- Jun 04, 2019
-
-
Sameeh Jubran authored
This patch initially checks if CQ doorbell is needed before proceeding with the calculations. Signed-off-by:
Igor Chauskin <igorch@amazon.com> Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sameeh Jubran authored
Up until now the driver always used a single setting for the sizes of the different parts of the llq entry - 128 for entry size, 2 for descriptors before header and 96 for maximum header size. The current code makes sure that the parts of the llq entry are compatible with each other and with the initial llq entry size given by the device. This commit changes this code to support any llq entry size Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sameeh Jubran authored
Enable fallback to polling mode for Admin queue when identified a command response arrival without an accompanying MSI-X interrupt Signed-off-by:
Igor Chauskin <igorch@amazon.com> Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sameeh Jubran authored
Small cosmetic changes to ena.txt Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sameeh Jubran authored
Some pr_err prints lacked '\n' in the end. Added where missing. Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sameeh Jubran authored
Reverse christmas tree arrangement is when strings are written from longer to shorter with each line. Most of our functions are abiding this arrangement but this function does not. In this commit we arrange the variables of ena_probe() in reverse christmas tree. Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sameeh Jubran authored
struct ena_ring holds a union of free_rx_ids and free_tx_ids. Both of the above fields mean the exact same thing and are used exactly the same way. Furthermore, these fields are always used with a prefix of the type of ring. So for tx it will be tx_ring->free_tx_ids, and for rx it will be rx_ring->free_rx_ids, which shows how redundant the "_tx" and "_rx" parts are. Furthermore still, this may lead to confusing code like where tx_ring->free_rx_ids which works correctly but looks like a mess. This commit removes the aforementioned redundancy by replacing the free_rx/tx_ids union with a single free_ids field. It also changes a single goto label name from err_free_tx_ids: to err_tx_free_ids: for consistency with the above new notation. Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arthur Kiyanovski authored
This commit adds a mechanism for exposing different device properties via ethtool's priv_flags. The strings are provided by the device and copied to user space through the driver. In this commit we: Add commands, structs and defines necessary for handling extra properties Add functions for: Allocation/destruction of a buffer for extra properties strings. Retreival of extra properties strings and flags from the network device. Handle the allocation of a buffer for extra properties strings. * Initialize buffer with extra properties strings from the network device at driver startup. Use ethtool's get_priv_flags to expose extra properties of the ENA device Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sameeh Jubran authored
There is a maximum TX burst size that the ENA device can handle. It is exposed by the device to the driver and the driver needs to comply with it to avoid bugs. In this commit we: 1. Add ena_com_is_doorbell_needed(), which calculates the number of llq entries that will be used to hold a packet, and will return true if they exceed the number of allowed entries in a burst. If the function returns true, a doorbell needs to be invoked to send this packet in the next burst. 2. Follow the available entries in the current burst: - Every doorbell a new burst begins - With each write of an llq entry, the available entries in the current burst are decreased by 1. Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rasmus Villemoes authored
mv88e6xxx_g1_stats_wait has no users outside global1.c, so make it static. Signed-off-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rasmus Villemoes authored
The macros have an extraneous '800' (after 0180C2 there should be just six nibbles, with X representing one), while the comments have interchanged c2 and 80 and an extra :00. Signed-off-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jun 03, 2019
-
-
David Ahern authored
Add entry to MAINTAINERS file for new nexthop code. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: replace several function pointers with direct calls This series removes most function pointers from struct rtl8169_private and uses direct calls instead. This simplifies the code and avoids the penalty of indirect calls in times of retpoline. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Replace indirect call to tso_csum with direct calls. To do this we have to move rtl_chip_supports_csum_v2(). Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
The jumbo_ops are used in just one place, so we can simplify the code and avoid the penalty of indirect calls in times of retpoline. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
The mdio_ops are used in just one place, so we can simplify the code and avoid the penalty of indirect calls in times of retpoline. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Use helper skb_is_gso() and simplify access to tx_dropped. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
pci_device_to_OF_node(to_pci_dev(dev)) is the same as dev->of_node, so we can simplify the code. In addition add an empty line before the return statement. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Westphal says: ==================== net: add rcu annotations for ifa_list v3: fix typo in patch1 commit message All other patches are unchanged. v2: remove ifa_list iteration in afs instead of conversion Eric Dumazet reported following problem: It looks that unless RTNL is held, accessing ifa_list needs proper RCU protection. indev->ifa_list can be changed under us by another cpu (which owns RTNL) [..] A proper rcu_dereference() with an happy sparse support would require adding __rcu attribute. This patch series does that: add __rcu to the ifa_list pointers. That makes sparse complain, so the series also adds the required rcu_assign_pointer/dereference helpers where needed. All patches except the last one are preparation work. Two new macros are introduced for in_ifaddr walks. Last patch adds the __rcu annotations and the assign_pointer/dereference helper calls. This patch is a bit large, but I found no better way -- other approaches (annotate-first or add helpers-first) all result in mid-series sparse warnings. This series is submitted vs. net-next rather than net for several reasons: 1. Its (mostly) compile-tested only 2. 3rd patch changes behaviour wrt. secondary addresses (see changelog) 3. The problem exists for a very long time (2004), so it doesn't seem to be urgent to fix this -- rcu use to free ifa_list predates the git era. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
ifa_list is protected by rcu, yet code doesn't reflect this. Add the __rcu annotations and fix up all places that are now reported by sparse. I've done this in the same commit to not add intermediate patches that result in new warnings. Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
Like previous patches, use the new iterator macros to avoid sparse warnings once proper __rcu annotations are added. Compile tested only. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
Use in_dev_for_each_ifa_rcu/rtnl instead. This prevents sparse warnings once proper __rcu annotations are added. Signed-off-by:
Florian Westphal <fw@strlen.de> t di# Last commands done (6 commands done): Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
Netfilter hooks are always running under rcu read lock, use the new iterator macro so sparse won't complain once we add proper __rcu annotations. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
This also replaces spots that used for_primary_ifa(). for_primary_ifa() aborts the loop on the first secondary address seen. Replace it with either the rcu or rtnl variant of in_dev_for_each_ifa(), but two places will now also consider secondary addresses too: inet_addr_onlink() and inet_ifa_byprefix(). I do not understand why they should ignore secondary addresses. Why would a secondary address not be considered 'on link'? When matching a prefix, why ignore a matching secondary address? Other places get converted as well, but gain "->flags & SECONDARY" check. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
The ifa_list is protected either by rcu or rtnl lock, but the current iterators do not account for this. This adds two iterators as replacement, a later patch in the series will update them with the needed rcu/rtnl_dereference calls. Its not done in this patch yet to avoid sparse warnings -- the fields lack the proper __rcu annotation. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
David Howells says: I'm told that there's not really any point populating the list. Current OpenAFS ignores it, as does AuriStor - and IBM AFS 3.6 will do the right thing. The list is actually useless as it's the client's view of the world, not the servers, so if there's any NAT in the way its contents are invalid. Further, it doesn't support IPv6 addresses. On that basis, feel free to make it an empty list and remove all the interface enumeration. V1 of this patch reworked the function to use a new helper for the ifa_list iteration to avoid sparse warnings once the proper __rcu annotations get added in struct in_device later. But, in light of the above, just remove afs_get_ipv4_interfaces. Compile tested only. Cc: David Howells <dhowells@redhat.com> Cc: linux-afs@lists.infradead.org Signed-off-by:
Florian Westphal <fw@strlen.de> Tested-by:
David Howells <dhowells@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The variable rc is assigned with a value that is never read and it is re-assigned a new value later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playgroundDavid S. Miller authored
Arnd Bergmann says: ==================== isdn: deprecate non-mISDN drivers When isdn4linux came up in the context of another patch series, I remembered that we had discussed removing it a while ago. It turns out that the suggestion from Karsten Keil wa to remove I4L in 2018 after the last public ISDN networks are shut down. This has happened now (with a very small number of exceptions), so I guess it's time to try again. We currently have three ISDN stacks in the kernel: the original isdn4linux (with the hisax driver), the newer CAPI (with four drivers), and finally the mISDN stack (supporting roughly the same hardware as hisax). As far as I can tell, anyone using ISDN with mainline kernel drivers in the past few years uses mISDN, and this is typically used for voice-only PBX installations that don't require a public network. The older stacks support additional features for data networks, but those typically make no sense any more if there is no network to connect to. My proposal for this time is to kill off isdn4linux entirely, as it seems to have been unusable for quite a while. This code has been abandoned for many years and it does cause problems for treewide maintenance as it tends to do everything that we try to stop doing. Birger Harzenetter mentioned that is is still using i4l in order to make use of the 'divert' feature that is not part of mISDN, but has otherwise moved on to mISDN for normal operation, like apparently everyone else. CAPI in turn is not quite as obsolete, but two of the drivers (avm and hysdn) don't seem to be used at all, while another one (gigaset) will stop being maintained as Paul Bolle is no longer able to test it after the network gets shut down in September. All three are now moved into drivers/staging to let others speak up in case there are remaining users. This leaves Bluetooth CMTP as the only remaining user of CAPI, but Marcel Holtmann wishes to keep maintaining it. For the discussion on version 1, see [2] Unfortunately, Karsten Keil as the maintainer has not participated in the discussion. Arnd [1] https://patchwork.kernel.org/patch/8484861/#17900371 [2] https://listserv.isdn4linux.de/pipermail/isdn4linux/2019-April/thread.html ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Horatiu Vultur says: ==================== Add hw offload of TC flower on MSCC Ocelot This patch series enables hardware offload for flower filter used in traffic controller on MSCC Ocelot board. v2->v3 changes: - remove the check for shared blocks v1->v2 changes: - when declaring variables use reverse christmas tree ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Horatiu Vultur authored
Hardware offload of port filtering are now supported via tc command using flower filter. ACL rules are used to enable the hardware offload. The following keys are supported: vlan_id vlan_prio dst_mac/src_mac for non IP frames dst_ip/src_ip dst_port/src_port The following actions are supported: trap drop These filters are supported only on the ingress schedulare. Add: tc qdisc add dev eth3 ingress tc filter ad dev eth3 parent ffff: ip_proto ip flower \ ip_proto tcp dst_port 80 action drop Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Horatiu Vultur authored
Add ACL support using the TCAM. Using ACL it is possible to create rules in hardware to filter/redirect frames. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add functional test cases for nexthop objects. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jun 02, 2019
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset container Netfilter/IPVS update for net-next: 1) Add UDP tunnel support for ICMP errors in IPVS. Julian Anastasov says: This patchset is a followup to the commit that adds UDP/GUE tunnel: "ipvs: allow tunneling with gue encapsulation". What we do is to put tunnel real servers in hash table (patch 1), add function to lookup tunnels (patch 2) and use it to strip the embedded tunnel headers from ICMP errors (patch 3). 2) Extend xt_owner to match for supplementary groups, from Lukasz Pawelczyk. 3) Remove unused oif field in flow_offload_tuple object, from Taehee Yoo. 4) Release basechain counters from workqueue to skip synchronize_rcu() call. From Florian Westphal. 5) Replace skb_make_writable() by skb_ensure_writable(). Patchset from Florian Westphal. 6) Checksum support for gue encapsulation in IPVS, from Jacky Hu. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jun 01, 2019
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-05-31 The following pull-request contains BPF updates for your *net-next* tree. Lots of exciting new features in the first PR of this developement cycle! The main changes are: 1) misc verifier improvements, from Alexei. 2) bpftool can now convert btf to valid C, from Andrii. 3) verifier can insert explicit ZEXT insn when requested by 32-bit JITs. This feature greatly improves BPF speed on 32-bit architectures. From Jiong. 4) cgroups will now auto-detach bpf programs. This fixes issue of thousands bpf programs got stuck in dying cgroups. From Roman. 5) new bpf_send_signal() helper, from Yonghong. 6) cgroup inet skb programs can signal CN to the stack, from Lawrence. 7) miscellaneous cleanups, from many developers. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alan Maguire authored
xdping allows us to get latency estimates from XDP. Output looks like this: ./xdping -I eth4 192.168.55.8 Setting up XDP for eth4, please wait... XDP setup disrupts network connectivity, hit Ctrl+C to quit Normal ping RTT data [Ignore final RTT; it is distorted by XDP using the reply] PING 192.168.55.8 (192.168.55.8) from 192.168.55.7 eth4: 56(84) bytes of data. 64 bytes from 192.168.55.8: icmp_seq=1 ttl=64 time=0.302 ms 64 bytes from 192.168.55.8: icmp_seq=2 ttl=64 time=0.208 ms 64 bytes from 192.168.55.8: icmp_seq=3 ttl=64 time=0.163 ms 64 bytes from 192.168.55.8: icmp_seq=8 ttl=64 time=0.275 ms 4 packets transmitted, 4 received, 0% packet loss, time 3079ms rtt min/avg/max/mdev = 0.163/0.237/0.302/0.054 ms XDP RTT data: 64 bytes from 192.168.55.8: icmp_seq=5 ttl=64 time=0.02808 ms 64 bytes from 192.168.55.8: icmp_seq=6 ttl=64 time=0.02804 ms 64 bytes from 192.168.55.8: icmp_seq=7 ttl=64 time=0.02815 ms 64 bytes from 192.168.55.8: icmp_seq=8 ttl=64 time=0.02805 ms The xdping program loads the associated xdping_kern.o BPF program and attaches it to the specified interface. If run in client mode (the default), it will add a map entry keyed by the target IP address; this map will store RTT measurements, current sequence number etc. Finally in client mode the ping command is executed, and the xdping BPF program will use the last ICMP reply, reformulate it as an ICMP request with the next sequence number and XDP_TX it. After the reply to that request is received we can measure RTT and repeat until the desired number of measurements is made. This is why the sequence numbers in the normal ping are 1, 2, 3 and 8. We XDP_TX a modified version of ICMP reply 4 and keep doing this until we get the 4 replies we need; hence the networking stack only sees reply 8, where we have XDP_PASSed it upstream since we are done. In server mode (-s), xdping simply takes ICMP requests and replies to them in XDP rather than passing the request up to the networking stack. No map entry is required. xdping can be run in native XDP mode (the default, or specified via -N) or in skb mode (-S). A test program test_xdping.sh exercises some of these options. Note that native XDP does not seem to XDP_TX for veths, hence -N is not tested. Looking at the code, it looks like XDP_TX is supported so I'm not sure if that's expected. Running xdping in native mode for ixgbe as both client and server works fine. Changes since v4 - close fds on cleanup (Song Liu) Changes since v3 - fixed seq to be __be16 (Song Liu) - fixed fd checks in xdping.c (Song Liu) Changes since v2 - updated commit message to explain why seq number of last ICMP reply is 8 not 4 (Song Liu) - updated types of seq number, raddr and eliminated csum variable in xdpclient/xdpserver functions as it was not needed (Song Liu) - added XDPING_DEFAULT_COUNT definition and usage specification of default/max counts (Song Liu) Changes since v1 - moved from RFC to PATCH - removed unused variable in ipv4_csum() (Song Liu) - refactored ICMP checks into icmp_check() function called by client and server programs and reworked client and server programs due to lack of shared code (Song Liu) - added checks to ensure that SKB and native mode are not requested together (Song Liu) Signed-off-by:
Alan Maguire <alan.maguire@oracle.com> Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2019-05-31 This series contains updates to the iavf driver. Nathan Chancellor converts the use of gnu_printf to printf. Aleksandr modifies the driver to limit the number of RSS queues to the number of online CPUs in order to avoid creating misconfigured RSS queues. Gustavo A. R. Silva converts a couple of instances where sizeof() can be replaced with struct_size(). Alice makes the remaining changes to the iavf driver to cleanup all the old "i40evf" references in the driver to iavf, including the file names that still contained the old driver reference. There was no functional changes made, just cosmetic to reduce any confusion going forward now that the iavf driver is the virtual function driver for both i40e and ice drivers. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiong Wang authored
There has been quite a few progress around the two steps mentioned in the answer to the following question: Q: BPF 32-bit subregister requirements This patch updates the answer to reflect what has been done. v2: - Add missing full stop. (Song Liu) - Minor tweak on one sentence. (Song Liu) v1: - Integrated rephrase from Quentin and Jakub Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
Jiong Wang <jiong.wang@netronome.com> Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Alexei Starovoitov authored
Roman Gushchin says: ==================== During my work on memcg-based memory accounting for bpf maps I've done some cleanups and refactorings of the existing memlock rlimit-based code. It makes it more robust, unifies size to pages conversion, size checks and corresponding error codes. Also it adds coverage for cgroup local storage and socket local storage maps. It looks like some preliminary work on the mm side might be required to start working on the memcg-based accounting, so I'm sending these patches as a separate patchset. ==================== Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Roman Gushchin authored
Most bpf map types doing similar checks and bytes to pages conversion during memory allocation and charging. Let's unify these checks by moving them into bpf_map_charge_init(). Signed-off-by:
Roman Gushchin <guro@fb.com> Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Roman Gushchin authored
In order to unify the existing memlock charging code with the memcg-based memory accounting, which will be added later, let's rework the current scheme. Currently the following design is used: 1) .alloc() callback optionally checks if the allocation will likely succeed using bpf_map_precharge_memlock() 2) .alloc() performs actual allocations 3) .alloc() callback calculates map cost and sets map.memory.pages 4) map_create() calls bpf_map_init_memlock() which sets map.memory.user and performs actual charging; in case of failure the map is destroyed <map is in use> 1) bpf_map_free_deferred() calls bpf_map_release_memlock(), which performs uncharge and releases the user 2) .map_free() callback releases the memory The scheme can be simplified and made more robust: 1) .alloc() calculates map cost and calls bpf_map_charge_init() 2) bpf_map_charge_init() sets map.memory.user and performs actual charge 3) .alloc() performs actual allocations <map is in use> 1) .map_free() callback releases the memory 2) bpf_map_charge_finish() performs uncharge and releases the user The new scheme also allows to reuse bpf_map_charge_init()/finish() functions for memcg-based accounting. Because charges are performed before actual allocations and uncharges after freeing the memory, no bogus memory pressure can be created. In cases when the map structure is not available (e.g. it's not created yet, or is already destroyed), on-stack bpf_map_memory structure is used. The charge can be transferred with the bpf_map_charge_move() function. Signed-off-by:
Roman Gushchin <guro@fb.com> Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-