Similar to c->uuids, struct cache's prio_buckets and disk_buckets also
have the potential memory allocation failure during cache registration
if the bucket size > 8MB.

ca->prio_buckets can be stored on cache device in multiple buckets, its
in-memory space is allocated by kzalloc() interface but normally
allocated by alloc_pages() because the size > KMALLOC_MAX_CACHE_SIZE.

So allocation of ca->prio_buckets has the MAX_ORDER restriction too. If
the bucket size > 8MB, by default the page allocator will fail because
the page order > 11 (default MAX_ORDER value). ca->prio_buckets should
also use meta_bucket_bytes(), meta_bucket_pages() to decide its memory
size and use alloc_meta_bucket_pages() to allocate pages, to avoid the
allocation failure during cache set registration when bucket size > 8MB.

ca->disk_buckets is a single bucket size memory buffer, it is used to
iterate each bucket of ca->prio_buckets, and compose the bio based on
memory of ca->disk_buckets, then write ca->disk_buckets memory to cache
disk one-by-one for each bucket of ca->prio_buckets. ca->disk_buckets
should have in-memory size exact to the meta_bucket_pages(), this is the
size that ca->prio_buckets will be stored into each on-disk bucket.

This patch fixes the above issues and handle cache's prio_buckets and
disk_buckets properly for bucket size larger than 8MB.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Bcache allocates a whole bucket to store c->uuids on cache device, and
allocates continuous pages to store it in-memory. When the bucket size
exceeds maximum allocable continuous pages, bch_cache_set_alloc() will
fail and cache device registration will fail.

This patch allocates c->uuids by alloc_meta_bucket_pages(), and uses
ilog2(meta_bucket_pages(c)) to indicate order of c->uuids pages when
free it. When writing c->uuids to cache device, its size is decided
by meta_bucket_pages(c) * PAGE_SECTORS. Now c->uuids is properly handled
for bucket size > 8MB.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Currently the in-memory meta data like c->uuids or c->disk_buckets
are allocated by alloc_bucket_pages(). The macro alloc_bucket_pages()
calls __get_free_pages() to allocated continuous pages with order
indicated by ilog2(bucket_pages(c)),
 #define alloc_bucket_pages(gfp, c)                      \
     ((void *) __get_free_pages(__GFP_ZERO|gfp, ilog2(bucket_pages(c))))

The maximum order is defined as MAX_ORDER, the default value is 11 (and
can be overwritten by CONFIG_FORCE_MAX_ZONEORDER). In bcache code the
maximum bucket size width is 16bits, this is restricted both by KEY_SIZE
size and bucket_size size from struct cache_sb_disk. The maximum 16bits
width and power-of-2 value is (1<<15) in unit of sector (512byte). It
means the maximum value of bucket size in bytes is (1<<24) bytes a.k.a
4096 pages.

When the bucket size is set to maximum permitted value, ilog2(4096) is
12, which exceeds the default maximum order __get_free_pages() can
accepted, the failed pages allocation will fail cache set registration
procedure and print a kernel oops message for the exceeded pages order.

This patch introduces meta_bucket_pages(), meta_bucket_bytes(), and
alloc_bucket_pages() helper routines. meta_bucket_pages() indicates the
maximum pages can be allocated to meta data bucket, meta_bucket_bytes()
indicates the according maximum bytes, and alloc_bucket_pages() does
the pages allocation for meta bucket. Because meta_bucket_pages()
chooses the smaller value among the bucket size and MAX_ORDER_NR_PAGES,
it still works when MAX_ORDER overwritten by CONFIG_FORCE_MAX_ZONEORDER.

Following patches will use these helper routines to decide maximum pages
can be allocated for different meta data buckets. If the bucket size is
larger than meta_bucket_bytes(), the bcache registration can continue to
success, just the space more than meta_bucket_bytes() inside the bucket
is wasted. Comparing bcache failed for large bucket size, wasting some
space for meta data buckets is acceptable at this moment.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We have struct cache_sb_disk for on-disk super block already, it is
unnecessary to keep the in-memory super block format exactly mapping
to the on-disk struct layout.

This patch adds code comments to notice that struct cache_sb is not
exactly mapping to cache_sb_disk, and removes the useless member csum
and pad[5].

Although struct cache_sb does not belong to uapi, but there are still
some on-disk format related macros reference it and it is unncessary to
get rid of such dependency now. So struct cache_sb will continue to stay
in include/uapi/linux/bache.h for now.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Setting sb->first_bucket and checking sb->keys indeed are only for cache
device, it does not make sense to do them in read_super() for backing
device too.

This patch moves the related code piece into read_super_common()
explicitly for cache device and avoid the confusion.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The new added super block version BCACHE_SB_VERSION_BDEV_WITH_FEATURES
(5) BCACHE_SB_VERSION_CDEV_WITH_FEATURES value (6), is for the feature
set bits.

Devices have super block version equal to the new version will have
three new members for feature set bits in the on-disk super block,
        __le64                  feature_compat;
        __le64                  feature_incompat;
        __le64                  feature_ro_compat;

They are used for further new features which may introduce on-disk
format change, and avoid unncessary super block version increase.

The very basic features handling code skeleton is also initialized in
this patch.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In register_cache_set(), c is pointer to struct cache_set, and ca is
pointer to struct cache, if ca->sb.seq > c->sb.seq, it means this
registering cache has up to date version and other members, the in-
memory version and other members should be updated to the newer value.

But current implementation makes a cache set only has a single cache
device, so the above assumption works well except for a special case.
The execption is when a cache device new created and both ca->sb.seq and
c->sb.seq are 0, because the super block is never flushed out yet. In
the location for the following if() check,
2156         if (ca->sb.seq > c->sb.seq) {
2157                 c->sb.version           = ca->sb.version;
2158                 memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16);
2159                 c->sb.flags             = ca->sb.flags;
2160                 c->sb.seq               = ca->sb.seq;
2161                 pr_debug("set version = %llu\n", c->sb.version);
2162         }
c->sb.version is not initialized yet and valued 0. When ca->sb.seq is 0,
the if() check will fail (because both values are 0), and the cache set
version, set_uuid, flags and seq won't be updated.

The above problem is hiden for current code, because the bucket size is
compatible among different super block version. And the next time when
running cache set again, ca->sb.seq will be larger than 0 and cache set
super block version will be updated properly.

But if the large bucket feature is enabled,  sb->bucket_size is the low
16bits of the bucket size. For a power of 2 value, when the actual
bucket size exceeds 16bit width, sb->bucket_size will always be 0. Then
read_super_common() will fail because the if() check to
is_power_of_2(sb->bucket_size) is false. This is how the long time
hidden bug is triggered.

This patch modifies the if() check to the following way,
2156         if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) {
Then cache set's version, set_uuid, flags and seq will always be updated
corectly including for a new created cache device.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In bch_cache_set_alloc() there is a big if() checks combined by 11 items
together. When this big if() statement fails, it is difficult to tell
exactly which item fails indeed.

This patch disassembles this big if() checks into 11 single if() checks,
which makes code debug more easier.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The improperly set bucket or block size will trigger error in
read_super_common(). For large bucket size, a more accurate error message
for invalid bucket or block size is necessary.

This patch disassembles the combined if() checks into multiple single
if() check, and provide more accurate error message for each check
failure condition.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Later patches will introduce feature set bits to on-disk super block and
increase super block version. Current code in read_super() which reads
common part of super block for version BCACHE_SB_VERSION_CDEV and version
BCACHE_SB_VERSION_CDEV_WITH_UUID will be shared with the new version.

Therefore this patch moves the reusable part into read_super_common(),
this preparation patch will make later patches more simplier and only
focus on new feature set bits.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

offset_to_stripe() returns the stripe number (in type unsigned int) from
an offset (in type uint64_t) by the following calculation,
	do_div(offset, d->stripe_size);
For large capacity backing device (e.g. 18TB) with small stripe size
(e.g. 4KB), the result is 4831838208 and exceeds UINT_MAX. The actual
returned value which caller receives is 536870912, due to the overflow.

Indeed in bcache_device_init(), bcache_device->nr_stripes is limited in
range [1, INT_MAX]. Therefore all valid stripe numbers in bcache are
in range [0, bcache_dev->nr_stripes - 1].

This patch adds a upper limition check in offset_to_stripe(): the max
valid stripe number should be less than bcache_device->nr_stripes. If
the calculated stripe number from do_div() is equal to or larger than
bcache_device->nr_stripe, -EINVAL will be returned. (Normally nr_stripes
is less than INT_MAX, exceeding upper limitation doesn't mean overflow,
therefore -EOVERFLOW is not used as error code.)

This patch also changes nr_stripes' type of struct bcache_device from
'unsigned int' to 'int', and return value type of offset_to_stripe()
from 'unsigned int' to 'int', to match their exact data ranges.

All locations where bcache_device->nr_stripes and offset_to_stripe() are
referenced also get updated for the above type change.

Reported-and-tested-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1783075
Signed-off-by: Jens Axboe <axboe@kernel.dk>

For some block devices which large capacity (e.g. 8TB) but small io_opt
size (e.g. 8 sectors), in bcache_device_init() the stripes number calcu-
lated by,
	DIV_ROUND_UP_ULL(sectors, d->stripe_size);
might be overflow to the unsigned int bcache_device->nr_stripes.

This patch uses the uint64_t variable to store DIV_ROUND_UP_ULL()
and after the value is checked to be available in unsigned int range,
sets it to bache_device->nr_stripes. Then the overflow is avoided.

Reported-and-tested-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1783075
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.

This code was detected with the help of Coccinelle and, audited and
fixed manually.

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.

This code was detected with the help of Coccinelle and, audited and
fixed manually.

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Remove unneeded variable i in bch_dirty_init_thread().

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Using for_each_clear_bit() to simplify the code.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There are some meta data of bcache are allocated by multiple pages,
and they are used as bio bv_page for I/Os to the cache device. for
example cache_set->uuids, cache->disk_buckets, journal_write->data,
bset_tree->data.

For such meta data memory, all the allocated pages should be treated
as a single memory block. Then the memory management and underlying I/O
code can treat them more clearly.

This patch adds __GFP_COMP flag to all the location allocating >0 order
pages for the above mentioned meta data. Then their pages are treated
as compound pages now.

Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

registraion -> registration

Fixes: 0c8d3fce

 ("bcache: configure the asynchronous registertion to be experimental")
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Coly Li <colyli@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.9/drivers

Pull MD fix from Song.

* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md/raid5: use do_div() for 64 bit divisions in raid5_sync_request

We get compilation error on 32-bit architectures (e.g. m68k), as:

  ERROR: modpost: "__udivdi3" [drivers/md/raid456.ko] undefined!

Since 'sync_blocks' is defined as u64, use do_div() to fix this error.

Fixes: c911c46c

 ("md/raid456: convert macro STRIPE_* to RAID5_STRIPE_*")
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.9/drivers

Pull MD for 5.9 from Song.

* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md/raid10: avoid deadlock on recovery.
  raid: md_p.h: drop duplicated word in a comment
  md-cluster: fix rmmod issue when md_cluster convert bitmap to none
  md-cluster: fix safemode_delay value when converting to clustered bitmap
  md/raid5: support config stripe_size by sysfs entry
  md/raid5: set default stripe_size as 4096
  md/raid456: convert macro STRIPE_* to RAID5_STRIPE_*
  raid5: remove the meaningless check in raid5_make_request
  raid5: put the comment of clear_batch_ready to the right place
  raid5: call clear_batch_ready before set STRIPE_ACTIVE
  md: raid10: Fix compilation warning
  md: raid5: Fix compilation warning
  md: raid5-cache: Remove set but unused variable
  md: Fix compilation warning

When disk failure happens and the array has a spare drive, resync thread
kicks in and starts to refill the spare. However it may get blocked by
a retry thread that resubmits failed IO to a mirror and itself can get
blocked on a barrier raised by the resync thread.

Acked-by: Nigel Croxon <ncroxon@redhat.com>
Signed-off-by: Vitaly Mayatskikh <vmayatskikh@digitalocean.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

Drop the doubled word "the" in a comment.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: linux-raid@vger.kernel.org
Signed-off-by: Song Liu <songliubraving@fb.com>

update_array_info misses calling module_put when removing cluster bitmap.

steps to reproduce:
```
node1 # mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda
/dev/sdb
mdadm: array /dev/md0 started.
node1 # lsmod | egrep "dlm|md_|raid1"
md_cluster             28672  1
dlm                   212992  14 md_cluster
configfs               57344  2 dlm
raid1                  53248  1
md_mod                176128  2 raid1,md_cluster
node1 # mdadm -G /dev/md0 -b none
node1 # lsmod | egrep "dlm|md_|raid1"
md_cluster             28672  1 <== should be zero
dlm                   212992  9 md_cluster
configfs               57344  2 dlm
raid1                  53248  1
md_mod                176128  2 raid1,md_cluster
node1 # mdadm -G /dev/md0 -b clustered
node1 # lsmod | egrep "dlm|md_|raid1"
md_cluster             28672  2 <== increase
dlm                   212992  14 md_cluster
configfs               57344  2 dlm
raid1                  53248  1
md_mod                176128  2 raid1,md_cluster
node1 # mdadm -G /dev/md0 -b none
node1 # mdadm -G /dev/md0 -b clustered
node1 # lsmod | egrep "dlm|md_|raid1"
md_cluster             28672  3 <== increase
dlm                   212992  14 md_cluster
configfs               57344  2 dlm
raid1                  53248  1
md_mod                176128  2 raid1,md_cluster
```

Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Zhao Heming <heming.zhao@suse.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

When array convert to clustered bitmap, the safe_mode_delay doesn't
clean and vice versa. the /sys/block/mdX/md/safe_mode_delay keep original
value after changing bitmap type. In safe_delay_store(), the code forbids
setting mddev->safemode_delay when array is clustered. So in cluster-md
env, the expected safemode_delay value should be 0.

Reproducible steps:
```
node1 # mdadm --zero-superblock /dev/sd{b,c,d}
node1 # mdadm -C /dev/md0 -b internal -e 1.2 -n 2 -l mirror /dev/sdb /dev/sdc
node1 # cat /sys/block/md0/md/safe_mode_delay
0.204
node1 # mdadm -G /dev/md0 -b none
node1 # mdadm --grow /dev/md0 --bitmap=clustered
node1 # cat /sys/block/md0/md/safe_mode_delay
0.204  <== doesn't change, should ZERO for cluster-md

node1 # mdadm --zero-superblock /dev/sd{b,c,d}
node1 # mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sdb /dev/sdc
node1 # cat /sys/block/md0/md/safe_mode_delay
0.000
node1 # mdadm -G /dev/md0 -b none
node1 # cat /sys/block/md0/md/safe_mode_delay
0.000  <== doesn't change, should default value
```

Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Zhao Heming <heming.zhao@suse.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

Adding a new 'stripe_size' sysfs entry to set and show stripe_size.
stripe_size should not be bigger than PAGE_SIZE, and it requires to
be multiple of 4096. We can adjust stripe_size by writing value into
sysfs entry, likely, set stripe_size as 16KB:

          echo 16384 > /sys/block/md1/md/stripe_size

Show current stripe_size value:

          cat /sys/block/md1/md/stripe_size

For PAGE_SIZE is equal to 4096, 'stripe_size' can just be read.

Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

In RAID5, if issued bio size is bigger than stripe_size, it will be
split in the unit of stripe_size and process them one by one. Even
for size less then stripe_size, RAID5 also request data from disk at
least of stripe_size.

Nowdays, stripe_size is equal to the value of PAGE_SIZE. Since filesystem
usually issue bio in the unit of 4KB, there is no problem for PAGE_SIZE
as 4KB. But, for 64KB PAGE_SIZE, bio from filesystem requests 4KB data
while RAID5 issue IO at least stripe_size (64KB) each time. That will
waste resource of disk bandwidth and compute xor.

To avoding the waste, we want to make stripe_size configurable. This
patch just set default stripe_size as 4096. User can also set the value
bigger than 4KB for some special requirements, such as we know the
issued io size is more than 4KB.

To evaluate the new feature, we create raid5 device '/dev/md5' with
4 SSD disk and test it on arm64 machine with 64KB PAGE_SIZE.

1) We format /dev/md5 with mkfs.ext4 and mount ext4 with default
 configure on /mnt directory. Then, trying to test it by dbench with
 command: dbench -D /mnt -t 1000 10. Result show as:

 'stripe_size = 64KB'

  Operation      Count    AvgLat    MaxLat
  ----------------------------------------
  NTCreateX    9805011     0.021    64.728
  Close        7202525     0.001     0.120
  Rename        415213     0.051    44.681
  Unlink       1980066     0.079    93.147
  Deltree          240     1.793     6.516
  Mkdir            120     0.004     0.007
  Qpathinfo    8887512     0.007    37.114
  Qfileinfo    1557262     0.001     0.030
  Qfsinfo      1629582     0.012     0.152
  Sfileinfo     798756     0.040    57.641
  Find         3436004     0.019    57.782
  WriteX       4887239     0.021    57.638
  ReadX        15370483     0.005    37.818
  LockX          31934     0.003     0.022
  UnlockX        31933     0.001     0.021
  Flush         687205    13.302   530.088

 Throughput 307.799 MB/sec  10 clients  10 procs  max_latency=530.091 ms
 -------------------------------------------------------

 'stripe_size = 4KB'

  Operation      Count    AvgLat    MaxLat
  ----------------------------------------
  NTCreateX    11999166     0.021    36.380
  Close        8814128     0.001     0.122
  Rename        508113     0.051    29.169
  Unlink       2423242     0.070    38.141
  Deltree          300     1.885     7.155
  Mkdir            150     0.004     0.006
  Qpathinfo    10875921     0.007    35.485
  Qfileinfo    1905837     0.001     0.032
  Qfsinfo      1994304     0.012     0.125
  Sfileinfo     977450     0.029    26.489
  Find         4204952     0.019     9.361
  WriteX       5981890     0.019    27.804
  ReadX        18809742     0.004    33.491
  LockX          39074     0.003     0.025
  UnlockX        39074     0.001     0.014
  Flush         841022    10.712   458.848

 Throughput 376.777 MB/sec  10 clients  10 procs  max_latency=458.852 ms
 -------------------------------------------------------

 It show that setting stripe_size as 4KB has higher thoughput, i.e.
 (376.777 vs 307.799) and has smaller latency than that setting as 64KB.

 2) We try to evaluate IO throughput for /dev/md5 by fio with config:

 [4KB randwrite]
 direct=1
 numjob=2
 iodepth=64
 ioengine=libaio
 filename=/dev/md5
 bs=4KB
 rw=randwrite

 [64KB write]
 direct=1
 numjob=2
 iodepth=64
 ioengine=libaio
 filename=/dev/md5
 bs=1MB
 rw=write

 The result as follow:

               +                   +
               | stripe_size(64KB) | stripe_size(4KB)
 +----------------------------------------------------+
 4KB randwrite |     15MB/s        |      100MB/s
 +----------------------------------------------------+
 1MB write     |   1000MB/s        |      700MB/s

 The result show that when size of io is bigger than 4KB (64KB),
 64KB stripe_size has much higher IOPS. But for 4KB randwrite, that
 means, size of io issued to device are smaller, 4KB stripe_size
 have better performance.

Normally, default value (4096) can get relatively good performance.
But if each issued io is bigger than 4096, setting value more than
4096 may get better performance.

Here, we just set default stripe_size as 4096, and we will try to
support setting different stripe_size by sysfs interface in the
following patch.

Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

Convert macro STRIPE_SIZE, STRIPE_SECTORS and STRIPE_SHIFT to
RAID5_STRIPE_SIZE(), RAID5_STRIPE_SECTORS() and RAID5_STRIPE_SHIFT().

This patch is prepare for the following adjustable stripe_size.
It will not change any existing functionality.

Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

We can't guarntee the batched stripe to be set with STRIPE_HANDLE since
there are lots of functions could set the flag, such as sync_request,
ops_complete_* and end_{read,write}_request etc.

Also clear_batch_ready called in handle_stripe ensures the batched list
can't continue to be handled by handle_stripe.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

To make people understand the function well, let's put the comment to
the right place.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

We tried to only put the head sh of batch list to handle_list, then the
handle_stripe doesn't handle other members in the batch list. However,
we still got the calltrace in break_stripe_batch_list.

[593764.644269] stripe state: 2003
kernel: [593764.644299] ------------[ cut here ]------------
kernel: [593764.644308] WARNING: CPU: 12 PID: 856 at drivers/md/raid5.c:4625 break_stripe_batch_list+0x203/0x240 [raid456]
[...]
kernel: [593764.644363] Call Trace:
kernel: [593764.644370]  handle_stripe+0x907/0x20c0 [raid456]
kernel: [593764.644376]  ? __wake_up_common_lock+0x89/0xc0
kernel: [593764.644379]  handle_active_stripes.isra.57+0x35f/0x570 [raid456]
kernel: [593764.644382]  ? raid5_wakeup_stripe_thread+0x96/0x1f0 [raid456]
kernel: [593764.644385]  raid5d+0x480/0x6a0 [raid456]
kernel: [593764.644390]  ? md_thread+0x11f/0x160
kernel: [593764.644392]  md_thread+0x11f/0x160
kernel: [593764.644394]  ? wait_woken+0x80/0x80
kernel: [593764.644396]  kthread+0xfc/0x130
kernel: [593764.644398]  ? find_pers+0x70/0x70
kernel: [593764.644399]  ? kthread_create_on_node+0x70/0x70
kernel: [593764.644401]  ret_from_fork+0x1f/0x30

As we can see, the stripe was set with STRIPE_ACTIVE and STRIPE_HANDLE,
and only handle_stripe could set those flags then return. And since the
stipe was already in the batch list, we need to return earlier before
set the two flags.

And after dig a little about git history especially commit 3664847d


("md/raid5: fix a race condition in stripe batch"), it seems the batched
stipe still could be handled by handle_stipe, then handle_stipe needs to
return earlier if clear_batch_ready to return true.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

Remove the if statement around the call to sysfs_link_rdev() in
raid10_start_reshape() to avoid the compilation warning:

warning: suggest braces around empty body in an ‘if’ statement

when compiling with W=1.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

Remove the if statement around the calls to sysfs_link_rdev() to avoid
the compilation warning "suggest braces around empty body in an ‘if’
statement" when compiling with W=1.

Also fix function description comments to avoid kdoc format warnings.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

Remove the variable offset in r5c_tree_index() to avoid a "set but not
used" compilation warning when compiling with W=1.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

Remove the if statement around the calls to sysfs_link_rdev() to avoid
the compilation warnings:

warning: suggest braces around empty body in an ‘if’ statement

when compiling with W=1. For the call to sysfs_create_link() generating
the same warning, use the err variable to store the function result,
avoiding triggering another warning as the function is declared
as 'warn_unused_result'.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

Add a new max_active zones definition in the sysfs documentation.
This definition will be common for all devices utilizing the zoned block
device support in the kernel.

Export max_active_zones according to this new definition for NVMe Zoned
Namespace devices, ZAC ATA devices (which are treated as SCSI devices by
the kernel), and ZBC SCSI devices.

Add the new max_active_zones member to struct request_queue, rather
than as a queue limit, since this property cannot be split across stacking
drivers.

For SCSI devices, even though max active zones is not part of the ZBC/ZAC
spec, export max_active_zones as 0, signifying "no limit".

Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add a new max_open_zones definition in the sysfs documentation.
This definition will be common for all devices utilizing the zoned block
device support in the kernel.

Export max open zones according to this new definition for NVMe Zoned
Namespace devices, ZAC ATA devices (which are treated as SCSI devices by
the kernel), and ZBC SCSI devices.

Add the new max_open_zones member to struct request_queue, rather
than as a queue limit, since this property cannot be split across stacking
drivers.

Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.9/drivers

Pull MD fixes from Song.

* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md-cluster: fix wild pointer of unlock_all_bitmaps()
  md/raid5-cache: clear MD_SB_CHANGE_PENDING before flushing stripes
  md: fix deadlock causing by sysfs_notify
  md: improve io stats accounting
  md: raid0/linear: fix dereference before null check on pointer mddev

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes. Also, remove unnecessary
variable _datasize_.

This code was detected with the help of Coccinelle and, audited and
fixed manually.

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

During initialization of the DASD DIAG driver a request is issued
that has a bio structure that resides on the stack. With virtually
mapped kernel stacks this bio address might be in virtual storage
which is unsuitable for usage with the diag250 call.
In this case the device can not be set online using the DIAG
discipline and fails with -EOPNOTSUP.
In the system journal the following error message is presented:

dasd: X.X.XXXX Setting the DASD online with discipline DIAG failed
with rc=-95

Fix by allocating the bio structure instead of having it on the stack.

Fixes: ce3dc447

 ("s390: add support for virtually mapped kernel stacks")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: stable@vger.kernel.org #4.20
Signed-off-by: Jens Axboe <axboe@kernel.dk>