- Jan 06, 2024
-
-
Srinivasan Shanmugam authored
Fixes the below: drivers/gpu/drm/amd/amdgpu/atom.c:398 atom_skip_src_int() warn: ignoring unreachable code. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Marcelo Mendes Spessoto Junior authored
mod_freesync header file has duplicated copyright boilerplate. Drop the duplicate. Signed-off-by:
Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
It's no longer required. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2318 Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
This was included in gpu_info firmware, move it into the driver for consistency with other nv1x parts. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2318 Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Joshua Ashton authored
The check for sending the vsc infopacket to the display was gated behind PSR (Panel Self Refresh) being enabled. The vsc infopacket also contains the colorimetry (specifically the container color gamut) information for the stream on modern DP. PSR is typically only supported on mobile phone eDP displays, thus this was not getting sent for typical desktop monitors or TV screens. This functionality is needed for proper HDR10 functionality on DP as it wants BT2020 RGB/YCbCr for the container color space. Cc: stable@vger.kernel.org Cc: Harry Wentland <harry.wentland@amd.com> Cc: Xaver Hugl <xaver.hugl@gmail.com> Cc: Melissa Wen <mwen@igalia.com> Fixes: 15f9dfd5 ("drm/amd/display: Register Colorspace property for DP and HDMI") Tested-by:
Simon Berz <simon@berz.me> Tested-by:
Xaver Hugl <xaver.hugl@kde.org> Signed-off-by:
Joshua Ashton <joshua@froggi.es> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Hawking Zhang authored
Not needed any more with firmware fixes Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Asad Kamal authored
Expose sysfs entry mem_busy_percent for GC version 9.4.3 APU system Signed-off-by:
Asad Kamal <asad.kamal@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
- Jan 04, 2024
-
-
Srinivasan Shanmugam authored
dbg_flags looks to be defined with incorrect data type; to process multiple debug flag options, and hence defined dbg_flags as u32. Fixes the below: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_packet_manager_v9.c:117 pm_map_process_aldebaran() warn: maybe use && instead of & Fixes: 0de4ec9a ("drm/amdgpu: prepare map process for multi-process debug devices") Suggested-by:
Lijo Lazar <lijo.lazar@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Srinivasan Shanmugam authored
Return invalid error code -EINVAL for invalid block id. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1183 amdgpu_ras_query_error_status_helper() error: we previously assumed 'info' could be null (see line 1176) Suggested-by:
Hawking Zhang <Hawking.Zhang@amd.com> Cc: Tao Zhou <tao.zhou1@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Srinivasan Shanmugam authored
unsigned int "version_minor" is always >= 0 Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_rlc.c:534 amdgpu_gfx_rlc_init_microcode() warn: always true condition '(version_minor >= 0) => (0-u16max >= 0)' Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Srinivasan Shanmugam authored
Fixes the following gcc with W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn35/dcn35_hwseq.c:1124: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Charlene Liu <charlene.liu@amd.com> Cc: Muhammad Ahmed <ahmed.ahmed@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Srinath Rao <srinath.rao@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Srinivasan Shanmugam authored
drm/amd/display: Address function parameter 'context' not described in 'dc_state_rem_all_planes_for_stream' & 'populate_subvp_cmd_drr_info' Fixes the following gcc with W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_state.c:524: warning: Function parameter or member 'state' not described in 'dc_state_rem_all_planes_for_stream' drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_state.c:524: warning: Excess function parameter 'context' description in 'dc_state_rem_all_planes_for_stream' drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:540: warning: Function parameter or member 'context' not described in 'populate_subvp_cmd_drr_info' Suggested-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Dillon Varone <dillon.varone@amd.com> Cc: Jun Lei <jun.lei@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Srinath Rao <srinath.rao@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Srinivasan Shanmugam authored
kvmalloc_array + __GFP_ZERO is the same with kvcalloc. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c:873 amdgpu_cs_parser_bos() warn: Please consider using kvcalloc instead of kvmalloc_array Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Srinivasan Shanmugam authored
Fixes the below smatch warnings: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:2543 amdgpu_ras_recovery_init() warn: Please consider using kzalloc instead of kmalloc drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:2830 amdgpu_ras_init() warn: Please consider using kzalloc instead of kmalloc Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Srinivasan Shanmugam authored
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c:1106 amdgpu_connector_dvi_detect() warn: inconsistent indenting Fixes: 8a1de314 ("drm/amdgpu: Refactor 'amdgpu_connector_dvi_detect' in amdgpu_connectors.c") Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Asad Kamal authored
Use gpu_metrics_v1_5 for SMUv13.0.6 to fill gpu metric info Signed-off-by:
Asad Kamal <asad.kamal@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Le Ma <le.ma@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Asad Kamal authored
Add new gpu_metrics_v1_5 to acquire vcn/jpeg activity & pcie nak error counters Signed-off-by:
Asad Kamal <asad.kamal@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Le Ma <le.ma@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Asad Kamal authored
Update pmfw metric table to include vcn & jpeg activity for smu_v_13_0_6 Signed-off-by:
Asad Kamal <asad.kamal@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Le Ma <le.ma@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Asad Kamal authored
Use separate metric table for APU and Non APU systems for smu_v_13_0_6 to get metric data Signed-off-by:
Asad Kamal <asad.kamal@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Le Ma <le.ma@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Tom Chung authored
[WHY] Prepare for enabling the Panel Replay feature [HOW] - Add some Panel Replay setting functions in DC - Add the Panel Replay resource in dcn35_resource.c - Add debug masks for Panel Replay Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Reviewed-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Ivan Lipski authored
This reverts commit 44e60b14 . Since, it causes a regression in which eDP displays with PSR support, but no Replay support (Sink support <= 0x03), fail to enable PSR and consequently all IGT amd_psr tests fail. So, revert this until a more suitable fix can be found. This got brought back accidently with the backmerge. Acked-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
Ivan Lipski <ivlipski@amd.com> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
- Jan 03, 2024
-
-
Relja Vojvodic authored
For certain dual display configs that had one display using a 1080p mode, the DPM level used to drive the configs regressed from DPM 0 to DPM 3. This was caused by a missing check that should have only limited the pipe segments on non-phantom pipes. This caused issues with detile buffer allocation, which dissallow subvp from being used Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Dillon Varone <dillon.varone@amd.com> Reviewed-by:
Martin Leung <martin.leung@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Relja Vojvodic <relja.vojvodic@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Nicholas Kazlauskas authored
[Why] A hang was observed where a read-modify-write access occurred due to the register for idle state being shared between DMCUB and driver. dmcub read - idle allow / no commit driver read - idle allow / no commit driver write - idle disallow / no commit dmcub write - idle allow / commit Resulting in DMCUB re-entering IPS after a disable and keeping the allow high. [How] Long term we need to split commit/allow into two registers or use shared DRAM state, but short term we can reduce the repro rate by ensuring that the disallow went through by bounding the expected worst case scenario. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Hansen Dsouza <hansen.dsouza@amd.com> Reviewed-by:
Ovidiu Bunea <ovidiu.bunea@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Gabe Teeger authored
[Why] Failing mode validation during dc_commit, leading to blackscreen with an 8k DP2 display during mode change. [What] Fix mixmatch between pipe and stream, which prevented us from recognizing the link as DP2. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Gabe Teeger <gabe.teeger@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Revalla authored
[why] Move all init files to hwss folder. [how] moved the dcnxx_init.c and .h files into inside the hwss and cleared the linkage errors. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Martin Leung <martin.leung@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Revalla <hrevalla@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alvin Lee authored
For FPO and SubVP/DRR cases we need to ensure to program OTG_V_TOTAL_MIN/MAX_SEL, otherwise stretching the vblank in FPO / SubVP / DRR cases will not have any effect and we could hit underflow / corruption. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Alvin Lee <alvin.lee2@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Meenakshikumar Somasundaram authored
[Why] If bandwidth allocation feature is enabled, connection manager wont limit the dp tunnel bandwidth. So, need to do display mode validation for streams on dpia links to avoid oversubscription of dp tunnel bandwidth. [How] - To read non reduced link rate and lane count and update reported link capability. - To calculate the bandwidth required for streams of dpia links per host router and validate against the allocated bandwidth for the host router. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
PeiChen Huang <peichen.huang@amd.com> Reviewed-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Nicholas Kazlauskas authored
[Why] Race condition between notification of driver idle and the command being processed. We could theoretically enter idle between the submission and the wait for idle that occurs after. [How] Switch the notification to NO_WAIT to avoid the RPTR access. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Sung joon Kim <sungjoon.kim@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Jack Xiao authored
It's required to take the gfx mutex before access to CP_VMID_RESET, for there is a race condition with CP firmware to write the register. v2: add extra code to ensure the mutex releasing is successful. Signed-off-by:
Jack Xiao <Jack.Xiao@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Nicholas Kazlauskas authored
[Why] If we time out waiting for PMFW to finish the exit sequence and touch the DMCUB register the system will hang in a hard locked state. [How] Pol forever. This covers the case where things take too long but also enables for debugging to occur since the cores won't be hardlocked. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Sung joon Kim <sungjoon.kim@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Nicholas Kazlauskas authored
[Why] dc->idle_optimizations_allowed may be desynced with the hardware state. [How] Make sure we always exit out when dc_dmub_srv_exit_low_power_state is called by removing the check. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Sung joon Kim <sungjoon.kim@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Relja Vojvodic authored
[Why] Some debug tools, sometimes wrap around to multiple lines which causes issues with the DPM test script while it is looking for the logs. Need a way to tell when the log is finished. [How] Added "LOG_END" to the end of the log. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Alvin Lee <alvin.lee2@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Relja Vojvodic <relja.vojvodic@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alvin Lee authored
A new check was added to ensure FPO is not enabled when the FPO pipe has 0 planes. This requires the stream status to check the plane count, but the stream status was not assigned for FPO + Vactive cases which leads to FPO not be enabled always. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Relja Vojvodic <relja.vojvodic@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Alvin Lee <alvin.lee2@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Felix Kuehling authored
Change the rules for amdgpu_sync_resv to let KFD synchronize with VM fences on page table reservations. This fixes intermittent memory corruption after evictions when using amdgpu_vm_handle_moved to update page tables for VM mappings managed through render nodes. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Wayne Lin authored
link_rate sometime will be changed when DP MST connector hotplug, so pbn_div also need be updated; otherwise, it will mismatch with link_rate, causes no output in external monitor. Cc: stable@vger.kernel.org Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Jerry Zuo <jerry.zuo@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Wade Wang <wade.wang@hp.com> Signed-off-by:
Wayne Lin <wayne.lin@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Camille Cho authored
[Why] BL1_PWM_USER_LEVEL is meant for the user brightness level setting from OS. However, we update it along with other ABM levels to the real PWM value which could be ABMed. [How] Driver to cache and restore the user brightness level setting so that DMUB can retrieve the last user setting in ABM config initialization. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Anthony Koo <anthony.koo@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Camille Cho <camille.cho@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Meenakshikumar Somasundaram authored
[Why] Fix minor issues in BW Allocation Phase2. [How] - In set_usb4_req_bw_req(), link->dpia_bw_alloc_config.response_ready flag should be reset before writing DPCD REQUEST_BW. - Fix the granularity for value of 2 in get_bw_granularity(). - Removed bandwidth allocation support display fw boot option as the fw would read feature enable status from bios. - Clean up DPIA_EST_BW_CHANGED and DPIA_BW_REQ_SUCCESS cases in dpia_handle_bw_alloc_response(). - Removed allocate_usb4_bw and deallocate_usb4_bw. - Optimized loop in get_lowest_dpia_index(). - Updated link_dp_dpia_allocate_usb4_bandwidth_for_stream() and set_usb4_req_bw_req() to always issue request bw. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
PeiChen Huang <peichen.huang@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Josip Pavic authored
[Why] Some functions whose output is typically checked for null are not being checked for null at several call sites, causing some static analysis tools to throw an error. [How] Add null pointer guards around functions that typically have them at other call sites. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Sung Lee <sung.lee@amd.com> Reviewed-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Josip Pavic <josip.pavic@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Leo (Hanghong) Ma authored
[Why] Certain HDMI modes failed at dml cap check for uncompressed video but they can still be supported for compressed video. [How] Add HDMI capacity computations using fixed31_32 in dc side. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Chris Park <chris.park@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Relja Vojvodic authored
[Why] More information is desired for the test tools. [How] Refactored get_subvp_visual_confirm_color and get_mclk_switch_visual_confirm_color to support the new method of storing the p_state type, which was changed so that it could also be saved and output by the DPM log. Ensured that the p_state type is kept updated by looping through the pipes within commit_planes_for_stream. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Reviewed-by:
Alvin Lee <alvin.lee2@amd.com> Signed-off-by:
Relja Vojvodic <relja.vojvodic@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-