- Nov 15, 2014
-
-
Tomi Valkeinen authored
The clock nodes for DSS VIDEO1/2 and HDMI have wrong register addresses. This patch fixes the addresses so that they point to CM_CLKSEL_VIDEO1_PLL_SYS, CM_CLKSEL_VIDEO2_PLL_SYS and CM_CLKSEL_HDMI_PLL_SYS. Reported-by:
Somnath Mukherjee <somnath@ti.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
- Nov 12, 2014
-
-
Lokesh Vutla authored
OMAP wdt driver supports only ti,omap3-wdt compatible. In DRA7 dt wdt compatible property is defined as ti,omap4-wdt by mistake instead of ti,omap3-wdt. Correcting the typo. Fixes: 6e58b8f1 ("ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board") Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Johan Hovold authored
Remove unused function prototype that was left by commit 149c09d3 ("ARM: AM33xx: remove old clock data and link in new clock init code") which removed the definition. Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
- Nov 11, 2014
-
-
NeilBrown authored
These fields were added by: commit 9574f36f OMAP/serial: Add support for driving a GPIO as DTR. but not removed by commit 985bfd54 tty: serial: omap: remove some dead code which reverted most of that commit. Time to revert the rest. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Roger Quadros authored
OMAP3 and lower SoCs don't have the ELM module so this warning is annoying. Get rid of it. Reported-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
- Nov 07, 2014
-
-
Masanari Iida authored
This patch remove unnecessary KERN_INFO and KERN_ERR from omap_phy_internal.c. Add pr_fmt. Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
- Nov 06, 2014
-
-
Tony Lindgren authored
Omap4 and later have been booting in device tree only mode for quite some time now. This initcall is no longer needed. Note that omap3 uses a different driver omap_l3_smx, and the initcall for that one is still needed until omap3 boots in device tree only mode. Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
Looks like we're still missing the keypad map for EVM. Let's add it since we have the binding now available for the twl4030_keypad as otherwise we get the following errors during the boot: twl4030_keypad keypad.31: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad twl4030_keypad keypad.31: Failed to build keymap twl4030_keypad: probe of keypad.31 failed with error -2 Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
Looks like we're still missing the keypad map for LDP. Let's add it since we have the binding now available for the twl4030_keypad as otherwise we get the following errors during the boot: twl4030_keypad keypad.31: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad twl4030_keypad keypad.31: Failed to build keymap twl4030_keypad: probe of keypad.31 failed with error -2 Reported-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
Fix the following warning during the boot: mtd: partition "Filesystem" extends beyond the end of device "omap2-nand.0" -- size truncated to 0x6000000 Looks like I got the last partition size wrong while setting up the .dts file. Note that this does not affect the partition as the size has been getting truncated to the right size. Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
When booting omap3 in device tree mode, we're currently getting the following errors: omap_l3_smx omap_l3_smx.0: couldn't request debug irq omap_l3_smx: probe of omap_l3_smx.0 failed with error -22 This is because we don't have handling in the driver for the compatible property and instead assume platform data being passed. Note that this binding is already documented, and implemented for the related omap_l3_noc driver for omap4 and later. Looks like the binding somehow never got never implemented for this omap_l3_smx driver though. Let's also remove __exit_p to allow binding and unbinding of the driver while at it. Reported-by:
Pavel Machek <pavel@ucw.cz> Reported-by:
Russell King <rmk+kernel@arm.linux.org.uk> Acked-by:
Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
- Nov 03, 2014
-
-
Linus Torvalds authored
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD fixes from Brian Norris: "Three main MTD fixes for 3.18: - A regression from 3.16 which was noticed in 3.17. With the restructuring of the m25p80.c driver and the SPI NOR library framework, we omitted proper listing of the SPI device IDs. This means m25p80.c wouldn't auto-load (modprobe) properly when built as a module. For now, we duplicate the device IDs into both modules. - The OMAP / ELM modules were depending on an implicit link ordering. Use deferred probing so that the new link order (in 3.18-rc) can still allow for successful probing. - Fix suspend/resume support for LH28F640BF NOR flash" * tag 'for-linus-20141102' of git://git.infradead.org/linux-mtd: mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chips mtd: omap: fix mtd devices not showing up mtd: m25p80,spi-nor: Fix module aliases for m25p80 mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id mtd: m25p80: get rid of spi_get_device_id
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of six patches consisting of: - two MAINTAINER updates - two scsi-mq fixs for the old parallel interface (not every request is tagged and we need to set the right flags to populate the SPI tag message) - a fix for a memory leak in scatterlist traversal caused by a preallocation update in 3.17 - an ipv6 fix for cxgbi" [ The scatterlist fix also came in separately through the block layer tree ] * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: MAINTAINERS: ufs - remove self MAINTAINERS: change hpsa and cciss maintainer libcxgbi : support ipv6 address host_param scsi: set REQ_QUEUE for the blk-mq case Revert "block: all blk-mq requests are tagged" lib/scatterlist: fix memory leak with scsi-mq
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Nothing too astounding or major: radeon, i915, vmwgfx, armada and exynos. Biggest ones: - vmwgfx has one big locking regression fix - i915 has come displayport fixes - radeon has some stability and a memory alloc failure - armada and exynos have some vblank fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (24 commits) drm/exynos: correct connector->dpms field before resuming drm/exynos: enable vblank after DPMS on drm/exynos: init kms poll at the end of initialization drm/exynos: propagate plane initialization errors drm/exynos: vidi: fix build warning drm/exynos: remove explicit encoder/connector de-initialization drm/exynos: init vblank with real number of crtcs drm/vmwgfx: Filter out modes those cannot be supported by the current VRAM size. drm/vmwgfx: Fix hash key computation drm/vmwgfx: fix lock breakage drm/i915/dp: only use training pattern 3 on platforms that support it drm/radeon: remove some buggy dead code drm/i915: Ignore VBT backlight check on Macbook 2, 1 drm/radeon: remove invalid pci id drm/radeon: dpm fixes for asrock systems radeon: clean up coding style differences in radeon_get_bios() drm/radeon: Use drm_malloc_ab instead of kmalloc_array drm/radeon/dpm: disable ulv support on SI drm/i915: Fix GMBUSFREQ on vlv/chv drm/i915: Ignore long hpds on eDP ports ...
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: - add the new bpf syscall to ARM. - drop a redundant return statement in __iommu_alloc_remap() - fix a performance issue noticed by Thomas Petazzoni with kmap_atomic(). - fix an issue with the L2 cache OF parsing code which caused it to incorrectly print warnings on each boot, and make the warning text more consistent with the rest of the code * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8180/1: mm: implement no-highmem fast path in kmap_atomic_pfn() ARM: 8183/1: l2c: Improve l2c310_of_parse() error message ARM: 8181/1: Drop extra return statement ARM: 8182/1: l2c: Make l2x0_cache_size_of_parse() return 'int' ARM: enable bpf syscall
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "A small set of x86 fixes. The most serious is an SRCU lockdep fix. A bit late - needed some time to test the SRCU fix, which only came in on Friday" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: vmx: defer load of APIC access page address during reset KVM: nVMX: Disable preemption while reading from shadow VMCS KVM: x86: Fix far-jump to non-canonical check KVM: emulator: fix execution close to the segment limit KVM: emulator: fix error code for __linearize
-
Dave Airlie authored
Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes This pull-request includes some bug fixes and code cleanups. Especially, this fixes the bind failure issue occurred when it tries to re-bind Exynos drm driver after unbound, and the modetest failure issue incurred by not having a pair to vblank on and off requests. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: correct connector->dpms field before resuming drm/exynos: enable vblank after DPMS on drm/exynos: init kms poll at the end of initialization drm/exynos: propagate plane initialization errors drm/exynos: vidi: fix build warning drm/exynos: remove explicit encoder/connector de-initialization drm/exynos: init vblank with real number of crtcs
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull VFS fixes from Al Viro: "A bunch of assorted fixes, most of them followups to overlayfs merge" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ovl: initialize ->is_cursor Return short read or 0 at end of a raw device, not EIO isofs: don't bother with ->d_op for normal case isofs_cmp(): we'll never see a dentry for . or .. overlayfs: fix lockdep misannotation ovl: fix check for cursor overlayfs: barriers for opening upper-layer directory rcu: Provide counterpart to rcu_dereference() for non-RCU situations staging: android: logger: Fix log corruption regression
-
Linus Torvalds authored
The sk_prot is irda's own set of protocol handlers, so irda should statically know what that function is anyway, without using an indirect pointer. And as it happens, we know *exactly* what that pointer is statically: it's NULL, because irda doesn't define a disconnect operation. So calling that function is doubly wrong, and will just cause an oops. Reported-by:
Martin Lang <mlg.hessigheim@gmail.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: David Miller <davem@davemloft.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrzej Hajda authored
During system suspend after connector switch off its dpms field is set to connector previous dpms state. To properly resume dpms field should be set to its actual state (off) before resuming to previous dpms state. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
Before DPMS off driver disables vblank. It should be balanced by vblank enable after DPMS on. The patch fixes issue with page_flip ioctl not being able to acquire vblank counter introduced by patch: drm: Always reject drm_vblank_get() after drm_vblank_off() Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
HPD events can be generated by components even if drm_dev is not fully initialized, to skip such events kms poll initialization should be performed at the end of load callback followed directly by forced connection detection. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
In case of error during plane initialization load callback incorrectly return success, this patch fixes it. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Inki Dae authored
encoder object isn't used anymore so remove it. Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
All KMS objects are destroyed by drm_mode_config_cleanup in proper order so component drivers should not care about it. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
Initialization of vblank with MAX_CRTC caused attempts to disabling vblanks for non-existing crtcs in case drm used fewer crtcs. The patch fixes it. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
- Nov 02, 2014
-
-
Paolo Bonzini authored
Most call paths to vmx_vcpu_reset do not hold the SRCU lock. Defer loading the APIC access page to the next vmentry. This avoids the following lockdep splat: [ INFO: suspicious RCU usage. ] 3.18.0-rc2-test2+ #70 Not tainted ------------------------------- include/linux/kvm_host.h:474 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 1 lock held by qemu-system-x86/2371: #0: (&vcpu->mutex){+.+...}, at: [<ffffffffa037d800>] vcpu_load+0x20/0xd0 [kvm] stack backtrace: CPU: 4 PID: 2371 Comm: qemu-system-x86 Not tainted 3.18.0-rc2-test2+ #70 Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A12 01/10/2013 0000000000000001 ffff880209983ca8 ffffffff816f514f 0000000000000000 ffff8802099b8990 ffff880209983cd8 ffffffff810bd687 00000000000fee00 ffff880208a2c000 ffff880208a10000 ffff88020ef50040 ffff880209983d08 Call Trace: [<ffffffff816f514f>] dump_stack+0x4e/0x71 [<ffffffff810bd687>] lockdep_rcu_suspicious+0xe7/0x120 [<ffffffffa037d055>] gfn_to_memslot+0xd5/0xe0 [kvm] [<ffffffffa03807d3>] __gfn_to_pfn+0x33/0x60 [kvm] [<ffffffffa0380885>] gfn_to_page+0x25/0x90 [kvm] [<ffffffffa038aeec>] kvm_vcpu_reload_apic_access_page+0x3c/0x80 [kvm] [<ffffffffa08f0a9c>] vmx_vcpu_reset+0x20c/0x460 [kvm_intel] [<ffffffffa039ab8e>] kvm_vcpu_reset+0x15e/0x1b0 [kvm] [<ffffffffa039ac0c>] kvm_arch_vcpu_setup+0x2c/0x50 [kvm] [<ffffffffa037f7e0>] kvm_vm_ioctl+0x1d0/0x780 [kvm] [<ffffffff810bc664>] ? __lock_is_held+0x54/0x80 [<ffffffff812231f0>] do_vfs_ioctl+0x300/0x520 [<ffffffff8122ee45>] ? __fget+0x5/0x250 [<ffffffff8122f0fa>] ? __fget_light+0x2a/0xe0 [<ffffffff81223491>] SyS_ioctl+0x81/0xa0 [<ffffffff816fed6d>] system_call_fastpath+0x16/0x1b Reported-by:
Takashi Iwai <tiwai@suse.de> Reported-by:
Alexei Starovoitov <alexei.starovoitov@gmail.com> Reviewed-by:
Wanpeng Li <wanpeng.li@linux.intel.com> Tested-by:
Wanpeng Li <wanpeng.li@linux.intel.com> Fixes: 38b99173 Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jan Kiszka authored
In order to access the shadow VMCS, we need to load it. At this point, vmx->loaded_vmcs->vmcs and the actually loaded one start to differ. If we now get preempted by Linux, vmx_vcpu_put and, on return, the vmx_vcpu_load will work against the wrong vmcs. That can cause copy_shadow_to_vmcs12 to corrupt the vmcs12 state. Fix the issue by disabling preemption during the copy operation. copy_vmcs12_to_shadow is safe from this issue as it is executed by vmx_vcpu_run when preemption is already disabled before vmentry. This bug is exposed by running Jailhouse within KVM on CPUs with shadow VMCS support. Jailhouse never expects an interrupt pending vmexit, but the bug can cause it if, after copy_shadow_to_vmcs12 is preempted, the active VMCS happens to have the virtual interrupt pending flag set in the CPU-based execution controls. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Nadav Amit authored
Commit d1442d85 ("KVM: x86: Handle errors when RIP is set during far jumps") introduced a bug that caused the fix to be incomplete. Due to incorrect evaluation, far jump to segment with L bit cleared (i.e., 32-bit segment) and RIP with any of the high bits set (i.e, RIP[63:32] != 0) set may not trigger #GP. As we know, this imposes a security problem. In addition, the condition for two warnings was incorrect. Fixes: d1442d85 Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> [Add #ifdef CONFIG_X86_64 to avoid complaints of undefined behavior. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
A critical 3.18 regression fix from Rob, (thanks!) A fix to avoid advertizing modes we can't support from Sinclair (welcome Sinclair!) and a fix for an incorrect hash key computation from me that is completely harmless, but can wait 'til the next merge window if necessary. (I can't really bother stable with this one). * 'vmwgfx-fixes-3.18' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Filter out modes those cannot be supported by the current VRAM size. drm/vmwgfx: Fix hash key computation drm/vmwgfx: fix lock breakage
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging fixes from Greg KH: "Here are some staging driver fixes for 3.18-rc3. Mostly iio and comedi driver fixes for issues reported by people. All of these have been in linux-next for a while with no reported issues" * tag 'staging-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: fix memory leak / bad pointer freeing for chanlist staging: comedi: Kconfig: fix config COMEDI_ADDI_APCI_3120 dependants staging: comedi: widen subdevice number argument in ioctl handlers staging: rtl8723au: Fix alignment of mac_addr for ether_addr_copy() usage drivers/staging/comedi/Kconfig: Let COMEDI_II_PCI20KC depend on HAS_IOMEM staging: comedi: (regression) channel list must be set for COMEDI_CMD ioctl iio: adc: mxs-lradc: Disable the clock on probe failure iio: st_sensors: Fix buffer copy staging:iio:ad5933: Drop "raw" from channel names staging:iio:ad5933: Fix NULL pointer deref when enabling buffer
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a bunch of USB fixes for 3.18-rc3. Mostly usb-serial device ids and gadget fixes for issues that have been reported. Full details are in the shortlog. All of these have been in linux-next for a while" * tag 'usb-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (42 commits) usb: chipidea: Fix oops when removing the ci_hdrc module usb: gadget: function: Fixed the return value on error path usb: dwc2: gadget: disable phy before turning off power regulators usb: gadget: function: Remove redundant usb_free_all_descriptors usb: dwc3: gadget: Properly initialize LINK TRB usb: dwc2: gadget: fix gadget unregistration in udc_stop() function usb: dwc2: Bits in bitfield should add up to 32 usb: dwc2: gadget: sparse warning of context imbalance usb: gadget: udc: core: fix kernel oops with soft-connect usb: musb: musb_dsps: fix NULL pointer in suspend usb: musb: dsps: start OTG timer on resume again usb: gadget: loopback: don't queue requests to bogus endpoints usb: ffs: fix regression when quirk_ep_out_aligned_size flag is set usb: gadget: f_fs: remove redundant ffs_data_get() usb: gadget: udc: USB_GADGET_XILINX should depend on HAS_DMA Revert "usb: dwc3: dwc3-omap: Disable/Enable only wrapper interrupts in prepare/complete" usb: gadget: composite: enable BESL support usb: musb: cppi41: restart hrtimer only if not yet done usb: dwc3: ep0: fix Data Phase for transfer sizes aligned to wMaxPacketSize usb: serial: ftdi_sio: add "bricked" FTDI device PID ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "Filipe is nailing down some problems with our skinny extent variation, and Dave's patch fixes endian problems in the new super block checks" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix race that makes btrfs_lookup_extent_info miss skinny extent items Btrfs: properly clean up btrfs_end_io_wq_cache Btrfs: fix invalid leaf slot access in btrfs_lookup_extent() btrfs: use macro accessors in superblock validation checks
-
- Nov 01, 2014
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: "A bunch of fixes for minor defects reported by Coverity, a few driver fixups and revert of i8042.nomux change so that we are once again enable active MUX mode if box claims to support it" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: i8042 - disable active multiplexing by default" Input: altera_ps2 - use correct type for irq return value Input: altera_ps2 - write to correct register when disabling interrupts Input: max77693-haptic - fix potential overflow Input: psmouse - remove unneeded check in psmouse_reconnect() Input: vsxxxaa - fix code dropping bytes from queue Input: ims-pcu - fix dead code in ims_pcu_ofn_reg_addr_store() Input: opencores-kbd - fix error handling Input: wm97xx - adapt parameters to tosa touchscreen. Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544 Input: stmpe-keypad - fix valid key line bitmask Input: soc_button_array - update calls to gpiod_get*()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management fixes from Rafael Wysocki: "These are fixes received after my previous pull request plus one that has been in the works for quite a while, but its previous version caused problems to happen, so it's been deferred till now. Fixed are two recent regressions (MFD enumeration and cpufreq-dt), ACPI EC regression introduced in 3.17, system suspend error code path regression introduced in 3.15, an older bug related to recovery from failing resume from hibernation and a cpufreq-dt driver issue related to operation performance points. Specifics: - Fix a crash on r8a7791/koelsch during resume from system suspend caused by a recent cpufreq-dt commit (Geert Uytterhoeven). - Fix an MFD enumeration problem introduced by a recent commit adding ACPI support to the MFD subsystem that exposed a weakness in the ACPI core causing ACPI enumeration to be applied to all devices associated with one ACPI companion object, although it should be used for one of them only (Mika Westerberg). - Fix an ACPI EC regression introduced during the 3.17 cycle causing some Samsung laptops to misbehave as a result of a workaround targeted at some Acer machines. That includes a revert of a commit that went too far and a quirk for the Acer machines in question. From Lv Zheng. - Fix a regression in the system suspend error code path introduced during the 3.15 cycle that causes it to fail to take errors from asychronous execution of "late" suspend callbacks into account (Imre Deak). - Fix a long-standing bug in the hibernation resume error code path that fails to roll back everything correcty on "freeze" callback errors and leaves some devices in a "suspended" state causing more breakage to happen subsequently (Imre Deak). - Make the cpufreq-dt driver disable operation performance points that are not supported by the VR connected to the CPU voltage plane with acceptable tolerance instead of constantly failing voltage scaling later on (Lucas Stach)" * tag 'pm+acpi-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / EC: Fix regression due to conflicting firmware behavior between Samsung and Acer. Revert "ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC" cpufreq: cpufreq-dt: Restore default cpumask_setall(policy->cpus) PM / Sleep: fix recovery during resuming from hibernation PM / Sleep: fix async suspend_late/freeze_late error handling ACPI: Use ACPI companion to match only the first physical device cpufreq: cpufreq-dt: disable unsupported OPPs
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: "These changes, intended for v3.18, fix: Sysfs - Fix "enable" filename change (Greg Kroah-Hartman) An unintentional sysfs filename change in commit 5136b2da ("PCI: convert bus code to use dev_groups"), which appeared in v3.13, changed "enable" to "enabled", and this changes it back. Old users of "enable" are currently broken and will be helped by this change. Anything that started to use "enabled" after v3.13 will be broken by this change. If necessary, we can add a symlink to make both work, but this patch doesn't do that. PCI device hotplug - Revert duplicate merge (Kamal Mostafa) A mistaken duplicate merge that added a check twice. Nothing's broken; this just removes the unnecessary code. Freescale i.MX6 - Wait for clocks to stabilize after ref_en (Richard Zhu) An i.MX6 clock problem that prevents mx6 nitrogen boards from booting" * tag 'pci-v3.18-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Rename sysfs 'enabled' file back to 'enable' PCI: imx6: Wait for clocks to stabilize after ref_en Revert duplicate "PCI: pciehp: Prevent NULL dereference during probe"
-
Andy Lutomirski authored
Rusty noticed a Really Bad Bug (tm) in my NT fix. The entry code reads out of bounds, causing the NT fix to be unreliable. But, and this is much, much worse, if your stack is somehow just below the top of the direct map (or a hole), you read out of bounds and crash. Excerpt from the crash: [ 1.129513] RSP: 0018:ffff88001da4bf88 EFLAGS: 00010296 2b:* f7 84 24 90 00 00 00 testl $0x4000,0x90(%rsp) That read is deterministically above the top of the stack. I thought I even single-stepped through this code when I wrote it to check the offset, but I clearly screwed it up. Fixes: 8c7aa698 ("x86_64, entry: Filter RFLAGS.NT on entry from userspace") Reported-by:
Rusty Russell <rusty@ozlabs.org> Cc: stable@vger.kernel.org Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 bugfixes from Ted Ts'o: "A set of miscellaneous ext4 bug fixes for 3.18" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: make ext4_ext_convert_to_initialized() return proper number of blocks ext4: bail early when clearing inode journal flag fails ext4: bail out from make_indexed_dir() on first error jbd2: use a better hash function for the revoke table ext4: prevent bugon on race between write/fcntl ext4: remove extent status procfs files if journal load fails ext4: disallow changing journal_csum option during remount ext4: enable journal checksum when metadata checksum feature enabled ext4: fix oops when loading block bitmap failed ext4: fix overflow when updating superblock backups after resize
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull quota and ext3 fixes from Jan Kara. * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fs, jbd: use a more generic hash function quota: Properly return errors from dquot_writeback_dquots() ext3: Don't check quota format when there are no quota files
-