Merge tag 'renesas-dt4-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Fourth Round of Renesas ARM Based SoC DT Updates for v3.15" from Simon
Horman:

* r8a7791 (R-Car M2) based koelsch board
  - Add SDHI devices
  - Add ethernet

* r8a7791 (R-Car M2) SoC
  - Correct clock index for i2c5

* r8a7790 (R-Car H2) based lager board
  - Add ethernet

* tag 'renesas-dt4-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

:
  ARM: shmobile: Add SDHI devices for Koelsch DTS
  ARM: shmobile: Add SDHI devices to r8a7791 DTSI
  ARM: shmobile: r8a7791: fix clock index for i2c5
  ARM: shmobile: koelsch: add Ether DT support
  ARM: shmobile: r8a7791: add Ether DT support
  ARM: shmobile: lager: add Ether DT support
  ARM: shmobile: r8a7790: add Ether DT support

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-dt3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Third Round of Renesas ARM Based SoC DT Updates for v3.15" from Simon
Horman:

* r7s72100 SoC (RZ/A1H)
  - Add nodes for i2c controllers to DT

* r7s72100 (RZ/A1H) based Genmai board
  - genmai: adapt dts to use native i2c driver

* r8a7791 SoC (R-Car M2)
  - Remove superfluous interrupt-parents

* r8a7791 (R-Car M2) based Koelsch board
  - Add i2c2 bus to DT
  - Add DU device to DT

* r8a7790 SoC (R-Car H2)
  - Add i2c aliases
  - Remove superfluous interrupt-parents
  - Add QSPI node

* r8a7790 SoC (R-Car M2) based Lager
  - Add DU, SDHI0/1 and QSPI to DT

* r8a7778 SoC (R-Car M1)
  - Remove duplicate i2c nodes

* tag 'renesas-dt3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

:
  ARM: shmobile: genmai: adapt dts to use native i2c driver
  ARM: shmobile: r7s72100: add nodes for i2c controllers to dtsi
  ARM: shmobile: r8a7791: add i2c2 bus to koelsch dt
  ARM: shmobile: r8a7791: add i2c master nodes to dtsi
  ARM: shmobile: r8a7790: add i2c aliases to dtsi
  ARM: shmobile: r8a7790: remove superfluous interrupt-parents
  ARM: shmobile: r8a7791: remove superfluous interrupt-parents
  ARM: shmobile: koelsch-reference: Add DU device to DTS
  ARM: shmobile: lager: Add DU device to DTS
  ARM: shmobile: r8a7778 dtsi: Remove duplicate i2c nodes
  ARM: shmobile: lager: add SDHI0/2 support on DTS
  ARM: shmobile: lager dts: Add QSPI nodes
  ARM: shmobile: r8a7790 dtsi: Add QSPI node

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "arm: Xilinx Zynq dt patches for v3.15" from Michal Simek:

- Define fclk-enable property

* tag 'zynq-dt-for-3.15' of git://git.xilinx.com/linux-xlnx

:
  arm: dt: zynq: Add fclk-enable property to clkc node

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.15/dt-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "omap device tree changes for v3.15, part 2" from Tony Lindgren:

Part two of omap device tree changes enabling driver features
in the dts files.

* tag 'omap-for-v3.15/dt-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap

:
  ARM: dts: am335x-evmsk: enable dual_emac mode
  ARM: dts: DRA7: Add device nodes for ABB
  ARM: dts: OMAP4: Add device nodes for ABB
  ARM: dts: OMAP36xx: Add device node for ABB
  ARM: dts: am43x-epos-evm: add SD card hotplug support
  ARM: dts: am335x-evm: add SD card hotplug support
  ARM: dts: am437x gp-evm: add sd card dt nodes
  ARM: dts: omap5: added dt properties to adapt to the new phy framwork
  ARM: OMAP2+: Use pdata quirks for wl12xx on the AM335x EV-MSK
  ARM: dts: Update echi-omap DT binding example usage
  ARM: dts: Get rid of incompatible ids for hci-omap USB host nodes
  ARM: OMAP2+: Remove legacy_init_ehci_clk()
  ARM: dts: Add support for OMAP4 Gumstix DuoVero/Parlor

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'bcm2835-for-3.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/dt

Merge "ARM: bcm2835: DT changes for 3.15" from Stephen Warren:

A variety of features are added to the bcm2835 device trees:
- ARM PMU, for perf_event
- DMA controller
- I2S controller

A few cleanups are applied to the DTs too.

* tag 'bcm2835-for-3.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi

:
  ARM: bcm2835: fix clock DT node names
  ARM: bcm2835: node name unit address cleanup
  ARM: bcm2835: fix DT node sort order
  ARM: bcm2835: add I2S driver to device tree
  ARM: bcm2835: add dmaengine driver to device tree
  ARM: bcm2835: perf_event support for Raspberry-Pi

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "ARM: mach-bcm dt updates for 3.15" from Matt Porter:

- add BCM4708 dt support
- remove bcm11351-brt
- bcm281xx common clock support

* tag 'armsoc/for-3.15/dt' of git://github.com/broadcom/mach-bcm

:
  ARM: dts: remove bcm11351-brt.dts
  ARM: dts: Leave sdio1 as disabled on bcm28155-ap
  ARM: dts: bcm281xx: define real clocks
  ARM: BCM5301X: add dts files for BCM4708 SoC

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

Keystone DTS updates for 3.15 from Santosh Shilimkar:

- Add watchdog timer, timer64 and gpio device nodes
- Add LED device nodes
- Fixes for debugss, msmc clock nodes
- Add support for Keystone Lamarr and Edision SOC/EVM support
- Add NAND and AEMIF device nodes

* tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone

:
  ARM: dts: keystone: add AEMIF/NAND device entry
  ARM: dts: keystone: add support for k2 Edison SoC and EVM
  ARM: dts: keystone: add support for K2 Lamarr SoC and EVM
  ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs
  ARM: dts: keystone: update for supporting K2L/K2E EVMs
  ARM: dts: keystone: fix domain id for clkdebugsstrc
  ARM: dts: keystone: drop msmcsram clock node
  ARM: dts: k2hk-evm: rename clock node to clocks
  ARM: dts: k2hk-evm: add leds supports
  ARM: dts: keystone: add gpio device entry
  ARM: dts: keystone: add keystone timer entry
  ARM: dts: keystone: add watchdog entry

Signed-off-by: Olof Johansson <olof@lixom.net>

i.MX device tree changes for 3.15, take 2 from Shawn Guo:
 - Cleanup and device additions for imx27-phytec-phycard boards
 - eDMA and audio support for vf610-twr board
 - Minor updates and fixes for a couple of imx28 and imx5 boards

* tag 'imx-dt-3.15-2' of git://git.linaro.org/people/shawnguo/linux-2.6

:
  ARM: dts: vf610: i2c: Add eDMA support
  ARM: dts: imx27-phytec-phycore-som: Add USBOTG node
  ARM: dts: imx27-phytec-phycore-rdk: Add USBH2 node
  ARM: dts: i.MX27: Add USB nodes
  ARM: dts: vf610-twr: Add ADC support
  ARM: dts: mxs: Fix the RTC compatible prop on M28EVK
  ARM: dts: vf610-twr: Add simple-card support.
  ARM: dts: vf610-twr: Enable SGTL5000 codec.
  ARM: dts: vf610-twr: Enable SAI ALSA SoC DAI device
  ARM: dts: vf610: Add edma mux Tx and Rx support for SAI node.
  ARM: dts: vf610: lpuart: Add eDMA support
  ARM: dts: vf610: Add eDMA node
  ARM: dts: imx27-phytec-phycore: Add diagnostic PMIC LEDs
  ARM: dts: imx27-phytec-phycard-s-som: Rename file to .dtsi
  ARM: dts: i.MX51 babbage: Support diagnostic LED
  ARM: dts: imx28-tx28: Remove 'enable-active-low' property
  ARM: dts: mx53: Remove 'enable-active-low' property
  ARM: dts: imx27-phytec-phycard-s-rdk: Add pinctrl definitions for SDHC2
  ARM: dts: imx27-phytec-phycard-s-som: Add NFC node
  ARM: dts: imx27-phytec-phycard-s-som: Sort entries

Signed-off-by: Olof Johansson <olof@lixom.net>

i.MX6 device tree changes for 3.15, take 2 from Shawn Guo:
 - Add USB, GPMI and SATA support for imx6q-phytec board
 - Update imx6sl-evk board support regarding PFUZE100, audio and
   LED etc.
 - Minor updates on a few imx6qdl boards

* tag 'imx6-dt-3.15-2' of git://git.linaro.org/people/shawnguo/linux-2.6

:
  ARM: dts: imx6q-phytec: Added SATA Support
  ARM: dts: imx6q-phytec: Added GPMI-NAND Support
  ARM: dts: imx6q-phytec: Added USB_HOST Support
  ARM: dts: imx6q-phytec: Added USB_OTG Support
  ARM: dts: imx6sl-evk: Keep VGEN1 regulator always enabled
  ARM: dts: imx6qdl-sabreauto: Support debug LED
  ARM: dts: imx6q: add 852MHz setpoint for CPU freq
  ARM: dts: imx6qdl-wandboard: use GPIO_6 for FEC interrupt
  ARM: dts: imx6sl-evk: Add debug LED support
  ARM: dts: imx6qdl-sabreauto: Add PFUZE100 support
  ARM: dts: imx6sl-evk: Add audio support
  ARM: dts: imx6sl-evk: Add PFUZE100 support
  ARM: dts: imx6qdl-sabresd: correct gpio key's active state

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ux500-dt-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

A set of device tree-related cleanups for the ux500 platform from Linus
Walleij:

- Rename SSP/SPI clocks to the name found in the hardware
  reference manual. (Also includes a rename in the U300
  device tree file.)
- Delete dead non-DT code.
- Drop now completely unused GPIO definition header file.
- Delete all hardcoded IRQ number assignments. This hits
  MFD a bit so the patch has been ACKed by Lee Jones from
  the MFD side.

* tag 'ux500-dt-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson

:
  mfd: dbx500/abx500: root out hardcoded IRQ assignments
  ARM: ux500: drop a chunk of GPIO definitions
  ARM: ux500: skip GIC CPU and dist address checks
  ARM: ux500: delete pointless DT config option
  ARM: u300: switch SSP/SPI clock name to "SSPCLK"
  ARM: ux500: switch SSP/SPI clock name to "SSPCLK"

Signed-off-by: Olof Johansson <olof@lixom.net>

Allwinner DT patches for 3.15, take 1 from Maxime Ripard:
  - Add SPI controllers for all the SoCs
  - Add various missing aliases
  - Add USB clocks nodes
  - Addition of the GMAC support
  - Introduction of the pcDuino board
  - A few DT cleanup patches: change of compatibles,

* tag 'sunxi-dt-for-3.15' of https://github.com/mripard/linux

: (33 commits)
  ARM: sun6i: dt: Fix mod0 compatible
  ARM: dts: sun7i: Enable the SPI controllers of the A20-olinuxino-micro
  ARM: dt: sun7i: Add SPI muxing options
  ARM: dt: sun5i: Add A13 SPI controller nodes
  ARM: dt: sun5i: Add A10s SPI controller nodes
  ARM: dt: sun4i: Add A10 SPI controller nodes
  ARM: dt: sun7i: Add A20 SPI controller nodes
  ARM: sun4i: dt: Remove grouping + simple-bus compatible for regulators
  ARM: sunxi: dt: Convert to the new clock compatibles
  ARM: sun7i: add arch timer node
  ARM: sun7i: dt: Add bindings for USB clocks
  ARM: sun5i: dt: Add bindings for USB clocks
  ARM: sun4i: dt: Add bindings for USB clocks
  ARM: dts: sun7i: Add ethernet alias for GMAC
  ARM: dts: sun7i: a20-olinuxino-micro: Enable GMAC instead of EMAC
  ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC
  ARM: dts: sun7i: cubietruck: Enable the GMAC
  ARM: dts: sun7i: Add pin muxing options for the GMAC
  ARM: dts: sun7i: Add GMAC controller node to sun7i DTSI
  ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'exynos-clk' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Samsung exynos clock related DT updates for v3.15 from Kukjim Kim:

- use macros instead of hard coded numbers for clock bindings

NOTE: this is based on v3.15-next/dt-samsung

* tag 'exynos-clk' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: use macros in clock bindings for exynos5440
  ARM: dts: use macros in clock bindings for exynos5420
  ARM: dts: use macros in clock bindings for exynos5250
  ARM: dts: use macros in clock bindings for exynos4

Merge tag 'samsung-dt' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Samsung DT updates for v3.15 from Kukjin Kim:

For exynos4412
- update vdd_arm voltage range for odroidx board

For exynos5250
- add PMU sysreg node and update watchdog node
- re-organize RTC status
- add max77686 pmic node for smdk5250

For exynos5420
- add PMU sysreg, i2s, adma and watchdog nodes
- re-organize RTC status
- add fixed voltage regulators and regulator nodes
  for smdk5420
- add PMIC, GPIO based wake up key and vmmc-supply
  support for arndale-octa board

* tag 'samsung-dt' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

:
  ARM: dts: Add vmmc-supply to MMC on arndale-octa board
  ARM: dts: Add wake up key to arndale-octa board
  ARM: dts: Add PMIC support to arndale-octa board
  ARM: dts: Add fixed voltage regulators to smdk5420
  ARM: dts: Add I2S nodes to exynos5420
  ARM: dts: Add ADMA node to exynos5420
  ARM: dts: Re-organize RTC status for exynos5250
  ARM: dts: Re-organize RTC status for exynos5420
  ARM: dts: Add regulator entries to smdk5420
  ARM: dts: add max77686 pmic node for smdk5250
  ARM: dts: update vdd_arm voltage range for exynos4412 based boards
  ARM: dts: update watchdog device nodes for exynos5250 and exynos5420
  ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

OMAP device tree changes from Tony Lindgren:

Device tree related changes for omaps with minor code
changes also to platform data quirks that are still needed
for some features.

* tag 'omap-for-v3.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (60 commits)
  ARM: dts: omap4+: Add DMM bindings
  ARM: dts: am43x-gp-evm: Add matrix gpio keys.
  ARM: dts: am43xx: add support for parallel NAND flash
  ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
  ARM: dts: am335x-evm: NAND: update MTD partition table
  ARM: OMAP2+: gpmc: update gpmc_hwecc_bch_capable() for new platforms and ECC schemes
  ARM: dts: omap3-gta04: Add bma180 accelerometer
  ARM: dts: omap3-gta04: Enable mmc2 for wifi
  ARM: dts: omap3-gta04: Add basic sound support
  ARM: dts: omap3-gta04: Add twl4030 charger
  ARM: dts: omap3-gta04: Add touchscreen properties
  ARM: dts: omap3-gta04: Add support for magnetometer
  ARM: dts: am437x-gp-evm: Enable gpio.
  ARM: dts: am437x-gp-evm: Add pwm backlight support.
  ARM: dts: am437x-gp-evm: Add gp dts.
  ARM: dts: am43x-epos-evm: Add SPI data.
  ARM: dts: am43x-epos-evm: Add I2C2 data.
  pinctrl: am43xx: dt-bindings: add MUX_MODE8
  ARM: dts: am43x-epos-evm: Add pwm backlight support.
  ARM: dts: am4372: Add pwm-cells property for ecap device.
  ...

EVM board provides two Ethernet ports, this patch sets them into
dual_emac mode to provide two independent network interfaces.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add ABB device nodes for DRA7 family of devices. Data is based on
DRA7 Technical Reference Manual revision I (Sept 2013)

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add ABB device nodes for OMAP443x family of devices. abb_iva is
populated, but disabled as it is not used on current OMAP443x family,
but the node is used on OMAP446x family. Data is based on OMAP443x
Technical Reference Manual revision AN (April 2013).

ABB device nodes for OMAP4460 device Data is based on OMAP4460
Technical Reference Manual revision Z (April 2013)

[nm@ti.com: co-developer]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add ABB device node for OMAP36xx family of devices. Data is based on
OMAP36XX Technical Reference Manual revision AB (Dec 2012).

[nm@ti.com: co-developer]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add card detect gpio for SD card slot and include dt gpio header.

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add card detect gpio for SD card slot

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

enable sd card slot on am437x-gp-evm

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Added device tree bindings for dwc3, usb2 and usb3 PHYs. The documentation
of these can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt
and Documentation/devicetree/bindings/phy/ti-phy.txt.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The BCM11351 BRT board will never see the light of day. Remove the BRT
dts since it is not maintainable.

Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Christian Daudt <bcm@fixthebug.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>

Enable the WiLink6 connected to mmc2.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Remove non-compatible id from examples.

CC: Alan Stern <stern@rowland.harvard.edu>
CC: Nishant Menon <nm@ti.com>
CC: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The OMAP EHCI and OHCI controllers are not compatible with drivers
other than "ti,ehci-omap" and "ti,ohci-omap3" respectively, so get
rid of the incompatible ids.

CC: Alan Stern <stern@rowland.harvard.edu>
CC: Nishant Menon <nm@ti.com>
CC: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The necessary clock phandle for the EHCI clock is now provided
via device tree so we no longer need this legacy method.

Update the omap4-panda and omap5-uevm board DTS to provide the
necessary EHCI PHY clock information.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Gumstix DuoVero is an OMAP4430-based Computer On Module.
Parlor is one of the available expansion board.

Tested features:
- GPMC ethernet
- HSUSB2 and OTG
- Audio out
- WiFi and Bluetooth (w2cbw0015 SDIO module)
- LED and button

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The DBx500 and ABx500 should be getting their IRQs from the
device tree and nowhere else. Get rid of all the static assignments
everywhere, delete it from the driver, platform data and the
board files in one swift strike.

Lots of cross-dependencies in the MFD drivers for PRCMU and
AB8500 makes it necessary to strike everywhere at once to
eradicate IRQs passed as resources and platform data to the left
and right around the platform.

Cc: Mark Brown <broonie@kernel.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The Ux500 GPIOs are now assigned dynamically from the device tree.
Drop this table of static assignments.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'for_3.15/dts_signed' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.15/dt

Add craneboard devices
Add more N900 devices
Add am43x-epos-evm and am437x-gp-evm devices
Add OMAP4 DMM devices

Conflicts:
	arch/arm/boot/dts/am43x-epos-evm.dts
	arch/arm/boot/dts/dra7.dtsi

Add Dynamic Memory Manager (DMM) bindings for OMAP4 and OMAP5 and DRA7x devices.
DMM only requires address and irq information.

Add documentation for the DMM bindings.

Originally worked on by Andy Gross <andygro@gmail.com>

Cc: Andy Gross <andygro@gmail.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>

Add gpio keys node for am43x gp evm.

Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>

This patch:
 - enables GPMC h/w and ELM h/w engine for AM43xx devices (am4372.dtsi)
 - adds pinmux and DT node for Micron 4K-paged x8 NAND device (MT29F4G08AB)
   present on following boards:

   am43x-epos-evm:
	On this board, NAND Flash control lines are muxed with QSPI, Thus only
        one of the two can be used at a time. Selection is controlled by:
        (a) dynamically driving following GPIO pin from software
            GPMC_A0(GPIO) == 0 NAND is selected (default)
            GPMC_A0(GPIO) == 1 eMMC is selected

Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch updated MTD/NAND DT node binding to replace deprecated bindings
as per following commit.
    commit ac65caf5


    ARM: OMAP2+: cleaned-up DT support of various ECC schemes
    Also Refer: Documentation/devicetree/bindings/mtd/gpmc-nand.txt

Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch has following updates, specific to MTD/NAND DT
 - update MTD NAND partition table to keep compatibility between
   different boards and mainline u-boot.
 - prefix 'NAND.' in names of NAND device MTD partitions to differentiate them
   from other MTD device partitions (like NOR and QSPI)
               Partition_Name            Partition_Size
    /dev/mtd0  NAND.SPL                  1 block-size*
    /dev/mtd1  NAND.SPL.backup1          1 block-size*
    /dev/mtd2  NAND.SPL.backup2          1 block-size*
    /dev/mtd3  NAND.SPL.backup3          1 block-size*
    /dev/mtd5  NAND.u-boot-spl-os        2 block-size* [for falcon boot]
    /dev/mtd4  NAND.u-boot               1 MB
    /dev/mtd6  NAND.u-boot-env           1 block-size*
    /dev/mtd7  NAND.u-boot-env.backup1   1 block-size*
    /dev/mtd8  NAND.kernel               till 0xA00000
    /dev/mtd9  NAND.file-system          till end of device

* am335x-evm uses NAND device with block-size=128KiB

Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch
 - refactors gpmc_hwecc_bch_capable()
 - add checks for new platforms like dra7xx, am43xx
 - add checks for OMAP3 SoC, w.r.t. new ECC schemes spawned in following commit:
    commit ac65caf5


    ARM: OMAP2+: cleaned-up DT support of various ECC schemes

Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add node for bma180 driver.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This requires vaux4.

Reset line isn't used yet, so wifi isn't reliable.
But it does work once per boot.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This adds basic sound support for gta04 board.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>