- Oct 19, 2021
-
-
Marc Kleine-Budde authored
When the a large chunk of data send and the receiver does not send a Flow Control frame back in time, the sendmsg() does not return a error code, but the number of bytes sent corresponding to the size of the packet. If a timeout occurs the isotp_tx_timer_handler() is fired, sets sk->sk_err and calls the sk->sk_error_report() function. It was wrongly expected that the error would be propagated to user space in every case. For isotp_sendmsg() blocking on wait_event_interruptible() this is not the case. This patch fixes the problem by checking if sk->sk_err is set and returning the error to user space. Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol") Link: https://github.com/hartkopp/can-isotp/issues/42 Link: https://github.com/hartkopp/can-isotp/pull/43 Link: https://lore.kernel.org/all/20210507091839.1366379-1-mkl@pengutronix.de Cc: stable@vger.kernel.org Reported-by:
Sottas Guillaume (LMB) <Guillaume.Sottas@liebherr.com> Tested-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Nathan Chancellor authored
A new warning in clang points out two places in this driver where boolean expressions are being used with a bitwise OR instead of a logical one: drivers/net/ethernet/netronome/nfp/nfp_asm.c:199:20: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical] reg->src_lmextn = swreg_lmextn(lreg) | swreg_lmextn(rreg); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/net/ethernet/netronome/nfp/nfp_asm.c:199:20: note: cast one or both operands to int to silence this warning drivers/net/ethernet/netronome/nfp/nfp_asm.c:280:20: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical] reg->src_lmextn = swreg_lmextn(lreg) | swreg_lmextn(rreg); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/net/ethernet/netronome/nfp/nfp_asm.c:280:20: note: cast one or both operands to int to silence this warning 2 errors generated. The motivation for the warning is that logical operations short circuit while bitwise operations do not. In this case, it does not seem like short circuiting is harmful so implement the suggested fix of changing to a logical operation to fix the warning. Link: https://github.com/ClangBuiltLinux/linux/issues/1479 Reported-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211018193101.2340261-1-nathan@kernel.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- Oct 18, 2021
-
-
Tianjia Zhang authored
Kernel TLS test has added SM4 GCM/CCM algorithm support, but SM4 algorithm is not compiled by default, this patch add SM4 config dependency. Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Reported-by:
kernel test robot <oliver.sang@intel.com> Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jeremy Kerr authored
We currently have some implicit padding in struct sockaddr_mctp. This patch makes this padding explicit, and ensures we have consistent layout on platforms with <32bit alignmnent. Fixes: 60fc6398 ("mctp: Add sockaddr_mctp to uapi") Signed-off-by:
Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jeremy Kerr authored
Use the more precise __kernel_sa_family_t for smctp_family, to match struct sockaddr. Also, use an unsigned int for the network member; negative networks don't make much sense. We're already using unsigned for mctp_dev and mctp_skb_cb, but need to change mctp_sock to suit. Fixes: 60fc6398 ("mctp: Add sockaddr_mctp to uapi") Signed-off-by:
Jeremy Kerr <jk@codeconstruct.com.au> Acked-by:
Eugene Syromiatnikov <esyr@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Zheyu Ma authored
During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wan Jiabing authored
Fix following coccicheck warning: ./drivers/net/ethernet/mscc/ocelot_vsc7514.c:946:1-33: WARNING: Function for_each_available_child_of_node should have of_node_put() before goto. Early exits from for_each_available_child_of_node should decrement the node reference counter. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wan Jiabing authored
Fix following coccicheck warning: ./drivers/net/ethernet/microchip/sparx5/s4parx5_main.c:723:1-33: WARNING: Function for_each_available_child_of_node should have of_node_put() before goto Early exits from for_each_available_child_of_node should decrement the node reference counter. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paul Blakey authored
First fragmented packets (frag offset = 0) byte len is zeroed when stolen by ip_defrag(). And since act_ct update the stats only afterwards (at end of execute), bytes aren't correctly accounted for such packets. To fix this, move stats update to start of action execute. Fixes: b57dc7c1 ("net/sched: Introduce action ct") Signed-off-by:
Paul Blakey <paulb@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
DENG Qingfang authored
Setting ds->num_ports to DSA_MAX_PORTS made DSA core allocate unnecessary dsa_port's and call mt7530_port_disable for non-existent ports. Set it to MT7530_NUM_PORTS to fix that, and dsa_is_user_port check in port_enable/disable is no longer required. Cc: stable@vger.kernel.org Signed-off-by:
DENG Qingfang <dqfext@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Aleksander Jan Bajkowski authored
I compared the register definitions with the D-Link DWR-966 GPL sources and found that the PUAFD field definition was incorrect. This definition is unused and causes no issues. Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Acked-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.15-20211017' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-10-17 this is a pull request of 11 patches for net/master. The first 4 patches are by Ziyang Xuan and Zhang Changzhong and fix 1 use after free and 3 standard conformance problems in the j1939 CAN stack. The next 2 patches are by Ziyang Xuan and fix 2 concurrency problems in the ISOTP CAN stack. Yoshihiro Shimoda's patch for the rcar_can fix suspend/resume on not running CAN interfaces. Aswath Govindraju's patch for the m_can driver fixes access for MMIO devices. Zheyu Ma contributes a patch for the peak_pci driver to fix a use after free. Stephane Grosjean's 2 patches fix CAN error state handling in the peak_usb driver. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
On i386, the baycom_epp driver wants to inspect X86 CPU features (TSC) and then act on that data, but that info is not available when running on UML, so prevent that test and do the default action. Prevents this build error on UML + i386: ../drivers/net/hamradio/baycom_epp.c: In function ‘epp_bh’: ../drivers/net/hamradio/baycom_epp.c:630:6: error: implicit declaration of function ‘boot_cpu_has’; did you mean ‘get_cpu_mask’? [-Werror=implicit-function-declaration] if (boot_cpu_has(X86_FEATURE_TSC)) \ ^ ../drivers/net/hamradio/baycom_epp.c:658:2: note: in expansion of macro ‘GETTICK’ GETTICK(time1); Fixes: 68f5d3f3 ("um: add PCI over virtio emulation driver") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: linux-um@lists.infradead.org Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Thomas Sailer <t.sailer@alumni.ethz.ch> Cc: linux-hams@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephane Grosjean authored
Since alloc_can_err_skb() puts NULL in cf in the case when skb cannot be allocated and can_change_state() handles the case when cf is NULL, the test on the nullity of skb is now unnecessary. Link: https://lore.kernel.org/all/20210929142111.55757-2-s.grosjean@peak-system.com Signed-off-by:
Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Stephane Grosjean authored
This corrects the lack of notification of a return to ERROR_ACTIVE state for USB - CANFD devices from PEAK-System. Fixes: 0a25e1f4 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Link: https://lore.kernel.org/all/20210929142111.55757-1-s.grosjean@peak-system.com Cc: stable@vger.kernel.org Signed-off-by:
Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Zheyu Ma authored
When remove the module peek_pci, referencing 'chan' again after releasing 'dev' will cause UAF. Fix this by releasing 'dev' later. The following log reveals it: [ 35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537 [ 35.965513 ] Call Trace: [ 35.965718 ] dump_stack_lvl+0xa8/0xd1 [ 35.966028 ] print_address_description+0x87/0x3b0 [ 35.966420 ] kasan_report+0x172/0x1c0 [ 35.966725 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967137 ] ? trace_irq_enable_rcuidle+0x10/0x170 [ 35.967529 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967945 ] __asan_report_load8_noabort+0x14/0x20 [ 35.968346 ] peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.968752 ] pci_device_remove+0xa9/0x250 Fixes: e6d9c80b ("can: peak_pci: add support of some new PEAK-System PCI cards") Link: https://lore.kernel.org/all/1634192913-15639-1-git-send-email-zheyuma97@gmail.com Cc: stable@vger.kernel.org Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Aswath Govindraju authored
The read and writes from the fifo are from a buffer, with various fields and data at predefined offsets. So, they should not be done to the same address(or port) in case of val_count greater than 1. Therefore, fix this by using iowrite32()/ioread32() instead of ioread32_rep()/iowrite32_rep(). Also, the write into FIFO must be performed with an offset from the message ram base address. Therefore, fix the base address to mram_base. Fixes: e3938177 ("can: m_can: Disable IRQs on FIFO bus errors") Link: https://lore.kernel.org/all/20210920123344.2320-1-a-govindraju@ti.com Signed-off-by:
Aswath Govindraju <a-govindraju@ti.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Yoshihiro Shimoda authored
If the driver was not opened, rcar_can_suspend() should not call clk_disable() because the clock was not enabled. Fixes: fd115931 ("can: add Renesas R-Car CAN driver") Link: https://lore.kernel.org/all/20210924075556.223685-1-yoshihiro.shimoda.uh@renesas.com Cc: stable@vger.kernel.org Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by:
Ayumi Nakamichi <ayumi.nakamichi.kf@renesas.com> Reviewed-by:
Ulrich Hecht <uli+renesas@fpond.eu> Tested-by:
Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
- Oct 17, 2021
-
-
Ziyang Xuan authored
When isotp_sendmsg() concurrent, tx.state of all TX processes can be ISOTP_IDLE. The conditions so->tx.state != ISOTP_IDLE and wq_has_sleeper(&so->wait) can not protect TX buffer from being accessed by multiple TX processes. We can use cmpxchg() to try to modify tx.state to ISOTP_SENDING firstly. If the modification of the previous process succeed, the later process must wait tx.state to ISOTP_IDLE firstly. Thus, we can ensure TX buffer is accessed by only one process at the same time. And we should also restore the original tx.state at the subsequent error processes. Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/c2517874fbdf4188585cf9ddf67a8fa74d5dbde5.1633764159.git.william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Ziyang Xuan authored
Using wait_event_interruptible() to wait for complete transmission, but do not check the result of wait_event_interruptible() which can be interrupted. It will result in TX buffer has multiple accessors and the later process interferes with the previous process. Following is one of the problems reported by syzbot. ============================================================= WARNING: CPU: 0 PID: 0 at net/can/isotp.c:840 isotp_tx_timer_handler+0x2e0/0x4c0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc7+ #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:isotp_tx_timer_handler+0x2e0/0x4c0 Call Trace: <IRQ> ? isotp_setsockopt+0x390/0x390 __hrtimer_run_queues+0xb8/0x610 hrtimer_run_softirq+0x91/0xd0 ? rcu_read_lock_sched_held+0x4d/0x80 __do_softirq+0xe8/0x553 irq_exit_rcu+0xf8/0x100 sysvec_apic_timer_interrupt+0x9e/0xc0 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 Add result check for wait_event_interruptible() in isotp_sendmsg() to avoid multiple accessers for tx buffer. Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/10ca695732c9dd267c76a3c30f37aefe1ff7e32f.1633764159.git.william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Reported-by:
<syzbot+78bab6958a614b0c80b9@syzkaller.appspotmail.com> Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Zhang Changzhong authored
The receiver should abort TP if 'total message size' in TP.CM_RTS and TP.CM_BAM is less than 9 or greater than 1785 [1], but currently the j1939 stack only checks the upper bound and the receiver will accept the following broadcast message: vcan1 18ECFF00 [8] 20 08 00 02 FF 00 23 01 vcan1 18EBFF00 [8] 01 00 00 00 00 00 00 00 vcan1 18EBFF00 [8] 02 00 FF FF FF FF FF FF This patch adds check for the lower bound and abort illegal TP. [1] SAE-J1939-82 A.3.4 Row 2 and A.3.6 Row 6. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/1634203601-3460-1-git-send-email-zhangchangzhong@huawei.com Cc: stable@vger.kernel.org Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Zhang Changzhong authored
According to SAE-J1939-21, the data length of TP.DT must be 8 bytes, so cancel session when receive unexpected TP.DT message. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/1632972800-45091-1-git-send-email-zhangchangzhong@huawei.com Cc: stable@vger.kernel.org Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Ziyang Xuan authored
It will trigger UAF for rx_kref of j1939_priv as following. cpu0 cpu1 j1939_sk_bind(socket0, ndev0, ...) j1939_netdev_start j1939_sk_bind(socket1, ndev0, ...) j1939_netdev_start j1939_priv_set j1939_priv_get_by_ndev_locked j1939_jsk_add ..... j1939_netdev_stop kref_put_lock(&priv->rx_kref, ...) kref_get(&priv->rx_kref, ...) REFCOUNT_WARN("addition on 0;...") ==================================================== refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 20874 at lib/refcount.c:25 refcount_warn_saturate+0x169/0x1e0 RIP: 0010:refcount_warn_saturate+0x169/0x1e0 Call Trace: j1939_netdev_start+0x68b/0x920 j1939_sk_bind+0x426/0xeb0 ? security_socket_bind+0x83/0xb0 The rx_kref's kref_get() and kref_put() should use j1939_netdev_lock to protect. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/20210926104757.2021540-1-william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Reported-by:
<syzbot+85d9878b19c94f9019ad@syzkaller.appspotmail.com> Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Ziyang Xuan authored
When the session state is J1939_SESSION_DONE, j1939_tp_rxtimer() will give an alert "rx timeout, send abort", but do nothing actually. Move the alert into session active judgment condition, it is more reasonable. One of the scenarios is that j1939_tp_rxtimer() execute followed by j1939_xtp_rx_abort_one(). After j1939_xtp_rx_abort_one(), the session state is J1939_SESSION_DONE, then j1939_tp_rxtimer() give an alert. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/20210906094219.95924-1-william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
- Oct 16, 2021
-
-
Nikolay Aleksandrov authored
When I added IGMPv3 support I decided to follow the RFC for computing the GMI dynamically: " 8.4. Group Membership Interval The Group Membership Interval is the amount of time that must pass before a multicast router decides there are no more members of a group or a particular source on a network. This value MUST be ((the Robustness Variable) times (the Query Interval)) plus (one Query Response Interval)." But that actually is inconsistent with how the bridge used to compute it for IGMPv2, where it was user-configurable that has a correct default value but it is up to user-space to maintain it. This would make it consistent with the other timer values which are also maintained correct by the user instead of being dynamically computed. It also changes back to the previous user-expected GMI behaviour for IGMPv3 queries which were supported before IGMPv3 was added. Note that to properly compute it dynamically we would need to add support for "Robustness Variable" which is currently missing. Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Fixes: 0436862e ("net: bridge: mcast: support for IGMPv3/MLDv2 ALLOW_NEW_SOURCES report") Signed-off-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefano Garzarella authored
In `test_no_sockets` we don't expect any sockets, indeed check_no_sockets() prints an error and exits if `sockets` list is not empty, so free_sock_stat() call is unnecessary since it would only be called when the `sockets` list is empty. This was discovered by a strange warning printed by gcc v11.2.1: In file included from ../../include/linux/list.h:7, from vsock_diag_test.c:18: vsock_diag_test.c: In function ‘test_no_sockets’: ../../include/linux/kernel.h:35:45: error: array subscript ‘struct vsock_stat[0]’ is partly outside array bound s of ‘struct list_head[1]’ [-Werror=array-bounds] 35 | const typeof(((type *)0)->member) * __mptr = (ptr); \ | ^~~~~~ ../../include/linux/list.h:352:9: note: in expansion of macro ‘container_of’ 352 | container_of(ptr, type, member) | ^~~~~~~~~~~~ ../../include/linux/list.h:393:9: note: in expansion of macro ‘list_entry’ 393 | list_entry((pos)->member.next, typeof(*(pos)), member) | ^~~~~~~~~~ ../../include/linux/list.h:522:21: note: in expansion of macro ‘list_next_entry’ 522 | n = list_next_entry(pos, member); \ | ^~~~~~~~~~~~~~~ vsock_diag_test.c:325:9: note: in expansion of macro ‘list_for_each_entry_safe’ 325 | list_for_each_entry_safe(st, next, sockets, list) { | ^~~~~~~~~~~~~~~~~~~~~~~~ In file included from vsock_diag_test.c:18: vsock_diag_test.c:333:19: note: while referencing ‘sockets’ 333 | LIST_HEAD(sockets); | ^~~~~~~ ../../include/linux/list.h:23:26: note: in definition of macro ‘LIST_HEAD’ 23 | struct list_head name = LIST_HEAD_INIT(name) It seems related to some compiler optimization and assumption about the empty `sockets` list, since this warning is printed only with -02 or -O3. Also removing `exit(1)` from check_no_sockets() makes the warning disappear since in that case free_sock_stat() can be reached also when the list is not empty. Reported-by:
Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20211014152045.173872-1-sgarzare@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-10-14 Brett ensures RDMA nodes are removed during release and rebuild. He also corrects fw.mgmt.api to include the patch number for proper identification. Dave stops ida_free() being called when an IDA has not been allocated. Michal corrects the order of parameters being provided and the number of entries skipped for UDP tunnels. ==================== Link: https://lore.kernel.org/r/20211014181953.3538330-1-anthony.l.nguyen@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Stephen Suryaputra authored
Commit bdb7cc64 ("ipv6: Count interface receive statistics on the ingress netdev") does not work when ip6_forward() executes on the skbs with vrf-enslaved netdev. Use IP6CB(skb)->iif to get to the right one. Add a selftest script to verify. Fixes: bdb7cc64 ("ipv6: Count interface receive statistics on the ingress netdev") Signed-off-by:
Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20211014130845.410602-1-ssuryaextr@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- Oct 15, 2021
-
-
David S. Miller authored
Leonard Crestez says: ==================== tcp: md5: Fix overlap between vrf and non-vrf keys With net.ipv4.tcp_l3mdev_accept=1 it is possible for a listen socket to accept connection from the same client address in different VRFs. It is also possible to set different MD5 keys for these clients which differ only in the tcpm_l3index field. This appears to work when distinguishing between different VRFs but not between non-VRF and VRF connections. In particular: * tcp_md5_do_lookup_exact will match a non-vrf key against a vrf key. This means that adding a key with l3index != 0 after a key with l3index == 0 will cause the earlier key to be deleted. Both keys can be present if the non-vrf key is added later. * _tcp_md5_do_lookup can match a non-vrf key before a vrf key. This casues failures if the passwords differ. This can be fixed by making tcp_md5_do_lookup_exact perform an actual exact comparison on l3index and by making __tcp_md5_do_lookup perfer vrf-bound keys above other considerations like prefixlen. The fact that keys with l3index==0 affect VRF connections is usually not desirable, VRFs are meant to be completely independent. This behavior needs to preserved for backwards compatibility. Also, applications can just bind listen sockets to VRF and never specify TCP_MD5SIG_FLAG_IFINDEX at all. So far the combination of TCP_MD5SIG_FLAG_IFINDEX with tcpm_ifindex == 0 was an error, accept this to mean "key only applies to default VRF". This is what applications using VRFs for traffic separation want. This also contains tests for the second part. It does not contain tests for overlapping keys, that would require more changes in nettest to add multiple keys. These scenarios are also covered by my tests for TCP-AO, especially around this area: https://github.com/cdleonard/tcp-authopt-test/blob/main/tcp_authopt_test/test_vrf_bind.py Changes since V2: * Rename --do-bind-key-ifindex to --force-bind-key-ifindex * Fix referencing TCP_MD5SIG_FLAG_IFINDEX as TCP_MD5SIG_IFINDEX Link to v2: https://lore.kernel.org/netdev/cover.1634107317.git.cdleonard@gmail.com/ Changes since V1: * Accept (TCP_MD5SIG_IFINDEX with tcpm_ifindex == 0) * Add flags for explicitly including or excluding TCP_MD5SIG_FLAG_IFINDEX to nettest * Add few more tests in fcnal-test.sh. Link to v1: https://lore.kernel.org/netdev/3d8387d499f053dba5cd9184c0f7b8445c4470c6.1633542093.git.cdleonard@gmail.com/ ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Leonard Crestez authored
Test that applications binding listening sockets to VRFs without specifying TCP_MD5SIG_FLAG_IFINDEX will work as expected. This would be broken if __tcp_md5_do_lookup always made a strict comparison on l3index. See this email: https://lore.kernel.org/netdev/209548b5-27d2-2059-f2e9-2148f5a0291b@gmail.com/ Applications using tcp_l3mdev_accept=1 and a single global socket (not bound to any interface) also should have a way to specify keys that are only for the default VRF, this is done by --force-bind-key-ifindex without otherwise binding to a device. Signed-off-by:
Leonard Crestez <cdleonard@gmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Leonard Crestez authored
These options allow explicit control over the TCP_MD5SIG_FLAG_IFINDEX flag instead of always setting it based on binding to an interface. Do this by converting to getopt_long because nettest has too many single-character flags already and getopt_long is widely used in selftests. Signed-off-by:
Leonard Crestez <cdleonard@gmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Leonard Crestez authored
Multiple VRFs are generally meant to be "separate" but right now md5 keys for the default VRF also affect connections inside VRFs if the IP addresses happen to overlap. So far the combination of TCP_MD5SIG_FLAG_IFINDEX with tcpm_ifindex == 0 was an error, accept this to mean "key only applies to default VRF". This is what applications using VRFs for traffic separation want. Signed-off-by:
Leonard Crestez <cdleonard@gmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Leonard Crestez authored
With net.ipv4.tcp_l3mdev_accept=1 it is possible for a listen socket to accept connection from the same client address in different VRFs. It is also possible to set different MD5 keys for these clients which differ only in the tcpm_l3index field. This appears to work when distinguishing between different VRFs but not between non-VRF and VRF connections. In particular: * tcp_md5_do_lookup_exact will match a non-vrf key against a vrf key. This means that adding a key with l3index != 0 after a key with l3index == 0 will cause the earlier key to be deleted. Both keys can be present if the non-vrf key is added later. * _tcp_md5_do_lookup can match a non-vrf key before a vrf key. This casues failures if the passwords differ. Fix this by making tcp_md5_do_lookup_exact perform an actual exact comparison on l3index and by making __tcp_md5_do_lookup perfer vrf-bound keys above other considerations like prefixlen. Fixes: dea53bb8 ("tcp: Add l3index to tcp_md5sig_key and md5 functions") Signed-off-by:
Leonard Crestez <cdleonard@gmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vegard Nossum authored
Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/usb/lan78xx.o: in function `lan78xx_set_multicast': lan78xx.c:(.text+0x48cf): undefined reference to `crc32_le' The actual use of crc32_le() comes indirectly through ether_crc(). Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
transport encap_port update should be updated when sctp_vtag_verify() succeeds, namely, returns 1, not returns 0. Correct it in this patch. While at it, also fix the indentation. Fixes: a1dd2cf2 ("sctp: allow changing transport encap_port by peer packets") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kele Huang authored
Commit a86ed2cf ("ptp: Don't print an error if ptp_kvm is not supported") fixes the error message print on ARM platform by only concerning about the case that the error returned from kvm_arch_ptp_init() is not -EOPNOTSUPP. Although the ARM platform returns -EOPNOTSUPP if ptp_kvm is not supported while X86_64 platform returns -KVM_EOPNOTSUPP, both error codes share the same value 95. Actually kvm_arch_ptp_init() on X86_64 platform can return three kinds of errors (-KVM_ENOSYS, -KVM_EOPNOTSUPP and -KVM_EFAULT). The problem is that -KVM_EOPNOTSUPP is masked out and -KVM_EFAULT is ignored among them. This patch fixes this by returning them to ptp_kvm_init() respectively. Signed-off-by:
Kele Huang <huangkele@bytedance.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Quite calm. The noisy DSA driver (embedded switches) changes, and adjustment to IPv6 IOAM behavior add to diffstat's bottom line but are not scary. Current release - regressions: - af_unix: rename UNIX-DGRAM to UNIX to maintain backwards compatibility - procfs: revert "add seq_puts() statement for dev_mcast", minor format change broke user space Current release - new code bugs: - dsa: fix bridge_num not getting cleared after ports leaving the bridge, resource leak - dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware bridges using VID 0, prevent packet drops if pvid is removed - dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware, prevent HW getting confused about station to VLAN mapping Previous releases - regressions: - virtio-net: fix for skb_over_panic inside big mode - phy: do not shutdown PHYs in READY state - dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's, fix link LED staying lit after ifdown - mptcp: fix possible infinite wait on recvmsg(MSG_WAITALL) - mqprio: Correct stats in mqprio_dump_class_stats() - ice: fix deadlock for Tx timestamp tracking flush - stmmac: fix feature detection on old hardware Previous releases - always broken: - sctp: account stream padding length for reconf chunk - icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe() - isdn: cpai: check ctr->cnr to avoid array index out of bound - isdn: mISDN: fix sleeping function called from invalid context - nfc: nci: fix potential UAF of rf_conn_info object - dsa: microchip: prevent ksz_mib_read_work from kicking back in after it's canceled in .remove and crashing - dsa: mv88e6xxx: isolate the ATU databases of standalone and bridged ports - dsa: sja1105, ocelot: break circular dependency between switch and tag drivers - dsa: felix: improve timestamping in presence of packe loss - mlxsw: thermal: fix out-of-bounds memory accesses Misc: - ipv6: ioam: move the check for undefined bits to improve interoperability" * tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits) icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe MAINTAINERS: Update the devicetree documentation path of imx fec driver sctp: account stream padding length for reconf chunk mlxsw: thermal: Fix out-of-bounds memory accesses ethernet: s2io: fix setting mac address during resume NFC: digital: fix possible memory leak in digital_in_send_sdd_req() NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() nfc: fix error handling of nfc_proto_register() Revert "net: procfs: add seq_puts() statement for dev_mcast" net: encx24j600: check error in devm_regmap_init_encx24j600 net: korina: select CRC32 net: arc: select CRC32 net: dsa: felix: break at first CPU port during init and teardown net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header net: mscc: ocelot: deny TX timestamping of non-PTP packets net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb ...
-
Brett Creeley authored
Currently when a user uses "devlink dev info", the fw.mgmt.api will be the major.minor numbers as shown below: devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver ice serial_number 00-01-00-ff-ff-00-00-00 versions: fixed: board.id K91258-000 running: fw.mgmt 6.1.2 fw.mgmt.api 1.7 <--- No patch number included fw.mgmt.build 0xd75e7d06 fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.app.name ICE OS Default Package fw.app 1.3.27.0 fw.app.bundle_id 0xc0000001 fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 stored: fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 There are many features in the driver that depend on the major, minor, and patch version of the FW. Without the patch number in the output for fw.mgmt.api debugging issues related to the FW API version is difficult. Also, using major.minor.patch aligns with the existing firmware version which uses a 3 digit value. Fix this by making the fw.mgmt.api print the major.minor.patch versions. Shown below is the result: devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver ice serial_number 00-01-00-ff-ff-00-00-00 versions: fixed: board.id K91258-000 running: fw.mgmt 6.1.2 fw.mgmt.api 1.7.9 <--- patch number included fw.mgmt.build 0xd75e7d06 fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.app.name ICE OS Default Package fw.app 1.3.27.0 fw.app.bundle_id 0xc0000001 fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 stored: fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 Fixes: ff2e5c70 ("ice: add basic handler for devlink .info_get") Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Tested-by:
Gurucharan G <gurucharanx.g@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Michal Swiatkowski authored
Correct parameters order in call to ice_tunnel_idx_to_entry function. Entry in sparse port table is correct when the idx is 0. For idx 1 one correct entry should be skipped, for idx 2 two of them should be skipped etc. Change if condition to be true when idx is 0, which means that previous valid entry of this tunnel type were skipped. Fixes: b20e6c17 ("ice: convert to new udp_tunnel infrastructure") Signed-off-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by:
Gurucharan G <gurucharanx.g@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Dave Ertman authored
In the remove path, there is an attempt to free the aux_idx IDA whether it was allocated or not. This can potentially cause a crash when unloading the driver on systems that do not initialize support for RDMA. But, this free cannot be gated by the status bit for RDMA, since it is allocated if the driver detects support for RDMA at probe time, but the driver can enter into a state where RDMA is not supported after the IDA has been allocated at probe time and this would lead to a memory leak. Initialize aux_idx to an invalid value and check for a valid value when unloading to determine if an IDA free is necessary. Fixes: d25a0fc4 ("ice: Initialize RDMA support") Reported-by:
Jun Miao <jun.miao@windriver.com> Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Tested-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-