- Jun 12, 2024
-
-
Luke D. Jones authored
[ Upstream commit 2be46155 ] The 2024 ASUS ROG G814J model is much the same as the 2023 model and the 2023 16" version. We can use the same Cirrus Amp quirk. Fixes: 811dd426 ("ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41") Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20240526091032.114545-1-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Luke D. Jones authored
[ Upstream commit b759a5f0 ] Amends the last quirk for the G634 with 0x1caf subsys to enable the rear speakers via pincfg. Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20230704044619.19343-4-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de> Stable-dep-of: 2be46155 ("ALSA: hda/realtek: Adjust G814JZR to use SPI init for amp") Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Luke D. Jones authored
[ Upstream commit 555434fd ] Adds the required quirk to enable the Cirrus amp and correct pins on the ASUS ROG G634Z series. While this works if the related _DSD properties are made available, these aren't included in the ACPI of these laptops (yet). Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20230619060320.1336455-1-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de> Stable-dep-of: 2be46155 ("ALSA: hda/realtek: Adjust G814JZR to use SPI init for amp") Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Takashi Iwai authored
[ Upstream commit 495000a3 ] The card-specific debugfs entries are removed at the last stage of card free phase, and it's performed after synchronization of the closes of all opened fds. This works fine for most cases, but it can be potentially problematic for a hotplug device like USB-audio. Due to the nature of snd_card_free_when_closed(), the card free isn't called immediately after the driver removal for a hotplug device, but it's left until the last fd is closed. It implies that the card debugfs entries also remain. Meanwhile, when a new device is inserted before the last close and the very same card slot is assigned, the driver tries to create the card debugfs root again on the very same path. This conflicts with the remaining entry, and results in the kernel warning such as: debugfs: Directory 'card0' with parent 'sound' already present! with the missing debugfs entry afterwards. For avoiding such conflicts, remove debugfs entries at the device disconnection phase instead. The jack kctl debugfs entries get removed in snd_jack_dev_disconnect() instead of each kctl private_free. Fixes: 2d670ea2 ("ALSA: jack: implement software jack injection via debugfs") Link: https://lore.kernel.org/r/20240524151256.32521-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Takashi Iwai authored
[ Upstream commit 7234795b ] We can simplify the code gracefully with new guard() macro and co for automatic cleanup of locks. Only the code refactoring, and no functional changes. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240227085306.9764-11-tiwai@suse.de Stable-dep-of: 495000a3 ("ALSA: core: Remove debugfs at disconnection") Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Friedrich Vock authored
[ Upstream commit 44382b3e ] err is a 32-bit integer, but elf_update returns an off_t, which is 64-bit at least on 64-bit platforms. If symbols_patch is called on a binary between 2-4GB in size, the result will be negative when cast to a 32-bit integer, which the code assumes means an error occurred. This can wrongly trigger build failures when building very large kernel images. Fixes: fbbb68de ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object") Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240514070931.199694-1-friedrich.vock@gmx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Tetsuo Handa authored
[ Upstream commit b7949189 ] Since commit a6aa8fca ("dma-buf/sw-sync: Reduce irqsave/irqrestore from known context") by error replaced spin_unlock_irqrestore() with spin_unlock_irq() for both sync_debugfs_show() and sync_print_obj() despite sync_print_obj() is called from sync_debugfs_show(), lockdep complains inconsistent lock state warning. Use plain spin_{lock,unlock}() for sync_print_obj(), for sync_debugfs_show() is already using spin_{lock,unlock}_irq(). Reported-by: syzbot <syzbot+a225ee3df7e7f9372dbe@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=a225ee3df7e7f9372dbe Fixes: a6aa8fca ("dma-buf/sw-sync: Reduce irqsave/irqrestore from known context") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/c2e46020-aaa6-4e06-bf73-f05823f913f0@I-love.SAKURA.ne.jp Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Gal Pressman authored
[ Upstream commit 83fea49f ] When the skb is encapsulated, adjust the inner UDP header instead of the outer one, and account for UDP header (instead of TCP) in the inline header size calculation. Fixes: 689adf0d ("net/mlx5e: Add UDP GSO support") Reported-by: Jason Baron <jbaron@akamai.com> Closes: https://lore.kernel.org/netdev/c42961cb-50b9-4a9a-bd43-87fe48d88d29@akamai.com/ Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Carolina Jubran authored
[ Upstream commit 5c74195d ] Previously, the driver incorrectly used rx_dropped to report device buffer exhaustion. According to the documentation, rx_dropped should not be used to count packets dropped due to buffer exhaustion, which is the purpose of rx_missed_errors. Use rx_missed_errors as intended for counting packets dropped due to buffer exhaustion. Fixes: 269e6b3a ("net/mlx5e: Report additional error statistics in get stats ndo") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Rahul Rameshbabu authored
[ Upstream commit 9a52f6d4 ] Remove faulty check disabling checksum offload and GSO for offload of simple IPsec tunnel L4 traffic. Comment previously describing the deleted code incorrectly claimed the check prevented double tunnel (or three layers of ip headers). Fixes: f1267798 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maher Sanalla authored
[ Upstream commit 51ef9305 ] Currently, the driver does not enforce that lag bond slaves must have matching roce capabilities. Yet, in mlx5_do_bond(), the driver attempts to enable roce on all vports of the bond slaves, causing the following syndrome when one slave has no roce fw support: mlx5_cmd_out_err:809:(pid 25427): MODIFY_NIC_VPORT_CONTEXT(0×755) op_mod(0×0) failed, status bad parameter(0×3), syndrome (0xc1f678), err(-22) Thus, create HW lag only if bond's slaves agree on roce state, either all slaves have roce support resulting in a roce lag bond, or none do, resulting in a raw eth bond. Fixes: 7907f23a ("net/mlx5: Implement RoCE LAG feature") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Mathieu Othacehe authored
[ Upstream commit 128d54fb ] Following a similar reinstate for the KSZ8081 and KSZ9031. Older kernels would use the genphy_soft_reset if the PHY did not implement a .soft_reset. The KSZ8061 errata described here: https://ww1.microchip.com/downloads/en/DeviceDoc/KSZ8061-Errata-DS80000688B.pdf and worked around with 232ba3a5 ("net: phy: Micrel KSZ8061: link failure after cable connect") is back again without this soft reset. Fixes: 6e2d85ec ("net: phy: Stop with excessive soft reset") Tested-by: Karim Ben Houcine <karim.benhoucine@landisgyr.com> Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sagi Grimberg authored
[ Upstream commit f97914e3 ] When disabling an nvmet namespace, there is a period where the subsys->lock is released, as the ns disable waits for backend IO to complete, and the ns percpu ref to be properly killed. The original intent was to avoid taking the subsystem lock for a prolong period as other processes may need to acquire it (for example new incoming connections). However, it opens up a window where another process may come in and enable the ns, (re)intiailizing the ns percpu_ref, causing the disable sequence to hang. Solve this by taking the global nvmet_config_sem over the entire configfs enable/disable sequence. Fixes: a07b4970 ("nvmet: add a generic NVMe target") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Fedor Pchelkin authored
[ Upstream commit e64746e7 ] cpumask_of_node() can be called for NUMA_NO_NODE inside do_map_benchmark() resulting in the following sanitizer report: UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask [64][1]' CPU: 1 PID: 990 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) ubsan_epilogue (lib/ubsan.c:232) __ubsan_handle_out_of_bounds (lib/ubsan.c:429) cpumask_of_node (arch/x86/include/asm/topology.h:72) [inline] do_map_benchmark (kernel/dma/map_benchmark.c:104) map_benchmark_ioctl (kernel/dma/map_benchmark.c:246) full_proxy_unlocked_ioctl (fs/debugfs/file.c:333) __x64_sys_ioctl (fs/ioctl.c:890) do_syscall_64 (arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Use cpumask_of_node() in place when binding a kernel thread to a cpuset of a particular node. Note that the provided node id is checked inside map_benchmark_ioctl(). It's just a NUMA_NO_NODE case which is not handled properly later. Found by Linux Verification Center (linuxtesting.org). Fixes: 65789daa ("dma-mapping: add benchmark support for streaming DMA APIs") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Barry Song <baohua@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Fedor Pchelkin authored
[ Upstream commit 1ff05e72 ] While validating node ids in map_benchmark_ioctl(), node_possible() may be provided with invalid argument outside of [0,MAX_NUMNODES-1] range leading to: BUG: KASAN: wild-memory-access in map_benchmark_ioctl (kernel/dma/map_benchmark.c:214) Read of size 8 at addr 1fffffff8ccb6398 by task dma_map_benchma/971 CPU: 7 PID: 971 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) kasan_report (mm/kasan/report.c:603) kasan_check_range (mm/kasan/generic.c:189) variable_test_bit (arch/x86/include/asm/bitops.h:227) [inline] arch_test_bit (arch/x86/include/asm/bitops.h:239) [inline] _test_bit at (include/asm-generic/bitops/instrumented-non-atomic.h:142) [inline] node_state (include/linux/nodemask.h:423) [inline] map_benchmark_ioctl (kernel/dma/map_benchmark.c:214) full_proxy_unlocked_ioctl (fs/debugfs/file.c:333) __x64_sys_ioctl (fs/ioctl.c:890) do_syscall_64 (arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Compare node ids with sane bounds first. NUMA_NO_NODE is considered a special valid case meaning that benchmarking kthreads won't be bound to a cpuset of a given node. Found by Linux Verification Center (linuxtesting.org). Fixes: 65789daa ("dma-mapping: add benchmark support for streaming DMA APIs") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Andy Shevchenko authored
[ Upstream commit 9f788ba4 ] There is no need to set the DMA mapped flag of the message if it has no mapped transfers. Moreover, it may give the code a chance to take the wrong paths, i.e. to exercise DMA related APIs on unmapped data. Make __spi_map_msg() to bail earlier on the above mentioned cases. Fixes: 99adef31 ("spi: Provide core support for DMA mapping transfers") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://msgid.link/r/20240522171018.3362521-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Pablo Neira Ayuso authored
[ Upstream commit aff5c01f ] Revert f6ae9f12 ("netfilter: nft_payload: add C-VLAN support"). f41f72d0 ("netfilter: nft_payload: simplify vlan header handling") already allows to match on inner vlan tags by subtract the vlan header size to the payload offset which has been popped and stored in skbuff metadata fields. Fixes: f6ae9f12 ("netfilter: nft_payload: add C-VLAN support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit dc21c6cc ] syzbot reported that nf_reinject() could be called without rcu_read_lock() : WARNING: suspicious RCU usage 6.9.0-rc7-syzkaller-02060-g5c1672705a1a #0 Not tainted net/netfilter/nfnetlink_queue.c:263 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by syz-executor.4/13427: #0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline] #0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_do_batch kernel/rcu/tree.c:2190 [inline] #0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_core+0xa86/0x1830 kernel/rcu/tree.c:2471 #1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] #1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: nfqnl_flush net/netfilter/nfnetlink_queue.c:405 [inline] #1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: instance_destroy_rcu+0x30/0x220 net/netfilter/nfnetlink_queue.c:172 stack backtrace: CPU: 0 PID: 13427 Comm: syz-executor.4 Not tainted 6.9.0-rc7-syzkaller-02060-g5c1672705a1a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712 nf_reinject net/netfilter/nfnetlink_queue.c:323 [inline] nfqnl_reinject+0x6ec/0x1120 net/netfilter/nfnetlink_queue.c:397 nfqnl_flush net/netfilter/nfnetlink_queue.c:410 [inline] instance_destroy_rcu+0x1ae/0x220 net/netfilter/nfnetlink_queue.c:172 rcu_do_batch kernel/rcu/tree.c:2196 [inline] rcu_core+0xafd/0x1830 kernel/rcu/tree.c:2471 handle_softirqs+0x2d6/0x990 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 </IRQ> <TASK> Fixes: 9872bec7 ("[NETFILTER]: nfnetlink: use RCU for queue instances hash") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Larysa Zaremba authored
[ Upstream commit 05d6f442 ] A bug occurs because a safety check guarding AF_XDP-related queues in ethnl_set_channels(), does not trigger. This happens, because kernel and ice driver interpret the ethtool command differently. How the bug occurs: 1. ethtool -l <IFNAME> -> combined: 40 2. Attach AF_XDP to queue 30 3. ethtool -L <IFNAME> rx 15 tx 15 combined number is not specified, so command becomes {rx_count = 15, tx_count = 15, combined_count = 40}. 4. ethnl_set_channels checks, if there are any AF_XDP of queues from the new (combined_count + rx_count) to the old one, so from 55 to 40, check does not trigger. 5. ice interprets `rx 15 tx 15` as 15 combined channels and deletes the queue that AF_XDP is attached to. Interpret the command in a way that is more consistent with ethtool manual [0] (--show-channels and --set-channels). Considering that in the ice driver only the difference between RX and TX queues forms dedicated channels, change the correct way to set number of channels to: ethtool -L <IFNAME> combined 10 /* For symmetric queues */ ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */ [0] https://man7.org/linux/man-pages/man8/ethtool.8.html Fixes: 87324e74 ("ice: Implement ethtool ops for channels") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Henry Wang authored
[ Upstream commit a3607581 ] Currently, the late XenStore init protocol is only triggered properly for the case that HVM_PARAM_STORE_PFN is ~0ULL (invalid). For the case that XenStore interface is allocated but not ready (the connection status is not XENSTORE_CONNECTED), Linux should also wait until the XenStore is set up properly. Introduce a macro to describe the XenStore interface is ready, use it in xenbus_probe_initcall() to select the code path of doing the late XenStore init protocol or not. Since now we have more than one condition for XenStore late init, rework the check in xenbus_probe() for the free_irq(). Take the opportunity to enhance the check of the allocated XenStore interface can be properly mapped, and return error early if the memremap() fails. Fixes: 5b335394 ("xen: add support for initializing xenstore later as HVM domain") Signed-off-by: Henry Wang <xin.wang2@amd.com> Signed-off-by: Michal Orzel <michal.orzel@amd.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20240517011516.1451087-1-xin.wang2@amd.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Ryosuke Yasuoka authored
[ Upstream commit 6671e352 ] When nci_rx_work() receives a zero-length payload packet, it should not discard the packet and exit the loop. Instead, it should continue processing subsequent packets. Fixes: d24b0353 ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet") Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240521153444.535399-1-ryasuoka@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Tetsuo Handa authored
[ Upstream commit 19e35f24 ] Commit 7e8cdc97 ("nfc: Add KCOV annotations") added kcov_remote_start_common()/kcov_remote_stop() pair into nci_rx_work(), with an assumption that kcov_remote_stop() is called upon continue of the for loop. But commit d24b0353 ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet") forgot to call kcov_remote_stop() before break of the for loop. Reported-by: syzbot <syzbot+0438378d6f157baae1a2@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=0438378d6f157baae1a2 Fixes: d24b0353 ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet") Suggested-by: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/6d10f829-5a0c-405a-b39a-d7266f3a1a0b@I-love.SAKURA.ne.jp Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 6671e352 ("nfc: nci: Fix handling of zero-length payload packets in nci_rx_work()") Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Paolo Abeni authored
[ Upstream commit 26afda78 ] Christoph reported the following splat: WARNING: CPU: 1 PID: 772 at net/ipv4/af_inet.c:761 __inet_accept+0x1f4/0x4a0 Modules linked in: CPU: 1 PID: 772 Comm: syz-executor510 Not tainted 6.9.0-rc7-g7da7119fe22b #56 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:__inet_accept+0x1f4/0x4a0 net/ipv4/af_inet.c:759 Code: 04 38 84 c0 0f 85 87 00 00 00 41 c7 04 24 03 00 00 00 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ec b7 da fd <0f> 0b e9 7f fe ff ff e8 e0 b7 da fd 0f 0b e9 fe fe ff ff 89 d9 80 RSP: 0018:ffffc90000c2fc58 EFLAGS: 00010293 RAX: ffffffff836bdd14 RBX: 0000000000000000 RCX: ffff888104668000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff836bdb89 R09: fffff52000185f64 R10: dffffc0000000000 R11: fffff52000185f64 R12: dffffc0000000000 R13: 1ffff92000185f98 R14: ffff88810754d880 R15: ffff8881007b7800 FS: 000000001c772880(0000) GS:ffff88811b280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb9fcf2e178 CR3: 00000001045d2002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> inet_accept+0x138/0x1d0 net/ipv4/af_inet.c:786 do_accept+0x435/0x620 net/socket.c:1929 __sys_accept4_file net/socket.c:1969 [inline] __sys_accept4+0x9b/0x110 net/socket.c:1999 __do_sys_accept net/socket.c:2016 [inline] __se_sys_accept net/socket.c:2013 [inline] __x64_sys_accept+0x7d/0x90 net/socket.c:2013 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x58/0x100 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x4315f9 Code: fd ff 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 ab b4 fd ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdb26d9c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 0000000000400300 RCX: 00000000004315f9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 00000000006e1018 R08: 0000000000400300 R09: 0000000000400300 R10: 0000000000400300 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000040cdf0 R14: 000000000040ce80 R15: 0000000000000055 </TASK> The reproducer invokes shutdown() before entering the listener status. After commit 94062790 ("tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets"), the above causes the child to reach the accept syscall in FIN_WAIT1 status. Eric noted we can relax the existing assertion in __inet_accept() Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/490 Suggested-by: Eric Dumazet <edumazet@google.com> Fixes: 94062790 ("tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets") Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/23ab880a44d8cfd967e84de8b93dbf48848e3d8c.1716299669.git.pabeni@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Paolo Abeni authored
[ Upstream commit 711bdd51 ] No functional changes intended. The new helper will be used by the MPTCP protocol in the next patch to avoid duplicating a few LoC. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 26afda78 ("net: relax socket state check at accept time.") Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dae R. Jeong authored
[ Upstream commit 91e61dd7 ] In tls_init(), a write memory barrier is missing, and store-store reordering may cause NULL dereference in tls_{setsockopt,getsockopt}. CPU0 CPU1 ----- ----- // In tls_init() // In tls_ctx_create() ctx = kzalloc() ctx->sk_proto = READ_ONCE(sk->sk_prot) -(1) // In update_sk_prot() WRITE_ONCE(sk->sk_prot, tls_prots) -(2) // In sock_common_setsockopt() READ_ONCE(sk->sk_prot)->setsockopt() // In tls_{setsockopt,getsockopt}() ctx->sk_proto->setsockopt() -(3) In the above scenario, when (1) and (2) are reordered, (3) can observe the NULL value of ctx->sk_proto, causing NULL dereference. To fix it, we rely on rcu_assign_pointer() which implies the release barrier semantic. By moving rcu_assign_pointer() after ctx->sk_proto is initialized, we can ensure that ctx->sk_proto are visible when changing sk->sk_prot. Fixes: d5bee737 ("net/tls: Annotate access to sk_prot with READ_ONCE/WRITE_ONCE") Signed-off-by: Yewon Choi <woni9911@gmail.com> Signed-off-by: Dae R. Jeong <threeearcat@gmail.com> Link: https://lore.kernel.org/netdev/ZU4OJG56g2V9z_H7@dragonet/T/ Link: https://lore.kernel.org/r/Zkx4vjSFp0mfpjQ2@libra05 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Wei Fang authored
[ Upstream commit 3b1c92f8 ] The assignment of pps_enable is protected by tmreg_lock, but the read operation of pps_enable is not. So the Coverity tool reports a lock evasion warning which may cause data race to occur when running in a multithread environment. Although this issue is almost impossible to occur, we'd better fix it, at least it seems more logically reasonable, and it also prevents Coverity from continuing to issue warnings. Fixes: 278d2404 ("net: fec: ptp: Enable PPS output based on ptp clock") Signed-off-by: Wei Fang <wei.fang@nxp.com> Link: https://lore.kernel.org/r/20240521023800.17102-1-wei.fang@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jacob Keller authored
[ Upstream commit b35b1c0b ] This reverts commit 56573604. According to the commit, it implements a manual AN-37 for some "troublesome" Juniper MX5 switches. This appears to be a workaround for a particular switch. It has been reported that this causes a severe breakage for other switches, including a Cisco 3560CX-12PD-S. The code appears to be a workaround for a specific switch which fails to link in SFI mode. It expects to see AN-37 auto negotiation in order to link. The Cisco switch is not expecting AN-37 auto negotiation. When the device starts the manual AN-37, the Cisco switch decides that the port is confused and stops attempting to link with it. This persists until a power cycle. A simple driver unload and reload does not resolve the issue, even if loading with a version of the driver which lacks this workaround. The authors of the workaround commit have not responded with clarifications, and the result of the workaround is complete failure to connect with other switches. This appears to be a case where the driver can either "correctly" link with the Juniper MX5 switch, at the cost of bricking the link with the Cisco switch, or it can behave properly for the Cisco switch, but fail to link with the Junipir MX5 switch. I do not know enough about the standards involved to clearly determine whether either switch is at fault or behaving incorrectly. Nor do I know whether there exists some alternative fix which corrects behavior with both switches. Revert the workaround for the Juniper switch. Fixes: 56573604 ("ixgbe: Manual AN-37 for troublesome link partners for X550 SFI") Link: https://lore.kernel.org/netdev/cbe874db-9ac9-42b8-afa0-88ea910e1e99@intel.com/T/ Link: https://forum.proxmox.com/threads/intel-x553-sfp-ixgbe-no-go-on-pve8.135129/#post-612291 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Jeff Daly <jeffd@silicom-usa.com> Cc: kernel.org-fo5k2w@ycharbi.fr Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240520-net-2024-05-20-revert-silicom-switch-workaround-v1-1-50f80f261c94@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Matthew Bystrin authored
[ Upstream commit a2a4d4a6 ] If the load access fault occures in a leaf function (with CONFIG_FRAME_POINTER=y), when wrong stack trace will be displayed: [<ffffffff804853c2>] regmap_mmio_read32le+0xe/0x1c ---[ end trace 0000000000000000 ]--- Registers dump: ra 0xffffffff80485758 <regmap_mmio_read+36> sp 0xffffffc80200b9a0 fp 0xffffffc80200b9b0 pc 0xffffffff804853ba <regmap_mmio_read32le+6> Stack dump: 0xffffffc80200b9a0: 0xffffffc80200b9e0 0xffffffc80200b9e0 0xffffffc80200b9b0: 0xffffffff8116d7e8 0x0000000000000100 0xffffffc80200b9c0: 0xffffffd8055b9400 0xffffffd8055b9400 0xffffffc80200b9d0: 0xffffffc80200b9f0 0xffffffff8047c526 0xffffffc80200b9e0: 0xffffffc80200ba30 0xffffffff8047fe9a The assembler dump of the function preambula: add sp,sp,-16 sd s0,8(sp) add s0,sp,16 In the fist stack frame, where ra is not stored on the stack we can observe: 0(sp) 8(sp) .---------------------------------------------. sp->| frame->fp | frame->ra (saved fp) | |---------------------------------------------| fp->| .... | .... | |---------------------------------------------| | | | and in the code check is performed: if (regs && (regs->epc == pc) && (frame->fp & 0x7)) I see no reason to check frame->fp value at all, because it is can be uninitialized value on the stack. A better way is to check frame->ra to be an address on the stack. After the stacktrace shows as expect: [<ffffffff804853c2>] regmap_mmio_read32le+0xe/0x1c [<ffffffff80485758>] regmap_mmio_read+0x24/0x52 [<ffffffff8047c526>] _regmap_bus_reg_read+0x1a/0x22 [<ffffffff8047fe9a>] _regmap_read+0x5c/0xea [<ffffffff80480376>] _regmap_update_bits+0x76/0xc0 ... ---[ end trace 0000000000000000 ]--- As pointed by Samuel Holland it is incorrect to remove check of the stackframe entirely. Changes since v2 [2]: - Add accidentally forgotten curly brace Changes since v1 [1]: - Instead of just dropping frame->fp check, replace it with validation of frame->ra, which should be a stack address. - Move frame pointer validation into the separate function. [1] https://lore.kernel.org/linux-riscv/20240426072701.6463-1-dev.mbstr@gmail.com/ [2] https://lore.kernel.org/linux-riscv/20240521131314.48895-1-dev.mbstr@gmail.com/ Fixes: f766f77a ("riscv/stacktrace: Fix stack output without ra on the stack top") Signed-off-by: Matthew Bystrin <dev.mbstr@gmail.com> Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20240521191727.62012-1-dev.mbstr@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Guo Ren authored
[ Upstream commit 7ecdadf7 ] The current walk_stackframe with FRAME_POINTER would stop unwinding at ret_from_exception: BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1518 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 1, name: init CPU: 0 PID: 1 Comm: init Not tainted 5.10.113-00021-g15c15974895c-dirty #192 Call Trace: [<ffffffe0002038c8>] walk_stackframe+0x0/0xee [<ffffffe000aecf48>] show_stack+0x32/0x4a [<ffffffe000af1618>] dump_stack_lvl+0x72/0x8e [<ffffffe000af1648>] dump_stack+0x14/0x1c [<ffffffe000239ad2>] ___might_sleep+0x12e/0x138 [<ffffffe000239aec>] __might_sleep+0x10/0x18 [<ffffffe000afe3fe>] down_read+0x22/0xa4 [<ffffffe000207588>] do_page_fault+0xb0/0x2fe [<ffffffe000201b80>] ret_from_exception+0x0/0xc The optimization would help walk_stackframe cross the pt_regs frame and get more backtrace of debug info: BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1518 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 1, name: init CPU: 0 PID: 1 Comm: init Not tainted 5.10.113-00021-g15c15974895c-dirty #192 Call Trace: [<ffffffe0002038c8>] walk_stackframe+0x0/0xee [<ffffffe000aecf48>] show_stack+0x32/0x4a [<ffffffe000af1618>] dump_stack_lvl+0x72/0x8e [<ffffffe000af1648>] dump_stack+0x14/0x1c [<ffffffe000239ad2>] ___might_sleep+0x12e/0x138 [<ffffffe000239aec>] __might_sleep+0x10/0x18 [<ffffffe000afe3fe>] down_read+0x22/0xa4 [<ffffffe000207588>] do_page_fault+0xb0/0x2fe [<ffffffe000201b80>] ret_from_exception+0x0/0xc [<ffffffe000613c06>] riscv_intc_irq+0x1a/0x72 [<ffffffe000201b80>] ret_from_exception+0x0/0xc [<ffffffe00033f44a>] vma_link+0x54/0x160 [<ffffffe000341d7a>] mmap_region+0x2cc/0x4d0 [<ffffffe000342256>] do_mmap+0x2d8/0x3ac [<ffffffe000326318>] vm_mmap_pgoff+0x70/0xb8 [<ffffffe00032638a>] vm_mmap+0x2a/0x36 [<ffffffe0003cfdde>] elf_map+0x72/0x84 [<ffffffe0003d05f8>] load_elf_binary+0x69a/0xec8 [<ffffffe000376240>] bprm_execve+0x246/0x53a [<ffffffe00037786c>] kernel_execve+0xe8/0x124 [<ffffffe000aecdf2>] run_init_process+0xfa/0x10c [<ffffffe000aece16>] try_to_run_init_process+0x12/0x3c [<ffffffe000afa920>] kernel_init+0xb4/0xf8 [<ffffffe000201b80>] ret_from_exception+0x0/0xc Here is the error injection test code for the above output: drivers/irqchip/irq-riscv-intc.c: static asmlinkage void riscv_intc_irq(struct pt_regs *regs) { unsigned long cause = regs->cause & ~CAUSE_IRQ_FLAG; + u32 tmp; __get_user(tmp, (u32 *)0); Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20221109064937.3643993-3-guoren@kernel.org [Palmer: use SYM_CODE_*] Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Stable-dep-of: a2a4d4a6 ("riscv: stacktrace: fixed walk_stackframe()") Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jiri Pirko authored
[ Upstream commit 89875151 ] When request_irq() fails, error path calls vp_del_vqs(). There, as vq is present in the list, free_irq() is called for the same vector. That causes following splat: [ 0.414355] Trying to free already-free IRQ 27 [ 0.414403] WARNING: CPU: 1 PID: 1 at kernel/irq/manage.c:1899 free_irq+0x1a1/0x2d0 [ 0.414510] Modules linked in: [ 0.414540] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc4+ #27 [ 0.414540] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 [ 0.414540] RIP: 0010:free_irq+0x1a1/0x2d0 [ 0.414540] Code: 1e 00 48 83 c4 08 48 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 90 8b 74 24 04 48 c7 c7 98 80 6c b1 e8 00 c9 f7 ff 90 <0f> 0b 90 90 48 89 ee 4c 89 ef e8 e0 20 b8 00 49 8b 47 40 48 8b 40 [ 0.414540] RSP: 0000:ffffb71480013ae0 EFLAGS: 00010086 [ 0.414540] RAX: 0000000000000000 RBX: ffffa099c2722000 RCX: 0000000000000000 [ 0.414540] RDX: 0000000000000000 RSI: ffffb71480013998 RDI: 0000000000000001 [ 0.414540] RBP: 0000000000000246 R08: 00000000ffffdfff R09: 0000000000000001 [ 0.414540] R10: 00000000ffffdfff R11: ffffffffb18729c0 R12: ffffa099c1c91760 [ 0.414540] R13: ffffa099c1c916a4 R14: ffffa099c1d2f200 R15: ffffa099c1c91600 [ 0.414540] FS: 0000000000000000(0000) GS:ffffa099fec40000(0000) knlGS:0000000000000000 [ 0.414540] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.414540] CR2: 0000000000000000 CR3: 0000000008e3e001 CR4: 0000000000370ef0 [ 0.414540] Call Trace: [ 0.414540] <TASK> [ 0.414540] ? __warn+0x80/0x120 [ 0.414540] ? free_irq+0x1a1/0x2d0 [ 0.414540] ? report_bug+0x164/0x190 [ 0.414540] ? handle_bug+0x3b/0x70 [ 0.414540] ? exc_invalid_op+0x17/0x70 [ 0.414540] ? asm_exc_invalid_op+0x1a/0x20 [ 0.414540] ? free_irq+0x1a1/0x2d0 [ 0.414540] vp_del_vqs+0xc1/0x220 [ 0.414540] vp_find_vqs_msix+0x305/0x470 [ 0.414540] vp_find_vqs+0x3e/0x1a0 [ 0.414540] vp_modern_find_vqs+0x1b/0x70 [ 0.414540] init_vqs+0x387/0x600 [ 0.414540] virtnet_probe+0x50a/0xc80 [ 0.414540] virtio_dev_probe+0x1e0/0x2b0 [ 0.414540] really_probe+0xc0/0x2c0 [ 0.414540] ? __pfx___driver_attach+0x10/0x10 [ 0.414540] __driver_probe_device+0x73/0x120 [ 0.414540] driver_probe_device+0x1f/0xe0 [ 0.414540] __driver_attach+0x88/0x180 [ 0.414540] bus_for_each_dev+0x85/0xd0 [ 0.414540] bus_add_driver+0xec/0x1f0 [ 0.414540] driver_register+0x59/0x100 [ 0.414540] ? __pfx_virtio_net_driver_init+0x10/0x10 [ 0.414540] virtio_net_driver_init+0x90/0xb0 [ 0.414540] do_one_initcall+0x58/0x230 [ 0.414540] kernel_init_freeable+0x1a3/0x2d0 [ 0.414540] ? __pfx_kernel_init+0x10/0x10 [ 0.414540] kernel_init+0x1a/0x1c0 [ 0.414540] ret_from_fork+0x31/0x50 [ 0.414540] ? __pfx_kernel_init+0x10/0x10 [ 0.414540] ret_from_fork_asm+0x1a/0x30 [ 0.414540] </TASK> Fix this by calling deleting the current vq when request_irq() fails. Fixes: 0b0f9dc5 ("Revert "virtio_pci: use shared interrupts for virtqueues"") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20240426150845.3999481-1-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yang Li authored
[ Upstream commit 1e8b7b3d ] The patch updates the function documentation comment for rv_en(dis)able_monitor to adhere to the kernel-doc specification. Link: https://lore.kernel.org/linux-trace-kernel/20240520054239.61784-1-yang.lee@linux.alibaba.com Fixes: 102227b9 ("rv: Add Runtime Verification (RV) interface") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jiangfeng Xiao authored
[ Upstream commit ffbf4fb9 ] When CONFIG_DEBUG_BUGVERBOSE=n, we fail to add necessary padding bytes to bug_table entries, and as a result the last entry in a bug table will be ignored, potentially leading to an unexpected panic(). All prior entries in the table will be handled correctly. The arm64 ABI requires that struct fields of up to 8 bytes are naturally-aligned, with padding added within a struct such that struct are suitably aligned within arrays. When CONFIG_DEBUG_BUGVERPOSE=y, the layout of a bug_entry is: struct bug_entry { signed int bug_addr_disp; // 4 bytes signed int file_disp; // 4 bytes unsigned short line; // 2 bytes unsigned short flags; // 2 bytes } ... with 12 bytes total, requiring 4-byte alignment. When CONFIG_DEBUG_BUGVERBOSE=n, the layout of a bug_entry is: struct bug_entry { signed int bug_addr_disp; // 4 bytes unsigned short flags; // 2 bytes < implicit padding > // 2 bytes } ... with 8 bytes total, with 6 bytes of data and 2 bytes of trailing padding, requiring 4-byte alginment. When we create a bug_entry in assembly, we align the start of the entry to 4 bytes, which implicitly handles padding for any prior entries. However, we do not align the end of the entry, and so when CONFIG_DEBUG_BUGVERBOSE=n, the final entry lacks the trailing padding bytes. For the main kernel image this is not a problem as find_bug() doesn't depend on the trailing padding bytes when searching for entries: for (bug = __start___bug_table; bug < __stop___bug_table; ++bug) if (bugaddr == bug_addr(bug)) return bug; However for modules, module_bug_finalize() depends on the trailing bytes when calculating the number of entries: mod->num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry); ... and as the last bug_entry lacks the necessary padding bytes, this entry will not be counted, e.g. in the case of a single entry: sechdrs[i].sh_size == 6 sizeof(struct bug_entry) == 8; sechdrs[i].sh_size / sizeof(struct bug_entry) == 0; Consequently module_find_bug() will miss the last bug_entry when it does: for (i = 0; i < mod->num_bugs; ++i, ++bug) if (bugaddr == bug_addr(bug)) goto out; ... which can lead to a kenrel panic due to an unhandled bug. This can be demonstrated with the following module: static int __init buginit(void) { WARN(1, "hello\n"); return 0; } static void __exit bugexit(void) { } module_init(buginit); module_exit(bugexit); MODULE_LICENSE("GPL"); ... which will trigger a kernel panic when loaded: ------------[ cut here ]------------ hello Unexpected kernel BRK exception at EL1 Internal error: BRK handler: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: hello(O+) CPU: 0 PID: 50 Comm: insmod Tainted: G O 6.9.1 #8 Hardware name: linux,dummy-virt (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : buginit+0x18/0x1000 [hello] lr : buginit+0x18/0x1000 [hello] sp : ffff800080533ae0 x29: ffff800080533ae0 x28: 0000000000000000 x27: 0000000000000000 x26: ffffaba8c4e70510 x25: ffff800080533c30 x24: ffffaba8c4a28a58 x23: 0000000000000000 x22: 0000000000000000 x21: ffff3947c0eab3c0 x20: ffffaba8c4e3f000 x19: ffffaba846464000 x18: 0000000000000006 x17: 0000000000000000 x16: ffffaba8c2492834 x15: 0720072007200720 x14: 0720072007200720 x13: ffffaba8c49b27c8 x12: 0000000000000312 x11: 0000000000000106 x10: ffffaba8c4a0a7c8 x9 : ffffaba8c49b27c8 x8 : 00000000ffffefff x7 : ffffaba8c4a0a7c8 x6 : 80000000fffff000 x5 : 0000000000000107 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff3947c0eab3c0 Call trace: buginit+0x18/0x1000 [hello] do_one_initcall+0x80/0x1c8 do_init_module+0x60/0x218 load_module+0x1ba4/0x1d70 __do_sys_init_module+0x198/0x1d0 __arm64_sys_init_module+0x1c/0x28 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xd8 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: d0ffffe0 910003fd 91000000 9400000b (d4210000) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: BRK handler: Fatal exception Fix this by always aligning the end of a bug_entry to 4 bytes, which is correct regardless of CONFIG_DEBUG_BUGVERBOSE. Fixes: 9fb7410f ("arm64/BUG: Use BRK instruction for generic BUG traps") Signed-off-by: Yuanbin Xie <xieyuanbin1@huawei.com> Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/1716212077-43826-1-git-send-email-xiaojiangfeng@huawei.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Aaron Conole authored
[ Upstream commit 30a92c9e ] Open vSwitch is originally intended to switch at layer 2, only dealing with Ethernet frames. With the introduction of l3 tunnels support, it crossed into the realm of needing to care a bit about some routing details when making forwarding decisions. If an oversized packet would need to be fragmented during this forwarding decision, there is a chance for pmtu to get involved and generate a routing exception. This is gated by the skbuff->pkt_type field. When a flow is already loaded into the openvswitch module this field is set up and transitioned properly as a packet moves from one port to another. In the case that a packet execute is invoked after a flow is newly installed this field is not properly initialized. This causes the pmtud mechanism to omit sending the required exception messages across the tunnel boundary and a second attempt needs to be made to make sure that the routing exception is properly setup. To fix this, we set the outgoing packet's pkt_type to PACKET_OUTGOING, since it can only get to the openvswitch module via a port device or packet command. Even for bridge ports as users, the pkt_type needs to be reset when doing the transmit as the packet is truly outgoing and routing needs to get involved post packet transformations, in the case of VXLAN/GENEVE/udp-tunnel packets. In general, the pkt_type on output gets ignored, since we go straight to the driver, but in the case of tunnel ports they go through IP routing layer. This issue is periodically encountered in complex setups, such as large openshift deployments, where multiple sets of tunnel traversal occurs. A way to recreate this is with the ovn-heater project that can setup a networking environment which mimics such large deployments. We need larger environments for this because we need to ensure that flow misses occur. In these environment, without this patch, we can see: ./ovn_cluster.sh start podman exec ovn-chassis-1 ip r a 170.168.0.5/32 dev eth1 mtu 1200 podman exec ovn-chassis-1 ip netns exec sw01p1 ip r flush cache podman exec ovn-chassis-1 ip netns exec sw01p1 \ ping 21.0.0.3 -M do -s 1300 -c2 PING 21.0.0.3 (21.0.0.3) 1300(1328) bytes of data. From 21.0.0.3 icmp_seq=2 Frag needed and DF set (mtu = 1142) --- 21.0.0.3 ping statistics --- ... Using tcpdump, we can also see the expected ICMP FRAG_NEEDED message is not sent into the server. With this patch, setting the pkt_type, we see the following: podman exec ovn-chassis-1 ip netns exec sw01p1 \ ping 21.0.0.3 -M do -s 1300 -c2 PING 21.0.0.3 (21.0.0.3) 1300(1328) bytes of data. From 21.0.0.3 icmp_seq=1 Frag needed and DF set (mtu = 1222) ping: local error: message too long, mtu=1222 --- 21.0.0.3 ping statistics --- ... In this case, the first ping request receives the FRAG_NEEDED message and a local routing exception is created. Tested-by: Jaime Caamano <jcaamano@redhat.com> Reported-at: https://issues.redhat.com/browse/FDP-164 Fixes: 58264848 ("openvswitch: Add vxlan tunneling support.") Signed-off-by: Aaron Conole <aconole@redhat.com> Acked-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20240516200941.16152-1-aconole@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Olga Kornievskaia authored
[ Upstream commit 3ebcb246 ] Change left over allocation flags. Fixes: a245832a ("pNFS/files: Ensure pNFS allocation modes are consistent with nfsiod") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kuniyuki Iwashima authored
[ Upstream commit 3ebc46ca ] In dctcp_update_alpha(), we use a module parameter dctcp_shift_g as follows: alpha -= min_not_zero(alpha, alpha >> dctcp_shift_g); ... delivered_ce <<= (10 - dctcp_shift_g); It seems syzkaller started fuzzing module parameters and triggered shift-out-of-bounds [0] by setting 100 to dctcp_shift_g: memcpy((void*)0x20000080, "/sys/module/tcp_dctcp/parameters/dctcp_shift_g\000", 47); res = syscall(__NR_openat, /*fd=*/0xffffffffffffff9cul, /*file=*/0x20000080ul, /*flags=*/2ul, /*mode=*/0ul); memcpy((void*)0x20000000, "100\000", 4); syscall(__NR_write, /*fd=*/r[0], /*val=*/0x20000000ul, /*len=*/4ul); Let's limit the max value of dctcp_shift_g by param_set_uint_minmax(). With this patch: # echo 10 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g # cat /sys/module/tcp_dctcp/parameters/dctcp_shift_g 10 # echo 11 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g -bash: echo: write error: Invalid argument [0]: UBSAN: shift-out-of-bounds in net/ipv4/tcp_dctcp.c:143:12 shift exponent 100 is too large for 32-bit type 'u32' (aka 'unsigned int') CPU: 0 PID: 8083 Comm: syz-executor345 Not tainted 6.9.0-05151-g1b294a1f3561 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x201/0x300 lib/dump_stack.c:114 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_shift_out_of_bounds+0x346/0x3a0 lib/ubsan.c:468 dctcp_update_alpha+0x540/0x570 net/ipv4/tcp_dctcp.c:143 tcp_in_ack_event net/ipv4/tcp_input.c:3802 [inline] tcp_ack+0x17b1/0x3bc0 net/ipv4/tcp_input.c:3948 tcp_rcv_state_process+0x57a/0x2290 net/ipv4/tcp_input.c:6711 tcp_v4_do_rcv+0x764/0xc40 net/ipv4/tcp_ipv4.c:1937 sk_backlog_rcv include/net/sock.h:1106 [inline] __release_sock+0x20f/0x350 net/core/sock.c:2983 release_sock+0x61/0x1f0 net/core/sock.c:3549 mptcp_subflow_shutdown+0x3d0/0x620 net/mptcp/protocol.c:2907 mptcp_check_send_data_fin+0x225/0x410 net/mptcp/protocol.c:2976 __mptcp_close+0x238/0xad0 net/mptcp/protocol.c:3072 mptcp_close+0x2a/0x1a0 net/mptcp/protocol.c:3127 inet_release+0x190/0x1f0 net/ipv4/af_inet.c:437 __sock_release net/socket.c:659 [inline] sock_close+0xc0/0x240 net/socket.c:1421 __fput+0x41b/0x890 fs/file_table.c:422 task_work_run+0x23b/0x300 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x9c8/0x2540 kernel/exit.c:878 do_group_exit+0x201/0x2b0 kernel/exit.c:1027 __do_sys_exit_group kernel/exit.c:1038 [inline] __se_sys_exit_group kernel/exit.c:1036 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1036 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xe4/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x7f6c2b5005b6 Code: Unable to access opcode bytes at 0x7f6c2b50058c. RSP: 002b:00007ffe883eb948 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007f6c2b5862f0 RCX: 00007f6c2b5005b6 RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001 RBP: 0000000000000001 R08: 00000000000000e7 R09: ffffffffffffffc0 R10: 0000000000000006 R11: 0000000000000246 R12: 00007f6c2b5862f0 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 </TASK> Reported-by: syzkaller <syzkaller@googlegroups.com> Reported-by: Yue Sun <samsun1006219@gmail.com> Reported-by: xingwei lee <xrivendell7@gmail.com> Closes: https://lore.kernel.org/netdev/CAEkJfYNJM=cw-8x7_Vmj1J6uYVCWMbbvD=EFmDPVBGpTsqOxEA@mail.gmail.com/ Fixes: e3118e83 ("net: tcp: add DCTCP congestion control algorithm") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240517091626.32772-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Hangbin Liu authored
[ Upstream commit efb9f4f1 ] seg6_hmac_init_algo returns without cleaning up the previous allocations if one fails, so it's going to leak all that memory and the crypto tfms. Update seg6_hmac_exit to only free the memory when allocated, so we can reuse the code directly. Fixes: bf355b8d ("ipv6: sr: add core files for SR HMAC support") Reported-by: Sabrina Dubroca <sd@queasysnail.net> Closes: https://lore.kernel.org/netdev/Zj3bh-gE7eT6V6aH@hog/ Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/20240517005435.2600277-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kuniyuki Iwashima authored
[ Upstream commit 9841991a ] Billy Jheng Bing-Jhong reported a race between __unix_gc() and queue_oob(). __unix_gc() tries to garbage-collect close()d inflight sockets, and then if the socket has MSG_OOB in unix_sk(sk)->oob_skb, GC will drop the reference and set NULL to it locklessly. However, the peer socket still can send MSG_OOB message and queue_oob() can update unix_sk(sk)->oob_skb concurrently, leading NULL pointer dereference. [0] To fix the issue, let's update unix_sk(sk)->oob_skb under the sk_receive_queue's lock and take it everywhere we touch oob_skb. Note that we defer kfree_skb() in manage_oob() to silence lockdep false-positive (See [1]). [0]: BUG: kernel NULL pointer dereference, address: 0000000000000008 PF: supervisor write access in kernel mode PF: error_code(0x0002) - not-present page PGD 8000000009f5e067 P4D 8000000009f5e067 PUD 9f5d067 PMD 0 Oops: 0002 [#1] PREEMPT SMP PTI CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc5-00191-gd091e579b864 #110 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events delayed_fput RIP: 0010:skb_dequeue (./include/linux/skbuff.h:2386 ./include/linux/skbuff.h:2402 net/core/skbuff.c:3847) Code: 39 e3 74 3e 8b 43 10 48 89 ef 83 e8 01 89 43 10 49 8b 44 24 08 49 c7 44 24 08 00 00 00 00 49 8b 14 24 49 c7 04 24 00 00 00 00 <48> 89 42 08 48 89 10 e8 e7 c5 42 00 4c 89 e0 5b 5d 41 5c c3 cc cc RSP: 0018:ffffc900001bfd48 EFLAGS: 00000002 RAX: 0000000000000000 RBX: ffff8880088f5ae8 RCX: 00000000361289f9 RDX: 0000000000000000 RSI: 0000000000000206 RDI: ffff8880088f5b00 RBP: ffff8880088f5b00 R08: 0000000000080000 R09: 0000000000000001 R10: 0000000000000003 R11: 0000000000000001 R12: ffff8880056b6a00 R13: ffff8880088f5280 R14: 0000000000000001 R15: ffff8880088f5a80 FS: 0000000000000000(0000) GS:ffff88807dd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000006314000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> unix_release_sock (net/unix/af_unix.c:654) unix_release (net/unix/af_unix.c:1050) __sock_release (net/socket.c:660) sock_close (net/socket.c:1423) __fput (fs/file_table.c:423) delayed_fput (fs/file_table.c:444 (discriminator 3)) process_one_work (kernel/workqueue.c:3259) worker_thread (kernel/workqueue.c:3329 kernel/workqueue.c:3416) kthread (kernel/kthread.c:388) ret_from_fork (arch/x86/kernel/process.c:153) ret_from_fork_asm (arch/x86/entry/entry_64.S:257) </TASK> Modules linked in: CR2: 0000000000000008 Link: https://lore.kernel.org/netdev/a00d3993-c461-43f2-be6d-07259c98509a@rbox.co/ [1] Fixes: 1279f9d9 ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.") Reported-by: Billy Jheng Bing-Jhong <billy@starlabs.sg> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240516134835.8332-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dan Aloni authored
[ Upstream commit 4836da21 ] Under the scenario of IB device bonding, when bringing down one of the ports, or all ports, we saw xprtrdma entering a non-recoverable state where it is not even possible to complete the disconnect and shut it down the mount, requiring a reboot. Following debug, we saw that transport connect never ended after receiving the RDMA_CM_EVENT_DEVICE_REMOVAL callback. The DEVICE_REMOVAL callback is irrespective of whether the CM_ID is connected, and ESTABLISHED may not have happened. So need to work with each of these states accordingly. Fixes: 2acc5cae ('xprtrdma: Prevent dereferencing r_xprt->rx_ep after it is freed') Cc: Sagi Grimberg <sagi.grimberg@vastdata.com> Signed-off-by: Dan Aloni <dan.aloni@vastdata.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dan Aloni authored
[ Upstream commit 0dc9f430 ] It used to be quite awhile ago since 1b63a751 ('SUNRPC: Refactor rpc_clone_client()'), in 2012, that `cl_timeout` was copied in so that all mount parameters propagate to NFSACL clients. However since that change, if mount options as follows are given: soft,timeo=50,retrans=16,vers=3 The resultant NFSACL client receives: cl_softrtry: 1 cl_timeout: to_initval=60000, to_maxval=60000, to_increment=0, to_retries=2, to_exponential=0 These values lead to NFSACL operations not being retried under the condition of transient network outages with soft mount. Instead, getacl call fails after 60 seconds with EIO. The simple fix is to pass the existing client's `cl_timeout` as the new client timeout. Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Benjamin Coddington <bcodding@redhat.com> Link: https://lore.kernel.org/all/20231105154857.ryakhmgaptq3hb6b@gmail.com/T/ Fixes: 1b63a751 ('SUNRPC: Refactor rpc_clone_client()') Signed-off-by: Dan Aloni <dan.aloni@vastdata.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Martin Kaiser authored
[ Upstream commit b322bf9e ] With newer kernels that use fs_context for nfs mounts, remounts fail with -EINVAL. $ mount -t nfs -o nolock 10.0.0.1:/tmp/test /mnt/test/ $ mount -t nfs -o remount /mnt/test/ mount: mounting 10.0.0.1:/tmp/test on /mnt/test failed: Invalid argument For remounts, the nfs server address and port are populated by nfs_init_fs_context and later overwritten with 0x00 bytes by nfs23_parse_monolithic. The remount then fails as the server address is invalid. Fix this by not overwriting nfs server info in nfs23_parse_monolithic if we're doing a remount. Fixes: f2aedb71 ("NFS: Add fs_context support.") Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-