Since the commit mentioned below __xdp_reg_mem_model() can return a NULL
pointer. This pointer is dereferenced in trace_mem_connect() which leads
to segfault.

The trace points (mem_connect + mem_disconnect) were put in place to
pair connect/disconnect using the IDs. The ID is only assigned if
__xdp_reg_mem_model() does not return NULL. That connect trace point is
of no use if there is no ID.

Skip that connect trace point if xdp_alloc is NULL.

[ Toke Høiland-Jørgensen delivered the reasoning for skipping the trace
  point ]

Fixes: 4a48ef70

 ("xdp: Allow registering memory model without rxq reference")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/YikmmXsffE+QajTB@linutronix.de


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 5dbbbd01

 ("ice: Avoid RTNL lock when re-creating
auxiliary device") changes a process of re-creation of aux device
so ice_plug_aux_dev() is called from ice_service_task() context.
This unfortunately opens a race window that can result in dead-lock
when interface has left LAG and immediately enters LAG again.

Reproducer:
```
#!/bin/sh

ip link add lag0 type bond mode 1 miimon 100
ip link set lag0

for n in {1..10}; do
        echo Cycle: $n
        ip link set ens7f0 master lag0
        sleep 1
        ip link set ens7f0 nomaster
done
```

This results in:
[20976.208697] Workqueue: ice ice_service_task [ice]
[20976.213422] Call Trace:
[20976.215871]  __schedule+0x2d1/0x830
[20976.219364]  schedule+0x35/0xa0
[20976.222510]  schedule_preempt_disabled+0xa/0x10
[20976.227043]  __mutex_lock.isra.7+0x310/0x420
[20976.235071]  enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core]
[20976.251215]  ib_enum_roce_netdev+0xa4/0xe0 [ib_core]
[20976.256192]  ib_cache_setup_one+0x33/0xa0 [ib_core]
[20976.261079]  ib_register_device+0x40d/0x580 [ib_core]
[20976.266139]  irdma_ib_register_device+0x129/0x250 [irdma]
[20976.281409]  irdma_probe+0x2c1/0x360 [irdma]
[20976.285691]  auxiliary_bus_probe+0x45/0x70
[20976.289790]  really_probe+0x1f2/0x480
[20976.298509]  driver_probe_device+0x49/0xc0
[20976.302609]  bus_for_each_drv+0x79/0xc0
[20976.306448]  __device_attach+0xdc/0x160
[20976.310286]  bus_probe_device+0x9d/0xb0
[20976.314128]  device_add+0x43c/0x890
[20976.321287]  __auxiliary_device_add+0x43/0x60
[20976.325644]  ice_plug_aux_dev+0xb2/0x100 [ice]
[20976.330109]  ice_service_task+0xd0c/0xed0 [ice]
[20976.342591]  process_one_work+0x1a7/0x360
[20976.350536]  worker_thread+0x30/0x390
[20976.358128]  kthread+0x10a/0x120
[20976.365547]  ret_from_fork+0x1f/0x40
...
[20976.438030] task:ip              state:D stack:    0 pid:213658 ppid:213627 flags:0x00004084
[20976.446469] Call Trace:
[20976.448921]  __schedule+0x2d1/0x830
[20976.452414]  schedule+0x35/0xa0
[20976.455559]  schedule_preempt_disabled+0xa/0x10
[20976.460090]  __mutex_lock.isra.7+0x310/0x420
[20976.464364]  device_del+0x36/0x3c0
[20976.467772]  ice_unplug_aux_dev+0x1a/0x40 [ice]
[20976.472313]  ice_lag_event_handler+0x2a2/0x520 [ice]
[20976.477288]  notifier_call_chain+0x47/0x70
[20976.481386]  __netdev_upper_dev_link+0x18b/0x280
[20976.489845]  bond_enslave+0xe05/0x1790 [bonding]
[20976.494475]  do_setlink+0x336/0xf50
[20976.502517]  __rtnl_newlink+0x529/0x8b0
[20976.543441]  rtnl_newlink+0x43/0x60
[20976.546934]  rtnetlink_rcv_msg+0x2b1/0x360
[20976.559238]  netlink_rcv_skb+0x4c/0x120
[20976.563079]  netlink_unicast+0x196/0x230
[20976.567005]  netlink_sendmsg+0x204/0x3d0
[20976.570930]  sock_sendmsg+0x4c/0x50
[20976.574423]  ____sys_sendmsg+0x1eb/0x250
[20976.586807]  ___sys_sendmsg+0x7c/0xc0
[20976.606353]  __sys_sendmsg+0x57/0xa0
[20976.609930]  do_syscall_64+0x5b/0x1a0
[20976.613598]  entry_SYSCALL_64_after_hwframe+0x65/0xca

1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev()
   is called from ice_service_task() context, aux device is created
   and associated device->lock is taken.
2. Command 'ip link ... set master...' calls ice's notifier under
   RTNL lock and that notifier calls ice_unplug_aux_dev(). That
   function tries to take aux device->lock but this is already taken
   by ice_plug_aux_dev() in step 1
3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already
   taken in step 2
4. Dead-lock

The patch fixes this issue by following changes:
- Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev()
  call in ice_service_task()
- The bit is checked in ice_clear_rdma_cap() and only if it is not set
  then ice_unplug_aux_dev() is called. If it is set (in other words
  plugging of aux device was requested and ice_plug_aux_dev() is
  potentially running) then the function only clears the bit
- Once ice_plug_aux_dev() call (in ice_service_task) is finished
  the bit ICE_FLAG_PLUG_AUX_DEV is cleared but it is also checked
  whether it was already cleared by ice_clear_rdma_cap(). If so then
  aux device is unplugged.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Co-developed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Dave Ertman <david.m.ertman@intel.com>
Link: https://lore.kernel.org/r/20220310171641.3863659-1-ivecera@redhat.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Sometimes the link comes up but no data flows. This patch fixes
this behavior. It's not clear what's the root cause of the issue.

According to the tests one other link-up issue remains.
In very rare cases the link isn't even reported as up.

Fixes: 84c8f773

 ("net: phy: meson-gxl: remove the use of .ack_callback()")
Tested-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/e3473452-a1f9-efcf-5fdd-02b6f44c3fcd@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Some of the bcmgenet platforms don't correctly support WOL, yet
ethtool returns:

"Supports Wake-on: gsf"

which is false.

Ideally if there isn't a wol_irq, or there is something else that
keeps the device from being able to wakeup it should display:

"Supports Wake-on: d"

This patch checks whether the device can wakup, before using the
hard-coded supported flags. This corrects the ethtool reporting, as
well as the WOL configuration because ethtool verifies that the mode
is supported before attempting it.

Fixes: c51de7f3

 ("net: bcmgenet: add Wake-on-LAN support code")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220310045535.224450-1-jeremy.linton@arm.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free
the "bus". But bus->name is still used in the next line, which will lead
to a use after free.

We can fix it by putting the name in a local variable and make the
bus->name point to the rodata section "name",then use the name in the
error message without referring to bus to avoid the uaf.

Fixes: 95b5fc03

 ("net: arc_emac: Make use of the helper function dev_err_probe()")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Link: https://lore.kernel.org/r/20220309121824.36529-1-niejianglei2021@163.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot reported a kernel infoleak [1] of 4 bytes.

After analysis, it turned out r->idiag_expires is not initialized
if inet_sctp_diag_fill() calls inet_diag_msg_common_fill()

Make sure to clear idiag_timer/idiag_retrans/idiag_expires
and let inet_diag_msg_sctpasoc_fill() fill them again if needed.

[1]

BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
 instrument_copy_to_user include/linux/instrumented.h:121 [inline]
 copyout lib/iov_iter.c:154 [inline]
 _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
 copy_to_iter include/linux/uio.h:162 [inline]
 simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
 __skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425
 skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
 skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline]
 netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 __sys_recvfrom+0x795/0xa10 net/socket.c:2097
 __do_sys_recvfrom net/socket.c:2115 [inline]
 __se_sys_recvfrom net/socket.c:2111 [inline]
 __x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:737 [inline]
 slab_alloc_node mm/slub.c:3247 [inline]
 __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1158 [inline]
 netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248
 __netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373
 netlink_dump_start include/linux/netlink.h:254 [inline]
 inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341
 sock_diag_rcv_msg+0x24a/0x620
 netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494
 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 sock_write_iter+0x594/0x690 net/socket.c:1061
 do_iter_readv_writev+0xa7f/0xc70
 do_iter_write+0x52c/0x1500 fs/read_write.c:851
 vfs_writev fs/read_write.c:924 [inline]
 do_writev+0x645/0xe00 fs/read_write.c:967
 __do_sys_writev fs/read_write.c:1040 [inline]
 __se_sys_writev fs/read_write.c:1037 [inline]
 __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Bytes 68-71 of 2508 are uninitialized
Memory access of size 2508 starts at ffff888114f9b000
Data copied to user address 00007f7fe09ff2e0

CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 8f840e47

 ("sctp: add the sctp_diag.c file")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20220310001145.297371-1-eric.dumazet@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The header file incorrectly referenced "median-independant interface"
instead of media. Correct this typo.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Fixes: 4069a572

 ("net: phy: Document core PHY structures")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220309062544.3073-1-colin.foster@in-advantage.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5 fixes 2022-03-09

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: SHAMPO, reduce TIR indication
  net/mlx5e: Lag, Only handle events from highest priority multipath entry
  net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
  net/mlx5: Fix a race on command flush flow
  net/mlx5: Fix size field in bufferx_reg struct
====================

Link: https://lore.kernel.org/r/20220309201517.589132-1-saeed@kernel.org


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MISR1 was cleared twice but the original author intention was probably
to clear MISR1 & MISR2 to completely disable interrupts. Fix it to
clear MISR2.

Fixes: 87461f7a

 ("net: phy: DP83822 initial driver submission")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220309142228.761153-1-clement.leger@bootlin.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.

Fixes: 7349a74e

 ("net: ethernet: gianfar_ethtool: get phc index through drvdata")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220310015313.14938-1-linmq006@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Guillaume Nault says:

====================
selftests: pmtu.sh: Fix cleanup of processes launched in subshell.

Depending on the options used, pmtu.sh may launch tcpdump and nettest
processes in the background. However it fails to clean them up after
the tests complete.

Patch 1 allows the cleanup() function to read the list of PIDs launched
by the tests.
Patch 2 fixes the way the nettest PIDs are retrieved.
====================

Link: https://lore.kernel.org/r/cover.1646776561.git.gnault@redhat.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When using "run_cmd <command> &", then "$!" refers to the PID of the
subshell used to run <command>, not the command itself. Therefore
nettest_pids actually doesn't contain the list of the nettest commands
running in the background. So cleanup() can't kill them and the nettest
processes run until completion (fortunately they have a 5s timeout).

Fix this by defining a new command for running processes in the
background, for which "$!" really refers to the PID of the command run.

Also, double quote variables on the modified lines, to avoid shellcheck
warnings.

Fixes: ece1278a

 ("selftests: net: add ESP-in-UDP PMTU test")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The cleanup() function takes care of killing processes launched by the
test functions. It relies on variables like ${tcpdump_pids} to get the
relevant PIDs. But tests are run in their own subshell, so updated
*_pids values are invisible to other shells. Therefore cleanup() never
sees any process to kill:

$ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception
TEST: ipv4: PMTU exceptions                                         [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects                       [ OK ]

$ pgrep -af tcpdump
6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap

Fix this by running cleanup() in the context of the test subshell.
Now that each test cleans the environment after completion, there's no
need for calling cleanup() again when the next test starts. So let's
drop it from the setup() function. This is okay because cleanup() is
also called when pmtu.sh starts, so even the first test starts in a
clean environment.

Also, use tcpdump's immediate mode. Otherwise it might not have time to
process buffered packets, resulting in missing packets or even empty
pcap files for short tests.

Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can
still inspect the test environment upon failure when using -p.

Fixes: a92a0a7b

 ("selftests: pmtu: Simplify cleanup and namespace names")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Syzbot reported UAF in port100_send_complete(). The root case is in
missing usb_kill_urb() calls on error handling path of ->probe function.

port100_send_complete() accesses devm allocated memory which will be
freed on probe failure. We should kill this urbs before returning an
error from probe function to prevent reported use-after-free

Fail log:

BUG: KASAN: use-after-free in port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935
Read of size 1 at addr ffff88801bb59540 by task ksoftirqd/2/26
...
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255
 __kasan_report mm/kasan/report.c:442 [inline]
 kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
 port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935
 __usb_hcd_giveback_urb+0x2b0/0x5c0 drivers/usb/core/hcd.c:1670

...

Allocated by task 1255:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track mm/kasan/common.c:45 [inline]
 set_alloc_info mm/kasan/common.c:436 [inline]
 ____kasan_kmalloc mm/kasan/common.c:515 [inline]
 ____kasan_kmalloc mm/kasan/common.c:474 [inline]
 __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524
 alloc_dr drivers/base/devres.c:116 [inline]
 devm_kmalloc+0x96/0x1d0 drivers/base/devres.c:823
 devm_kzalloc include/linux/device.h:209 [inline]
 port100_probe+0x8a/0x1320 drivers/nfc/port100.c:1502

Freed by task 1255:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track+0x21/0x30 mm/kasan/common.c:45
 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
 ____kasan_slab_free mm/kasan/common.c:366 [inline]
 ____kasan_slab_free+0xff/0x140 mm/kasan/common.c:328
 kasan_slab_free include/linux/kasan.h:236 [inline]
 __cache_free mm/slab.c:3437 [inline]
 kfree+0xf8/0x2b0 mm/slab.c:3794
 release_nodes+0x112/0x1a0 drivers/base/devres.c:501
 devres_release_all+0x114/0x190 drivers/base/devres.c:530
 really_probe+0x626/0xcc0 drivers/base/dd.c:670

Reported-and-tested-by:  <syzbot+16bcb127fb73baeecb14@syzkaller.appspotmail.com>
Fixes: 0347a6ab

 ("NFC: port100: Commands mechanism implementation")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220308185007.6987-1-paskripkin@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

SHAMPO is an RQ / WQ feature, an indication was added to the TIR in the
first place to enforce suitability between connected TIR and RQ, this
enforcement does not exist in current the Firmware implementation and was
redundant in the first place.

Fixes: 83439f3c

 ("net/mlx5e: Add HW-GRO offload")
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

There could be multiple multipath entries but changing the port affinity
for each one doesn't make much sense and there should be a default one.
So only track the entry with lowest priority value.
The commit doesn't affect existing users with a single entry.

Fixes: 544fe7c2

 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Only prio 1 is supported for nic mode when there is no ignore flow level
support in firmware. But for switchdev mode, which supports fixed number
of statically pre-allocated prios, this restriction is not relevant so
it can be relaxed.

Fixes: d671e109

 ("net/mlx5: Fix tc max supported prio for nic mode")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Fix a refcount use after free warning due to a race on command entry.
Such race occurs when one of the commands releases its last refcount and
frees its index and entry while another process running command flush
flow takes refcount to this command entry. The process which handles
commands flush may see this command as needed to be flushed if the other
process released its refcount but didn't release the index yet. Fix it
by adding the needed spin lock.

It fixes the following warning trace:

refcount_t: addition on 0; use-after-free.
WARNING: CPU: 11 PID: 540311 at lib/refcount.c:25 refcount_warn_saturate+0x80/0xe0
...
RIP: 0010:refcount_warn_saturate+0x80/0xe0
...
Call Trace:
 <TASK>
 mlx5_cmd_trigger_completions+0x293/0x340 [mlx5_core]
 mlx5_cmd_flush+0x3a/0xf0 [mlx5_core]
 enter_error_state+0x44/0x80 [mlx5_core]
 mlx5_fw_fatal_reporter_err_work+0x37/0xe0 [mlx5_core]
 process_one_work+0x1be/0x390
 worker_thread+0x4d/0x3d0
 ? rescuer_thread+0x350/0x350
 kthread+0x141/0x160
 ? set_kthread_struct+0x40/0x40
 ret_from_fork+0x1f/0x30
 </TASK>

Fixes: 50b2412b

 ("net/mlx5: Avoid possible free of command entry while timeout comp handler")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

According to HW spec the field "size" should be 16 bits
in bufferx register.

Fixes: e281682b

 ("net/mlx5_core: HW data structs/types definitions cleanup")
Signed-off-by: Mohammad Kabat <mohammadkab@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Steffen Klassert says:

====================
pull request (net): ipsec 2022-03-09

1) Fix IPv6 PMTU discovery for xfrm interfaces.
   From Lina Wang.

2) Revert failing for policies and states that are
   configured with XFRMA_IF_ID 0. It broke a
   user configuration. From Kai Lueke.

3) Fix a possible buffer overflow in the ESP output path.

4) Fix ESP GSO for tunnel and BEET mode on inter address
   family tunnels.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

When two ax25 devices attempted to establish connection, the requester use ax25_create(),
ax25_bind() and ax25_connect() to initiate connection. The receiver use ax25_rcv() to
accept connection and use ax25_create_cb() in ax25_rcv() to create ax25_cb, but the
ax25_cb->sk is NULL. When the receiver is detaching, a NULL pointer dereference bug
caused by sock_hold(sk) in ax25_kill_by_device() will happen. The corresponding
fail log is shown below:

===============================================================
BUG: KASAN: null-ptr-deref in ax25_device_event+0xfd/0x290
Call Trace:
...
ax25_device_event+0xfd/0x290
raw_notifier_call_chain+0x5e/0x70
dev_close_many+0x174/0x220
unregister_netdevice_many+0x1f7/0xa60
unregister_netdevice_queue+0x12f/0x170
unregister_netdev+0x13/0x20
mkiss_close+0xcd/0x140
tty_ldisc_release+0xc0/0x220
tty_release_struct+0x17/0xa0
tty_release+0x62d/0x670
...

This patch add condition check in ax25_kill_by_device(). If s->sk is
NULL, it will goto if branch to kill device.

Fixes: 4e0f718d

 ("ax25: improve the incomplete fix to avoid UAF and NPD bugs")
Reported-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

This node pointer is returned by of_find_compatible_node() with
refcount incremented. Calling of_node_put() to aovid the refcount leak.

Fixes: 501ef306

 ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: b7370112

 ("lpc32xx: Added ethernet driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ)
for requesting IRQ's resources any more, as they can be not ready yet in
case of DT-booting.

platform_get_irq() instead is a recommended way for getting IRQ even if
it was not retrieved earlier.

It also makes code simpler because we're getting "int" value right away
and no conversion from resource to int is required.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: 8a2c9a5a

 ("net: ethernet: ti: cpts: rework initialization/deinitialization")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-03-08

This series contains updates to iavf, i40e, and ice drivers.

Michal ensures netdev features are properly updated to reflect VLAN
changes received from PF and adds an additional flag for MSI-X
reinitialization as further differentiation of reinitialization
operations is needed for iavf.

Jake stops disabling of VFs due to failed virtchannel responses for
i40e and ice driver.

Dave moves MTU event notification to the service task to prevent issues
with RTNL lock for ice.

Christophe Jaillet corrects an allocation to GFP_ATOMIC instead of
GFP_KERNEL for ice.

Jedrzej fixes the value for link speed comparison which was preventing
the requested value from being set for ice.
---
Note: This will conflict when merging with net-next. Resolution:

diff --cc drivers/net/ethernet/intel/ice/ice.h
index dc42ff92dbad,3121f9b04f59..000000000000
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@@ -484,10 -481,9 +484,11 @@@ enum ice_pf_flags
        ICE_FLAG_LEGACY_RX,
        ICE_FLAG_VF_TRUE_PROMISC_ENA,
        ICE_FLAG_MDD_AUTO_RESET_VF,
 +      ICE_FLAG_VF_VLAN_PRUNING,
        ICE_FLAG_LINK_LENIENT_MODE_ENA,
        ICE_FLAG_PLUG_AUX_DEV,
+       ICE_FLAG_MTU_CHANGED,
 +      ICE_FLAG_GNSS,                  /* GNSS successfully initialized */
        ICE_PF_FLAGS_NBITS              /* must be last */
  };
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

When receiving a state message, function tipc_link_validate_msg()
is called to validate its header portion. Then, its data portion
is validated before it can be accessed correctly. However, current
data sanity  check is done after the message header is accessed to
update some link variables.

This commit fixes this issue by moving the data sanity check to
the beginning of state message handling and right after the header
sanity check.

Fixes: 9aa422ad

 ("tipc: improve size validations for received domain records")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20220308021200.9245-1-tung.q.nguyen@dektech.com.au


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid the
refcount leak. As the remove function do.

Fixes: 5cdaaa12

 ("net: emaclite: adding MDIO and phy lib support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220308024751.2320-1-linmq006@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Change curr_link_speed advertised speed, due to
link_info.link_speed is not equal phy.curr_user_speed_req.
Without this patch it is impossible to set advertised
speed to same as link_speed.

Testing Hints: Try to set advertised speed
to 25G only with 25G default link (use ethtool -s 0x80000000)

Fixes: 48cb27f2

 ("ice: Implement handlers for ethtool PHY/link operations")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice_misc_intr() is an irq handler. It should not sleep.

Use GFP_ATOMIC instead of GFP_KERNEL when allocating some memory.

Fixes: 348048e7

 ("ice: Implement iidc operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

When a bonded interface is destroyed, .ndo_change_mtu can be called
during the tear-down process while the RTNL lock is held.  This is a
problem since the auxiliary driver linked to the LAN driver needs to be
notified of the MTU change, and this requires grabbing a device_lock on
the auxiliary_device's dev.  Currently this is being attempted in the
same execution context as the call to .ndo_change_mtu which is causing a
dead-lock.

Move the notification of the changed MTU to a separate execution context
(watchdog service task) and eliminate the "before" notification.

Fixes: 348048e7

 ("ice: Implement iidc operations")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Jonathan Toppins <jtoppins@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The ice_vc_send_msg_to_vf function has logic to detect "failure"
responses being sent to a VF. If a VF is sent more than
ICE_DFLT_NUM_INVAL_MSGS_ALLOWED then the VF is marked as disabled.
Almost identical logic also existed in the i40e driver.

This logic was added to the ice driver in commit 1071a835 ("ice:
Implement virtchnl commands for AVF support") which itself copied from
the i40e implementation in commit 5c3c48ac ("i40e: implement virtual
device interface").

Neither commit provides a proper explanation or justification of the
check. In fact, later commits to i40e changed the logic to allow
bypassing the check in some specific instances.

The "logic" for this seems to be that error responses somehow indicate a
malicious VF. This is not really true. The PF might be sending an error
for any number of reasons such as lack of resources, etc.

Additionally, this causes the PF to log an info message for every failed
VF response which may confuse users, and can spam the kernel log.

This behavior is not documented as part of any requirement for our
products and other operating system drivers such as the FreeBSD
implementation of our drivers do not include this type of check.

In fact, the change from dev_err to dev_info in i40e commit 18b7af57
("i40e: Lower some message levels") explains that these messages
typically don't actually indicate a real issue. It is quite likely that
a user who hits this in practice will be very confused as the VF will be
disabled without an obvious way to recover.

We already have robust malicious driver detection logic using actual
hardware detection mechanisms that detect and prevent invalid device
usage. Remove the logic since its not a documented requirement and the
behavior is not intuitive.

Fixes: 1071a835

 ("ice: Implement virtchnl commands for AVF support")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The i40e_vc_send_msg_to_vf_ex (and its wrapper i40e_vc_send_msg_to_vf)
function has logic to detect "failure" responses sent to the VF. If a VF
is sent more than I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED, then the VF is
marked as disabled. In either case, a dev_info message is printed
stating that a VF opcode failed.

This logic originates from the early implementation of VF support in
commit 5c3c48ac ("i40e: implement virtual device interface").

That commit did not go far enough. The "logic" for this behavior seems
to be that error responses somehow indicate a malicious VF. This is not
really true. The PF might be sending an error for any number of reasons
such as lacking resources, an unsupported operation, etc. This does not
indicate a malicious VF. We already have a separate robust malicious VF
detection which relies on hardware logic to detect and prevent a variety
of behaviors.

There is no justification for this behavior in the original
implementation. In fact, a later commit 18b7af57 ("i40e: Lower some
message levels") reduced the opcode failure message from a dev_err to a
dev_info. In addition, recent commit 01cbf508 ("i40e: Fix to not
show opcode msg on unsuccessful VF MAC change") changed the logic to
allow quieting it for expected failures.

That commit prevented this logic from kicking in for specific
circumstances. This change did not go far enough. The behavior is not
documented nor is it part of any requirement for our products. Other
operating systems such as the FreeBSD implementation of our driver do
not include this logic.

It is clear this check does not make sense, and causes problems which
led to ugly workarounds.

Fix this by just removing the entire logic and the need for the
i40e_vc_send_msg_to_vf_ex function.

Fixes: 01cbf508 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change")
Fixes: 5c3c48ac

 ("i40e: implement virtual device interface")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

In some cases overloaded flag IAVF_FLAG_REINIT_ITR_NEEDED
which should indicate that interrupts need to be completely
reinitialized during reset leads to RTNL deadlocks using ethtool -C
while a reset is in progress.
To fix, it was added a new flag IAVF_FLAG_REINIT_MSIX_NEEDED
used to trigger MSI-X reinit.
New combined setting is fixed adopt after VF reset.
This has been implemented by call reinit interrupt scheme
during VF reset.
Without this fix new combined setting has never been adopted.

Fixes: 209f2f9c

 ("iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 negotiation")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Modify netdev->features for vlan stripping based on virtual
channel messages received from the PF. Change is needed
to synchronize vlan strip status between PF sysfs and iavf ethtool.

Fixes: 5951a2b9

 ("iavf: Fix VLAN feature flags after VFR")
Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Discussing one of the tests in mt753x_phylink_validate() with Landen
Chao confirms that the "||" should be "&&". Fix this.

Fixes: c288575f

 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1nRCF0-00CiXD-7q@rmk-PC.armlinux.org.uk


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

According to Documentation/driver-api/usb/URB.rst when a device
is unplugged usb_submit_urb() returns -ENODEV.

This error code propagates all the way up to usbnet_read_cmd() and
usbnet_write_cmd() calls inside the smsc95xx.c driver during
Ethernet cable unplug, unbind or reboot.

This causes the following errors to be shown on reboot, for example:

ci_hdrc ci_hdrc.1: remove, state 1
usb usb2: USB disconnect, device number 1
usb 2-1: USB disconnect, device number 2
usb 2-1.1: USB disconnect, device number 3
smsc95xx 2-1.1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet
smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19
smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS
smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy
smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19
smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS
smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy
smsc95xx 2-1.1:1.0 eth1: hardware isn't capable of remote wakeup
usb 2-1.4: USB disconnect, device number 4
ci_hdrc ci_hdrc.1: USB bus 2 deregistered
ci_hdrc ci_hdrc.0: remove, state 4
usb usb1: USB disconnect, device number 1
ci_hdrc ci_hdrc.0: USB bus 1 deregistered
imx2-wdt 30280000.watchdog: Device shutdown: Expect reboot!
reboot: Restarting system

Ignore the -ENODEV errors inside __smsc95xx_mdio_read() and
__smsc95xx_phy_wait_not_busy() and do not print error messages
when -ENODEV is returned.

Fixes: a049a30f

 ("net: usb: Correct PHY handling of smsc95xx")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clang static analysis reports this issue
qed_sriov.c:4727:19: warning: Assigned value is
  garbage or undefined
  ivi->max_tx_rate = tx_rate ? tx_rate : link.speed;
                   ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

link is only sometimes set by the call to qed_iov_get_link()
qed_iov_get_link fails without setting link or returning
status.  So change the decl to return status.

Fixes: 73390ac9

 ("qed*: support ndo_get_vf_config")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The esp tunnel GSO handlers use skb_mac_gso_segment to
push the inner packet to the segmentation handlers.
However, skb_mac_gso_segment takes the Ethernet Protocol
ID from 'skb->protocol' which is wrong for inter address
family tunnels. We fix this by introducing a new
skb_eth_gso_segment function.

This function can be used if it is necessary to pass the
Ethernet Protocol ID directly to the segmentation handler.
First users of this function will be the esp4 and esp6
tunnel segmentation handlers.

Fixes: c35fe410

 ("xfrm: Add mode handlers for IPsec on layer 2")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

The xfrm{4,6}_beet_gso_segment() functions did not correctly set the
SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 gso types for the address family
tunneling case. Fix this by setting these gso types.

Fixes: 384a46ea ("esp4: add gso_segment for esp4 beet mode")
Fixes: 7f9e40eb

 ("esp6: add gso_segment for esp6 beet mode")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>