Add initial DTS file for Compute Module 4.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

The BRCM PCIe block has controls to enable control of the CLKREQ#
signal by the L1SS, and to gate the refclk with the CLKREQ# input.
These controls are mutually exclusive - the upstream code sets the
latter, but some use cases require the former.

Add a Device Tree property - brcm,enable-l1ss - to switch to the
L1SS configuration.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

The CPU clock has had so far a bunch of quirks to expose the clock tree
properly, but since we reverted to exposing them through the MMIO driver,
we can remove that code from the firmware driver.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

We've registered the firmware clocks using their ID as name, but it's much
more convenient to register them using their proper name. Since the
firmware doesn't provide it, we have to duplicate it.

Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

The raspberrypi firmware clock driver has a min_rate / max_rate clamping by
storing the info it needs in a private structure.

However, the CCF already provides such a facility, so we can switch to it
to remove the boilerplate.

Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

While the firmware allows us to discover the available clocks, we need to
discriminate those clocks to only register the ones meaningful to Linux.
The firmware also doesn't provide a clock name, so having a list of the ID
will help us to give clocks a proper name later on.

Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

commit 22e21e51 upstream.

While preparing the driver for upstream this detail was missed.

If not asserted during the initialization process, devices connected on
the bus will not be made aware of the internal reset happening. This,
potentially resulting in unexpected behavior.

Link: https://lore.kernel.org/r/20200507172020.18000-1-nsaenzjulienne@suse.de
Fixes: c0452137

 ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>

commit f37d13d5

 upstream.

The variable ret is being initialized with a value that is never read
and it is being updated later with a new value. The initialization
is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200519154553.873413-1-colin.king@canonical.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e420637b upstream.

The problem is that we change "p_args" to point to the middle of the
string so when we free it at the end of the function it's not freeing
the same pointer that we originally allocated.

Fixes: e2c94d6f

 ("w1_therm: adding alarm sysfs entry")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200520120019.GA172354@mwanda


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 57c76221

 upstream.

Adding bulk read support:
Sending a 'trigger' command in the dedicated sysfs entry of bus master
device send a conversion command for all the slaves on the bus. The sysfs
entry is added as soon as at least one device supporting this feature
is detected on the bus.

The behavior of the sysfs reading temperature on the device is as follow:
 * If no bulk read pending, trigger a conversion on the device, wait for
 the conversion to be done, read the temperature in device RAM
 * If a bulk read has been trigger, access directly the device RAM
This behavior is the same on the 2 sysfs entries ('temperature' and
'w1_slave').

Reading the therm_bulk_read sysfs give the status of bulk operations:
 * '-1': conversion in progress on at least 1 sensor
 * '1': conversion complete but at least one sensor has not been read yet
 * '0': no bulk operation. Reading temperature on ecah device will trigger
a conversion

As not all devices support bulk read feature, it has been added in device
family structure.

The attribute is set at master level as soon as a supporting device is
discover. It is removed when the last supported device leave the bus.
The count of supported device is kept with the static counter
bulk_read_device_counter.

A strong pull up is apply on the line if at least one device required it.
The duration of the pull up is the max time required by a device on the
line, which depends on the resolution settings of each device. The strong
pull up could be adjust with the a module parameter.

Updating documentation in Documentation/ABI/testing/sysfs-driver-w1_therm
and Documentation/w1/slaves/w1_therm.rst accordingly.

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203820.411483-1-akira215corp@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e2c94d6f

 upstream.

Adding device alarms settings by a dedicated sysfs entry alarms (RW):
read or write TH and TL in the device RAM. Checking devices in alarm
state could be performed using the master search command.

As alarms temperature level are store in a 8 bit register on the device
and are signed values, a safe cast shall be performed using the min and
max temperature that device are able to measure. This is done by
int_to_short inline function.

A 'write_data' field is added in the device structure, to bind the
correct writing function, as some devices may have 2 or 3 bytes RAM.

Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly.

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203801.411253-1-akira215corp@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 67b392f7

 upstream.

Optimizing temperature reading by reducing waiting conversion time
according to device resolution settings, as per device specification.
This is device dependent as not all the devices supports resolution
setting, so it has been added in device family structures.

The process to read the temperature on the device has been adapted in a
new function 'convert_t()', which replace the former 'read_therm()', is
introduce to deal with this timing. Strong pull up is also applied during
the required time, according to device power status needs and
'strong_pullup' module parameter.

'temperature_from_RAM()' function is introduced to get the correct
temperature computation (device dependent) from device RAM data.

An new sysfs entry has been added to ouptut only temperature. The old
entry w1_slave has been kept for compatibility, without changing its
output format.

Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly.

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203742.411039-1-akira215corp@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 45d457a4

 upstream.

The driver implement 2 hardware functions to access device RAM:
 * copy_scratchpad
 * recall_scratchpad
They act according to device specifications.

As EEPROM operations are not device dependent (all w1_therm can perform
EEPROM read/write operation following the same protocol), it is removed
from device families structures.

Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly.

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203725.410844-1-akira215corp@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 308bdb94

 upstream.

Adding resolution sysfs entry (RW) to get or set the device resolution
Write values are managed as follow:
	* '9..12': resolution to set in bit
	* Anything else: do nothing
Read values are :
	* '9..12': device resolution in bit
	* '-xx': xx is kernel error when reading the resolution

Only supported devices will show the sysfs entry. A new family has been
created for DS18S20 devices as they do not implement resolution feature.

The resolution of each device is check when the device is
discover by the bus master, in 'w1_therm_add_slave(struct w1_slave *)'.
The status is stored in the device structure w1_therm_family_data so
that the driver always knows the resolution of each device, which could
be used later to determine the required conversion duration (resolution
dependent).

The resolution is re evaluate each time a user read or write the sysfs
entry.

To avoid looping through the w1_therm_families at run time, the pointer
'specific_functions' is set up to the correct 'w1_therm_family_converter'
when the slave is added (which mean when it is discovered by the master).
This initialization is done by a helper function
'device_family(struct w1_slave *sl)', and a dedicated macro
'SLAVE_SPECIFIC_FUNC(sl)' allow the access to the specific function of the
slave device.

'read_scratchpad' and 'write_scratchpad' are the hardware functions to
access the device RAM, as per protocol specification.

It cancel the former 'precision' functions, which was only set and never
read (so not stored in the device struct).

Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly.

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203708.410649-1-akira215corp@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b7bb6ca1

 upstream.

Adding ext_power sysfs entry (RO). Return the power status of the device:
 - 0: device parasite powered
 - 1: device externally powered
 - xx: xx is kernel error

The power status of each device is check when the device is
discover by the bus master, in 'w1_therm_add_slave(struct w1_slave *)'.
The status is stored in the device structure w1_therm_family_data so
that the driver always knows the power state of each device, which could
be used later to determine the required strong pull up to apply on the
line.

The power status is re evaluate each time the sysfs ext_power read by
a user.

The hardware function 'read_powermode(struct w1_slave *sl)' act just as
per device specifications, sending W1_READ_PSUPPLY command on the bus,
and issue a read time slot, reading only one bit.

A helper function 'bool bus_mutex_lock(struct mutex *lock)' is introduced.
It try to aquire the bus mutex several times (W1_THERM_MAX_TRY), waiting
W1_THERM_RETRY_DELAY between two attempt.

Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly.

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203650.410439-1-akira215corp@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c8ad65f6

 upstream.

Fix reset_select_slave issue during devices discovery by the master on
bus. The w1_reset_select_slave() from w1_io.c, which was previously used,
assume that if the slave count is 1 there is only one slave attached on
the bus. This is not always true. For example when discovering devices,
when the first device is discover by the bus master, its slave count is
1, but some other slaves may be on the bus.

In that case instead of adressing command to the attached slave the
master throw a SKIP ROM command so that all slaves attached on the bus
will answer simultenaously causing data collision.

A dedicated reset_select_slave() function is implemented here,
it always perform an adressing to each slave using the MATCH ROM
command.

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203610.409975-1-akira215corp@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 92b8d272

 upstream.

Adding code comments to split code in dedicated parts. After the global
declarations (defines, macros and function declarations), code is organized
as follow :
 - Device and family dependent structures and functions
 - Interfaces functions
 - Helpers functions
 - Hardware functions
 - Sysfs interface functions

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203535.409599-1-akira215corp@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

The i2c-gpio driver expects to use a GPIO in open-drain mode. Failure
to configure it in that way causes alarming warnings in the kernel log.
The BCM283x and BCM2711 GPIO blocks don't support open-drain mode, but
gpiolib can emulate it in software if configured correctly.

Silence the warning by declaring the GPIOs as requiring open-drain
mode, trusting gpiolib to manage the emulation. The previous
incarnation of this patch took the other approach of telling the
i2c-gpio driver that the GPIOs were configured for open-drain, but
this had the effect of disabling the emulation. In some cases this
appears to work, but examining the waveforms as analogue voltages
shows contention, the success or failure depending on drive strengths.

See: https://github.com/raspberrypi/firmware/issues/1381
See: https://github.com/raspberrypi/firmware/issues/1401



Signed-off-by: Phil Elwell <phil@raspberrypi.com>

This reverts commit 907e08e6.

Currently we call cec_phys_addr_invalidate on a hotplug deassert.
That may be due to a TV power cycling, or an AVR being switched
on (and switching edid). This makes CEC unusable.

Set it back up again on the hotplug assert.

Signed-off-by: Dom Cobley <popcornmix@gmail.com>

Commit "staging: vchiq_arm: Clean up 40-bit DMA support" failed to
change one of the calls to dma_unmap_sg to pass in g_dma_dev (rather
than g_dev). Correct that oversight.

See: https://github.com/raspberrypi/linux/issues/3647



Signed-off-by: Phil Elwell <phil@raspberrypi.com>

Allows use of the same alsa conf file for hdmi1

Signed-off-by: Dom Cobley <popcornmix@gmail.com>

Enable the MAX98357A driver.

See: https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=275919



Signed-off-by: Phil Elwell <phil@raspberrypi.com>

While the RV-1805 is supported by the rtc-abx80x driver via
auto-detection, in order for it to be initialized properly
it must be explcitly selected.

Signed-off-by: Kevin P. Fleming <kevin+linux@km6g.us>

The bytes per line numbers calculated by get_bytesperline was not
matching the equivalent calculation being performed by the VideoCore
(mostly by the calculate_pitch function there), resulting in failures
to set the image format with some image width values. This patches up
the RGB24 and YUYV type formats to match the VideoCore calculation.

Signed-off-by: David Plowman <david.plowman@raspberrypi.com>

Things don't work too well when both the vc4 driver and the firmware
driver are trying to control the same audio output:

[  763.569406] bcm2835_audio bcm2835_audio: vchi message timeout, msg=5

Hence, when the vc4 HDMI driver is used, let it control audio. This is done
by introducing a new device tree property to the audio node, and
extending the vc4-kms-v3d overlays to set it appropriately.

Signed-off-by: Hristo Venev <hristo@venev.name>

The abx80x implementation of the trickle-resistor-ohms parameter is
missing the ":0" indicating that the target is an integer/cell value.

See: https://github.com/raspberrypi/linux/issues/3642



Signed-off-by: Phil Elwell <phil@raspberrypi.com>

This fixes a gcc warning about misleading whitespace.

Signed-off-by: David Lechner <david@lechnology.com>

Signed-off-by: Bjorn <beikeland@gmail.com>

Raspberry Pi 1 Model B rev 1 uses GPIO1 for power-up instead of GPIO3.

KeyboardSignal and kb::kbrequest can be used to call /sbin/shutdown

The abx80x implementation of the trickle-resistor-ohms parameter is
missing the ":0" indicating that the target is an integer/cell value.

See: https://github.com/raspberrypi/linux/issues/3642



Signed-off-by: Phil Elwell <phil@raspberrypi.com>

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

To expose thermal regions as hwmon devices, the HWMON core has to be
built-in, so that THERMAL_HWMON can be enabled.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Since the unicam driver was modified to write to a dummy buffer when no
user-supplied buffer is available, it can now write to and return a
buffer even when there's only a single one. Enable this by changing the
min_buffers_needed in the vb2_queue; it will be useful for enabling
still captures without allocating more memory than absolutely necessary.

Signed-off-by: David Plowman <david.plowman@raspberrypi.com>