With system suspend using pm_runtime_force_suspend() we can't rely on
the pm_runtime_get_if_in_use() trick to deal with devfreq callbacks
after (or racing with) suspend.  So flush any pending idle or boost
work in the suspend path.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220108180913.814448-3-robdclark@gmail.com


Signed-off-by: Rob Clark <robdclark@chromium.org>

System suspend uses pm_runtime_force_suspend(), which cheekily bypasses
the runpm reference counts.  This doesn't actually work so well when the
GPU is active.  So add a reasonable delay waiting for the GPU to become
idle.

Alternatively we could just return -EBUSY in this case, but that has the
disadvantage of causing system suspend to fail.

v2: s/ret/remaining [sboyd], and switch to using active_submits count
    to ensure we aren't racing with submit cleanup (and devfreq idle
    work getting scheduled, etc)
v3: fix inverted logic

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220108180913.814448-2-robdclark@gmail.com


Signed-off-by: Rob Clark <robdclark@chromium.org>

The function performs a check on the "phy" input parameter, however, it
is used before the check.

Initialize the "dev" variable after the sanity check to avoid a possible
NULL pointer dereference.

Fixes: 5c829028 ("drm/msm/dsi: Split PHY drivers to separate files")
Addresses-Coverity-ID: 1493860 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220116181844.7400-1-jose.exposito89@gmail.com


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Reported-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Fixes: 3ab1c5cc ("drm/msm: Add param for userspace to query suspend count")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220113163215.215367-1-robdclark@gmail.com


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

For example, memory-region in .dts as below,
	reg = <0x0 0x50000000 0x0 0x20000000>

We can get below values,
struct resource r;
r.start = 0x50000000;
r.end	= 0x6fffffff;

So the size should be:
size = r.end - r.start + 1 = 0x20000000

Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Fixes: 072f1f91 ("drm/msm: add support for "stolen" mem")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220112123334.749776-1-xianting.tian@linux.alibaba.com


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

The function performs a check on the "ctx" input parameter, however, it
is used before the check.

Initialize the "base" variable after the sanity check to avoid a
possible NULL pointer dereference.

Fixes: 4259ff7a ("drm/msm/dpu: add support for pcc color block in dpu driver")
Addresses-Coverity-ID: 1493866 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20220109192431.135949-1-jose.exposito89@gmail.com


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.

Fixes: e00012b2 ("drm/msm/hdmi: Make HDMI core get its PHY")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220107085026.23831-1-linmq006@gmail.com


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

If of_find_device_by_node() succeeds, dsi_get_phy() doesn't
a corresponding put_device(). Thus add put_device() to fix the exception
handling.

Fixes: ec31abf6 ("drm/msm/dsi: Separate PHY to another platform device")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211230070943.18116-1-linmq006@gmail.com


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

The code that uses variable mdss has been removed, So the declaration
and assignment of the variable can be removed.

Eliminate the following clang warning:
drivers/gpu/drm/msm/msm_drv.c:513:19: warning: variable 'mdss' set but
not used [-Wunused-but-set-variable]

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 2027e5b3 ("drm/msm: Initialize MDSS irq domain at probe time")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211216031103.34146-1-yang.lee@linux.alibaba.com


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

A CP_PROTECT entry for SMMU registers is missing for A540. According to
downstream sources its length is same as on A530 - 0x20000 bytes.

On all other revisions SMMU region length is 0x10000 bytes. Despite
this, we setup region of length 0x20000 on all revisions. This doesn't
cause any issues on those GPUs. As for preventing accesses to the region
from protected mode it was tested to work the same.

This patch drops the "if" condition in setup of CP_PROTECT entry because
it already includes all supported revisions except A540.

Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Link: https://lore.kernel.org/r/20211212160333.980343-2-vladimir.lypak@gmail.com


Signed-off-by: Rob Clark <robdclark@chromium.org>

This GPU is found on SoCs such as MSM8953 (650 MHz), SDM450 (600 MHz),
SDM632 (725 MHz).

Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Link: https://lore.kernel.org/r/20211212160333.980343-1-vladimir.lypak@gmail.com


Signed-off-by: Rob Clark <robdclark@chromium.org>

Add the missing layer mixer register dump information to
dpu snapshot to assist debugging.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/1639621658-1500-1-git-send-email-quic_abhinavk@quicinc.com


Signed-off-by: Rob Clark <robdclark@chromium.org>

We are preparing to change DPU plane implementation. Move SSPP debugfs
code from dpu_plane.c to dpu_hw_sspp.c, where it belongs.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201222633.2476780-9-dmitry.baryshkov@linaro.org


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Remove unneeded variable used to store return value.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211215085554.444351-1-deng.changcheng@zte.com.cn


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

No functional change, as we only actually enable autosuspend for the GPU
device.  But lets not encourage thinking that autosuspend is a good idea
for anything display related.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211215175910.1744151-1-robdclark@gmail.com


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211215174524.1742389-4-robdclark@gmail.com


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

We'll re-use this for debugfs.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211215174524.1742389-3-robdclark@gmail.com


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Add UTS_RELEASE and show timestamp the same way for consistency.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211215174524.1742389-2-robdclark@gmail.com


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Implement plane's atomic_print_state() callback, printing DPU-specific
plane state: blending stage, SSPP and multirect mode and index.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211215160912.2715956-2-dmitry.baryshkov@linaro.org


[DB: marked pdpu and pstate as const]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Implement CRTC's atomic_print_state() callback, printing DPU-specific
CRTC state (LM, CTL and DSPP ids).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211215160912.2715956-1-dmitry.baryshkov@linaro.org


[DB: marked cstate as const]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

The "dp_bridge" pointer is allocated with devm_kzalloc() so it will be
freed automatically.  Kfreeing it here will only lead to a double free.

Fixes: 8a3b4c17 ("drm/msm/dp: employ bridge mechanism for display enable and disable")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211215114900.GD14552@kili


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Squash dpu_debugfs_setup_regset32() into dpu_debugfs_create_regset32().
it makes little sense to have separate function to just setup the
structure.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201222633.2476780-8-dmitry.baryshkov@linaro.org


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

DRM code handles removing all debugfs recursively. Drop CRTC-specific
code to perform that.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201222633.2476780-7-dmitry.baryshkov@linaro.org


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

DRM code handles removing all debugfs recursively. Drop plane-specific
code to perform that.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201222633.2476780-6-dmitry.baryshkov@linaro.org


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Proper support for the 'default_scaling' debugfs file was removed during
DPU driver pre-merge cleanup. Remove leftover file.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201222633.2476780-5-dmitry.baryshkov@linaro.org


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Change \t to \n in the print format to stop putting all SSPP status in a
single line. Splitting it to one SSPP per line is much more readable.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201222633.2476780-4-dmitry.baryshkov@linaro.org


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Make safe_status debugfs fs file actually return safe status rather than
danger status data.

Fixes: 25fdd593 ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201222633.2476780-3-dmitry.baryshkov@linaro.org


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

The disable_danger debugfs file is not related to a single plane.
Instead it is used by all registered planes. Move it from plane subtree
to the global subtree next to danger_status and safe_status files,
so that the new file supplements them.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201222633.2476780-2-dmitry.baryshkov@linaro.org


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

I am seeing some crash logs which imply that we are trying to use
crashdumper hw to read back GPU state when the GPU isn't initialized.
This doesn't go well (for example, GPU could be in 32b address mode
and ignoring the upper bits of buffer that it is trying to dump state
to).

I'm not *quite* sure how we get into this state in the first place,
but lets not make a bad situation worse by triggering iova fault
crashes.

While we're at it, also add the information about whether the GPU is
initialized to the devcore dump to make this easier to see in the
logs (which makes the WARN_ON() redundant and even harmful because
it fills up the small bit of dmesg we get with the crash report).

Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20211209193118.1163248-1-robdclark@gmail.com


Signed-off-by: Rob Clark <robdclark@chromium.org>

Add checking aux read/write status at both dp_link_parse_sink_count()
and dp_link_parse_sink_status_filed() to avoid long timeout delay if
dp aux read/write failed at timeout due to cable unplugged.

Changes in V4:
-- split this patch as stand alone patch

Changes in v5:
-- rebase on msm-next branch

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1638985262-2072-1-git-send-email-quic_khsieh@quicinc.com


Signed-off-by: Rob Clark <robdclark@chromium.org>

New required programming in CTL for SC7280. Group ID informs
HW of which VM owns that CTL. Force this group ID to
default/disabled until virtualization support is enabled in SW.

Changes in v1:
 - Fix documentation and add descritpion for the change (Stephen)

Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1635510619-6715-1-git-send-email-quic_kalyant@quicinc.com


Signed-off-by: Rob Clark <robdclark@chromium.org>

Commit 739b4e77 ("drm/msm/dsi: Fix an error code in
msm_dsi_modeset_init()") changed msm_dsi_modeset_init() to return an
error code in case msm_dsi_manager_validate_current_config() returns
false. However this is not an error case, but a slave DSI of the bonded
DSI link. In this case msm_dsi_modeset_init() should return 0, but just
skip connector and bridge initialization.

To reduce possible confusion, drop the
msm_dsi_manager_validate_current_config() function, and specif 'bonded
&& !master' condition directly in the msm_dsi_modeset_init().

Fixes: 739b4e77 ("drm/msm/dsi: Fix an error code in msm_dsi_modeset_init()")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211125180114.561278-1-dmitry.baryshkov@linaro.org


Signed-off-by: Rob Clark <robdclark@chromium.org>

Client driven prefetch (CDP) is properly setup only for SSPP REC0
currently. Enable client driven prefetch also for SSPP REC1.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201225140.2481577-5-dmitry.baryshkov@linaro.org


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Add DPU_SSPP_CSC_ANY denoting any CSC block. As we are at it, rewrite
DPU_SSPP_SCALER (any scaler) to use BIT(x) instead of hand-coded
bitshifts.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201225140.2481577-4-dmitry.baryshkov@linaro.org


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

The _dpu_hw_sspp_setup_scaler3 (hw_sspp->setup_scaler) does not use pe
argument. Let's remove it while we are cleaning scaled configuration.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201225140.2481577-3-dmitry.baryshkov@linaro.org


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Scaler and pixel_ext configuration does not contain a long living state,
it is used only during plane update, so remove these two fields from
dpu_plane_state and allocate them on stack.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201225140.2481577-2-dmitry.baryshkov@linaro.org


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Currently the msm_dp_*** functions implement the same sequence which would
happen when drm_bridge is used. hence get rid of this intermediate layer
and align with the drm_bridge usage to avoid customized implementation.

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>

Changes in v2:
-- revise commit text
-- rename dp_bridge to msm_dp_bridge
-- delete empty functions

Changes in v3:
-- replace kzalloc() with devm_kzalloc()
-- replace __dp_display_enable() with dp_display_enable()
-- replace __dp_display_disable() with dp_display_disable()

Changes in v4:
-- msm_dp_bridge_init() called from msm_dp_modeset_init() same as dsi

Changes in v5:
-- delete attach, mode_fixup and pre_enable from dp_bridge_ops

Changes in v6:
-- rebase on msm-next-plus-fixes branch

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/1638918933-2544-1-git-send-email-quic_khsieh@quicinc.com


Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge old hdmi_bridge and hdmi_connector implementations. Use
drm_bridge_connector instead.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211015001100.4193241-2-dmitry.baryshkov@linaro.org


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Fixed coverity warning by removing the dead code

Addresses-Coverity: 1494147 ("Logically dead code")

Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211203193253.108813-1-amhamza.mgc@gmail.com


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Let's select RATIONAL with dp driver. avoid like:

[...]
x86_64-linux-gnu-ld: drivers/gpu/drm/msm/dp/dp_catalog.o: in function `dp_catalog_ctrl_config_msa':
dp_catalog.c:(.text+0x57e): undefined reference to `rational_best_approximation'

Fixes: c943b494 ("drm/msm/dp: add displayPort driver support")
Reported-by: kernelbot <kernel-bot@kylinos.cn>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Link: https://lore.kernel.org/r/20211110070950.3355597-2-liu.yun@linux.dev


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>