- Apr 10, 2024
-
-
Petr Oros authoredcommit 8edfc7a4 upstream. ice_port_vlan_on/off() was introduced in commit 2946204b ("ice: implement bridge port vlan"). But ice_port_vlan_on() incorrectly assigns ena_rx_filtering to inner_vlan_ops in DVM mode. This causes an error when rx_filtering cannot be enabled in legacy mode. Reproducer: echo 1 > /sys/class/net/$PF/device/sriov_numvfs ip link set $PF vf 0 spoofchk off trust on vlan 3 dmesg: ice 0000:41:00.0: failed to enable Rx VLAN filtering for VF 0 VSI 9 during VF rebuild, error -95 Fixes: 2946204b ("ice: implement bridge port vlan") Signed-off-by:
Petr Oros <poros@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Antoine Tenart authored
commit ed4cccef upstream. If packets are GROed with fraglist they might be segmented later on and continue their journey in the stack. In skb_segment_list those skbs can be reused as-is. This is an issue as their destructor was removed in skb_gro_receive_list but not the reference to their socket, and then they can't be orphaned. Fix this by also removing the reference to the socket. For example this could be observed, kernel BUG at include/linux/skbuff.h:3131! (skb_orphan) RIP: 0010:ip6_rcv_core+0x11bc/0x19a0 Call Trace: ipv6_list_rcv+0x250/0x3f0 __netif_receive_skb_list_core+0x49d/0x8f0 netif_receive_skb_list_internal+0x634/0xd40 napi_complete_done+0x1d2/0x7d0 gro_cell_poll+0x118/0x1f0 A similar construction is found in skb_gro_receive, apply the same change there. Fixes: 5e10da53 ("skbuff: allow 'slow_gro' for skb carring sock reference") Signed-off-by:
Antoine Tenart <atenart@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Antoine Tenart authored
commit 0fb101be upstream. UDP tunnel packets can't be GRO in-between their endpoints as this causes different issues. The UDP GRO fwd vxlan tests were relying on this and their expectations have to be fixed. We keep both vxlan tests and expected no GRO from happening. The vxlan UDP GRO bench test was removed as it's not providing any valuable information now. Fixes: a062260a ("selftests: net: add UDP GRO forwarding self-tests") Signed-off-by:
Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Michael Krummsdorf authored
commit 625aefac upstream. The switch has 4 ports with 2 internal PHYs, but ports are numbered up to 6, with ports 0, 1, 5 and 6 being usable. Fixes: 71d94a43 ("net: dsa: mv88e6xxx: add support for MV88E6020 switch") Signed-off-by:
Michael Krummsdorf <michael.krummsdorf@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240326123655.40666-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Aleksandr Mishin authored
commit 96c15594 upstream. In lan8814_get_sig_rx() and lan8814_get_sig_tx() ptp_parse_header() may return NULL as ptp_header due to abnormal packet type or corrupted packet. Fix this bug by adding ptp_header check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: ece19502 ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by:
Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240329061631.33199-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Wei Fang authored
commit cbc17e78 upstream. Setting mac_managed_pm during interface up is too late. In situations where the link is not brought up yet and the system suspends the regular PHY power management will run. Since the FEC ETHEREN control bit is cleared (automatically) on suspend the controller is off in resume. When the regular PHY power management resume path runs in this context it will write to the MII_DATA register but nothing will be transmitted on the MDIO bus. This can be observed by the following log: fec 5b040000.ethernet eth0: MDIO read timeout Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: dpm_run_callback(): mdio_bus_phy_resume+0x0/0xc8 returns -110 Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: failed to resume: error -110 The data written will however remain in the MII_DATA register. When the link later is set to administrative up it will trigger a call to fec_restart() which will restore the MII_SPEED register. This triggers the quirk explained in f166f890 ("net: ethernet: fec: Replace interrupt driven MDIO with polled IO") causing an extra MII_EVENT. This extra event desynchronizes all the MDIO register reads, causing them to complete too early. Leading all reads to read as 0 because fec_enet_mdio_wait() returns too early. When a Microchip LAN8700R PHY is connected to the FEC, the 0 reads causes the PHY to be initialized incorrectly and the PHY will not transmit any ethernet signal in this state. It cannot be brought out of this state without a power cycle of the PHY. Fixes: 557d5dc8 ("net: fec: use mac-managed PHY PM") Closes: https://lore.kernel.org/netdev/1f45bdbe-eab1-4e59-8f24-add177590d27@actia.se/ Signed-off-by:
Wei Fang <wei.fang@nxp.com>
[jernberg: commit message]
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Link: https://lore.kernel.org/r/20240328155909.59613-2-john.ernberg@actia.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Duanqiang Wen authored
commit c644920c upstream. txgbe clkdev shortened clk_name, so i2c_dev info_name also need to shorten. Otherwise, i2c_dev cannot initialize clock. Fixes: e30cef00 ("net: txgbe: fix clk_name exceed MAX_DEV_ID limits") Signed-off-by:
Duanqiang Wen <duanqiangwen@net-swift.com>
Link: https://lore.kernel.org/r/20240402021843.126192-1-duanqiangwen@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Horatiu Vultur authored
commit de99e1ea upstream. There are 2 issues with the blamed commit. 1. When the phy is initialized, it would enable the disabled of UDPv4 checksums. The UDPv6 checksum is already enabled by default. So when 1-step is configured then it would clear these flags. 2. After the 1-step is configured, then if 2-step is configured then the 1-step would be still configured because it is not clearing the flag. So the sync frames will still have origin timestamps set. Fix this by reading first the value of the register and then just change bit 12 as this one determines if the timestamp needs to be inserted in the frame, without changing any other bits. Fixes: ece19502 ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Link: https://lore.kernel.org/r/20240402071634.2483524-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Piotr Wejman authored
commit b3da86d4 upstream. The driver should ensure that same priority is not mapped to multiple rx queues. From DesignWare Cores Ethernet Quality-of-Service Databook, section 17.1.29 MAC_RxQ_Ctrl2: "[...]The software must ensure that the content of this field is mutually exclusive to the PSRQ fields for other queues, that is, the same priority is not mapped to multiple Rx queues[...]" Previously rx_queue_priority() function was: - clearing all priorities from a queue - adding new priorities to that queue After this patch it will: - first assign new priorities to a queue - then remove those priorities from all other queues - keep other priorities previously assigned to that queue Fixes: a8f5102a ("net: stmmac: TX and RX queue priority configuration") Fixes: 2142754f ("net: stmmac: Add MAC related callbacks for XGMAC2") Signed-off-by:
Piotr Wejman <piotrwejman90@gmail.com>
Link: https://lore.kernel.org/r/20240401192239.33942-1-piotrwejman90@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Eric Dumazet authored
commit 7eb32236 upstream. qdisc_tree_reduce_backlog() is called with the qdisc lock held, not RTNL. We must use qdisc_lookup_rcu() instead of qdisc_lookup() syzbot reported: WARNING: suspicious RCU usage 6.1.74-syzkaller #0 Not tainted ----------------------------- net/sched/sch_api.c:305 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by udevd/1142: #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:306 [inline] #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:747 [inline] #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: net_tx_action+0x64a/0x970 net/core/dev.c:5282 #1: ffff888171861108 (&sch->q.lock){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:350 [inline] #1: ffff888171861108 (&sch->q.lock){+.-.}-{2:2}, at: net_tx_action+0x754/0x970 net/core/dev.c:5297 #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:306 [inline] #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:747 [inline] #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: qdisc_tree_reduce_backlog+0x84/0x580 net/sched/sch_api.c:792 stack backtrace: CPU: 1 PID: 1142 Comm: udevd Not tainted 6.1.74-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call Trace: <TASK> [<ffffffff85b85f14>] __dump_stack lib/dump_stack.c:88 [inline] [<ffffffff85b85f14>] dump_stack_lvl+0x1b1/0x28f lib/dump_stack.c:106 [<ffffffff85b86007>] dump_stack+0x15/0x1e lib/dump_stack.c:113 [<ffffffff81802299>] lockdep_rcu_suspicious+0x1b9/0x260 kernel/locking/lockdep.c:6592 [<ffffffff84f0054c>] qdisc_lookup+0xac/0x6f0 net/sched/sch_api.c:305 [<ffffffff84f037c3>] qdisc_tree_reduce_backlog+0x243/0x580 net/sched/sch_api.c:811 [<ffffffff84f5b78c>] pfifo_tail_enqueue+0x32c/0x4b0 net/sched/sch_fifo.c:51 [<ffffffff84fbcf63>] qdisc_enqueue include/net/sch_generic.h:833 [inline] [<ffffffff84fbcf63>] netem_dequeue+0xeb3/0x15d0 net/sched/sch_netem.c:723 [<ffffffff84eecab9>] dequeue_skb net/sched/sch_generic.c:292 [inline] [<ffffffff84eecab9>] qdisc_restart net/sched/sch_generic.c:397 [inline] [<ffffffff84eecab9>] __qdisc_run+0x249/0x1e60 net/sched/sch_generic.c:415 [<ffffffff84d7aa96>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125 [<ffffffff84d85d29>] net_tx_action+0x7c9/0x970 net/core/dev.c:5313 [<ffffffff85e002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:616 [<ffffffff81568bca>] invoke_softirq kernel/softirq.c:447 [inline] [<ffffffff81568bca>] __irq_exit_rcu+0xca/0x230 kernel/softirq.c:700 [<ffffffff81568ae9>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:712 [<ffffffff85b89f52>] sysvec_apic_timer_interrupt+0x42/0x90 arch/x86/kernel/apic/apic.c:1107 [<ffffffff85c00ccb>] asm_sysvec_apic_timer_interrupt+0x1b/0x20 arch/x86/include/asm/idtentry.h:656 Fixes: d636fc5d ("net: sched: add rcu annotations around qdisc->qdisc_sleeping") Reported-by:
syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240402134133.2352776-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Christophe JAILLET authored
commit c120209b upstream. The definition and declaration of sja1110_pcs_mdio_write_c45() don't have parameters in the same order. Knowing that sja1110_pcs_mdio_write_c45() is used as a function pointer in 'sja1105_info' structure with .pcs_mdio_write_c45, and that we have: int (*pcs_mdio_write_c45)(struct mii_bus *bus, int phy, int mmd, int reg, u16 val); it is likely that the definition is the one to change. Found with cppcheck, funcArgOrderDifferent. Fixes: ae271547 ("net: dsa: sja1105: C45 only transactions for PCS") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/ff2a5af67361988b3581831f7bd1eddebfb4c48f.1712082763.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Eric Dumazet authored
commit d313eb8b upstream. syzbot found that tcf_skbmod_dump() was copying four bytes from kernel stack to user space [1]. The issue here is that 'struct tc_skbmod' has a four bytes hole. We need to clear the structure before filling fields. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 copy_to_iter include/linux/uio.h:196 [inline] simple_copy_to_iter net/core/datagram.c:532 [inline] __skb_datagram_iter+0x185/0x1000 net/core/datagram.c:420 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546 skb_copy_datagram_msg include/linux/skbuff.h:4050 [inline] netlink_recvmsg+0x432/0x1610 net/netlink/af_netlink.c:1962 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x2c4/0x340 net/socket.c:1068 __sys_recvfrom+0x35a/0x5f0 net/socket.c:2242 __do_sys_recvfrom net/socket.c:2260 [inline] __se_sys_recvfrom net/socket.c:2256 [inline] __x64_sys_recvfrom+0x126/0x1d0 net/socket.c:2256 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was stored to memory at: pskb_expand_head+0x30f/0x19d0 net/core/skbuff.c:2253 netlink_trim+0x2c2/0x330 net/netlink/af_netlink.c:1317 netlink_unicast+0x9f/0x1260 net/netlink/af_netlink.c:1351 nlmsg_unicast include/net/netlink.h:1144 [inline] nlmsg_notify+0x21d/0x2f0 net/netlink/af_netlink.c:2610 rtnetlink_send+0x73/0x90 net/core/rtnetlink.c:741 rtnetlink_maybe_send include/linux/rtnetlink.h:17 [inline] tcf_add_notify net/sched/act_api.c:2048 [inline] tcf_action_add net/sched/act_api.c:2071 [inline] tc_ctl_action+0x146e/0x19d0 net/sched/act_api.c:2119 rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2559 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6613 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xf4c/0x1260 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10df/0x11f0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was stored to memory at: __nla_put lib/nlattr.c:1041 [inline] nla_put+0x1c6/0x230 lib/nlattr.c:1099 tcf_skbmod_dump+0x23f/0xc20 net/sched/act_skbmod.c:256 tcf_action_dump_old net/sched/act_api.c:1191 [inline] tcf_action_dump_1+0x85e/0x970 net/sched/act_api.c:1227 tcf_action_dump+0x1fd/0x460 net/sched/act_api.c:1251 tca_get_fill+0x519/0x7a0 net/sched/act_api.c:1628 tcf_add_notify_msg net/sched/act_api.c:2023 [inline] tcf_add_notify net/sched/act_api.c:2042 [inline] tcf_action_add net/sched/act_api.c:2071 [inline] tc_ctl_action+0x1365/0x19d0 net/sched/act_api.c:2119 rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2559 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6613 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xf4c/0x1260 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10df/0x11f0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Local variable opt created at: tcf_skbmod_dump+0x9d/0xc20 net/sched/act_skbmod.c:244 tcf_action_dump_old net/sched/act_api.c:1191 [inline] tcf_action_dump_1+0x85e/0x970 net/sched/act_api.c:1227 Bytes 188-191 of 248 are uninitialized Memory access of size 248 starts at ffff888117697680 Data copied to user address 00007ffe56d855f0 Fixes: 86da71b5 ("net_sched: Introduce skbmod action") Signed-off-by:
Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240403130908.93421-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Will Deacon authored
commit 4c36a156 upstream. When zapping a table entry in stage2_try_break_pte(), we issue range TLB invalidation for the region that was mapped by the table. However, we neglect to align the base address down to the granule size and so if we ended up reaching the table entry via a misaligned address then we will accidentally skip invalidation for some prefix of the affected address range. Align 'ctx->addr' down to the granule size when performing TLB invalidation for an unmapped table in stage2_try_break_pte(). Cc: Raghavendra Rao Ananta <rananta@google.com> Cc: Gavin Shan <gshan@redhat.com> Cc: Shaoqin Huang <shahuang@redhat.com> Cc: Quentin Perret <qperret@google.com> Fixes: defc8cc7 ("KVM: arm64: Invalidate the table entries upon a range") Signed-off-by:
Will Deacon <will@kernel.org>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240327124853.11206-5-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Borislav Petkov (AMD) authored
commit 0e110732 upstream. The srso_alias_untrain_ret() dummy thunk in the !CONFIG_MITIGATION_SRSO case is there only for the altenative in CALL_UNTRAIN_RET to have a symbol to resolve. However, testing with kernels which don't have CONFIG_MITIGATION_SRSO enabled, leads to the warning in patch_return() to fire: missing return thunk: srso_alias_untrain_ret+0x0/0x10-0x0: eb 0e 66 66 2e WARNING: CPU: 0 PID: 0 at arch/x86/kernel/alternative.c:826 apply_returns (arch/x86/kernel/alternative.c:826 Put in a plain "ret" there so that gcc doesn't put a return thunk in in its place which special and gets checked. In addition: ERROR: modpost: "srso_alias_untrain_ret" [arch/x86/kvm/kvm-amd.ko] undefined! make[2]: *** [scripts/Makefile.modpost:145: Module.symvers] Chyba 1 make[1]: *** [/usr/src/linux-6.8.3/Makefile:1873: modpost] Chyba 2 make: *** [Makefile:240: __sub-make] Chyba 2 since !SRSO builds would use the dummy return thunk as reported by petr.pisar@atlas.cz, https://bugzilla.kernel.org/show_bug.cgi?id=218679 . Reported-by:
kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202404020901.da75a60f-oliver.sang@intel.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/202404020901.da75a60f-oliver.sang@intel.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Jakub Sitnicki authored
commit ff910599 upstream. syzkaller started using corpuses where a BPF tracing program deletes elements from a sockmap/sockhash map. Because BPF tracing programs can be invoked from any interrupt context, locks taken during a map_delete_elem operation must be hardirq-safe. Otherwise a deadlock due to lock inversion is possible, as reported by lockdep: CPU0 CPU1 ---- ---- lock(&htab->buckets[i].lock); local_irq_disable(); lock(&host->lock); lock(&htab->buckets[i].lock); <Interrupt> lock(&host->lock); Locks in sockmap are hardirq-unsafe by design. We expects elements to be deleted from sockmap/sockhash only in task (normal) context with interrupts enabled, or in softirq context. Detect when map_delete_elem operation is invoked from a context which is _not_ hardirq-unsafe, that is interrupts are disabled, and bail out with an error. Note that map updates are not affected by this issue. BPF verifier does not allow updating sockmap/sockhash from a BPF tracing program today. Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Reported-by:
xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Reported-by: <syzbot+bc922f476bd65abbd466@syzkaller.appspotmail.com>
Reported-by: <syzbot+d4066896495db380182e@syzkaller.appspotmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: <syzbot+d4066896495db380182e@syzkaller.appspotmail.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=d4066896495db380182e
Closes: https://syzkaller.appspot.com/bug?extid=bc922f476bd65abbd466
Link: https://lore.kernel.org/bpf/20240402104621.1050319-1-jakub@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Christophe JAILLET authored
commit de3f64b7 upstream. If an load_nls_xxx() function fails a few lines above, the 'sbi->bdi_id' is still 0. So, in the error handling path, we will call ida_simple_remove(..., 0) which is not allocated yet. In order to prevent a spurious "ida_free called for id=0 which is not allocated." message, tweak the error handling path and add a new label. Fixes: 0fd16957 ("fs: Add VirtualBox guest shared folder (vboxsf) support") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d09eaaa4e2e08206c58a1a27ca9b3e81dc168773.1698835730.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Eric Dumazet authored
commit 0c83842d upstream. I got multiple syzbot reports showing old bugs exposed by BPF after commit 20f2505f ("bpf: Try to avoid kzalloc in cgroup/{s,g}etsockopt") setsockopt() @optlen argument should be taken into account before copying data. BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in do_replace net/ipv4/netfilter/ip_tables.c:1111 [inline] BUG: KASAN: slab-out-of-bounds in do_ipt_set_ctl+0x902/0x3dd0 net/ipv4/netfilter/ip_tables.c:1627 Read of size 96 at addr ffff88802cd73da0 by task syz-executor.4/7238 CPU: 1 PID: 7238 Comm: syz-executor.4 Not tainted 6.9.0-rc2-next-20240403-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] do_replace net/ipv4/netfilter/ip_tables.c:1111 [inline] do_ipt_set_ctl+0x902/0x3dd0 net/ipv4/netfilter/ip_tables.c:1627 nf_setsockopt+0x295/0x2c0 net/netfilter/nf_sockopt.c:101 do_sock_setsockopt+0x3af/0x720 net/socket.c:2311 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x72/0x7a RIP: 0033:0x7fd22067dde9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd21f9ff0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00007fd2207abf80 RCX: 00007fd22067dde9 RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007fd2206ca47a R08: 0000000000000001 R09: 0000000000000000 R10: 0000000020000880 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fd2207abf80 R15: 00007ffd2d0170d8 </TASK> Allocated by task 7238: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:370 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slub.c:4069 [inline] __kmalloc_noprof+0x200/0x410 mm/slub.c:4082 kmalloc_noprof include/linux/slab.h:664 [inline] __cgroup_bpf_run_filter_setsockopt+0xd47/0x1050 kernel/bpf/cgroup.c:1869 do_sock_setsockopt+0x6b4/0x720 net/socket.c:2293 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x72/0x7a The buggy address belongs to the object at ffff88802cd73da0 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes inside of allocated 1-byte region [ffff88802cd73da0, ffff88802cd73da1) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802cd73020 pfn:0x2cd73 flags: 0xfff80000000000(node=0|zone=1|lastcpupid=0xfff) page_type: 0xffffefff(slab) raw: 00fff80000000000 ffff888015041280 dead000000000100 dead000000000122 raw: ffff88802cd73020 000000008080007f 00000001ffffefff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x12cc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY), pid 5103, tgid 2119833701 (syz-executor.4), ts 5103, free_ts 70804600828 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1490 prep_new_page mm/page_alloc.c:1498 [inline] get_page_from_freelist+0x2e7e/0x2f40 mm/page_alloc.c:3454 __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4712 __alloc_pages_node_noprof include/linux/gfp.h:244 [inline] alloc_pages_node_noprof include/linux/gfp.h:271 [inline] alloc_slab_page+0x5f/0x120 mm/slub.c:2249 allocate_slab+0x5a/0x2e0 mm/slub.c:2412 new_slab mm/slub.c:2465 [inline] ___slab_alloc+0xcd1/0x14b0 mm/slub.c:3615 __slab_alloc+0x58/0xa0 mm/slub.c:3705 __slab_alloc_node mm/slub.c:3758 [inline] slab_alloc_node mm/slub.c:3936 [inline] __do_kmalloc_node mm/slub.c:4068 [inline] kmalloc_node_track_caller_noprof+0x286/0x450 mm/slub.c:4089 kstrdup+0x3a/0x80 mm/util.c:62 device_rename+0xb5/0x1b0 drivers/base/core.c:4558 dev_change_name+0x275/0x860 net/core/dev.c:1232 do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2864 __rtnl_newlink net/core/rtnetlink.c:3680 [inline] rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3727 rtnetlink_rcv_msg+0x89b/0x10d0 net/core/rtnetlink.c:6594 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2559 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361 page last free pid 5146 tgid 5146 stack trace: reset_page_owner include/linux/page_owner.h:25 [inline] free_pages_prepare mm/page_alloc.c:1110 [inline] free_unref_page+0xd3c/0xec0 mm/page_alloc.c:2617 discard_slab mm/slub.c:2511 [inline] __put_partials+0xeb/0x130 mm/slub.c:2980 put_cpu_partial+0x17c/0x250 mm/slub.c:3055 __slab_free+0x2ea/0x3d0 mm/slub.c:4254 qlink_free mm/kasan/quarantine.c:163 [inline] qlist_free_all+0x9e/0x140 mm/kasan/quarantine.c:179 kasan_quarantine_reduce+0x14f/0x170 mm/kasan/quarantine.c:286 __kasan_slab_alloc+0x23/0x80 mm/kasan/common.c:322 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3888 [inline] slab_alloc_node mm/slub.c:3948 [inline] __do_kmalloc_node mm/slub.c:4068 [inline] __kmalloc_node_noprof+0x1d7/0x450 mm/slub.c:4076 kmalloc_node_noprof include/linux/slab.h:681 [inline] kvmalloc_node_noprof+0x72/0x190 mm/util.c:634 bucket_table_alloc lib/rhashtable.c:186 [inline] rhashtable_rehash_alloc+0x9e/0x290 lib/rhashtable.c:367 rht_deferred_worker+0x4e1/0x2440 lib/rhashtable.c:427 process_one_work kernel/workqueue.c:3218 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3299 worker_thread+0x86d/0xd70 kernel/workqueue.c:3380 kthread+0x2f0/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243 Memory state around the buggy address: ffff88802cd73c80: 07 fc fc fc 05 fc fc fc 05 fc fc fc fa fc fc fc ffff88802cd73d00: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc >ffff88802cd73d80: fa fc fc fc 01 fc fc fc fa fc fc fc fa fc fc fc ^ ffff88802cd73e00: fa fc fc fc fa fc fc fc 05 fc fc fc 07 fc fc fc ffff88802cd73e80: 07 fc fc fc 07 fc fc fc 07 fc fc fc 07 fc fc fc Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20240404122051.2303764-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Pablo Neira Ayuso authored
commit 1bc83a01 upstream. Hook unregistration is deferred to the commit phase, same occurs with hook updates triggered by the table dormant flag. When both commands are combined, this results in deleting a basechain while leaving its hook still registered in the core. Fixes: 179d9ba5 ("netfilter: nf_tables: fix table flag updates") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Ziyang Xuan authored
commit 24225011 upstream. nft_unregister_flowtable_type() within nf_flow_inet_module_exit() can concurrent with __nft_flowtable_type_get() within nf_tables_newflowtable(). And thhere is not any protection when iterate over nf_tables_flowtables list in __nft_flowtable_type_get(). Therefore, there is pertential data-race of nf_tables_flowtables list entry. Use list_for_each_entry_rcu() to iterate over nf_tables_flowtables list in __nft_flowtable_type_get(), and use rcu_read_lock() in the caller nft_flowtable_type_get() to protect the entire type query process. Fixes: 3b49e2e9 ("netfilter: nf_tables: add flow table netlink frontend") Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Pablo Neira Ayuso authored
commit 24cea967 upstream. Similar to 2c9f0293 ("netfilter: nf_tables: flush pending destroy work before netlink notifier") to address a race between exit_net and the destroy workqueue. The trace below shows an element to be released via destroy workqueue while exit_net path (triggered via module removal) has already released the set that is used in such transaction. [ 1360.547789] BUG: KASAN: slab-use-after-free in nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.547861] Read of size 8 at addr ffff888140500cc0 by task kworker/4:1/152465 [ 1360.547870] CPU: 4 PID: 152465 Comm: kworker/4:1 Not tainted 6.8.0+ #359 [ 1360.547882] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [ 1360.547984] Call Trace: [ 1360.547991] <TASK> [ 1360.547998] dump_stack_lvl+0x53/0x70 [ 1360.548014] print_report+0xc4/0x610 [ 1360.548026] ? __virt_addr_valid+0xba/0x160 [ 1360.548040] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 1360.548054] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548176] kasan_report+0xae/0xe0 [ 1360.548189] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548312] nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548447] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10 [nf_tables] [ 1360.548577] ? _raw_spin_unlock_irq+0x18/0x30 [ 1360.548591] process_one_work+0x2f1/0x670 [ 1360.548610] worker_thread+0x4d3/0x760 [ 1360.548627] ? __pfx_worker_thread+0x10/0x10 [ 1360.548640] kthread+0x16b/0x1b0 [ 1360.548653] ? __pfx_kthread+0x10/0x10 [ 1360.548665] ret_from_fork+0x2f/0x50 [ 1360.548679] ? __pfx_kthread+0x10/0x10 [ 1360.548690] ret_from_fork_asm+0x1a/0x30 [ 1360.548707] </TASK> [ 1360.548719] Allocated by task 192061: [ 1360.548726] kasan_save_stack+0x20/0x40 [ 1360.548739] kasan_save_track+0x14/0x30 [ 1360.548750] __kasan_kmalloc+0x8f/0xa0 [ 1360.548760] __kmalloc_node+0x1f1/0x450 [ 1360.548771] nf_tables_newset+0x10c7/0x1b50 [nf_tables] [ 1360.548883] nfnetlink_rcv_batch+0xbc4/0xdc0 [nfnetlink] [ 1360.548909] nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink] [ 1360.548927] netlink_unicast+0x367/0x4f0 [ 1360.548935] netlink_sendmsg+0x34b/0x610 [ 1360.548944] ____sys_sendmsg+0x4d4/0x510 [ 1360.548953] ___sys_sendmsg+0xc9/0x120 [ 1360.548961] __sys_sendmsg+0xbe/0x140 [ 1360.548971] do_syscall_64+0x55/0x120 [ 1360.548982] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 1360.548994] Freed by task 192222: [ 1360.548999] kasan_save_stack+0x20/0x40 [ 1360.549009] kasan_save_track+0x14/0x30 [ 1360.549019] kasan_save_free_info+0x3b/0x60 [ 1360.549028] poison_slab_object+0x100/0x180 [ 1360.549036] __kasan_slab_free+0x14/0x30 [ 1360.549042] kfree+0xb6/0x260 [ 1360.549049] __nft_release_table+0x473/0x6a0 [nf_tables] [ 1360.549131] nf_tables_exit_net+0x170/0x240 [nf_tables] [ 1360.549221] ops_exit_list+0x50/0xa0 [ 1360.549229] free_exit_list+0x101/0x140 [ 1360.549236] unregister_pernet_operations+0x107/0x160 [ 1360.549245] unregister_pernet_subsys+0x1c/0x30 [ 1360.549254] nf_tables_module_exit+0x43/0x80 [nf_tables] [ 1360.549345] __do_sys_delete_module+0x253/0x370 [ 1360.549352] do_syscall_64+0x55/0x120 [ 1360.549360] entry_SYSCALL_64_after_hwframe+0x55/0x5d (gdb) list *__nft_release_table+0x473 0x1e033 is in __nft_release_table (net/netfilter/nf_tables_api.c:11354). 11349 list_for_each_entry_safe(flowtable, nf, &table->flowtables, list) { 11350 list_del(&flowtable->list); 11351 nft_use_dec(&table->use); 11352 nf_tables_flowtable_destroy(flowtable); 11353 } 11354 list_for_each_entry_safe(set, ns, &table->sets, list) { 11355 list_del(&set->list); 11356 nft_use_dec(&table->use); 11357 if (set->flags & (NFT_SET_MAP | NFT_SET_OBJECT)) 11358 nft_map_deactivate(&ctx, set); (gdb) [ 1360.549372] Last potentially related work creation: [ 1360.549376] kasan_save_stack+0x20/0x40 [ 1360.549384] __kasan_record_aux_stack+0x9b/0xb0 [ 1360.549392] __queue_work+0x3fb/0x780 [ 1360.549399] queue_work_on+0x4f/0x60 [ 1360.549407] nft_rhash_remove+0x33b/0x340 [nf_tables] [ 1360.549516] nf_tables_commit+0x1c6a/0x2620 [nf_tables] [ 1360.549625] nfnetlink_rcv_batch+0x728/0xdc0 [nfnetlink] [ 1360.549647] nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink] [ 1360.549671] netlink_unicast+0x367/0x4f0 [ 1360.549680] netlink_sendmsg+0x34b/0x610 [ 1360.549690] ____sys_sendmsg+0x4d4/0x510 [ 1360.549697] ___sys_sendmsg+0xc9/0x120 [ 1360.549706] __sys_sendmsg+0xbe/0x140 [ 1360.549715] do_syscall_64+0x55/0x120 [ 1360.549725] entry_SYSCALL_64_after_hwframe+0x55/0x5d Fixes: 0935d558 ("netfilter: nf_tables: asynchronous release") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Pablo Neira Ayuso authored
commit 994209dd upstream. When dormant flag is toggled, hooks are disabled in the commit phase by iterating over current chains in table (existing and new). The following configuration allows for an inconsistent state: add table x add chain x y { type filter hook input priority 0; } add table x { flags dormant; } add chain x w { type filter hook input priority 1; } which triggers the following warning when trying to unregister chain w which is already unregistered. [ 127.322252] WARNING: CPU: 7 PID: 1211 at net/netfilter/core.c:50 1 __nf_unregister_net_hook+0x21a/0x260 [...] [ 127.322519] Call Trace: [ 127.322521] <TASK> [ 127.322524] ? __warn+0x9f/0x1a0 [ 127.322531] ? __nf_unregister_net_hook+0x21a/0x260 [ 127.322537] ? report_bug+0x1b1/0x1e0 [ 127.322545] ? handle_bug+0x3c/0x70 [ 127.322552] ? exc_invalid_op+0x17/0x40 [ 127.322556] ? asm_exc_invalid_op+0x1a/0x20 [ 127.322563] ? kasan_save_free_info+0x3b/0x60 [ 127.322570] ? __nf_unregister_net_hook+0x6a/0x260 [ 127.322577] ? __nf_unregister_net_hook+0x21a/0x260 [ 127.322583] ? __nf_unregister_net_hook+0x6a/0x260 [ 127.322590] ? __nf_tables_unregister_hook+0x8a/0xe0 [nf_tables] [ 127.322655] nft_table_disable+0x75/0xf0 [nf_tables] [ 127.322717] nf_tables_commit+0x2571/0x2620 [nf_tables] Fixes: 179d9ba5 ("netfilter: nf_tables: fix table flag updates") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Borislav Petkov (AMD) authored
Commit 4535e1a4 upstream. The original version of the mitigation would patch in the calls to the untraining routines directly. That is, the alternative() in UNTRAIN_RET will patch in the CALL to srso_alias_untrain_ret() directly. However, even if commit e7c25c44 ("x86/cpu: Cleanup the untrain mess") meant well in trying to clean up the situation, due to micro- architectural reasons, the untraining routine srso_alias_untrain_ret() must be the target of a CALL instruction and not of a JMP instruction as it is done now. Reshuffle the alternative macros to accomplish that. Fixes: e7c25c44 ("x86/cpu: Cleanup the untrain mess") Signed-off-by:
Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Josh Poimboeuf authored
Commit e8efc080 upstream. Factor out the UNTRAIN_RET[_*] common bits into a helper macro. Signed-off-by:
Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/f06d45489778bd49623297af2a983eea09067a74.1693889988.git.jpoimboe@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Josh Poimboeuf authored
Commit 34a3cae7 upstream. CONFIG_RETHUNK, CONFIG_CPU_UNRET_ENTRY and CONFIG_CPU_SRSO are all tangled up. De-spaghettify the code a bit. Some of the rethunk-related code has been shuffled around within the '.text..__x86.return_thunk' section, but otherwise there are no functional changes. srso_alias_untrain_ret() and srso_alias_safe_ret() ((which are very address-sensitive) haven't moved. Signed-off-by:
Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/2845084ed303d8384905db3b87b77693945302b4.1693889988.git.jpoimboe@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Josh Poimboeuf authored
Commit aa730cff upstream. Move srso_alias_return_thunk() to the same section as srso_alias_safe_ret() so they can share a cache line. Signed-off-by:
Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/eadaf5530b46a7ae8b936522da45ae555d2b3393.1693889988.git.jpoimboe@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Marco Pinna authored
commit b32a09ea upstream. Commit 82dfb540 ("VSOCK: Add virtio vsock vsockmon hooks") added virtio_transport_deliver_tap_pkt() for handing packets to the vsockmon device. However, in virtio_transport_send_pkt_work(), the function is called before actually sending the packet (i.e. before placing it in the virtqueue with virtqueue_add_sgs() and checking whether it returned successfully). Queuing the packet in the virtqueue can fail even multiple times. However, in virtio_transport_deliver_tap_pkt() we deliver the packet to the monitoring tap interface only the first time we call it. This certainly avoids seeing the same packet replicated multiple times in the monitoring interface, but it can show the packet sent with the wrong timestamp or even before we succeed to queue it in the virtqueue. Move virtio_transport_deliver_tap_pkt() after calling virtqueue_add_sgs() and making sure it returned successfully. Fixes: 82dfb540 ("VSOCK: Add virtio vsock vsockmon hooks") Cc: stable@vge.kernel.org Signed-off-by:
Marco Pinna <marco.pinn95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20240329161259.411751-1-marco.pinn95@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Haiyang Zhang authored
commit c0de6ab9 upstream. mana_get_rxbuf_cfg() aligns the RX buffer's DMA datasize to be multiple of 64. So a packet slightly bigger than mtu+14, say 1536, can be received and cause skb_over_panic. Sample dmesg: [ 5325.237162] skbuff: skb_over_panic: text:ffffffffc043277a len:1536 put:1536 head:ff1100018b517000 data:ff1100018b517100 tail:0x700 end:0x6ea dev:<NULL> [ 5325.243689] ------------[ cut here ]------------ [ 5325.245748] kernel BUG at net/core/skbuff.c:192! [ 5325.247838] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 5325.258374] RIP: 0010:skb_panic+0x4f/0x60 [ 5325.302941] Call Trace: [ 5325.304389] <IRQ> [ 5325.315794] ? skb_panic+0x4f/0x60 [ 5325.317457] ? asm_exc_invalid_op+0x1f/0x30 [ 5325.319490] ? skb_panic+0x4f/0x60 [ 5325.321161] skb_put+0x4e/0x50 [ 5325.322670] mana_poll+0x6fa/0xb50 [mana] [ 5325.324578] __napi_poll+0x33/0x1e0 [ 5325.326328] net_rx_action+0x12e/0x280 As discussed internally, this alignment is not necessary. To fix this bug, remove it from the code. So oversized packets will be marked as CQE_RX_TRUNCATED by NIC, and dropped. Cc: stable@vger.kernel.org Fixes: 2fbbd712 ("net: mana: Enable RX path to handle various MTU sizes") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1712087316-20886-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Jose Ignacio Tornos Martinez authored
commit 2e91bb99 upstream. After the commit d2689b6a ("net: usb: ax88179_178a: avoid two consecutive device resets"), reset is not executed from bind operation and mac address is not read from the device registers or the devicetree at that moment. Since the check to configure if the assigned mac address is random or not for the interface, happens after the bind operation from usbnet_probe, the interface keeps configured as random address, although the address is correctly read and set during open operation (the only reset now). In order to keep only one reset for the device and to avoid the interface always configured as random address, after reset, configure correctly the suitable field from the driver, if the mac address is read successfully from the device registers or the devicetree. Take into account if a locally administered address (random) was previously stored. cc: stable@vger.kernel.org # 6.6+ Fixes: d2689b6a ("net: usb: ax88179_178a: avoid two consecutive device resets") Reported-by:
Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240403132158.344838-1-jtornosm@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Mahmoud Adam authored
commit 62fc3357 upstream. cp might be null, calling cp->cp_conn would produce null dereference [Simon Horman adds:] Analysis: * cp is a parameter of __rds_rdma_map and is not reassigned. * The following call-sites pass a NULL cp argument to __rds_rdma_map() - rds_get_mr() - rds_get_mr_for_dest * Prior to the code above, the following assumes that cp may be NULL (which is indicative, but could itself be unnecessary) trans_private = rs->rs_transport->get_mr( sg, nents, rs, &mr->r_key, cp ? cp->cp_conn : NULL, args->vec.addr, args->vec.bytes, need_odp ? ODP_ZEROBASED : ODP_NOT_NEEDED); * The code modified by this patch is guarded by IS_ERR(trans_private), where trans_private is assigned as per the previous point in this analysis. The only implementation of get_mr that I could locate is rds_ib_get_mr() which can return an ERR_PTR if the conn (4th) argument is NULL. * ret is set to PTR_ERR(trans_private). rds_ib_get_mr can return ERR_PTR(-ENODEV) if the conn (4th) argument is NULL. Thus ret may be -ENODEV in which case the code in question will execute. Conclusion: * cp may be NULL at the point where this patch adds a check; this patch does seem to address a possible bug Fixes: c055fc00 ("net/rds: fix WARNING in rds_conn_connect_if_down") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
Mahmoud Adam <mngyadam@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240326153132.55580-1-mngyadam@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Jesper Dangaard Brouer authored
commit 03796540 upstream. Notice that skb_mark_for_recycle() is introduced later than fixes tag in commit 6a5bcd84 ("page_pool: Allow drivers to hint on SKB recycling"). It is believed that fixes tag were missing a call to page_pool_release_page() between v5.9 to v5.14, after which is should have used skb_mark_for_recycle(). Since v6.6 the call page_pool_release_page() were removed (in commit 535b9c61 ("net: page_pool: hide page_pool_release_page()") and remaining callers converted (in commit 6bfef2ec ("Merge branch 'net-page_pool-remove-page_pool_release_page'")). This leak became visible in v6.8 via commit dba1b8a7 ("mm/page_pool: catch page_pool memory leaks"). Cc: stable@vger.kernel.org Fixes: 6c5aa6fc ("xen networking: add basic XDP support for xen-netfront") Reported-by:
Leonidas Spyropoulos <artafinde@archlinux.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218654
Reported-by: Arthur Borsboom <arthurborsboom@gmail.com>
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/171154167446.2671062.9127105384591237363.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Geliang Tang authored
commit 40061817 upstream. There's a bug in pm_nl_check_endpoint(), 'dev' didn't be parsed correctly. If calling it in the 2nd test of endpoint_tests() too, it fails with an error like this: creation [FAIL] expected '10.0.2.2 id 2 subflow dev dev' \ found '10.0.2.2 id 2 subflow dev ns2eth2' The reason is '$2' should be set to 'dev', not '$1'. This patch fixes it. Fixes: 69c6ce7b ("selftests: mptcp: add implicit endpoint test case") Cc: stable@vger.kernel.org Signed-off-by:
Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-2-324a8981da48@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Pablo Neira Ayuso authored
commit 0d459e2f upstream. The commit mutex should not be released during the critical section between nft_gc_seq_begin() and nft_gc_seq_end(), otherwise, async GC worker could collect expired objects and get the released commit lock within the same GC sequence. nf_tables_module_autoload() temporarily releases the mutex to load module dependencies, then it goes back to replay the transaction again. Move it at the end of the abort phase after nft_gc_seq_end() is called. Cc: stable@vger.kernel.org Fixes: 72034434 ("netfilter: nf_tables: GC transaction race with abort path") Reported-by:
Kuan-Ting Chen <hexrabbit@devco.re>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Pablo Neira Ayuso authored
commit a45e6889 upstream. Unlike early commit path stage which triggers a call to abort, an explicit release of the batch is required on abort, otherwise mutex is released and commit_list remains in place. Add WARN_ON_ONCE to ensure commit_list is empty from the abort path before releasing the mutex. After this patch, commit_list is always assumed to be empty before grabbing the mutex, therefore 03c1f1ef ("netfilter: Cleanup nft_net->module_list from nf_tables_exit_net()") only needs to release the pending modules for registration. Cc: stable@vger.kernel.org Fixes: c0391b6a ("netfilter: nf_tables: missing validation from the abort path") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Bastien Nocera authored
commit 7835fcfd upstream. struct hci_dev members conn_info_max_age, conn_info_min_age, le_conn_max_interval, le_conn_min_interval, le_adv_max_interval, and le_adv_min_interval can be modified from the HCI core code, as well through debugfs. The debugfs implementation, that's only available to privileged users, will check for boundaries, making sure that the minimum value being set is strictly above the maximum value that already exists, and vice-versa. However, as both minimum and maximum values can be changed concurrently to us modifying them, we need to make sure that the value we check is the value we end up using. For example, with ->conn_info_max_age set to 10, conn_info_min_age_set() gets called from vfs handlers to set conn_info_min_age to 8. In conn_info_min_age_set(), this goes through: if (val == 0 || val > hdev->conn_info_max_age) return -EINVAL; Concurrently, conn_info_max_age_set() gets called to set to set the conn_info_max_age to 7: if (val == 0 || val > hdev->conn_info_max_age) return -EINVAL; That check will also pass because we used the old value (10) for conn_info_max_age. After those checks that both passed, the struct hci_dev access is mutex-locked, disabling concurrent access, but that does not matter because the invalid value checks both passed, and we'll end up with conn_info_min_age = 8 and conn_info_max_age = 7 To fix this problem, we need to lock the structure access before so the check and assignment are not interrupted. This fix was originally devised by the BassCheck[1] team, and considered the problem to be an atomicity one. This isn't the case as there aren't any concerns about the variable changing while we check it, but rather after we check it parallel to another change. This patch fixes CVE-2024-24858 and CVE-2024-24857. [1] https://sites.google.com/view/basscheck/ Co-developed-by:
Gui-Dong Han <2045gemini@gmail.com>
Signed-off-by: Gui-Dong Han <2045gemini@gmail.com>
Link: https://lore.kernel.org/linux-bluetooth/20231222161317.6255-1-2045gemini@gmail.com/
Link: https://nvd.nist.gov/vuln/detail/CVE-2024-24858
Link: https://lore.kernel.org/linux-bluetooth/20231222162931.6553-1-2045gemini@gmail.com/
Link: https://lore.kernel.org/linux-bluetooth/20231222162310.6461-1-2045gemini@gmail.com/
Link: https://nvd.nist.gov/vuln/detail/CVE-2024-24857
Fixes: 31ad1691 ("Bluetooth: Add conn info lifetime parameters to debugfs")
Fixes: 729a1051 ("Bluetooth: Expose default LE advertising interval via debugfs")
Fixes: 71c3b60e
("Bluetooth: Move BR/EDR debugfs file creation into hci_debugfs.c")
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Hui Wang authored
commit c569242c upstream. We have a BT headset (Lenovo Thinkplus XT99), the pairing and connecting has no problem, once this headset is paired, bluez will remember this device and will auto re-connect it whenever the device is powered on. The auto re-connecting works well with Windows and Android, but with Linux, it always fails. Through debugging, we found at the rfcomm connection stage, the bluetooth stack reports "Connection refused - security block (0x0003)". For this device, the re-connecting negotiation process is different from other BT headsets, it sends the Link_KEY_REQUEST command before the CONNECT_REQUEST completes, and it doesn't send ENCRYPT_CHANGE command during the negotiation. When the device sends the "connect complete" to hci, the ev->encr_mode is 1. So here in the conn_complete_evt(), if ev->encr_mode is 1, link type is ACL and HCI_CONN_ENCRYPT is not set, we set HCI_CONN_ENCRYPT to this conn, and update conn->enc_key_size accordingly. After this change, this BT headset could re-connect with Linux successfully. This is the btmon log after applying the patch, after receiving the "Connect Complete" with "Encryption: Enabled", will send the command to read encryption key size: > HCI Event: Connect Request (0x04) plen 10 Address: 8C:3C:AA:D8:11:67 (OUI 8C-3C-AA) Class: 0x240404 Major class: Audio/Video (headset, speaker, stereo, video, vcr) Minor class: Wearable Headset Device Rendering (Printing, Speaker) Audio (Speaker, Microphone, Headset) Link type: ACL (0x01) ... > HCI Event: Link Key Request (0x17) plen 6 Address: 8C:3C:AA:D8:11:67 (OUI 8C-3C-AA) < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 Address: 8C:3C:AA:D8:11:67 (OUI 8C-3C-AA) Link key: ${32-hex-digits-key} ... > HCI Event: Connect Complete (0x03) plen 11 Status: Success (0x00) Handle: 256 Address: 8C:3C:AA:D8:11:67 (OUI 8C-3C-AA) Link type: ACL (0x01) Encryption: Enabled (0x01) < HCI Command: Read Encryption Key... (0x05|0x0008) plen 2 Handle: 256 < ACL Data TX: Handle 256 flags 0x00 dlen 10 L2CAP: Information Request (0x0a) ident 1 len 2 Type: Extended features supported (0x0002) > HCI Event: Command Complete (0x0e) plen 7 Read Encryption Key Size (0x05|0x0008) ncmd 1 Status: Success (0x00) Handle: 256 Key size: 16 Cc: stable@vger.kernel.org Link: https://github.com/bluez/bluez/issues/704 Reviewed-by:
Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Johan Hovold authored
commit 39646f29 upstream. Some Bluetooth controllers lack persistent storage for the device address and instead one can be provided by the boot firmware using the 'local-bd-address' devicetree property. The Bluetooth devicetree bindings clearly states that the address should be specified in little-endian order, but due to a long-standing bug in the Qualcomm driver which reversed the address some boot firmware has been providing the address in big-endian order instead. Add a new quirk that can be set on platforms with broken firmware and use it to reverse the address when parsing the property so that the underlying driver bug can be fixed. Fixes: 5c0a1001 ("Bluetooth: hci_qca: Add helper to set device address") Cc: stable@vger.kernel.org # 5.1 Reviewed-by:
Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Johan Hovold authored
commit 77f45cca upstream. The WCN6855 firmware on the Lenovo ThinkPad X13s expects the Bluetooth device address in big-endian order when setting it using the EDL_WRITE_BD_ADDR_OPCODE command. Presumably, this is the case for all non-ROME devices which all use the EDL_WRITE_BD_ADDR_OPCODE command for this (unlike the ROME devices which use a different command and expect the address in little-endian order). Reverse the little-endian address before setting it to make sure that the address can be configured using tools like btmgmt or using the 'local-bd-address' devicetree property. Note that this can potentially break systems with boot firmware which has started relying on the broken behaviour and is incorrectly passing the address via devicetree in big-endian order. The only device affected by this should be the WCN3991 used in some Chromebooks. As ChromeOS updates the kernel and devicetree in lockstep, the new 'qcom,local-bd-address-broken' property can be used to determine if the firmware is buggy so that the underlying driver bug can be fixed without breaking backwards compatibility. Set the HCI_QUIRK_BDADDR_PROPERTY_BROKEN quirk for such platforms so that the address is reversed when parsing the address property. Fixes: 5c0a1001 ("Bluetooth: hci_qca: Add helper to set device address") Cc: stable@vger.kernel.org # 5.1 Cc: Balakrishna Godavarthi <quic_bgodavar@quicinc.com> Cc: Matthias Kaehlcke <mka@chromium.org> Tested-by: Nikita Travkin <nikita@trvn.ru> # sc7180 Reviewed-by:
Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Johan Hovold authored
commit e12e2800 upstream. Several Qualcomm Bluetooth controllers lack persistent storage for the device address and instead one can be provided by the boot firmware using the 'local-bd-address' devicetree property. The Bluetooth bindings clearly states that the address should be specified in little-endian order, but due to a long-standing bug in the Qualcomm driver which reversed the address some boot firmware has been providing the address in big-endian order instead. The boot firmware in SC7180 Trogdor Chromebooks is known to be affected so mark the 'local-bd-address' property as broken to maintain backwards compatibility with older firmware when fixing the underlying driver bug. Note that ChromeOS always updates the kernel and devicetree in lockstep so that there is no need to handle backwards compatibility with older devicetrees. Fixes: 7ec3e673 ("arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt") Cc: stable@vger.kernel.org # 5.10 Cc: Rob Clark <robdclark@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Johan Hovold authored
commit 4790a73a upstream. This reverts commit 7dcd3e01. Qualcomm Bluetooth controllers like WCN6855 do not have persistent storage for the Bluetooth address and must therefore start as unconfigured to allow the user to set a valid address unless one has been provided by the boot firmware in the devicetree. A recent change snuck into v6.8-rc7 and incorrectly started marking the default (non-unique) address as valid. This specifically also breaks the Bluetooth setup for some user of the Lenovo ThinkPad X13s. Note that this is the second time Qualcomm breaks the driver this way and that this was fixed last year by commit 6945795b ("Bluetooth: fix use-bdaddr-property quirk"), which also has some further details. Fixes: 7dcd3e01 ("Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT") Cc: stable@vger.kernel.org # 6.8 Cc: Janaki Ramaiah Thota <quic_janathot@quicinc.com> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org>
Reported-by: Clayton Craft <clayton@craftyguy.net>
Tested-by: Clayton Craft <clayton@craftyguy.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Uros Bizjak authored
commit 9d98aa08 upstream. Adjust the IP passed to `emit_patch` so it calculates the correct offset for the CALL instruction if `x86_call_depth_emit_accounting` emits code. Otherwise we will skip some instructions and most likely crash. Fixes: b2e9dfe5 ("x86/bpf: Emit call depth accounting if required") Link: https://lore.kernel.org/lkml/20230105214922.250473-1-joanbrugueram@gmail.com/ Co-developed-by:
Joan Bruguera Micó <joanbrugueram@gmail.com>
Signed-off-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240401185821.224068-2-ubizjak@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-