Merge tag 'zte-dt64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64

Pull "ZTE arm64 device tree changes for 4.9" from Shawn Guo:

 - Add initial DTS support for ZTE ZX296718 SoC and ZX296718 EVB board.

* tag 'zte-dt64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: Add ZTE ZX296718 SoC dts and Makefile

Pull "X-gene DTS changes queued for v4.9" from Duc Dang:

This change set includes:
+ DTS entry to enable SoC PMU for X-Gene v1 SoC
+ DTS entry to enable SoC PMU for X-Gene v2 SoC
+ PCIe legacy interrupt polarity fix for X-Gene
+ X-Gene SoC hwmon DTS entry
+ DTS entries for X-Gene v2 CPU clock

* tag 'xgene-dts-for-v4.9' of https://github.com/AppliedMicro/xgene-next:
  arm64: dts: apm: Add DT node for APM X-Gene 2 CPU clocks
  arm64: dts: apm: Add X-Gene SoC hwmon to device tree
  arm64: dts: apm: Fix interrupt polarity for X-Gene PCIe legacy interrupts
  arm64: dts: apm: Add APM X-Gene v2 SoC PMU DTS entries
  arm64: dts: apm: Add APM X-Gene SoC PMU DTS entries

Pull "mvebu dt64 for 4.9 (part 2)" from Gregory CLEMENT:

- enable MSI for PCIe on Armada 7K/8K

* tag 'mvebu-dt64-4.9-2' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: enable MSI for PCIe on Armada 7K/8K

Add device tree support for ZX296718 SoC and evaluation board based
on it.  Also document new values.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add DT nodes to enable APM X-Gene 2 CPU clocks.

[dhdang: changelog]
Signed-off-by: Hoan Tran <hotran@apm.com>
Signed-off-by: Duc Dang <dhdang@apm.com>

This patch adds DT node to enable hwmon driver for APM X-Gene SoC.

Signed-off-by: Hoan Tran <hotran@apm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>

On X-Gene v1 and X-Gene v2, PCIe legacy interrupt
should be configured as level-active high.

Signed-off-by: Duc Dang <dhdang@apm.com>

This patch adds APM X-Gene v2 SoC PMU DTS entries.

Signed-off-by: Duc Dang <dhdang@apm.com>
Cc: Tai Nguyen <ttnguyen@apm.com>

This patch adds APM X-Gene SoC PMU DTS entries.

Signed-off-by: Tai Nguyen <ttnguyen@apm.com>

* dt/irq-fix:
  arm64: dts: Fix broken architected timer interrupt trigger

This resolves a non-obvious conflict between a bugfix from
v4.8 and a cleanup for the exynos7 platform.

The ARM architected timer specification mandates that the interrupt
associated with each timer is level triggered (which corresponds to
the "counter >= comparator" condition).

A number of DTs are being remarkably creative, declaring the interrupt
to be edge triggered. A quick look at the TRM for the corresponding ARM
CPUs clearly shows that this is wrong, and I've corrected those.
For non-ARM designs (and in the absence of a publicly available TRM),
I've made them active low as well, which can't be completely wrong
as the GIC cannot disinguish between level low and level high.

The respective maintainers are of course welcome to prove me wrong.

While I was at it, I took the liberty to fix a couple of related issue,
such as some spurious affinity bits on ThunderX, and their complete
absence on ls1043a (both of which seem to be related to copy-pasting
from other DTs).

Acked-by: Duc Dang <dhdang@apm.com>
Acked-by: Carlo Caione <carlo@endlessm.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull "arm64: Xilinx ZynqMP dt patches for v4.9" from Michal Simek:

- Fix gic ranges property
- Use 64bit size cells format
- Add PCIe node
- Correct pmu and watchdog nodes

* tag 'zynqmp-dt-for-4.9' of https://github.com/Xilinx/linux-xlnx:
  ARM64: zynqmp: Correct the watchdog timer interrupt number
  ARM64: zynqmp: Add missing interrupt-parent to PMU node
  ARM64: zynqmp: Add PCIe node
  ARM64: zynqmp: Use 64bit size cell format
  ARM64: zynqmp: Align gic ranges for 64k in device tree

Pull "ARM: mediatek: dts64 updates for v4.9" from Matthias Brugger:

- add HDMI related nodes to mt8173
- enable the HDMI output on mt8173-evb

* tag 'v4.8-next-dts64' of https://github.com/mbgg/linux-mediatek:
  arm64: dts: mt8173-evb: enable HDMI output
  arm64: dts: mt8173: Add HDMI related nodes

Merge tag 'imx-dt64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64

Pull "i.MX arm64 device tree changes for 4.9" from Shawn Guo:
 - Add property dma-coherent for ls2080a PCI device to save software
   cache maintenance.
 - Update serial aliases and use stdout-path to sepecify console for
   ls2080a and ls1043a boards.
 - Add DDR memory controller device node for ls2080a and ls1043a SoCs.

* tag 'imx-dt64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: ls2080a: Add 'dma-coherent' for ls2080a PCI nodes
  arm64: dts: add stdout-path to chosen node for ls2080a/ls1043a boards
  arm64: dts: updates serial aliases for ls1043a rdb and qds boards
  arm64: dts: Add DDR memory controller for Layerscape SoCs

Merge tag 'tegra-for-4.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64

Pull "arm64: tegra: Device tree changes for v4.9-rc1" from Thierry Reding:

Add a couple of devices (AGIC, ADMA) on Tegra210 and enable them on
Smaug. Also enable DPAUX on Smaug to allow the I2C bus that shares pads
with the DPAUX to be used to access various audio devices. Furthermore,
enable the XUSB controller on Smaug for USB 3.0 support.

Finally, select PM_GENERIC_DOMAINS for 64-bit Tegra devices to make sure
devices are probed only after their power partitions have been enabled.

* tag 'tegra-for-4.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Select PM_GENERIC_DOMAINS
  arm64: tegra: Enable XUSB controller on Tegra210 Smaug
  arm64: tegra: Add the various audio devices for Tegra210 Smaug
  arm64: tegra: Enable DPAUX for Tegra210 Smaug
  arm64: tegra: Add ACONNECT, ADMA and AGIC nodes Tegra210 Smaug
  arm64: tegra: Add SOR power-domain for Tegra210
  arm64: tegra: Add ADMA node for Tegra210
  arm64: tegra: Add AGIC node for Tegra210
  arm64: tegra: Drop clock and reset names for XUSB powergates
  arm64: tegra: Simplify Tegra210 GPIO compatible value

Merge tag 'v4.9-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64

Pull "Rockchip dts64 changes for 4.9" from Heiko Stübner:

64bit Rockchip devicetree changes containing support for the recently
added firmware reboot-flag support, one new board the Tronsmart Orion
based on the rk3368 and a large number of newly supported peripherals
for the rk3399 (type-c phy, usb2 phy, pcie controller and pcie phy,
gmac, arm-pmu using ppi partitioning, efuse, saradc) as well as some
smaller housekeeping and non-critical fixes.

* tag 'v4.9-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (22 commits)
  arm64: dts: rockchip: add Type-C phy for RK3399
  arm64: dts: rockchip: enable the gmac for rk3399 evb board
  arm64: dts: rockchip: add the gmac needed node for rk3399
  arm64: dts: rockchip: support the pmu node for rk3399
  arm64: dts: rockchip: change all interrupts cells to 4 on rk3399 SoCs
  arm64: dts: rockchip: add the tcpc for rk3399 power domain
  arm64: dts: rockchip: add efuse0 device node for rk3399
  arm64: dts: rockchip: configure PCIe support for rk3399-evb
  arm64: dts: rockchip: add the PCIe controller support for RK3399
  arm64: dts: rockchip: add the PCIe PHY for RK3399
  arm64: dts: rockchip: add the gmac power domain on rk3399
  arm64: dts: rockchip: Add pinctrl entry for 32k clock on rk3399
  arm64: dts: rockchip: set to CCI clock of RK3399 to 600M
  arm64: dts: rockchip: fix the address map for WDT0 and WDT1
  arm64: dts: rockchip: add the saradc for rk3399
  arm64: dts: rockchip: configure usb2-phy support for rk3399-evb
  arm64: dts: rockchip: add usb2-phy support for rk3399
  arm64: dts: rockchip: add syscon-reboot-mode DT node
  soc: rockchip: add reboot-mode header
  arm64: dts: rockchip: remove broken-cd from sdio0
  ...

Pull "Broadcom devicetree-arm64 changes for 4.9" from Florian Fainelli:

This pull request contains Broadcom ARM64-based SoC Device Tree changes for
v4.9, please pull the folllowing:

- Dhanajay adds the PWM Device Tree nodes to the Northstar 2 DTS files

* tag 'arm-soc/for-4.9/devicetree-arm64' of http://github.com/Broadcom/stblinux:
  arm64: dts: Add PWM DT node for NS2

Pull "mvebu dt64 for 4.9 (part 1)" from Gregory CLEMENT:

- add description for the new Armada 8040 dev board
- add the PIC and PMU on Armada 7K/8K

* tag 'mvebu-dt64-4.9-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: describe the PIC and PMU on Armada 7K/8K
  arm64: dts: marvell: add description for the Armada 8040 dev board
  arm64: dts: marvell: add description for the slave CP110 in Armada 8K

Merge tag 'qcom-arm64-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64

Pull "Qualcomm ARM64 Updates for v4.9" from Andy Gross:

* Updates for MSM8916 including TSCR, SMSM/SMP2P, and MBA reserve
* Update SCM node to denote being a reset-controller
* Fix broken interrupt settings
* Add TSENS nodes for MSM8916/MSM8996
* Add DB820c support
* Add MSM8916/APQ8016 display support

* tag 'qcom-arm64-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: dts: apq8016-sbc: Add HDMI display support
  arm64: dts: msm8916: Add display support
  arm64: dts: db820c: add support to external sd card.
  arm64: dts: db820c: add support to SPI on HS
  arm64: dts: db820c: add support to LS-SPI0
  arm64: dts: db820c: add support to I2C on HS
  arm64: dts: db820c: add support to LS-I2C1
  arm64: dts: db820c: add support to LS-I2C0
  arm64: dts: db820c: add support to LS-UART0
  arm64: dts: db820c: add basic board support
  arm64: dts: msm8996: Add thermal zones, tsens and qfprom nodes
  arm64: dts: msm8916: Add thermal zones, tsens and qfprom nodes
  arm64: dts: qcom: Fix broken interrupt trigger settings
  arm64: dts: qcom: msm8916: Add tcsr syscon
  arm64: dts: qcom: msm8916: Make scm a reset-controller
  arm64: dts: qcom: msm8916: Add mba memory reserve
  arm64: dts: qcom: msm8916: Add smsm and smp2p nodes

Pull "ARM64: DT: Hisilicon SoC DT updates for 4.9" from Wei Xu:

- Set UART1 clock frequency to 150MHz for higher baud rates on hikey
- Add display subsystem, HDMI and cma nodes on hikey to support display
- Add syscon-reboot-mode support on hikey
- Add pstore support on hikey
- Add resets and sd-uhs-sdr property dwmmc ndoe on hikey
- Remove hip05_hns.dtsi since it can not be built without mbigenv1
- Update system controller bingding document for hip05 and hip06
- Add xge and sas support on hip06

* tag 'hisi-soc-dt-for-4.9' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hi6220: add sd-uhs- properties into dwmmc_1
  arm64: dts: hi6220: add resets property into dwmmc nodes
  arm64: dts: hikey: extend default cma size to 128MB
  arm64: dts: hip06: Append sas node
  arm64: dts: hip06: Append hns node
  dt-bindings: hisilicon: Add Hip05 and Hip06 system controller support
  arm64: dts: hip05: kill hip05_hns.dtsi
  arm64: dts: hikey: Add pstore support for HiKey
  arm64: dts: hikey: Add hikey support for syscon-reboot-mode
  arm64: dts: Add HDMI node for hi6220-hikey
  arm64: dts: Add display subsystem DT nodes for hi6220-hikey
  arm64: dts: set UART1 clock frequency to 150MHz

Merge tag 'samsung-dt64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64

Pull "Samsung DeviceTree ARM64 update for v4.9" from Krzysztof Kozlowski:
1. Use human-friendly symbols for interrupt flags.

* tag 'samsung-dt64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Use human-friendly symbols for timer interrupt flags

Merge tag 'uniphier-dt64-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64

Merge "UniPhier ARM64 SoC DT updates for v4.9" from Masahiro Yamada:

* Match DT names other projects and documents
* Use clock/reset drivers
* Add new SoC/board support
* Misc

* tag 'uniphier-dt64-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: add LD11 SoC/Board support
  arm64: dts: uniphier: add specific compatible to SoC-Glue node
  arm64: dts: uniphier: use clock/reset controllers
  arm64: dts: uniphier: add pinctrl property to System Bus node
  arm64: dts: uniphier: match DT names to other projects and documents

This commit adds a reference to the appropriate MSI controller in the
description of the PCIe controllers on Marvel Armada 7K and 8K
platforms.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

The 'dma-coherent' indicates that the hardware IP block can ensure
the coherency of the data transferred from/to the IP block. This
can avoid the software cache flush/invalid actions, and improve
the performance significantly.

The PCI IP block of ls2080a has this capability, so adding this
feature to improve the PCI performance.

Signed-off-by: Liu Gang <Gang.Liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

There are 2 Type-C phy on RK3399, they are almost same, except the
address of register. They support USB3.0 Type-C and DisplayPort1.3
Alt Mode on USB Type-C. Register a phy, supply it to USB3 controller
and DP controller.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

We add the required and optional properties for evb board.
See the [0] to get the detail information.

[0]:
Documentation/devicetree/bindings/net/rockchip-dwmac.txt

Signed-off-by: Roger Chen <roger.chen@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The RK3399 GMAC Ethernet Controller provides a complete Ethernet interface
from processor to a Reduced Media Independent Interface (RMII) and Reduced
Gigabit Media Independent Interface (RGMII) compliant Ethernet PHY.

This patch adds the related needed device information.
e.g.: interrupts, grf, clocks, pinctrl and so on.

The full details are in [0].

[0]:
Documentation/devicetree/bindings/net/rockchip-dwmac.txt

Signed-off-by: Roger Chen <roger.chen@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This patch adds to enable the ARM Performance Monitor Units for rk3399.
ARM cores often have a PMU for counting cpu and cache events like cache
misses and hits.

This uses the new interrupt-partition mechanism to allow the two pmu
instances to use the per-cpu interrupt.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Add the interrupts cells value for 4, and the 4th cell is zero.

Due to the doc[0] said:" the system requires describing PPI affinity,
then the value must be at least 4"
The 4th cell is a phandle to a node describing a set of CPUs this
interrupt is affine to. The interrupt must be a PPI, and the node
pointed must be a subnode of the "ppi-partitions" subnode. For
interrupt types other than PPI or PPIs that are not partitionned,
this cell must be zero. See the "ppi-partitions" node description
below.

[0]:
Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The tcpc is the Type C Port Controller and Type C Port Delivery (tcpd)
is part of it, we haven't used them now, add it to save power consumption.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Add a efuse0 node in the device tree for the ARM64 rk3399 SoC.

Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Let's assigne slot numbers, ep-gpios and clkreq used by PCIe
on evb board as well the PHY node here. Note that we still
disable them as the auto training of PCIe link will make the
kernel use more time to boot if there are no any devices there.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This patch introduces PCIe support found on RK3399 platform,
and specify phys phandle for it.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This patch adds PCIe node for RK3399 to support
PCIe controller.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This patch adds the gmac ppower-domain to save power consumption
by letting the driver core handle the power-domain so we can
save power on boards not needing Ethernet.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

On some rk3399 boards GPIO0_A0 is hooked up to a 32 kHz clock.  This can
be used as the source for various clocks in the system.

Add a pinmux so boards can get this pin properly configured.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

With these properties added, sd cards inserted into hikey can work at UHS
mode if they have such capability.

Note, this depends on HiKey UHS-SD support patch [1] to work properly.
If you didn't add this patch, but added sd-uhs- properties into dwmmc_1,
then sd cards cannot work. As of this post, patch [1] has been integrated
into maintainer's next branch [2].

[1]: [V4] mmc: dw_mmc-k3: UHS-SD card for Hisilicon Hikey,
 https://patchwork.kernel.org/patch/9262515/
[2]: https://git.linaro.org/people/ulf.hansson/mmc.git

 next
 commit a8a5b2909cfc ("mmc: dw_mmc: k3: UHS-SD card for Hisilicon Hikey")

cc: Ulf Hansson <ulf.hansson@linaro.org>
cc: Jaehoon Chung <jh80.chung@samsung.com>
cc: Jinguojun <kid.jin@hisilicon.com>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

This is a low-cost 64bit SoC from Socionext.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This is a simple MFD, but add a specific compatible just in case.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The UniPhier reset controller driver has been merged.  Enable it.
Also, replace the fixed-rate clocks with the dedicated clock
drivers.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>