:

http://www.pwsan.com/omap/testlogs/hwmod-a-v3.17/20140722143514/

Add hwmod data for RTC

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Rajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: updated to apply]
Signed-off-by: Paul Walmsley <paul@pwsan.com>

Adding hwmod data for CPSW and MDIO which is present in DRA7xx SoC

Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Tested-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

Added hwmod data for pcie1 and pcie2 subsystem present in DRA7xx SOC.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Tested-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

Added hwmod data for pcie1 and pcie2 phy present in DRA7xx SOC.
Also added the missing CLKCTRL OFFSET macro and CONTEXT OFFSET macro
for pcie1 phy and pcie2 phy.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Tested-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

This module is needed for the SATA and PCIe PHYs.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Rajendra Nayak <rnayak@ti.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

The Aquaris5 is a mobile phone based on the MT6589 SoC.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This adds a DT binding documentation for the MT6589 SoC from Mediatek.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>

This adds a generic devicetree board file and a dtsi for boards
based on MT6589 SoCs from Mediatek.

Apart from the generic parts (gic, clocks) the only component
currently supported are the timers.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

DMA interrupts are now available in of, and the definitions are
duplicates in hwmod. This prevents us from dynamically allocating
interrupt resources for dma from devicetree.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

we have currently 2 DMA drivers that try to co-exist.
drivers/dma/omap-dma.c which registers it's own IRQ and is device tree
aware and uses arch/arm/plat-omap/dma.c instance created by
arch/arm/mach-omap2/dma.c to maintain channel usage (omap_request_dma).

Currently both try to register interrupts and mach-omap2/plat-omap dma.c
attempts to use the IRQ number registered by hwmod to register it's own
interrupt handler.

Now, there is no reasonable way of static allocating DMA irq in GIC
SPI when we use crossbar. However, since the dma_chan structure is
freed as a result of IRQ not being present due to devm allocation,
maintaining information of channel by platform code fails at a later
point in time when that region of memory is reused.

So, if hwmod does not indicate an IRQ number, then, assume that
dma-engine will take care of the interrupt handling.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'for-v3.17/omap-clock-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.17/soc

An OMAP clock cleanup series for 3.17 from Tero Kristo.
This is in preparation for moving this code into drivers/clk/ti.

Basic build, boot, and PM test logs are here:

http://www.pwsan.com/omap/testlogs/clock-a-v3.17/20140717034329/

Pull more IIO driver fixes from Greg KH:
 "Here are two IIO driver fixes for 3.16-rc6 that resolve some reported
  issues"

* tag 'staging-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: mma8452: Use correct acceleration units.
  iio:core: Handle error when mask type is not separate

Pull USB fixes from Greg KH:
 "Here are two USB patches that resolve some reported issues, one with
  an odd HUB, and one in the chipidea driver"

* tag 'usb-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: Check if port status is equal to RxDetect
  usb: chipidea: udc: Disable auto ZLP generation on ep0

Merge tag 'driver-core-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "Here is a single driver core fix that reverts an older patch that has
  been causing a number of reported problems with the platform devices.

  This revert has been in linux-next for a while with no reported issues"

* tag 'driver-core-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  platform_get_irq: Revert to platform_get_resource if of_irq_get fails

Pull char/misc fix from Greg KH:
 "Here's a single hyper-v driver fix for a reported issue"

* tag 'char-misc-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Drivers: hv: hv_fcopy: fix a race condition for SMP guest

Pull intel drm fixes from Dave Airlie:
 "Intel fixes came in late, but since I debugged one of them I'll send
  them on,

  Two reverts, a quirk and one warn regression"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  Revert "drm/i915: reverse dp link param selection, prefer fast over wide again"
  drm/i915: Track the primary plane correctly when reassigning planes
  drm/i915: Ignore VBT backlight presence check on HP Chromebook 14
  Revert "drm/i915: Don't set the 8to6 dither flag when not scaling"

Pull UML fixes from Richard Weinberger:
 "Four fixes, all discovered by Trinity"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: segv: Save regs only in case of a kernel mode fault
  um: Fix hung task in fix_range_common()
  um: Ensure that a stub page cannot get unmapped
  Revert "um: Fix wait_stub_done() error handling"

Pull btrfs fixes from Chris Mason:
 "We have two more fixes in my for-linus branch.

  I was hoping to also include a fix for a btrfs deadlock with
  compression enabled, but we're still nailing that one down"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: test for valid bdev before kobj removal in btrfs_rm_device
  Btrfs: fix abnormal long waiting in fsync

Pull NFS client fixes from Trond Myklebust:
 "Apologies for the relative lateness of this pull request, however the
  commits fix some issues with the NFS read/write code updates in
  3.16-rc1 that can cause serious Oopsing when using small r/wsize.  The
  delay was mainly due to extra testing to make sure that the fixes
  behave correctly.

  Highlights include;
   - Stable fix for an NFSv3 posix ACL regression
   - Multiple fixes for regressions to the NFS generic read/write code:
     - Fix page splitting bugs that come into play when a small
       rsize/wsize read/write needs to be sent again (due to error
       conditions or page redirty)
     - Fix nfs_wb_page_cancel, which is called by the "invalidatepage"
       method
   - Fix 2 compile warnings about unused variables
   - Fix a performance issue affecting unstable writes"

* tag 'nfs-for-3.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Don't reset pg_moreio in __nfs_pageio_add_request
  NFS: Remove 2 unused variables
  nfs: handle multiple reqs in nfs_wb_page_cancel
  nfs: handle multiple reqs in nfs_page_async_flush
  nfs: change find_request to find_head_request
  nfs: nfs_page should take a ref on the head req
  nfs: mark nfs_page reqs with flag for extra ref
  nfs: only show Posix ACLs in listxattr if actually present

...otherwise me lose user mode regs and the resulting
stack trace is useless.

Signed-off-by: Richard Weinberger <richard@nod.at>

If do_ops() fails we have to release current->mm->mmap_sem
otherwise the failing task will never terminate.

Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Richard Weinberger <richard@nod.at>

Trinity discovered an execution path such that a task
can unmap his stub page.

Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Richard Weinberger <richard@nod.at>

This reverts commit 0974a9ca

.
The real for for that issue is to release current->mm->mmap_sem in
fix_range_common().

Signed-off-by: Richard Weinberger <richard@nod.at>

Merge tag 'exynos-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc

Merge "Samsung exynos cpuidle update for v3.17" from Kukjin Kim:

- add callbacks exynos_suspend() and exynos_powered_up()
  for support cpuidle through mcpm
- skip exynos_cpuidle for exynos5420 because is uses
  cpuidle-big-liggle generic cpuidle driver
- add generic functions to calculate cpu number is used
  for pmu and this is required for exynos5420 multi-cluster
- add of_device_id structure for big.LITTLE cpuidle and
  add "samsung,exynos5420" compatible string for exynos5420

* tag 'exynos-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

:
  ARM: EXYNOS: populate suspend and powered_up callbacks for mcpm
  ARM: EXYNOS: do not allow cpuidle registration for exynos5420
  cpuidle: big.LITTLE: init driver for exynos5420
  cpuidle: big.LITTLE: Add ARCH_EXYNOS entry in config
  ARM: EXYNOS: add generic function to calculate cpu number
  cpuidle: big.LITTLE: add of_device_id structure
  + Linux 3.16-rc5

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "ARM: mvebu SoC changes for v3.17 (round 2)" from Jason Cooper:

"Yeah, it's just one patch, but it's a beautiful one!  Thanks to the
efforts of many people over the last couple years, and in particular,
Andrew Lunn, Kirkwood has been completely converted to DT."

 - kirkwood
   * Remove mach-kirkwood/, It's fully supported in mach-mvebu/

* tag 'mvebu-soc-3.17-2' of git://git.infradead.org/linux-mvebu

:
  ARM: Kirkwood: Remove mach-kirkwood

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-core-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/soc

Merge "Allwinner core additions for 3.17" from Maxime Ripard:

Nothing very fancy here, only the introduction from the new Allwinner A23 SoC.

* tag 'sunxi-core-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux

:
  ARM: sunxi: select MFD_SUN6I_PRCM when sun8i arch support is enabled
  ARM: sunxi: Add earlyprintk support using R_UART (sun6i/sun8i)
  ARM: sunxi: Introduce Allwinner A23 support

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-soc-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

Merge "ARM: imx: SoC changes for 3.17" from Shawn Guo:

The i.MX SoC changes for 3.17:
 - Add devicetree support for i.MX1 and i.MX21 clock driver
 - Use CLOCKSOURCE_OF_DECLARE() to initialize timer for DT targets
 - Use of_clk_init() to initialize i.MX25 and i.MX27 clock driver in
   device tree boot
 - Remove i.MX1 camera support
 - Remove i.MX27 IP Camera and Lite-Kit board support
 - Add suspend and cpuidle support for i.mx6sx
 - Clean up unused clk_register_clkdev() lookups
 - Update imx-weim bus driver to support populating devices on a simple
   bus
 - Switch i.MX27 and i.MX6QDL clock driver to use macro for clock IDs
 - Make i.MX51 a DT only platform and clean up the non-DT support code
 - Support disabling supervisor protect via DT
 - Random defconfig updates

* tag 'imx-soc-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux

: (69 commits)
  ARM: imx: clk-vf610: fix FlexCAN clock gating
  ARM: i.MX: Use CLOCKSOURCE_OF_DECLARE() for DT targets
  ARM: i.MX53: globally disable supervisor protect
  ARM: i.MX: allow disabling supervisor protect via DT
  ARM: i.MX27 clk: Add 26 MHz oscillator circuit clock gate
  ARM: i.MX27 clk: Remove unused definitions
  ARM: i.MX27 clk: Introduce DT include for clock provider
  ARM: i.MX: Remove Freescale Logic Product Development i.MX27 Lite-Kit board support
  ARM: i.MX: Remove excess symbols ARCH_MX1, ARCH_MX25 and MACH_MX27
  ARM: i.MX: Remove i.MX1 camera support
  ARM: imx: use PTR_ERR_OR_ZERO
  bus: imx-weim: populate devices on a simple bus
  ARM: imx: build cpu_is_imx6sl function conditionally
  ARM: imx: imx6sx uses imx6q cpuidle code
  ARM: imx: drop PL310 errata 588369 and 727915
  ARM: imx_v6_v7_defconfig: add FSL_EDMA and PRINTK_TIME
  ARM: imx: clk-imx6sx: register SSI/SSI_IPG as shared gate clocks
  ARM: imx_v6_v7_defconfig: Enable flexcan driver for can support
  ARM: imx_v6_v7_defconfig: Enable STMPE gpio support
  ARM: imx: mark .dt_compat as const
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

commit 99994cde

 btrfs: dev delete should remove sysfs entry
added a btrfs_kobj_rm_device, which dereferences device->bdev...
right after we check whether device->bdev might be NULL.

I don't honestly know if it's possible to have a NULL device->bdev
here, but assuming that it is (given the test), we need to move
the kobject removal to be under that test.

(Coverity spotted this)

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Chris Mason <clm@fb.com>

xfstests generic/127 detected this problem.

With commit 7fc34a62

, now fsync will only flush
data within the passed range.  This is the cause of the above problem,
-- btrfs's fsync has a stage called 'sync log' which will wait for all the
ordered extents it've recorded to finish.

In xfstests/generic/127, with mixed operations such as truncate, fallocate,
punch hole, and mapwrite, we get some pre-allocated extents, and mapwrite will
mmap, and then msync.  And I find that msync will wait for quite a long time
(about 20s in my case), thanks to ftrace, it turns out that the previous
fallocate calls 'btrfs_wait_ordered_range()' to flush dirty pages, but as the
range of dirty pages may be larger than 'btrfs_wait_ordered_range()' wants,
there can be some ordered extents created but not getting corresponding pages
flushed, then they're left in memory until we fsync which runs into the
stage 'sync log', and fsync will just wait for the system writeback thread
to flush those pages and get ordered extents finished, so the latency is
inevitable.

This adds a flush similar to btrfs_start_ordered_extent() in
btrfs_wait_logged_extents() to fix that.

Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>

Pull locking fixes from Thomas Gleixner:
 "The locking department delivers:

   - A rather large and intrusive bundle of fixes to address serious
     performance regressions introduced by the new rwsem / mcs
     technology.  Simpler solutions have been discussed, but they would
     have been ugly bandaids with more risk than doing the right thing.

   - Make the rwsem spin on owner technology opt-in for architectures
     and enable it only on the known to work ones.

   - A few fixes to the lockdep userspace library"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem: Add CONFIG_RWSEM_SPIN_ON_OWNER
  locking/mutex: Disable optimistic spinning on some architectures
  locking/rwsem: Reduce the size of struct rw_semaphore
  locking/rwsem: Rename 'activity' to 'count'
  locking/spinlocks/mcs: Micro-optimize osq_unlock()
  locking/spinlocks/mcs: Introduce and use init macro and function for osq locks
  locking/spinlocks/mcs: Convert osq lock to atomic_t to reduce overhead
  locking/spinlocks/mcs: Rename optimistic_spin_queue() to optimistic_spin_node()
  locking/rwsem: Allow conservative optimistic spinning when readers have lock
  tools/liblockdep: Account for bitfield changes in lockdeps lock_acquire
  tools/liblockdep: Remove debug print left over from development
  tools/liblockdep: Fix comparison of a boolean value with a value of 2

Pull scheduler fix from Thomas Gleixner:
 "Prevent a possible divide by zero in the debugging code"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix possible divide by zero in avg_atom() calculation

Pull irq fixes from Thomas Gleixner:
 "Three patches addressing shortcomings in the ARM gic interrupt chip
  driver"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: gic: Fix core ID calculation when topology is read from DT
  irqchip: gic: Add binding probe for ARM GIC400
  irqchip: gic: Add support for cortex a7 compatible string

Pull timer fix from Thomas Gleixner:
 "A single fix for a long standing issue in the alarm timer subsystem,
  which was noticed recently when people finally started to use alarm
  timers for serious work"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Fix bug where relative alarm timers were treated as absolute