- Apr 16, 2019
-
-
Paolo Bonzini authored
The SVI, RVI, virtual-APIC page address and APIC-access page address fields were left out of dump_vmcs. Add them. KERN_CONT technically isn't SMP safe, but it's okay to use it here since the whole of dump_vmcs() is a single huge multi-line piece of output that isn't SMP-safe. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Vitaly Kuznetsov authored
In __apic_accept_irq() interface trig_mode is int and actually on some code paths it is set above u8: kvm_apic_set_irq() extracts it from 'struct kvm_lapic_irq' where trig_mode is u16. This is done on purpose as e.g. kvm_set_msi_irq() sets it to (1 << 15) & e->msi.data kvm_apic_local_deliver sets it to reg & (1 << 15). Fix the immediate issue by making 'tm' into u16. We may also want to adjust __apic_accept_irq() interface and use proper sizes for vector, level, trig_mode but this is not urgent. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
These were found with smatch, and then generalized when applicable. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Hariprasad Kelam authored
Changed passing argument as "0 to NULL" which resolves below sparse warning arch/x86/kvm/x86.c:3096:61: warning: Using plain integer as NULL pointer Signed-off-by:
Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Vitaly Kuznetsov authored
Add a simple test for SMM, based on VMX. The test implements its own sync between the guest and the host as using our ucall library seems to be too cumbersome: SMI handler is happening in real-address mode. This patch also fixes KVM_SET_NESTED_STATE to happen after KVM_SET_VCPU_EVENTS, in fact it places it last. This is because KVM needs to know whether the processor is in SMM or not. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
-no-pie was added to GCC at the same time as their configuration option --enable-default-pie. Compilers that were built before do not have -no-pie, but they also do not need it. Detect the option at build time. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Starting state migration after an IO exit without first completing IO may result in test failures. We already have two tests that need this (this patch in fact fixes evmcs_test, similar to what was fixed for state_test in commit 0f73bbc8 , "KVM: selftests: complete IO before migrating guest state", 2019-03-13) and a third is coming. So, move the code to vcpu_save_state, and while at it do not access register state until after I/O is complete. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Invoking the 64-bit variation on a 32-bit kenrel will crash the guest, trigger a WARN, and/or lead to a buffer overrun in the host, e.g. rsm_load_state_64() writes r8-r15 unconditionally, but enum kvm_reg and thus x86_emulate_ctxt._regs only define r8-r15 for CONFIG_X86_64. KVM allows userspace to report long mode support via CPUID, even though the guest is all but guaranteed to crash if it actually tries to enable long mode. But, a pure 32-bit guest that is ignorant of long mode will happily plod along. SMM complicates things as 64-bit CPUs use a different SMRAM save state area. KVM handles this correctly for 64-bit kernels, e.g. uses the legacy save state map if userspace has hid long mode from the guest, but doesn't fare well when userspace reports long mode support on a 32-bit host kernel (32-bit KVM doesn't support 64-bit guests). Since the alternative is to crash the guest, e.g. by not loading state or explicitly requesting shutdown, unconditionally use the legacy SMRAM save state map for 32-bit KVM. If a guest has managed to get far enough to handle SMIs when running under a weird/buggy userspace hypervisor, then don't deliberately crash the guest since there are no downsides (from KVM's perspective) to allow it to continue running. Fixes: 660a5d51 ("KVM: x86: save/load state on SMM switch") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Neither AMD nor Intel CPUs have an EFER field in the legacy SMRAM save state area, i.e. don't save/restore EFER across SMM transitions. KVM somewhat models this, e.g. doesn't clear EFER on entry to SMM if the guest doesn't support long mode. But during RSM, KVM unconditionally clears EFER so that it can get back to pure 32-bit mode in order to start loading CRs with their actual non-SMM values. Clear EFER only when it will be written when loading the non-SMM state so as to preserve bits that can theoretically be set on 32-bit vCPUs, e.g. KVM always emulates EFER_SCE. And because CR4.PAE is cleared only to play nice with EFER, wrap that code in the long mode check as well. Note, this may result in a compiler warning about cr4 being consumed uninitialized. Re-read CR4 even though it's technically unnecessary, as doing so allows for more readable code and RSM emulation is not a performance critical path. Fixes: 660a5d51 ("KVM: x86: save/load state on SMM switch") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
RSM emulation is currently broken on VMX when the interrupted guest has CR4.VMXE=1. Stop dancing around the issue of HF_SMM_MASK being set when loading SMSTATE into architectural state, e.g. by toggling it for problematic flows, and simply clear HF_SMM_MASK prior to loading architectural state (from SMRAM save state area). Reported-by:
Jon Doron <arilou@gmail.com> Cc: Jim Mattson <jmattson@google.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Fixes: 5bea5123 ("KVM: VMX: check nested state and CR4.VMXE against SMM") Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Tested-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Prepare for clearing HF_SMM_MASK prior to loading state from the SMRAM save state map, i.e. kvm_smm_changed() needs to be called after state has been loaded and so cannot be done automatically when setting hflags from RSM. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
RSM emulation is currently broken on VMX when the interrupted guest has CR4.VMXE=1. Rather than dance around the issue of HF_SMM_MASK being set when loading SMSTATE into architectural state, ideally RSM emulation itself would be reworked to clear HF_SMM_MASK prior to loading non-SMM architectural state. Ostensibly, the only motivation for having HF_SMM_MASK set throughout the loading of state from the SMRAM save state area is so that the memory accesses from GET_SMSTATE() are tagged with role.smm. Load all of the SMRAM save state area from guest memory at the beginning of RSM emulation, and load state from the buffer instead of reading guest memory one-by-one. This paves the way for clearing HF_SMM_MASK prior to loading state, and also aligns RSM with the enter_smm() behavior, which fills a buffer and writes SMRAM save state in a single go. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Liran Alon authored
Issue was discovered when running kvm-unit-tests on KVM running as L1 on top of Hyper-V. When vmx_instruction_intercept unit-test attempts to run RDPMC to test RDPMC-exiting, it is intercepted by L1 KVM which it's EXIT_REASON_RDPMC handler raise #GP because vCPU exposed by Hyper-V doesn't support PMU. Instead of unit-test expectation to be reflected with EXIT_REASON_RDPMC. The reason vmx_instruction_intercept unit-test attempts to run RDPMC even though Hyper-V doesn't support PMU is because L1 expose to L2 support for RDPMC-exiting. Which is reasonable to assume that is supported only in case CPU supports PMU to being with. Above issue can easily be simulated by modifying vmx_instruction_intercept config in x86/unittests.cfg to run QEMU with "-cpu host,+vmx,-pmu" and run unit-test. To handle issue, change KVM to expose RDPMC-exiting only when guest supports PMU. Reported-by:
Saar Amar <saaramar@microsoft.com> Reviewed-by:
Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
Liran Alon <liran.alon@oracle.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Liran Alon authored
Before this change, reading a VMware pseduo PMC will succeed even when PMU is not supported by guest. This can easily be seen by running kvm-unit-test vmware_backdoors with "-cpu host,-pmu" option. Reviewed-by:
Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by:
Liran Alon <liran.alon@oracle.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
WANG Chao authored
guest xcr0 could leak into host when MCE happens in guest mode. Because do_machine_check() could schedule out at a few places. For example: kvm_load_guest_xcr0 ... kvm_x86_ops->run(vcpu) { vmx_vcpu_run vmx_complete_atomic_exit kvm_machine_check do_machine_check do_memory_failure memory_failure lock_page In this case, host_xcr0 is 0x2ff, guest vcpu xcr0 is 0xff. After schedule out, host cpu has guest xcr0 loaded (0xff). In __switch_to { switch_fpu_finish copy_kernel_to_fpregs XRSTORS If any bit i in XSTATE_BV[i] == 1 and xcr0[i] == 0, XRSTORS will generate #GP (In this case, bit 9). Then ex_handler_fprestore kicks in and tries to reinitialize fpu by restoring init fpu state. Same story as last #GP, except we get DOUBLE FAULT this time. Cc: stable@vger.kernel.org Signed-off-by:
WANG Chao <chao.wang@ucloud.cn> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Vitaly Kuznetsov authored
I noticed that apic test from kvm-unit-tests always hangs on my EPYC 7401P, the hanging test nmi-after-sti is trying to deliver 30000 NMIs and tracing shows that we're sometimes able to deliver a few but never all. When we're trying to inject an NMI we may fail to do so immediately for various reasons, however, we still need to inject it so enable_nmi_window() arms nmi_singlestep mode. #DB occurs as expected, but we're not checking for pending NMIs before entering the guest and unless there's a different event to process, the NMI will never get delivered. Make KVM_REQ_EVENT request on the vCPU from db_interception() to make sure pending NMIs are checked and possibly injected. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Suthikulpanit, Suravee authored
Only clear the valid bit when invalidate logical APIC id entry. The current logic clear the valid bit, but also set the rest of the bits (including reserved bits) to 1. Fixes: 98d90582 ('svm: Fix AVIC DFR and LDR handling') Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Suthikulpanit, Suravee authored
This reverts commit bb218fbc. As Oren Twaig pointed out the old discussion: https://patchwork.kernel.org/patch/8292231/ that the change coud potentially cause an extra IPI to be sent to the destination vcpu because the AVIC hardware already set the IRR bit before the incomplete IPI #VMEXIT with id=1 (target vcpu is not running). Since writting to ICR and ICR2 will also set the IRR. If something triggers the destination vcpu to get scheduled before the emulation finishes, then this could result in an additional IPI. Also, the issue mentioned in the commit bb218fbc was misdiagnosed. Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reported-by:
Oren Twaig <oren@scalemp.com> Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Ben Gardon authored
KVM bases its memory usage limits on the total number of guest pages across all memslots. However, those limits, and the calculations to produce them, use 32 bit unsigned integers. This can result in overflow if a VM has more guest pages that can be represented by a u32. As a result of this overflow, KVM can use a low limit on the number of MMU pages it will allocate. This makes KVM unable to map all of guest memory at once, prompting spurious faults. Tested: Ran all kvm-unit-tests on an Intel Haswell machine. This patch introduced no new failures. Signed-off-by:
Ben Gardon <bgardon@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
The remaining failures of vmx.flat when EPT is disabled are caused by incorrectly reflecting VMfails to the L1 hypervisor. What happens is that nested_vmx_restore_host_state corrupts the guest CR3, reloading it with the host's shadow CR3 instead, because it blindly loads GUEST_CR3 from the vmcs01. For simplicity let's just always use hardware VMCS checks when EPT is disabled. This way, nested_vmx_restore_host_state is not reached at all (or at least shouldn't be reached). Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
As mentioned in the comment, there are some special cases where we can simply clear the TPR shadow bit from the CPU-based execution controls in the vmcs02. Handle them so that we can remove some XFAILs from vmx.flat. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Apr 15, 2019
-
-
Sean Christopherson authored
A recently introduced helper for handling zap vs. remote flush incorrectly bails early, effectively leaking defunct shadow pages. Manifests as a slab BUG when exiting KVM due to the shadow pages being alive when their associated cache is destroyed. ========================================================================== BUG kvm_mmu_page_header: Objects remaining in kvm_mmu_page_header on ... -------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0x00000000fc436387 objects=26 used=23 fp=0x00000000d023caee ... CPU: 6 PID: 4315 Comm: rmmod Tainted: G B 5.1.0-rc2+ #19 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack+0x46/0x5b slab_err+0xad/0xd0 ? on_each_cpu_mask+0x3c/0x50 ? ksm_migrate_page+0x60/0x60 ? on_each_cpu_cond_mask+0x7c/0xa0 ? __kmalloc+0x1ca/0x1e0 __kmem_cache_shutdown+0x13a/0x310 shutdown_cache+0xf/0x130 kmem_cache_destroy+0x1d5/0x200 kvm_mmu_module_exit+0xa/0x30 [kvm] kvm_arch_exit+0x45/0x60 [kvm] kvm_exit+0x6f/0x80 [kvm] vmx_exit+0x1a/0x50 [kvm_intel] __x64_sys_delete_module+0x153/0x1f0 ? exit_to_usermode_loop+0x88/0xc0 do_syscall_64+0x4f/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: a2113634 ("KVM: x86/mmu: Split remote_flush+zap case out of kvm_mmu_flush_or_zap()") Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Apr 10, 2019
-
-
Brian Norris authored
Badly-designed systems might have (for example) active-high wake pins that default to high (e.g., because of external pull ups) until they have an active firmware which starts driving it low. This can cause an interrupt storm in the time between request_irq() and disable_irq(). We don't support shared interrupts here, so let's just pre-configure the interrupt to avoid auto-enabling it. Fixes: fd913ef7 ("Bluetooth: btusb: Add out-of-band wakeup support") Fixes: 5364a0b4 ("arm64: dts: rockchip: move QCA6174A wakeup pin into its USB node") Signed-off-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Paul Burton: "A few minor MIPS fixes: - Provide struct pt_regs * from get_irq_regs() to kgdb_nmicallback() when handling an IPI triggered by kgdb_roundup_cpus(), matching the behavior of other architectures & resolving kgdb issues for SMP systems. - Defer a pointer dereference until after a NULL check in the irq_shutdown callback for SGI IP27 HUB interrupts. - A defconfig update for the MSCC Ocelot to enable some necessary drivers" * tag 'mips_fixes_5.1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: generic: Add switchdev, pinctrl and fit to ocelot_defconfig MIPS: SGI-IP27: Fix use of unchecked pointer in shutdown_bridge_irq MIPS: KGDB: fix kgdb support for SMP platforms.
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc fixes from Al Viro: "A few regression fixes from this cycle" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: aio: use kmem_cache_free() instead of kfree() iov_iter: Fix build error without CONFIG_CRYPTO aio: Fix an error code in __io_submit_one()
-
- Apr 09, 2019
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Off by one and bounds checking fixes in NFC, from Dan Carpenter. 2) There have been many weird regressions in r8169 since we turned ASPM support on, some are still not understood nor completely resolved. Let's turn this back off for now. From Heiner Kallweit. 3) Signess fixes for ethtool speed value handling, from Michael Zhivich. 4) Handle timestamps properly in macb driver, from Paul Thomas. 5) Two erspan fixes, it's the usual "skb ->data potentially reallocated and we're holding a stale protocol header pointer". From Lorenzo Bianconi. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: bnxt_en: Reset device on RX buffer errors. bnxt_en: Improve RX consumer index validity check. net: macb driver, check for SKBTX_HW_TSTAMP qlogic: qlcnic: fix use of SPEED_UNKNOWN ethtool constant broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constant ethtool: avoid signed-unsigned comparison in ethtool_validate_speed() net: ip6_gre: fix possible use-after-free in ip6erspan_rcv net: ip_gre: fix possible use-after-free in erspan_rcv r8169: disable ASPM again MAINTAINERS: ieee802154: update documentation file pattern net: vrf: Fix ping failed when vrf mtu is set to 0 selftests: add a tc matchall test case nfc: nci: Potential off by one in ->pipes[] array NFC: nci: Add some bounds checking in nci_hci_cmd_received()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull TPM fixes from James Morris: "From Jarkko: These are critical fixes for v5.1. Contains also couple of new selftests for v5.1 features (partial reads in /dev/tpm0)" * 'fixes-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selftests/tpm2: Open tpm dev in unbuffered mode selftests/tpm2: Extend tests to cover partial reads KEYS: trusted: fix -Wvarags warning tpm: Fix the type of the return value in calc_tpm2_event_size() KEYS: trusted: allow trusted.ko to initialize w/o a TPM tpm: fix an invalid condition in tpm_common_poll tpm: turn on TPM on suspend for TPM 1.x
-
git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull xtensa fixes from Max Filippov: - fix syscall number passed to trace_sys_exit - fix syscall number initialization in start_thread - fix level interpretation in the return_address - fix format string warning in init_pmd * tag 'xtensa-20190408' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix format string warning in init_pmd xtensa: fix return_address xtensa: fix initialization of pt_regs::syscall in start_thread xtensa: use actual syscall number in do_syscall_trace_leave
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: 2 bug fixes. The first patch prevents possible driver crash if we get a bad RX index from the hardware. The second patch resets the device when the hardware reports buffer error to recover from the error. Please queue these for -stable also. Thanks. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
If the RX completion indicates RX buffers errors, the RX ring will be disabled by firmware and no packets will be received on that ring from that point on. Recover by resetting the device. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
There is logic to check that the RX/TPA consumer index is the expected index to work around a hardware problem. However, the potentially bad consumer index is first used to index into an array to reference an entry. This can potentially crash if the bad consumer index is beyond legal range. Improve the logic to use the consumer index for dereferencing after the validity check and log an error message. Fixes: fa7e2812 ("bnxt_en: Add workaround to detect bad opaque in rx completion (part 2)") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paul Thomas authored
Make sure SKBTX_HW_TSTAMP (i.e. SOF_TIMESTAMPING_TX_HARDWARE) has been enabled for this skb. It does fix the issue where normal socks that aren't expecting a timestamp will not wake up on select, but when a user does want a SOF_TIMESTAMPING_TX_HARDWARE it does work. Signed-off-by:
Paul Thomas <pthomas8589@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael Zhivich says: ==================== ethtool: fix use of SPEED_UNKNOWN constant This patch series addresses 2 related issues: 1. ethtool_validate_speed() triggers a "signed-unsigned comparison" warning due to type difference of SPEED_UNKNOWN constant (int) and argument to ethtool_validate_speed (__u32). 2. some drivers use u16 storage for SPEED_UNKNOWN constant, resulting in value truncation and thus failure to test against SPEED_UNKNOWN correctly. This revised series addresses several feedback comments: - split up the patch in to series - do not unnecessarily change drivers that use "int" storage for speed values ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Zhivich authored
qlcnic driver uses u16 to store SPEED_UKNOWN ethtool constant, which is defined as -1, resulting in value truncation and thus incorrect test results against SPEED_UNKNOWN. For example, the following test will print "False": u16 speed = SPEED_UNKNOWN; if (speed == SPEED_UNKNOWN) printf("True"); else printf("False"); Change storage of speed to use u32 to avoid this issue. Signed-off-by:
Michael Zhivich <mzhivich@akamai.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Zhivich authored
tg3 driver uses u16 to store SPEED_UKNOWN ethtool constant, which is defined as -1, resulting in value truncation and thus incorrect test results against SPEED_UNKNOWN. For example, the following test will print "False": u16 speed = SPEED_UNKNOWN; if (speed == SPEED_UNKNOWN) printf("True"); else printf("False"); Change storage of speed to use u32 to avoid this issue. Signed-off-by:
Michael Zhivich <mzhivich@akamai.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Zhivich authored
When building C++ userspace code that includes ethtool.h with "-Werror -Wall", g++ complains about signed-unsigned comparison in ethtool_validate_speed() due to definition of SPEED_UNKNOWN as -1. Explicitly cast SPEED_UNKNOWN to __u32 to match type of ethtool_validate_speed() argument. Signed-off-by:
Michael Zhivich <mzhivich@akamai.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Lorenzo Bianconi says: ==================== fix possible use-after-free in erspan_v{4,6} Similar to what I did in commit bb9bd814 ("ipv6: sit: reset ip header pointer in ipip6_rcv"), fix possible use-after-free in erspan_rcv and ip6erspan_rcv extracting tunnel metadata since the packet can be 'uncloned' running __iptunnel_pull_header ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
erspan_v6 tunnels run __iptunnel_pull_header on received skbs to remove erspan header. This can determine a possible use-after-free accessing pkt_md pointer in ip6erspan_rcv since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device). Fix it resetting pkt_md pointer after __iptunnel_pull_header Fixes: 1d7e2ed2 ("net: erspan: refactor existing erspan code") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
erspan tunnels run __iptunnel_pull_header on received skbs to remove gre and erspan headers. This can determine a possible use-after-free accessing pkt_md pointer in erspan_rcv since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device). Fix it resetting pkt_md pointer after __iptunnel_pull_header Fixes: 1d7e2ed2 ("net: erspan: refactor existing erspan code") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tadeusz Struk authored
In order to have control over how many bytes are read or written the device needs to be opened in unbuffered mode. Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
James Morris <james.morris@microsoft.com>
-