- Oct 19, 2007
-
-
Rafael J. Wysocki authored
Move the definition of 'struct pm_ops' and related functions from <linux/pm.h> to <linux/suspend.h> . There are, at least, the following reasons to do that: * 'struct pm_ops' is specifically related to suspend and not to the power management in general. * As long as 'struct pm_ops' is defined in <linux/pm.h>, any modification of it causes the entire kernel to be recompiled, which is unnecessary and annoying. * Some suspend-related features are already defined in <linux/suspend.h>, so it is logical to move the definition of 'struct pm_ops' into there. * 'struct hibernation_ops', being the hibernation-related counterpart of 'struct pm_ops', is defined in <linux/suspend.h> . Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Adrian Bunk authored
suspend_enter() can now become static. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ralf Baechle authored
This has not been any serious user of this ill conceived thing since the original invention in like '95 so I recently deleted this from everywhere except the last instance in logo.c. This patch removes the last two instances in logo.c. They conditions were not useful anyway as when compiled in they would always evaluate as true. Last not least this is necessary to get the SGI IP22 and DECstation kernels to compile again. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Maciej W. Rozycki authored
The tty_termios_encode_baud_rate() function as defined by tty_ioctl.c has a problem with the baud_table within. The comparison operators are reversed and as a result this table's entries never match and BOTHER is always used. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Engelhardt authored
Since default_utf8 is already a sysfs attribute, having an extra CONFIG_VT_UNICODE compile-time option is redundant, since sysfs attributes can be set at boot and run time. Also let Linux VCs default to UTF-8 (as per the discussion at http://lkml.org/lkml/2007/9/6/99). Signed-off-by:
Jan Engelhardt <jengelh@computergmbh.de> Cc: Bill Nottingham <notting@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Signed-off-by@vergenet.net":Simon authored
I'm not sure that the new URL satifies the requirement of status/info, but it does at least as good a job as the old URL, and contains current releases of kexec-tools, rather than somewhat ancient versions. Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Karsten Keil authored
The patch - Includes the call to capilib_data_b3_req in the spinlock. This routine in turn calls the offending mq_enqueue routine that triggered the freeze if not locked. This should also fix other indicators of incosistent capilib_msgidqueue list, that trigger messages like: Oct 5 03:05:57 BERL0 kernel: kcapi: msgid 3019 ncci 0x30301 not on queue that we saw several times a day (usually several in a row). - Fixes all occurrences of c4_dispatch_tx to be called with active spinlock, there were some instances where no lock was active. Mostly these are in very infrequently called routines, so the additional performance penalty is minimal. Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
Rainer Brestan <rainer.brestan@frequentis.com> Signed-off-by:
Ralf Schlatterbeck <rsc@runtux.com> Cc: <stable@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Karsten Keil authored
This fix the same issue which was debbuged for the C4 controller for the B1 versions. The capilib_ function modify or traverse a linked list without locking. This patch extends the existing locking to the calls of these function to prevent access to a list which is in the middle of a modification. Signed-off-by:
Karsten Keil <kkeil@suse.de> C: <stable@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ralf Baechle authored
MODPOST vmlinux.o WARNING: vmlinux.o(.text+0x170be8): Section mismatch: reference to .init.data:au1100fb_fix (between 'au1100fb_drv_probe' and 'read_null') WARNING: vmlinux.o(.text+0x170dc4): Section mismatch: reference to .init.data:au1100fb_var (between 'au1100fb_drv_probe' and 'read_null') WARNING: vmlinux.o(.text+0x170dd0): Section mismatch: reference to .init.data:au1100fb_fix (between 'au1100fb_drv_probe' and 'read_null') WARNING: vmlinux.o(.text+0x170de0): Section mismatch: reference to .init.data:au1100fb_var (between 'au1100fb_drv_probe' and 'read_null') WARNING: vmlinux.o(.text+0x170e70): Section mismatch: reference to .init.data:au1100fb_var (between 'au1100fb_drv_probe' and 'read_null') Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ralf Baechle authored
Fix build broken by accaa24c : CC drivers/video/console/newport_con.o drivers/video/console/newport_con.c: In function 'newport_show_logo': drivers/video/console/newport_con.c:111: error: assignment of read-only location drivers/video/console/newport_con.c:111: warning: assignment makes integer from pointer without a cast drivers/video/console/newport_con.c:112: error: assignment of read-only location drivers/video/console/newport_con.c:112: warning: assignment makes integer from pointer without a cast Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Oct 18, 2007
-
-
Eric Sandeen authored
When resizing online, setup_new_group_blocks attempts to reserve a potentially very large transaction, depending on the current filesystem geometry. For some journal sizes, there may not be enough room for this transaction, and the online resize will fail. The patch below resizes & restarts the transaction as necessary while setting up the new group, and should work with even the smallest journal. Tested with something like: [root@newbox ~]# dd if=/dev/zero of=fsfile bs=1024 count=32768 [root@newbox ~]# mkfs.ext3 -b 1024 fsfile 16384 [root@newbox ~]# mount -o loop fsfile mnt/ [root@newbox ~]# resize2fs /dev/loop0 resize2fs 1.40.2 (12-Jul-2007) Filesystem at /dev/loop0 is mounted on /root/mnt; on-line resizing required old desc_blocks = 1, new_desc_blocks = 1 Performing an on-line resize of /dev/loop0 to 32768 (1k) blocks. resize2fs: No space left on device While trying to add group #2 [root@newbox ~]# dmesg | tail -n 1 JBD: resize2fs wants too many credits (258 > 256) [root@newbox ~]# With the below change, it works. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Mingming Cao <cmm@us.ibm.com> Acked-by:
Andreas Dilger <adilger@clusterfs.com>
-
Eric Sandeen authored
setup_new_group_blocks() manipulates the group descriptor block bh under the block_bitmap bh's lock. It shouldn't matter since nobody but resize should be touching these blocks, but it's worth fixing up. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Mingming Cao <cmm@us.ibm.com>
-
Aneesh Kumar K.V authored
Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
Aneesh Kumar K.V authored
Convert ext4_extent_idx.ei_leaf ext4_extent_idx.ei_leaf_lo This helps in finding BUGs due to direct partial access of these split 48 bit values. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
Aneesh Kumar K.V authored
Convert ext4_extent.ee_start to ext4_extent.ee_start_lo This helps in finding BUGs due to direct partial access of these split 48 bit values Also fix direct partial access in ext4 code Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
Aneesh Kumar K.V authored
Convert s_r_blocks_count and s_free_blocks_count to s_r_blocks_count_lo and s_free_blocks_count_lo This helps in finding BUGs due to direct partial access of these split 64 bit values Also fix direct partial access in ext4 code Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Aneesh Kumar K.V authored
Convert s_blocks_count to s_blocks_count_lo This helps in finding BUGs due to direct partial access of these split 64 bit values Also fix direct partial access in ext4 code Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
Aneesh Kumar K.V authored
Convert bg_inode_bitmap and bg_inode_table to bg_inode_bitmap_lo and bg_inode_table_lo. This helps in finding BUGs due to direct partial access of these split 64 bit values Also fix one direct partial access Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
Aneesh Kumar K.V authored
Convert bg_block_bitmap to bg_block_bitmap_lo This helps in catching some BUGS due to direct partial access of these split fields. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
Jose R. Santos authored
This feature relaxes check restrictions on where each block groups meta data is located within the storage media. This allows for the allocation of bitmaps or inode tables outside the block group boundaries in cases where bad blocks forces us to look for new blocks which the owning block group can not satisfy. This will also allow for new meta-data allocation schemes to improve performance and scalability. Signed-off-by:
Jose R. Santos <jrs@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Aneesh Kumar K.V authored
Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Andreas Dilger authored
In pass1 of e2fsck, every inode table in the fileystem is scanned and checked, regardless of whether it is in use. This is this the most time consuming part of the filesystem check. The unintialized block group feature can greatly reduce e2fsck time by eliminating checking of uninitialized inodes. With this feature, there is a a high water mark of used inodes for each block group. Block and inode bitmaps can be uninitialized on disk via a flag in the group descriptor to avoid reading or scanning them at e2fsck time. A checksum of each group descriptor is used to ensure that corruption in the group descriptor's bit flags does not cause incorrect operation. The feature is enabled through a mkfs option mke2fs /dev/ -O uninit_groups A patch adding support for uninitialized block groups to e2fsprogs tools has been posted to the linux-ext4 mailing list. The patches have been stress tested with fsstress and fsx. In performance tests testing e2fsck time, we have seen that e2fsck time on ext3 grows linearly with the total number of inodes in the filesytem. In ext4 with the uninitialized block groups feature, the e2fsck time is constant, based solely on the number of used inodes rather than the total inode count. Since typical ext4 filesystems only use 1-10% of their inodes, this feature can greatly reduce e2fsck time for users. With performance improvement of 2-20 times, depending on how full the filesystem is. The attached graph shows the major improvements in e2fsck times in filesystems with a large total inode count, but few inodes in use. In each group descriptor if we have EXT4_BG_INODE_UNINIT set in bg_flags: Inode table is not initialized/used in this group. So we can skip the consistency check during fsck. EXT4_BG_BLOCK_UNINIT set in bg_flags: No block in the group is used. So we can skip the block bitmap verification for this group. We also add two new fields to group descriptor as a part of uninitialized group patch. __le16 bg_itable_unused; /* Unused inodes count */ __le16 bg_checksum; /* crc16(sb_uuid+group+desc) */ bg_itable_unused: If we have EXT4_BG_INODE_UNINIT not set in bg_flags then bg_itable_unused will give the offset within the inode table till the inodes are used. This can be used by fsck to skip list of inodes that are marked unused. bg_checksum: Now that we depend on bg_flags and bg_itable_unused to determine the block and inode usage, we need to make sure group descriptor is not corrupt. We add checksum to group descriptor to detect corruption. If the descriptor is found to be corrupt, we mark all the blocks and inodes in the group used. Signed-off-by:
Avantika Mathur <mathur@us.ibm.com> Signed-off-by:
Andreas Dilger <adilger@clusterfs.com> Signed-off-by:
Mingming Cao <cmm@us.ibm.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
Eric Sandeen authored
CONFIG_EXT4_INDEX is not an exposed config option in the kernel, and it is unconditionally defined in ext4_fs.h. tune2fs is already able to turn off dir indexing, so at this point it's just cluttering up the code. Remove it. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Mingming Cao <cmm@us.ibm.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Coly Li authored
Fragment support in ext2/3/4 was never implemented, and it probably will never be implemented. So remove it from ext4. Signed-off-by:
Coly Li <coyli@suse.de> Acked-by:
Andreas Dilger <adilger@clusterfs.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Jose R. Santos authored
Mostly stolen from akpm's JBD cleanup patch. - use `#ifdef foo' instead of `#if defined(foo)' - Make journal_enable_debug __read_mostly just for the heck of it - Make jbd_debugfs_dir and jbd_debug static - debugfs_remove(NULL) is legal: remove unneeded tests - remove unnecessary empty loops Signed-off-by:
Jose R. Santos <jrs@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Jan Kara authored
We should really call journal_abort() and not __journal_abort_hard() in case of errors. The latter call does not record the error in the journal superblock and thus filesystem won't be marked as with errors later (and user could happily mount it without any warning). Signed-off-by:
Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Mingming Cao authored
change JBD_XXX macros to JBD2_XXX in JBD2/Ext4 Signed-off-by:
Mingming Cao <cmm@us.ibm.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Mingming Cao authored
Convert kmalloc to kzalloc() and get rid of the memset(). Signed-off-by:
Mingming Cao <cmm@us.ibm.com>
-
Mingming Cao authored
This patch cleans up jbd_kmalloc and replace it with kmalloc directly Signed-off-by:
Mingming Cao <cmm@us.ibm.com>
-
Mingming Cao authored
This patch cleans up jbd_kmalloc and replace it with kmalloc directly Signed-off-by:
Mingming Cao <cmm@us.ibm.com>
-
Mingming Cao authored
JBD2: Replace slab allocations with page allocations JBD2 allocate memory for committed_data and frozen_data from slab. However JBD2 should not pass slab pages down to the block layer. Use page allocator pages instead. This will also prepare JBD for the large blocksize patchset. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
Mingming Cao <cmm@us.ibm.com>
-
Mingming Cao authored
JBD: Replace slab allocations with page allocations JBD allocate memory for committed_data and frozen_data from slab. However JBD should not pass slab pages down to the block layer. Use page allocator pages instead. This will also prepare JBD for the large blocksize patchset. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
Mingming Cao <cmm@us.ibm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix non-numa build
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fsLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: remove sysctl 9p: fix bad kconfig cross-dependency 9p: soften invalidation in loose_mode 9p: attach-per-user 9p: rename uid and gid parameters 9p: define session flags 9p: Make transports dynamic
-
Andrew Morton authored
arch/ia64/kernel/machine_kexec.c: In function `arch_crash_save_vmcoreinfo': arch/ia64/kernel/machine_kexec.c:131: error: `pgdat_list' undeclared (first use in this function) arch/ia64/kernel/machine_kexec.c:131: error: (Each undeclared identifier is reported only once arch/ia64/kernel/machine_kexec.c:131: error: for each function it appears in.) arch/ia64/kernel/machine_kexec.c:134: error: `node_memblk' undeclared (first use in this function) arch/ia64/kernel/machine_kexec.c:135: error: `NR_NODE_MEMBLKS' undeclared (first use in this function) arch/ia64/kernel/machine_kexec.c:136: error: invalid application of `sizeof' to incomplete type `node_memblk_s' arch/ia64/kernel/machine_kexec.c:137: error: dereferencing pointer to incomplete type arch/ia64/kernel/machine_kexec.c:138: error: dereferencing pointer to incomplete type make[1]: *** [arch/ia64/kernel/machine_kexec.o] Error 1 Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Tony Luck <tony.luck@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmcLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: net: libertas sdio driver mmc: at91_mci: cleanup: use MCI_ERRORS mmc: possible leak in mmc_read_ext_csd
-
Pierre Ossman authored
Add driver for Marvell's Libertas 8385 and 8686 wifi chips. Signed-off-by:
Pierre Ossman <drzeus@drzeus.cx> Acked-by:
Dan Williams <dcbw@redhat.com>
-
ssh://master.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-x86Linus Torvalds authored
* ssh://master.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-x86: (114 commits) x86: delete vsyscall files during make clean kbuild: fix typo SRCARCH in find_sources x86: fix kernel rebuild due to vsyscall fallout .gitignore update for x86 arch x86: unify include/asm/debugreg_32/64.h x86: unify include/asm/unwind_32/64.h x86: unify include/asm/types_32/64.h x86: unify include/asm/tlb_32/64.h x86: unify include/asm/siginfo_32/64.h x86: unify include/asm/bug_32/64.h x86: unify include/asm/mman_32/64.h x86: unify include/asm/agp_32/64.h x86: unify include/asm/kdebug_32/64.h x86: unify include/asm/ioctls_32/64.h x86: unify include/asm/floppy_32/64.h x86: apply missing DMA/OOM prevention to floppy_32.h x86: unify include/asm/cache_32/64.h x86: unify include/asm/cache_32/64.h x86: unify include/asm/dmi_32/64.h x86: unify include/asm/delay_32/64.h ...
-
Sam Ravnborg authored
make clean failed to delete a few files in x86/kernel. This is because kbuild does not see the correct/full kernel/Makefile. As a workaround until the Makefiles are merged specify the files to be deleted in the common Makefile. Reported by Mike Galbraith <efault@gmx.de> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-