- Dec 17, 2019
-
-
Yunsheng Lin authored
Currently, a timer is defined to schedule hclgevf_service per second. To simplify the code, this patch uses the delayed work instead of timer to schedule hclgevf_serive. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sven Eckelmann authored
The sparse commit 6002ded74587 ("add a flag to warn on casts to/from bitwise pointers") introduced a check for non-direct casts from/to restricted datatypes (when -Wbitwise-pointer is enabled). This triggered a warning in the 64 bit optimized ipv6_addr_is_*() functions because sparse doesn't know that the buffer already points to some data in the correct bitwise integer format. But these were correct and can therefore be marked with __force to signalize sparse an intended cast to a specific bitwise type. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sven Eckelmann authored
The sparse commit 6002ded74587 ("add a flag to warn on casts to/from bitwise pointers") introduced a check for non-direct casts from/to restricted datatypes (when -Wbitwise-pointer is enabled). This triggered a warning in ipv6_get_dsfield() because sparse doesn't know that the buffer already points to some data in the correct bitwise integer format. This was already fixed in ipv6_change_dsfield() by the __force attribute and can be fixed here the same way. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Some users complained about problems with r8169 and it turned out that the generic PHY driver was used instead instead of the dedicated one. In all cases reason was that r8169.ko was in initramfs, but realtek.ko not. Manually adding realtek.ko to initramfs fixed the issues. Root cause seems to be that tools like dracut and genkernel don't consider softdeps. Add a check for loaded Realtek PHY driver module and provide the user with a hint if it's not loaded. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yangbo Lu says: ==================== dpaa2-ptp: support external trigger event This patch-set is to add external trigger event support for dpaa2-ptp driver since MC firmware has supported external trigger interrupt with a new v2 dprtc_set_irq_mask() API. And extts_clean_up() function in ptp_qoriq driver needs to be exported with minor fixes for dpaa2-ptp reusing. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yangbo Lu authored
This patch is to add external trigger event support for dpaa2-ptp driver with v2 dprtc_set_irq_mask() API. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yangbo Lu authored
Export extts_clean_up() function so that dpaa2-ptp driver is able to reuse it. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yangbo Lu authored
For PTP timer supporting external trigger timestamp FIFO, there is a valid bit in TMR_STAT register indicating the timestamp is available. For PTP timer without FIFO, there is not TMR_STAT register. This patch is to check the valid bit for the FIFO before reading timestamp, and to avoid operating TMR_STAT register for PTP timer without the FIFO. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Dec 16, 2019
-
-
Arjun Roy authored
At present, if the last frag of paged data in a skb has < PAGE_SIZE data, we compute the recv_skip_hint as being equal to the size of that frag and the entire next skb. Instead, just return the runt frag size as the hint. recv_skip_hint is used by the application to skip over bytes that can not be mmaped, so returning a too big chunk is pessimistic and forces more bytes to be copied. Signed-off-by:
Arjun Roy <arjunroy@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com>
-
Ursula Braun authored
Save a line of code by making use of ATOMIC_INIT() for lgr_cnt. Suggested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com>
-
- Dec 15, 2019
-
-
Russell King authored
of_phy_attach() hides the return value of phy_attach_direct(), forcing us to return a "generic" ENODEV error code that is indistinguishable from the lack-of-phy-property case. Switch to using of_phy_find_device() to find the PHY device, and then propagating any phy_attach_direct() error back to the caller. Link: https://lore.kernel.org/lkml/20191210113829.GT25745@shell.armlinux.org.uk Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com>
-
Vivien Didelot authored
This adds rx_bpdu, tx_bpdu, rx_tcn, tx_tcn, transition_blk, transition_fwd xstats counters to the bridge ports copied over via netlink, providing useful information for STP. Signed-off-by:
Vivien Didelot <vivien.didelot@gmail.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com>
-
Willem de Bruijn authored
The SO_TXTIME test depends on accurate timers. In some virtualized environments the test has been reported to be flaky. This is easily reproduced by disabling kvm acceleration in Qemu. Allow greater variance in a run and retry to further reduce flakiness. Observed errors are one of two kinds: either the packet arrives too early or late at recv(), or it was dropped in the qdisc itself and the recv() call times out. In the latter case, the qdisc queues a notification to the error queue of the send socket. Also explicitly report this cause. Link: https://lore.kernel.org/netdev/CA+FuTSdYOnJCsGuj43xwV1jxvYsaoa_LzHQF9qMyhrkLrivxKw@mail.gmail.com Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com>
-
zhengbin authored
Fixes coccicheck warning: drivers/net/phy/dp83869.c:337:2-3: Unneeded semicolon Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com>
-
Andy Roulin authored
The bond slave actor/partner operating state is exported as bitfield to userspace, which lacks a way to interpret it, e.g., iproute2 only prints the state as a number: ad_actor_oper_port_state 15 For userspace to interpret the bitfield, the bitfield definitions should be part of the uapi. The bitfield itself is defined in the 802.3ad standard. This commit moves the 802.3ad bitfield definitions to uapi. Related iproute2 patches, soon to be posted upstream, use the new uapi headers to pretty-print bond slave state, e.g., with ip -d link show ad_actor_oper_port_state_str <active,short_timeout,aggregating,in_sync> Signed-off-by:
Andy Roulin <aroulin@cumulusnetworks.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com>
-
- Dec 14, 2019
-
-
Jakub Kicinski authored
This reverts commit 78beef62 ("nfp: abm: fix memory leak in nfp_abm_u32_knode_replace"). The quoted commit does not fix anything and resulted in a bogus CVE-2019-19076. If match is NULL then it is known there is no matching entry in list, hence, calling nfp_abm_u32_knode_delete() is pointless. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
John Hurley <john.hurley@netronome.com>
-
- Dec 13, 2019
-
-
David S. Miller authored
Michael S. Tsirkin says: ==================== netdev: ndo_tx_timeout cleanup Yet another forward declaration I missed. Hopfully the last one ... A bunch of drivers want to know which tx queue triggered a timeout, and virtio wants to do the same. We actually have the info to hand, let's just pass it on to drivers. Note: tested with an experimental virtio patch by Julio. That patch itself isn't ready yet though, so not included. Other drivers compiled only. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael S. Tsirkin authored
Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael S. Tsirkin authored
Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael S. Tsirkin authored
This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Heiner Kallweit <hkallweit1@gmail.com> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by:
Shannon Nelson <snelson@pensando.io> Reviewed-by:
Martin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sameeh Jubran says: ==================== Introduce XDP to ena This patchset includes 3 patches: * XDP_DROP implementation * XDP_TX implementation * A fix for an issue which might occur due to the XDP_TX patch. I see fit to place it as a standalone patch for clarity. Difference from v2: * Fixed the usage of rx headroom (XDP_PACKET_HEADROOM) * Aligned the page_offset of the packet when passing it to the stack * Switched to using xdp_frame in xdp xmit queue * Dropped the print for unsupported commands * Cosmetic changes Difference from RFC v1 (XDP_DROP patch): * Initialized xdp.rxq pointer * Updated max_mtu on attachment of xdp and removed the check from ena_change_mtu() * Moved the xdp execution from ena_rx_skb() to ena_clean_rx_irq() * Moved xdp buff (struct xdp_buff) from rx_ring to the local stack * Started using netlink's extack mechanism to deliver error messages to the user ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sameeh Jubran authored
The first_interrupt field is accessed in ena_intr_msix_io() upon receiving an interrupt.The rx_ring and tx_ring fields of napi can be NULL when receiving interrupt for xdp queues. This patch fixes the issue by moving the field to the ena_napi struct. Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sameeh Jubran authored
This commit implements the XDP_TX action in the ena driver. We allocate separate tx queues for the XDP_TX. We currently allow xdp only when there is enough queues to allocate for xdp. Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sameeh Jubran authored
This commit implements the basic functionality of drop/pass logic in the ena driver. Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michal Kubecek says: ==================== ethtool netlink interface, preliminary part As Jakub Kicinski suggested in ethtool netlink v7 discussion, this submission consists only of preliminary patches which raised no objections; first four patches already have Acked-by or Reviewed-by. - patch 1 exposes permanent hardware address (as shown by "ethtool -P") via rtnetlink - patch 2 is renames existing netlink helper to a better name - patch 3 and 4 reorganize existing ethtool code (no functional change) - patch 5 makes the table of link mode names available as an ethtool string set (will be needed for the netlink interface) Once we get these out of the way, v8 of the first part of the ethtool netlink interface will follow. Changes from v2 to v3: fix SPDX licence identifiers (patch 3 and 5). Changes from v1 to v2: restore build time check that all link modes have assigned a name (patch 5). ==================== Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Kubecek authored
Unlike e.g. netdev features, the ethtool ioctl interface requires link mode table to be in sync between kernel and userspace for userspace to be able to display and set all link modes supported by kernel. The way arbitrary length bitsets are implemented in netlink interface, this will be no longer needed. To allow userspace to access all link modes running kernel supports, add table of ethernet link mode names and make it available as a string set to userspace GET_STRSET requests. Add build time check to make sure names are defined for all modes declared in enum ethtool_link_mode_bit_indices. Once the string set is available, make it also accessible via ioctl. Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Kubecek authored
Introduce file net/ethtool/common.c for code shared by ioctl and netlink ethtool interface. Move name tables of features, RSS hash functions, tunables and PHY tunables into this file. Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Kubecek authored
The ethtool netlink interface is going to be split into multiple files so that it will be more convenient to put all of them in a separate directory net/ethtool. Start by moving current ethtool.c with ioctl interface into this directory and renaming it to ioctl.c. Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Acked-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Kubecek authored
Function nl80211_validate_nested() is not specific to nl80211, it's a counterpart to nla_validate_nested_deprecated() with strict validation. For consistency with other validation and parse functions, rename it to nla_validate_nested(). Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Acked-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Kubecek authored
Permanent hardware address of a network device was traditionally provided via ethtool ioctl interface but as Jiri Pirko pointed out in a review of ethtool netlink interface, rtnetlink is much more suitable for it so let's add it to the RTM_NEWLINK message. Add IFLA_PERM_ADDRESS attribute to RTM_NEWLINK messages unless the permanent address is all zeros (i.e. device driver did not fill it). As permanent address is not modifiable, reject userspace requests containing IFLA_PERM_ADDRESS attribute. Note: we already provide permanent hardware address for bond slaves; unfortunately we cannot drop that attribute for backward compatibility reasons. v5 -> v6: only add the attribute if permanent address is not zero Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Acked-by:
Jiri Pirko <jiri@mellanox.com> Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Kirill Tkhai says: ==================== unix: Show number of scm files in fdinfo v2: Pass correct argument to locked in patch [2/2]. Unix sockets like a block box. You never know what is pending there: there may be a file descriptor holding a mount or a block device, or there may be whole universes with namespaces, sockets with receive queues full of sockets etc. The patchset makes number of pending scm files be visible in fdinfo. This may be useful to determine, that socket should be investigated or which task should be killed to put a reference counter on a resourse. $cat /proc/[pid]/fdinfo/[unix_sk_fd] | grep scm_fds scm_fds: 1 ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
Unix sockets like a block box. You never know what is stored there: there may be a file descriptor holding a mount or a block device, or there may be whole universes with namespaces, sockets with receive queues full of sockets etc. The patch adds a little debug and accounts number of files (not recursive), which is in receive queue of a unix socket. Sometimes this is useful to determine, that socket should be investigated or which task should be killed to put reference counter on a resourse. v2: Pass correct argument to lockdep Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
This adds .show_fdinfo to socket_file_ops, so protocols will be able to print their specific data in fdinfo. Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Dec 12, 2019
-
-
David S. Miller authored
Stefano Garzarella says: ==================== vsock: add local transport support v2: - style fixes [Dave] - removed RCU sync and changed 'the_vsock_loopback' in a global static variable [Stefan] - use G2H transport when local transport is not loaded and remote cid is VMADDR_CID_LOCAL [Stefan] - rebased on net-next v1: https://patchwork.kernel.org/cover/11251735/ This series introduces a new transport (vsock_loopback) to handle local communication. This could be useful to test vsock core itself and to allow developers to test their applications without launching a VM. Before this series, vmci and virtio transports allowed this behavior, but only in the guest. We are moving the loopback handling in a new transport, because it might be useful to provide this feature also in the host or when no H2G/G2H transports (hyperv, virtio, vmci) are loaded. The user can use the loopback with the new VMADDR_CID_LOCAL (that replaces VMADDR_CID_RESERVED) in any condition. Otherwise, if the G2H transport is loaded, it can also use the guest local CID as previously supported by vmci and virtio transports. If G2H transport is not loaded, the user can also use VMADDR_CID_HOST for local communication. Patch 1 is a cleanup to build virtio_transport_common without virtio Patch 2 adds the new VMADDR_CID_LOCAL, replacing VMADDR_CID_RESERVED Patch 3 adds a new feature flag to register a loopback transport Patch 4 adds the new vsock_loopback transport based on the loopback implementation of virtio_transport Patch 5 implements the logic to use the local transport for loopback communication Patch 6 removes the loopback from virtio_transport ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefano Garzarella authored
We can remove the loopback handling from virtio_transport, because now the vsock core is able to handle local communication using the new vsock_loopback device. Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefano Garzarella authored
Now that we have a transport that can handle the local communication, we can use it when it is loaded. A socket will use the local transport (loopback) when the remote CID is: - equal to VMADDR_CID_LOCAL - or equal to transport_g2h->get_local_cid(), if transport_g2h is loaded (this allows us to keep the same behavior implemented by virtio and vmci transports) - or equal to VMADDR_CID_HOST, if transport_g2h is not loaded Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefano Garzarella authored
This patch adds a new vsock_loopback transport to handle local communication. This transport is based on the loopback implementation of virtio_transport, so it uses the virtio_transport_common APIs to interface with the vsock core. Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefano Garzarella authored
This patch allows to register a transport able to handle local communication (loopback). Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefano Garzarella authored
The VMADDR_CID_RESERVED (1) was used by VMCI, but now it is not used anymore, so we can reuse it for local communication (loopback) adding the new well-know CID: VMADDR_CID_LOCAL. Cc: Jorgen Hansen <jhansen@vmware.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by:
Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefano Garzarella authored
We can remove virtio header includes, because virtio_transport_common doesn't use virtio API, but provides common functions to interface virtio/vhost transports with the af_vsock core, and to handle the protocol. Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-