- Apr 28, 2018
-
-
Ahmed Abdelsalam authored
This patch adds a documentation for seg_flowlabel sysctl into Documentation/networking/ip-sysctl.txt Signed-off-by:
Ahmed Abdelsalam <amsalam20@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jisheng Zhang authored
U64_MAX is well defined now while the UINT64_MAX is not, so we fall back to drivers' own definition as below: #ifndef UINT64_MAX #define UINT64_MAX (u64)(~((u64)0)) #endif I believe this is in one phy driver then copied and pasted to other phy drivers. Replace the UINT64_MAX with U64_MAX to clean up the source code. Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
YueHaibing authored
use ns_to_timespec64() and timespec64_to_ns() instead of open coding Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bjorn Andersson authored
This implements a misc character device named "qrtr-tun" for the purpose of allowing user space applications to implement endpoints in the qrtr network. This allows more advanced (and dynamic) testing of the qrtr code as well as opens up the ability of tunneling qrtr over a network or USB link. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Petr Machata says: ==================== selftests: Add tests for mirroring to gretap This suite tests GRE-encapsulated mirroring. The general topology that most of the tests use is as follows, but each test defines details of the topology based on its needs, and some tests actually use a somewhat different topology. +---------------------+ +---------------------+ | H1 | | H2 | | + $h1 | | $h2 + | +-----|---------------+ +---------------|-----+ | | +-----|------------------------------------------------------|-----+ | SW o---> mirror | | | +---|------------------------------------------------------|---+ | | | + $swp1 BR $swp2 + | | | +--------------------------------------------------------------+ | | | | + $swp3 + gt6 (ip6gretap) + gt4 (gretap) | +-----|----------------:--------------------:----------------------+ | : : +-----|----------------:--------------------:----------------------+ | + $h3 + h3-gt6(ip6gretap) + h3-gt4 (gretap) | | H3 | +------------------------------------------------------------------+ The following axes of configuration space are tested: - ingress and egress mirroring - mirroring triggered by matchall and flower - mirroring to ipgretap and ip6gretap - remote tunnel reachable directly or through a next-hop route - skip_sw as well as skip_hw configurations Apart from basic tests with the above mentioned features, the following tests are included: - handling of changes to neighbors pertinent to routing decisions in mirrored underlay - handling of configuration changes at the mirrored-to tunnel (endpoint addresses, upness) A suite of mlxsw-specific tests will be part of a separate submission through linux-mlxsw patch queue. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
These tests set up mirroring in a situation that the configuration is incorrect, i.e. mirrored packets, if any, are not supposed to reach destination tunnel device. Then the configuration is rectified and mirroring is checked to have started working. Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Test that when a mirror to gretap or ip6gretap netdevice is configured, changes to neighbors are reflected. Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Add a test for mirroring to a gretap and an ip6gretap netdevices such that the mirroring action is triggered by a flower match. Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Test mirroring to a gretap and an ip6gretap netdevice with a bound device, where the tunnel device and the bound device are in different VRFs (an overlay / underlay configuration). Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Test mirror to a gretap and an ip6gretap netdevice such that the remote address of the tunnel is reachable through a next-hop route. Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Add a test for basic mirroring to gretap and ip6gretap netdevices. Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
To simplify implementation of mirror-to-gretap tests, extend lib.sh with several new functions that might potentially be useful more broadly (although right now the mirroring tests will be the only client). Also add mirror_lib.sh with code useful for mirroring tests, mirror_gre_lib.sh with code specifically useful for mirror-to-gretap tests, and mirror_gre_topo.sh that primes a given test with a good baseline topology that the test can then tweak to its liking. Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Net-next updates. This series has 3 main features. The first is to add mqprio TC to hardware queue mapping to avoid reprogramming hardware CoS queue watermarks during run-time. The second is DIM improvements from Andy Gospo. The third is some improvements to VF resource allocations when supporting large numbers of VFs with more limited resources. There are some additional minor improvements and a new function level discard counter. v2: Fixed EEPROM typo noted by Andrew Lunn. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Add logic to reserve default rings at driver open time if none was reserved during probe time. This will happen when the PF driver did not provision minimum rings to the VF, due to more limited resources. Driver open will only succeed if some minimum rings can be reserved. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
For completeness and correctness, the VF driver needs to reserve these RSS and L2 contexts. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
When rings are more limited and the PF has not provisioned minimum guaranteed rings to the VF, do not reserve rings during driver probe. Wait till device open before reserving rings when they will be used. Device open will succeed if some minimum rings can be successfully reserved and allocated. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The current code does not reserve rings during ethtool -L when the device is down. The rings will be reserved when the device is later opened. Change it to reserve rings during ethtool -L when the device is down. This provides a better guarantee that the device open will be successful when the rings are reserved ahead of time. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andy Gospodarek authored
This adds debugfs support for bnxt_en with the purpose of allowing users to examine the current DIM profile in use for each receive queue. This was instrumental in debugging issues found with DIM and ensuring that the profiles we expect to use are the profiles being used. Signed-off-by:
Andy Gospodarek <gospo@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andy Gospodarek authored
Testing with DIM enabled on older kernels indicated that firmware calls were slower than expected. More detailed analysis indicated that the default 25us delay was higher than necessary. Reducing the time spend in usleep_range() for the first several calls would reduce the overall latency of firmware calls on newer Intel processors. Signed-off-by:
Andy Gospodarek <gospo@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andy Gospodarek authored
This keeps the RING_IDLE flag set in hardware for higher coalesce settings by default and improved latency. Signed-off-by:
Andy Gospodarek <gospo@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Firmware does not allow the operation and would return failure, causing a warning in dmesg. So check for VF and disallow it in the driver. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
Add counters to display sum of rx/tx_discard_pkts of all rings as function level statistics via ethtool. Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Replace switch statements printing different messages for every ring type with a common message. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Older firmware will reject this call and cause an error message to be printed by the VF driver. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Firmware messages that are forwarded from PF to VFs are encapsulated. The size of these encapsulated messages must not exceed the maximum defined message size. Add appropriate checks to avoid oversize messages. Firmware messages may be expanded in future specs and this will provide some guardrails to avoid data corruption. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Initially, the MQPRIO TCs are mapped 1:1 directly to the hardware queues. Some of these hardware queues are configured to be lossless. When PFC is enabled on one of more TCs, we now need to remap the TCs that have PFC enabled to the lossless hardware queues. After remapping, we need to close and open the NIC for the new mapping to take effect. We also need to reprogram all ETS parameters. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The current driver maps MQPRIO traffic classes directly 1:1 to the internal hardware queues (TC0 maps to hardware queue 0, etc). This direct mapping requires the internal hardware queues to be reconfigured from lossless to lossy and vice versa when necessary. This involves reconfiguring internal buffer thresholds which is disruptive and not always reliable. Implement a new scheme to map TCs to internal hardware queues by matching up their PFC requirements. This will eliminate the need to reconfigure a hardware queue internal buffers at run time. After remapping, the NIC is closed and opened for the new TC to hardware queues to take effect. This patch only adds the basic mapping logic. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
The calls up from the napi poll reading the receive ring had many places where an argument was being recreated. I.e the caller already had the value and wasn't passing it, then the callee would use known relationship to determine the same value. Simpler and faster to just pass arguments needed. Also, add const in a couple places where message is being only read. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Marcelo Ricardo Leitner says: ==================== sctp: refactor MTU handling Currently MTU handling is spread over SCTP stack. There are multiple places doing same/similar calculations and updating them is error prone as one spot can easily be left out. This patchset converges it into a more concise and consistent code. In general, it moves MTU handling from functions with bigger objectives, such as sctp_assoc_add_peer(), to specific functions. It's also a preparation for the next patchset, which removes the duplication between sctp_make_op_error_space and sctp_make_op_error_fixed and relies on sctp_mtu_payload introduced here. More details on each patch. ==================== Reviewed-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
RFC 6458 Section 8.1.16 says that setting MAXSEG as 0 means that the user is not limiting it, and not that it should set to the *current* maximum, as we are doing. This patch thus allow setting it as 0, effectively removing the user limit. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
When setting SCTP_MAXSEG sock option, it should consider which kind of data chunk is being used if the asoc is already available, so that the limit better reflect reality. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
sctp_sendmsg() could trigger PMTU updates even when PMTU_DISABLED was set, as pmtu_pending could be set unconditionally during icmp handling if the socket was in use by the application. This patch fixes it by checking for PMTU_DISABLED when handling such deferred updates. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
sctp_transport_route currently is very similar to sctp_transport_pmtu plus a few other bits. This patch reuses sctp_transport_pmtu in sctp_transport_route and removes the duplicated code. Also, as all calls to sctp_transport_route were forcing the dst release before calling it, let's just include such release too. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
We are now keeping the MTU information synced between asoc, transport and dst, which makes the check at sctp_packet_config() not needed anymore. As it was the sole caller to this function, lets remove it. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
Which makes sure that the MTU respects the minimum value of SCTP_DEFAULT_MINSEGMENT and that it is correctly aligned. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
No need for this helper. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
and avoid the open-coded versions of it. Now sctp_datamsg_from_user can just re-use asoc->frag_point as it will always be updated. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
When given a MTU, this function calculates how much payload we can carry on it. Without a MTU, it calculates the amount of header overhead we have. So that when we have extra overhead, like the one added for IP options on SELinux patches, it is easier to handle it. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
All changes to asoc PMTU should now go through this wrapper, making it easier to track them and to do other actions upon it. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
As noticed by Xin Long, the if() here is always true as PMTU can never be 0. Reported-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-