- May 12, 2022
-
-
Yang Yingliang authored
commit 95098d5a upstream. 'tmp_node' need be put before returning from cpsw_probe_dt(), so add missing of_node_put() in error path. Fixes: ed3525ed ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Niels Dossche authored
commit e87f66b3 upstream. Error values inside the probe function must be < 0. The ENOMEM return value has the wrong sign: it is positive instead of negative. Add a minus sign. Fixes: e2397567 ("net: mdio: Add BCM6368 MDIO mux bus controller") Signed-off-by:
Niels Dossche <dossche.niels@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220428211931.8130-1-dossche.niels@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yang Yingliang authored
commit 1a15267b upstream. The node pointer returned by of_get_child_by_name() with refcount incremented, so add of_node_put() after using it. Fixes: 634db83b ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220428095716.540452-1-yangyingliang@huawei.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yang Yingliang authored
commit a9e9b091 upstream. Add of_node_put() if of_get_phy_mode() fails in mt7530_setup() Fixes: 0c65b2b9 ("net: of_get_phy_mode: Change API to solve int/unit warnings") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220428095317.538829-1-yangyingliang@huawei.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yang Yingliang authored
commit ff5265d4 upstream. The node pointer returned by of_parse_phandle() with refcount incremented, so add of_node_put() after using it in mtk_sgmii_init(). Fixes: 9ffee4a8 ("net: ethernet: mediatek: Extend SGMII related functions") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220428062543.64883-1-yangyingliang@huawei.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Trond Myklebust authored
commit 00c94ebe upstream. There is no need to declare attributes such as the ctime, mtime and block size invalid when we're just returning a delegation, so it is inappropriate to call nfs_post_op_update_inode_force_wcc(). Instead, just call nfs_refresh_inode() after faking up the change attribute. We know that the GETATTR op occurs before the DELEGRETURN, so we are safe when doing this. Fixes: 0bc2c9b4 ("NFSv4: Don't discard the attributes returned by asynchronous DELEGRETURN") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mustafa Ismail authored
commit 1c9043ae upstream. For some net events in irdma_net_event notifier, the netdev can be NULL which will cause a crash in rdma_vlan_dev_real_dev. Fix this by moving all processing to the NETEVENT_NEIGH_UPDATE case where the netdev is guaranteed to not be NULL. Fixes: 6702bc14 ("RDMA/irdma: Fix netdev notifications for vlan's") Link: https://lore.kernel.org/r/20220425181703.1634-4-shiraz.saleem@intel.com Signed-off-by:
Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shiraz Saleem authored
commit 2df6d895 upstream. QP destroy is synchronous and waits for its refcnt to be decremented in irdma_cm_node_free_cb (for iWARP) which fires after the RCU grace period elapses. Applications running a large number of connections are exposed to high wait times on destroy QP for events like SIGABORT. The long pole for this wait time is the firing of the call_rcu callback during a CM node destroy which can be slow. It holds the QP reference count and blocks the destroy QP from completing. call_rcu only needs to make sure that list walkers have a reference to the cm_node object before freeing it and thus need to wait for grace period elapse. The rest of the connection teardown in irdma_cm_node_free_cb is moved out of the grace period wait in irdma_destroy_connection. Also, replace call_rcu with a simple kfree_rcu as it just needs to do a kfree on the cm_node Fixes: 146b9756 ("RDMA/irdma: Add connection manager") Link: https://lore.kernel.org/r/20220425181703.1634-3-shiraz.saleem@intel.com Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tatyana Nikolova authored
commit 7b8943b8 upstream. When connection establishment fails in iWARP mode, an app can drain the QPs and hang because flush isn't issued when the QP is modified from RTR state to error. Issue a flush in this case using function irdma_cm_disconn(). Update irdma_cm_disconn() to do flush when cm_id is NULL, which is the case when the QP is in RTR state and there is an error in the connection establishment. Fixes: b48c24c2 ("RDMA/irdma: Implement device supported verb APIs") Link: https://lore.kernel.org/r/20220425181703.1634-2-shiraz.saleem@intel.com Signed-off-by:
Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Cheng Xu authored
commit ef91271c upstream. The calling of siw_cm_upcall and detaching new_cep with its listen_cep should be atomistic semantics. Otherwise siw_reject may be called in a temporary state, e,g, siw_cm_upcall is called but the new_cep->listen_cep has not being cleared. This fixes a WARN: WARNING: CPU: 7 PID: 201 at drivers/infiniband/sw/siw/siw_cm.c:255 siw_cep_put+0x125/0x130 [siw] CPU: 2 PID: 201 Comm: kworker/u16:22 Kdump: loaded Tainted: G E 5.17.0-rc7 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: iw_cm_wq cm_work_handler [iw_cm] RIP: 0010:siw_cep_put+0x125/0x130 [siw] Call Trace: <TASK> siw_reject+0xac/0x180 [siw] iw_cm_reject+0x68/0xc0 [iw_cm] cm_work_handler+0x59d/0xe20 [iw_cm] process_one_work+0x1e2/0x3b0 worker_thread+0x50/0x3a0 ? rescuer_thread+0x390/0x390 kthread+0xe5/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: 6c52fdc2 ("rdma/siw: connection management") Link: https://lore.kernel.org/r/d528d83466c44687f3872eadcb8c184528b2e2d4.1650526554.git.chengyou@linux.alibaba.com Reported-by:
Luis Chamberlain <mcgrof@kernel.org> Reviewed-by:
Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by:
Cheng Xu <chengyou@linux.alibaba.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Olga Kornievskaia authored
commit e13433b4 upstream. A relocated task must release its previous transport. Fixes: 82ee41b8 ("SUNRPC don't resend a task on an offlined transport") Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jann Horn authored
commit 2bfed7d2 upstream. Since commit 92d25637 ("kselftest: signal all child processes"), tests are executed in background process groups. This means that trying to read from stdin now throws SIGTTIN when stdin is a TTY, which breaks some seccomp selftests that try to use read(0, NULL, 0) as a dummy syscall. The simplest way to fix that is probably to just use -1 instead of 0 as the dummy read()'s FD. Fixes: 92d25637 ("kselftest: signal all child processes") Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220319010011.1374622-1-jannh@google.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Moshe Shemesh authored
commit cb7786a7 upstream. The sync reset flow can lead to the following deadlock when poll_sync_reset() is called by timer softirq and waiting on del_timer_sync() for the same timer. Fix that by moving the part of the flow that waits for the timer to reset_reload_work. It fixes the following kernel Trace: RIP: 0010:del_timer_sync+0x32/0x40 ... Call Trace: <IRQ> mlx5_sync_reset_clear_reset_requested+0x26/0x50 [mlx5_core] poll_sync_reset.cold+0x36/0x52 [mlx5_core] call_timer_fn+0x32/0x130 __run_timers.part.0+0x180/0x280 ? tick_sched_handle+0x33/0x60 ? tick_sched_timer+0x3d/0x80 ? ktime_get+0x3e/0xa0 run_timer_softirq+0x2a/0x50 __do_softirq+0xe1/0x2d6 ? hrtimer_interrupt+0x136/0x220 irq_exit+0xae/0xb0 smp_apic_timer_interrupt+0x7b/0x140 apic_timer_interrupt+0xf/0x20 </IRQ> Fixes: 3c5193a8 ("net/mlx5: Use del_timer_sync in fw reset flow of halting poll") Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Reviewed-by:
Maher Sanalla <msanalla@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Moshe Shemesh authored
commit fc3d3db0 upstream. Double clear of reset requested state can lead to NULL pointer as it will try to delete the timer twice. This can happen for example on a race between abort from FW and pci error or reset. Avoid such case using test_and_clear_bit() to verify only one time reset requested state clear flow. Similarly use test_and_set_bit() to verify only one time reset requested state set flow. Fixes: 7dd6df32 ("net/mlx5: Handle sync reset abort event") Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Reviewed-by:
Maher Sanalla <msanalla@nvidia.com> Reviewed-by:
Shay Drory <shayd@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Zhang authored
commit c4d963a5 upstream. The arguments of update_buffer_lossy() is in a wrong order. Fix it. Fixes: 88b3d5c9 ("net/mlx5e: Fix port buffers cell size value") Signed-off-by:
Mark Zhang <markzhang@nvidia.com> Reviewed-by:
Maor Gottlieb <maorg@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Blakey authored
commit b069e14f upstream. __mlx5_tc_ct_entry_put() queues release of tuple related to some ct FT, if that is the last reference to that tuple, the actual deletion of the tuple can happen after the FT is already destroyed and freed. Flush the used workqueue before destroying the ct FT. Fixes: a2173131 ("net/mlx5e: CT: manage the lifetime of the ct entry object") Reviewed-by:
Oz Shlomo <ozsh@nvidia.com> Signed-off-by:
Paul Blakey <paulb@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vlad Buslov authored
commit ada09af9 upstream. Currently, match VLAN rule also matches packets that have multiple VLAN headers. This behavior is similar to buggy flower classifier behavior that has recently been fixed. Fix the issue by matching on outer_second_cvlan_tag with value 0 which will cause the HW to verify the packet doesn't contain second vlan header. Fixes: 699e96dd ("net/mlx5e: Support offloading tc double vlan headers match") Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
Maor Dickman <maord@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Moshe Tal authored
commit b781bff8 upstream. Setting dscp2prio during the driver reload can cause dcb ieee app list to be not empty after the reload finish and as a result to a conflict between the priority trust state reported by the app and the state in the device register. Reset the dcb ieee app list on initialization in case this is conflicting with the register status. Fixes: 2a5e7a13 ("net/mlx5e: Add dcbnl dscp to priority support") Signed-off-by:
Moshe Tal <moshet@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yang Yingliang authored
commit a15932f4 upstream. It will cause null-ptr-deref in resource_size(), if platform_get_resource() returns NULL, move calling resource_size() after devm_ioremap_resource() that will check 'res' to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code. Fixes: 46d1fb07 ("iommu/dart: Add DART iommu driver") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20220425090826.2532165-1-yangyingliang@huawei.com Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lu Baolu authored
commit da8669ff upstream. The page fault handling framework in the IOMMU core explicitly states that it doesn't handle PCI PASID Stop Marker and the IOMMU drivers must discard them before reporting faults. This handles Stop Marker messages in prq_event_thread() before reporting events to the core. The VT-d driver explicitly drains the pending page requests when a CPU page table (represented by a mm struct) is unbound from a PASID according to the procedures defined in the VT-d spec. The Stop Marker messages do not need a response. Hence, it is safe to drop the Stop Marker messages silently if any of them is found in the page request queue. Fixes: d5b9e4bf ("iommu/vt-d: Report prq to io-pgfault framework") Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by:
Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by:
Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20220421113558.3504874-1-baolu.lu@linux.intel.com Link: https://lore.kernel.org/r/20220423082330.3897867-2-baolu.lu@linux.intel.com Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pierre-Louis Bossart authored
commit eb577320 upstream. cppcheck throws the following warning: sound/soc/soc-ops.c:461:8: style: Variable 'ret' is assigned a value that is never used. [unreadVariable] ret = err; ^ This seems to be a missing change in the return value. Fixes: 7f3d90a3 ("ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_sx()") Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20220421162328.302017-1-pierre-louis.bossart@linux.intel.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Codrin Ciubotariu authored
commit 660564fc upstream. As pointed out by Sascha Hauer, this patch changes: if (pmc->config && !pcm->config->prepare_slave_config) <do nothing> to: if (pmc->config && !pcm->config->prepare_slave_config) snd_dmaengine_pcm_prepare_slave_config() This breaks the drivers that do not need a call to dmaengine_slave_config(). Drivers that still need to call snd_dmaengine_pcm_prepare_slave_config(), but have a NULL pcm->config->prepare_slave_config should use snd_dmaengine_pcm_prepare_slave_config() as their prepare_slave_config callback. Fixes: 9a1e1344 ("ASoC: dmaengine: do not use a NULL prepare_slave_config() callback") Reported-by:
Sascha Hauer <sha@pengutronix.de> Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20220421125403.2180824-1-codrin.ciubotariu@microchip.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adam Wujek authored
commit 75d2b2b0 upstream. Explicitly disable PEC when the client does not support it. The problematic scenario is the following. A device with enabled PEC support is up and running and a kernel driver is loaded. Then the driver is unloaded (or device unbound), the HW device is reconfigured externally (e.g. by i2cset) to advertise itself as not supporting PEC. Without a new code, at the second load of the driver (or bind) the "flags" variable is not updated to avoid PEC usage. As a consequence the further communication with the device is done with the PEC enabled, which is wrong and may fail. The implementation first disable the I2C_CLIENT_PEC flag, then the old code enable it if needed. Fixes: 4e5418f7 ("hwmon: (pmbus_core) Check adapter PEC support") Signed-off-by:
Adam Wujek <dev_public@wujek.eu> Link: https://lore.kernel.org/r/20220420145059.431061-1-dev_public@wujek.eu Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Armin Wolf authored
commit 7b2666ce upstream. When removing the adt7470 module, a warning might be printed: do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffffa006052b>] adt7470_update_thread+0x7b/0x130 [adt7470] This happens because adt7470_update_thread() can leave the kthread in TASK_INTERRUPTIBLE state when the kthread is being stopped before the call of set_current_state(). Since kthread_exit() might sleep in exit_signals(), the warning is printed. Fix that by using schedule_timeout_interruptible() and removing the call of set_current_state(). This causes TASK_INTERRUPTIBLE to be set after kthread_should_stop() which might cause the kthread to exit. Reported-by:
Zheyu Ma <zheyuma97@gmail.com> Fixes: 93cacfd4 (hwmon: (adt7470) Allow faster removal) Signed-off-by:
Armin Wolf <W_Armin@gmx.de> Tested-by:
Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/20220407101312.13331-1-W_Armin@gmx.de Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Puyou Lu authored
commit dba78579 upstream. When one port's input state get inverted (eg. from low to hight) after pca953x_irq_setup but before setting irq_mask (by some other driver such as "gpio-keys"), the next inversion of this port (eg. from hight to low) will not be triggered any more (because irq_stat is not updated at the first time). Issue should be fixed after this commit. Fixes: 89ea8bbe ("gpio: pca953x.c: add interrupt handling capability") Signed-off-by:
Puyou Lu <puyou.lu@gmail.com> Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nobuhiro Iwamatsu authored
commit 171865da upstream. The fwnode of GPIO IRQ must be set to its own fwnode, not the fwnode of the parent IRQ. Therefore, this sets own fwnode instead of the parent IRQ fwnode to GPIO IRQ's. Fixes: 2ad74f40 ("gpio: visconti: Add Toshiba Visconti GPIO support") Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Duoming Zhou authored
commit 4071bf12 upstream. There are sleep in atomic bug that could cause kernel panic during firmware download process. The root cause is that nlmsg_new with GFP_KERNEL parameter is called in fw_dnld_timeout which is a timer handler. The call trace is shown below: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:265 Call Trace: kmem_cache_alloc_node __alloc_skb nfc_genl_fw_download_done call_timer_fn __run_timers.part.0 run_timer_softirq __do_softirq ... The nlmsg_new with GFP_KERNEL parameter may sleep during memory allocation process, and the timer handler is run as the result of a "software interrupt" that should not call any other function that could sleep. This patch changes allocation mode of netlink message from GFP_KERNEL to GFP_ATOMIC in order to prevent sleep in atomic bug. The GFP_ATOMIC flag makes memory allocation operation could be used in atomic context. Fixes: 9674da87 ("NFC: Add firmware upload netlink command") Fixes: 9ea7187c ("NFC: netlink: Rename CMD_FW_UPLOAD to CMD_FW_DOWNLOAD") Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220504055847.38026-1-duoming@zju.edu.cn Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Duoming Zhou authored
commit d270453a upstream. There are destructive operations such as nfcmrvl_fw_dnld_abort and gpio_free in nfcmrvl_nci_unregister_dev. The resources such as firmware, gpio and so on could be destructed while the upper layer functions such as nfcmrvl_fw_dnld_start and nfcmrvl_nci_recv_frame is executing, which leads to double-free, use-after-free and null-ptr-deref bugs. There are three situations that could lead to double-free bugs. The first situation is shown below: (Thread 1) | (Thread 2) nfcmrvl_fw_dnld_start | ... | nfcmrvl_nci_unregister_dev release_firmware() | nfcmrvl_fw_dnld_abort kfree(fw) //(1) | fw_dnld_over | release_firmware ... | kfree(fw) //(2) | ... The second situation is shown below: (Thread 1) | (Thread 2) nfcmrvl_fw_dnld_start | ... | mod_timer | (wait a time) | fw_dnld_timeout | nfcmrvl_nci_unregister_dev fw_dnld_over | nfcmrvl_fw_dnld_abort release_firmware | fw_dnld_over kfree(fw) //(1) | release_firmware ... | kfree(fw) //(2) The third situation is shown below: (Thread 1) | (Thread 2) nfcmrvl_nci_recv_frame | if(..->fw_download_in_progress)| nfcmrvl_fw_dnld_recv_frame | queue_work | | fw_dnld_rx_work | nfcmrvl_nci_unregister_dev fw_dnld_over | nfcmrvl_fw_dnld_abort release_firmware | fw_dnld_over kfree(fw) //(1) | release_firmware | kfree(fw) //(2) The firmware struct is deallocated in position (1) and deallocated in position (2) again. The crash trace triggered by POC is like below: BUG: KASAN: double-free or invalid-free in fw_dnld_over Call Trace: kfree fw_dnld_over nfcmrvl_nci_unregister_dev nci_uart_tty_close tty_ldisc_kill tty_ldisc_hangup __tty_hangup.part.0 tty_release ... What's more, there are also use-after-free and null-ptr-deref bugs in nfcmrvl_fw_dnld_start. If we deallocate firmware struct, gpio or set null to the members of priv->fw_dnld in nfcmrvl_nci_unregister_dev, then, we dereference firmware, gpio or the members of priv->fw_dnld in nfcmrvl_fw_dnld_start, the UAF or NPD bugs will happen. This patch reorders destructive operations after nci_unregister_device in order to synchronize between cleanup routine and firmware download routine. The nci_unregister_device is well synchronized. If the device is detaching, the firmware download routine will goto error. If firmware download routine is executing, nci_unregister_device will wait until firmware download routine is finished. Fixes: 3194c687 ("NFC: nfcmrvl: add firmware download support") Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Duoming Zhou authored
commit da5c0f11 upstream. The device_is_registered() in nfc core is used to check whether nfc device is registered in netlink related functions such as nfc_fw_download(), nfc_dev_up() and so on. Although device_is_registered() is protected by device_lock, there is still a race condition between device_del() and device_is_registered(). The root cause is that kobject_del() in device_del() is not protected by device_lock. (cleanup task) | (netlink task) | nfc_unregister_device | nfc_fw_download device_del | device_lock ... | if (!device_is_registered)//(1) kobject_del//(2) | ... ... | device_unlock The device_is_registered() returns the value of state_in_sysfs and the state_in_sysfs is set to zero in kobject_del(). If we pass check in position (1), then set zero in position (2). As a result, the check in position (1) is useless. This patch uses bool variable instead of device_is_registered() to judge whether the nfc device is registered, which is well synchronized. Fixes: 3e256b8f ("NFC: add nfc subsystem core") Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andreas Larsson authored
commit 2873d4d5 upstream. The previous split budget between TX and RX made it return not using the entire budget but at the same time not having calling called napi_complete. This sometimes led to the poll to not be called, and at the same time having TX and RX interrupts disabled resulting in the driver getting stuck. Fixes: 6cec9b07 ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Link: https://lore.kernel.org/all/20220429084656.29788-4-andreas@gaisler.com Cc: stable@vger.kernel.org Signed-off-by:
Andreas Larsson <andreas@gaisler.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andreas Larsson authored
commit 1e93ed26 upstream. The systemid property was checked for in the wrong place of the device tree and compared to the wrong value. Fixes: 6cec9b07 ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Link: https://lore.kernel.org/all/20220429084656.29788-3-andreas@gaisler.com Cc: stable@vger.kernel.org Signed-off-by:
Andreas Larsson <andreas@gaisler.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Hellstrom authored
commit 101da426 upstream. Use the device of the device tree node should be rather than the device of the struct net_device when allocating DMA buffers. The driver got away with it on sparc32 until commit 53b7670e ("sparc: factor the dma coherent mapping into helper") after which the driver oopses. Fixes: 6cec9b07 ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Link: https://lore.kernel.org/all/20220429084656.29788-2-andreas@gaisler.com Cc: stable@vger.kernel.org Signed-off-by:
Daniel Hellstrom <daniel@gaisler.com> Signed-off-by:
Andreas Larsson <andreas@gaisler.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Hartkopp authored
commit 72ed3ee9 upstream. As a carry over from the CAN_RAW socket (which allows to change the CAN interface while mantaining the filter setup) the re-binding of the CAN_ISOTP socket needs to take care about CAN ID address information and subscriptions. It turned out that this feature is so limited (e.g. the sockopts remain fix) that it finally has never been needed/used. In opposite to the stateless CAN_RAW socket the switching of the CAN ID subscriptions might additionally lead to an interrupted ongoing PDU reception. So better remove this unneeded complexity. Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/20220422082337.1676-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Duoming Zhou authored
commit 47f070a6 upstream. There are deadlocks caused by del_timer_sync(&priv->hang_timer) and del_timer_sync(&priv->rr_timer) in grcan_close(), one of the deadlocks are shown below: (Thread 1) | (Thread 2) | grcan_reset_timer() grcan_close() | mod_timer() spin_lock_irqsave() //(1) | (wait a time) ... | grcan_initiate_running_reset() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold priv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need priv->lock in position (2) of thread 2. As a result, grcan_close() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock. Link: https://lore.kernel.org/all/20220425042400.66517-1-duoming@zju.edu.cn Fixes: 6cec9b07 ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Cc: stable@vger.kernel.org Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Reviewed-by:
Andreas Larsson <andreas@gaisler.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Höppner authored
commit b9c10f68 upstream. Read requests that return with NRF error are partially completed in dasd_eckd_ese_read(). The function keeps track of the amount of processed bytes and the driver will eventually return this information back to the block layer for further processing via __dasd_cleanup_cqr() when the request is in the final stage of processing (from the driver's perspective). For this, blk_update_request() is used which requires the number of bytes to complete the request. As per documentation the nr_bytes parameter is described as follows: "number of bytes to complete for @req". This was mistakenly interpreted as "number of bytes _left_ for @req" leading to new requests with incorrect data length. The consequence are inconsistent and completely wrong read requests as data from random memory areas are read back. Fix this by correctly specifying the amount of bytes that should be used to complete the request. Fixes: 5e6bdd37 ("s390/dasd: fix data corruption for thin provisioned devices") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by:
Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by:
Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-5-sth@linux.ibm.com Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Höppner authored
commit cd68c48e upstream. When reading unformatted tracks on ESE devices, the corresponding memory areas are simply set to zero for each segment. This is done incorrectly for blocksizes < 4096. There are two problems. First, the increment of dst is done using the counter of the loop (off), which is increased by blksize every iteration. This leads to a much bigger increment for dst as actually intended. Second, the increment of dst is done before the memory area is set to 0, skipping a significant amount of bytes of memory. This leads to illegal overwriting of memory and ultimately to a kernel panic. This is not a problem with 4k blocksize because blk_queue_max_segment_size is set to PAGE_SIZE, always resulting in a single iteration for the inner segment loop (bv.bv_len == blksize). The incorrectly used 'off' value to increment dst is 0 and the correct memory area is used. In order to fix this for blksize < 4k, increment dst correctly using the blksize and only do it at the end of the loop. Fixes: 5e2b17e7 ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # v5.3+ Signed-off-by:
Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by:
Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-4-sth@linux.ibm.com Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Haberland authored
commit 71f38716 upstream. For ESE devices we get an error for write operations on an unformatted track. Afterwards the track will be formatted and the IO operation restarted. When using alias devices a track might be accessed by multiple requests simultaneously and there is a race window that a track gets formatted twice resulting in data loss. Prevent this by remembering the amount of formatted tracks when starting a request and comparing this number before actually formatting a track on the fly. If the number has changed there is a chance that the current track was finally formatted in between. As a result do not format the track and restart the current IO to check. The number of formatted tracks does not match the overall number of formatted tracks on the device and it might wrap around but this is no problem. It is only needed to recognize that a track has been formatted at all in between. Fixes: 5e2b17e7 ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by:
Stefan Haberland <sth@linux.ibm.com> Reviewed-by:
Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-3-sth@linux.ibm.com Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Haberland authored
commit 5b53a405 upstream. For ESE devices we get an error when accessing an unformatted track. The handling of this error will return zero data for read requests and format the track on demand before writing to it. To do this the code needs to distinguish between read and write requests. This is done with data from the blocklayer request. A pointer to the blocklayer request is stored in the CQR. If there is an error on the device an ERP request is built to do error recovery. While the ERP request is mostly a copy of the original CQR the pointer to the blocklayer request is not copied to not accidentally pass it back to the blocklayer without cleanup. This leads to the error that during ESE handling after an ERP request was built it is not possible to determine the IO direction. This leads to the formatting of a track for read requests which might in turn lead to data corruption. Fixes: 5e2b17e7 ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by:
Stefan Haberland <sth@linux.ibm.com> Reviewed-by:
Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-2-sth@linux.ibm.com Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Brown authored
commit fce49921 upstream. The AIU CODEC has a custom put() operation which returns 0 when the value of the mux changes, meaning that events are not generated for userspace. Change to return 1 in this case, the function returns early in the case where there is no change. Signed-off-by:
Mark Brown <broonie@kernel.org> Reviewed-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20220421123803.292063-3-broonie@kernel.org Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Brown authored
commit 12131008 upstream. The G12A tohdmi has a custom put() operation which returns 0 when the value of the mux changes, meaning that events are not generated for userspace. Change to return 1 in this case, the function returns early in the case where there is no change. Signed-off-by:
Mark Brown <broonie@kernel.org> Reviewed-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20220421123803.292063-4-broonie@kernel.org Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-