Instead of checking for a NULL regbase, use the return value from
pmc_core_ssram_init() to check if PMC discovery was successful. If not, use
the legacy enumeration method (which only works for the primary PMC).

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-15-david.e.box@linux.intel.com


Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Clean up the code handling SSRAM discovery. Handle all resource allocation
and cleanup in pmc_core_ssram_get_pmc(). Return the error status from this
function but only fail the init if we fail to discover the primary PMC.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-14-david.e.box@linux.intel.com


Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Currently, if the PMC SSRAM initialization fails, no error is returned and
the only indication is that a PMC device has not been created.  Instead,
allow an error to be returned and handled directly by the caller.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-13-david.e.box@linux.intel.com


Signed-off-by: Hans de Goede <hdegoede@redhat.com>

In order to setup a table of low power mode requirements for Meteor Lake,
pmc_core_get_low_power_modes() will need to be run from platform init code
so that the enabled modes are known, allowing the use of the
pmc_for_each_mode helper. Make the function global and call it from the
platform init code.

Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-12-david.e.box@linux.intel.com


Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Export symbols to allow access to Intel PMT Telemetry data on available
devices. Provides APIs to search, register, and read telemetry using a
kref managed pointer that serves as a handle to a telemetry endpoint.
To simplify searching for present devices, have the IDA start at 1
instead of 0 so that 0 can be used to indicate end of search.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-11-david.e.box@linux.intel.com


Signed-off-by: Hans de Goede <hdegoede@redhat.com>

The PMT header is passed to several functions. Instead, store the header in
struct intel_pmt_entry which is also passed to these functions and shorten
the argument list. This simplifies the calls in preparation for later
changes. While here also perform a newline cleanup.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-10-david.e.box@linux.intel.com


Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Some devices may emulate PCI VSEC capabilities in MMIO. In such cases the
BAR is not readable from a config space. Provide a field for drivers to
indicate the base address to be used.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-9-david.e.box@linux.intel.com


Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Add and export intel_vsec_register() to allow the registration of Intel
extended capabilities from other drivers. Add check to look for memory
conflicts before registering a new capability. Since the vsec provider
may not be a PCI device, add a parent field to
intel_vsec_platform_info() to allow specifying the parent device for
device managed cleanup.

Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-8-david.e.box@linux.intel.com


Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Instead of checking for a NULL parent argument in intel_vsec_add_aux() and
then assigning it to the probed device, remove this check and just pass the
device in the call. Since this function is exported, return -EINVAL if the
parent is not specified.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-7-david.e.box@linux.intel.com


Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Use cleanup.h helpers to handle cleanup of resources in
intel_vsec_add_dev() after failures.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-6-david.e.box@linux.intel.com


Signed-off-by: Hans de Goede <hdegoede@redhat.com>

In preparation for exporting an API to register Intel Vendor Specific
Extended Capabilities (VSEC) from other drivers, remove the pointer to
platform_info from intel_vsec_device. This prevents a potential page fault
when auxiliary drivers probe and attempt to dereference this pointer to
access the needed quirks field. Instead, just add the quirks to
intel_vsec_device.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-5-david.e.box@linux.intel.com


Signed-off-by: Hans de Goede <hdegoede@redhat.com>

In preparation for exporting an API to register Intel Vendor Specific
Extended Capabilities (VSEC) from other drivers, move needed structures to
the header file.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-4-david.e.box@linux.intel.com


Signed-off-by: Hans de Goede <hdegoede@redhat.com>

In intel_vsec_add_aux(), just return from the last call to
devm_add_action_or_reset() instead of checking its return value.

Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-3-david.e.box@linux.intel.com


Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Commit 936874b7 ("platform/x86/intel/vsec: Add PCI error recovery
support to Intel PMT") added an xarray to track the list of vsec devices to
be recovered after a PCI error. But it did not provide cleanup for the list
leading to a memory leak that was caught by kmemleak.  Do xa_alloc() before
devm_add_action_or_reset() so that the list may be cleaned up with
xa_erase() in the release function.

Fixes: 936874b7

 ("platform/x86/intel/vsec: Add PCI error recovery support to Intel PMT")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-2-david.e.box@linux.intel.com


[hdegoede@redhat.com: Add missing xa_erase() on error-exit
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Add Silicom platform (silicom-platform) Linux driver for Swisscom
Business Box (Swisscom BB) as well as Cordoba family products.

This platform driver provides support for various functions via
the Linux LED framework, GPIO framework, Hardware Monitoring (HWMON)
and device attributes.

Signed-off-by: Henry Shi <henryshi2018@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231124200334.5318-1-henryshi2018@gmail.com


Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Adhere to Linux kernel coding style.

Reported by checkpatch:

WARNING: braces {} are not necessary for single statement blocks

Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://lore.kernel.org/r/20231016191349.3856-1-edson.drosdeck@gmail.com


Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Support CPU and GPU fan speed monitoring through WMI for Predator
PHN16-71.

Signed-off-by: SungHwan Jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20231124094122.100707-3-onenowy@gmail.com


Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

"select ACPI_VIDEO" cause recursive dependency when "depends on HWMON"
is added:

drivers/hwmon/Kconfig:6:error: recursive dependency detected!
drivers/hwmon/Kconfig:6: symbol HWMON is selected by EEEPC_LAPTOP
drivers/platform/x86/Kconfig:326: symbol EEEPC_LAPTOP depends on ACPI_VIDEO
drivers/acpi/Kconfig:208: symbol ACPI_VIDEO is selected by ACER_WMI
drivers/platform/x86/Kconfig:173: symbol ACER_WMI depends on HWMON

Replace the select with depends on to avoid this problem when the next
patch in this series adds "depends on HWMON".

There is a stub defined for the used acpi_video_get_backlight_type()
function when ACPI_VIDEO is not set, so use:

        depends on ACPI_VIDEO || ACPI_VIDEO = n

Signed-off-by: SungHwan Jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20231124094122.100707-4-onenowy@gmail.com


Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

The Acer Predator PHN16-71 has the mode key that is used to rotate thermal
modes or toggle turbo mode with predator sense app (ver. 4) on windows.

This patch includes platform profile and the mode key support for the
device and also includes a small fix for "WMI_gaming_execute_u64"
function.

Signed-off-by: SungHwan Jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20231124094122.100707-2-onenowy@gmail.com


Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Use kasprintf() instead of hand writing it.
This saves the need of an intermediate buffer.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f2b2c9e5d80550e480a627c1b2139d5cc9472ffa.1699775015.git.christophe.jaillet@wanadoo.fr


Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Fix the maximum brightness being much too low on the Yoga Tab 3 Pro.

The LP8557 backlight controller can either be configured to multiply its
PWM input and the I2C register set level (requiring both to be at 100%
for 100% output); or to only take the I2C register set level into account.

Multiplying the 2 levels is useful because this will turn off the backlight
when the panel goes off and turns off its PWM output.

But on the YT3-X90F the panel's PWM output defaults to a duty-cycle of much
less then 100%, severely limiting max brightness. In this case the LP8557
should be configured to only take the I2C register into account and
the i915 driver must turn off the backlight separately using a VBT MIPI
sequence to turn off the backlight.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231104205828.63139-4-hdegoede@redhat.com

The SPI attached WM5102 codec on the Lenovo Yoga Tab 3 Pro YT3-X90F
is not described in the ACPI tables.

Add info to instantiate the SPI device for the codec manually.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231104205828.63139-3-hdegoede@redhat.com

Some x86 Android tablets have SPI devices which are not properly described
in their DSDT. Add support for instantiating SPI devices.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231104205828.63139-2-hdegoede@redhat.com

The I2C-core already has filtering to skip i2c_client instantiation for
LNXVIDEO acpi_device-s with I2cSerialBus resources, since LNXVIDEO devices
are not i2c_client-s and are handled by the acpi_video driver.

This filtering was added to i2c-core-acpi.c in commit 3a4991a9

 ("i2c:
acpi: Do not create i2c-clients for LNXVIDEO ACPI devices").

Now a similar problem has shown up where the SPI-core is instantiating
an unwanted SPI-device for a SpiSerialBus resource under a LNXVIDEO
acpi_device. On a Lenovo Yoga Tab 3 YT3-X90F this unwanted SPI-device
instanstantiation causes the SPI-device instanstantiation for the WM5102
audio codec to fail with:

[   21.988441] pxa2xx-spi 8086228E:00: chipselect 0 already in use

Instead of duplicating the I2C-core filtering in the SPI-core code, push
the filtering of SerialBus resources under LNXVIDEO acpi_device-s up into
the ACPI-core by adding the LNXVIDEO HID to ignore_serial_bus_ids[].

Note the filtering in the I2C-core i2c_acpi_do_lookup() function is still
necessary because this not only impacts i2c_client instantiation but it
also makes the I2C-core ignore the I2cSerialBus resource when checking what
the maximum speed is the I2C bus supports, which is still necessary.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231104205828.63139-1-hdegoede@redhat.com

This commit fixes coccinelle warning in macro function
IS_VRING_DROP() which complains conversion to bool not needed here.

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/ZUWIIKbz4vukl8qb@octinomon


Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Currently, the driver still uses the legacy GUID-based interface
to invoke WMI methods. Use the modern bus-based interface instead.

Tested on a Lenovo E51-80.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231103182526.3524-4-W_Armin@gmx.de


Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Currently, the driver was still using the deprecated GUID-based
interface to query/set data blocks. Use the modern bus-based
interface for this.

Tested with a custom SSDT from the Intel Slim Bootloader project.

Reviewed-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231103182526.3524-3-W_Armin@gmx.de


Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Add a helper macro for WMI drivers to cast a device to
the corresponding WMI device. This should replace some
boilerplate code.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231103182526.3524-2-W_Armin@gmx.de


Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Currently, WMI drivers have to use the deprecated GUID-based
interface when setting data blocks. This prevents those
drivers from fully moving away from this interface.

Provide wmidev_block_set() so drivers using wmi_set_block() can
fully migrate to the modern bus-based interface.

Tested with a custom SSDT from the Intel Slim Bootloader project.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231103182526.3524-1-W_Armin@gmx.de


Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))

Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/
Fixes: b6e3d1ba

 ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc architecture fixes from Helge Deller:

 - Include the upper 5 address bits when inserting TLB entries on a
   64-bit kernel.

   On physical machines those are ignored, but in qemu it's nice to have
   them included and to be correct.

 - Stop the 64-bit kernel and show a warning if someone tries to boot on
   a machine with a 32-bit CPU

 - Fix a "no previous prototype" warning in parport-gsc

* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Prevent booting 64-bit kernels on PA1.x machines
  parport: gsc: mark init function static
  parisc/pgtable: Do not drop upper 5 address bits of physical address

Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - support PREEMPT_DYNAMIC with static keys

 - relax memory ordering for atomic operations

 - support BPF CPU v4 instructions for LoongArch

 - some build and runtime warning fixes

* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  selftests/bpf: Enable cpu v4 tests for LoongArch
  LoongArch: BPF: Support signed mod instructions
  LoongArch: BPF: Support signed div instructions
  LoongArch: BPF: Support 32-bit offset jmp instructions
  LoongArch: BPF: Support unconditional bswap instructions
  LoongArch: BPF: Support sign-extension mov instructions
  LoongArch: BPF: Support sign-extension load instructions
  LoongArch: Add more instruction opcodes and emit_* helpers
  LoongArch/smp: Call rcutree_report_cpu_starting() earlier
  LoongArch: Relax memory ordering for atomic operations
  LoongArch: Mark __percpu functions as always inline
  LoongArch: Disable module from accessing external data directly
  LoongArch: Support PREEMPT_DYNAMIC with static keys

Pull powerpc fixes from Michael Ellerman:

 - Finish a refactor of pgprot_framebuffer() which dependend
   on some changes that were merged via the drm tree

 - Fix some kernel-doc warnings to quieten the bots

Thanks to Nathan Lynch and Thomas Zimmermann.

* tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
  powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
  powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
  powerpc: Remove file parameter from phys_mem_access_prot()
  powerpc/machdep: Remove trailing whitespaces

Pull smb client fixes from Steve French:

 - ctime caching fix (for setxattr)

 - encryption fix

 - DNS resolver mount fix

 - debugging improvements

 - multichannel fixes including cases where server stops or starts
   supporting multichannel after mount

 - reconnect fix

 - minor cleanups

* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  cifs: handle when server stops supporting multichannel
  cifs: handle when server starts supporting multichannel
  Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
  smb3: allow dumping session and tcon id to improve stats analysis and debugging
  smb: client: fix mount when dns_resolver key is not available
  smb3: fix caching of ctime on setxattr
  smb3: minor cleanup of session handling code
  cifs: reconnect work should have reference on server struct
  cifs: do not pass cifs_sb when trying to add channels
  cifs: account for primary channel in the interface list
  cifs: distribute channels across interfaces based on speed
  cifs: handle cases where a channel is closed
  smb3: more minor cleanups for session handling routines
  smb3: minor RDMA cleanup
  cifs: Fix encryption of cleared, but unset rq_iter data buffers

Merge tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

 - Documentation update: Add a note about argument and return value
   fetching is the best effort because it depends on the type.

 - objpool: Fix to make internal global variables static in
   test_objpool.c.

 - kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
   same prototypes in asm/kprobes.h for some architectures, but some of
   them are missing the prototype and it causes a warning. So move the
   prototype into linux/kprobes.h.

 - tracing: Fix to check the tracepoint event and return event at
   parsing stage. The tracepoint event doesn't support %return but if
   $retval exists, it will be converted to %return silently. This finds
   that case and rejects it.

 - tracing: Fix the order of the descriptions about the parameters of
   __kprobe_event_gen_cmd_start() to be consistent with the argument
   list of the function.

* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/kprobes: Fix the order of argument descriptions
  tracing: fprobe-event: Fix to check tracepoint event and return
  kprobes: unify kprobes_exceptions_nofify() prototypes
  lib: test_objpool: make global variables static
  Documentation: tracing: Add a note about argument and retval access

Pull fbdev fixes and cleanups from Helge Deller:

 - fix double free and resource leaks in imsttfb

 - lots of remove callback cleanups and section mismatch fixes in
   omapfb, amifb and atmel_lcdfb

 - error code fix and memparse simplification in omapfb

* tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits)
  fbdev: fsl-diu-fb: mark wr_reg_wa() static
  fbdev: amifb: Convert to platform remove callback returning void
  fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning
  fbdev: hyperv_fb: fix uninitialized local variable use
  fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void
  fbdev: omapfb/tfp410: Convert to platform remove callback returning void
  fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void
  fbdev: omapfb/opa362: Convert to platform remove callback returning void
  fbdev: omapfb/hdmi: Convert to platform remove callback returning void
  fbdev: omapfb/dvi: Convert to platform remove callback returning void
  fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void
  fbdev: omapfb/dpi: Convert to platform remove callback returning void
  fbdev: omapfb/analog-tv: Convert to platform remove callback returning void
  fbdev: atmel_lcdfb: Convert to platform remove callback returning void
  fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  ...

The order of descriptions should be consistent with the argument list of
the function, so "kretprobe" should be the second one.

int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe,
                                 const char *name, const char *loc, ...)

Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/

Fixes: 2a588dd1

 ("tracing: Add kprobe event command generation functions")
Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Pull drm fixes from Daniel Vetter:
 "Dave's VPN to the big machine died, so it's on me to do fixes pr this
  and next week while everyone else is at plumbers.

   - big pile of amd fixes, but mostly for hw support newly added in 6.7

   - i915 fixes, mostly minor things

   - qxl memory leak fix

   - vc4 uaf fix in mock helpers

   - syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE"

* tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits)
  drm/amdgpu: fix error handling in amdgpu_vm_init
  drm/amdgpu: Fix possible null pointer dereference
  drm/amdgpu: move UVD and VCE sched entity init after sched init
  drm/amdgpu: move kfd_resume before the ip late init
  drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
  drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2)
  drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5)
  drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support
  drm/amdgpu: fix software pci_unplug on some chips
  drm/amd/display: remove duplicated argument
  drm/amdgpu: correct mca debugfs dump reg list
  drm/amdgpu: correct acclerator check architecutre dump
  drm/amdgpu: add pcs xgmi v6.4.0 ras support
  drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3
  drm/amdgpu: disable smu v13.0.6 mca debug mode by default
  drm/amdgpu: Support multiple error query modes
  drm/amdgpu: refine smu v13.0.6 mca dump driver
  drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2)
  drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV
  drm: amd: Resolve Sphinx unexpected indentation warning
  ...

Pull arm64 fixes from Catalin Marinas:
 "Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
  MediaTek firmware:

   - Move the MediaTek GIC quirk handling from irqchip to core. Before
     the merging window commit 44bd78dd ("irqchip/gic-v3: Disable
     pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
     addressed this issue. Fixed now at a deeper level in the arch code

   - Reject events meant for other PMUs in the CoreSight PMU driver,
     otherwise some of the core PMU events would disappear

   - Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
     causing some events to be invisible

   - Remove duplicate declaration of __arm64_sys##name following the
     patch to avoid prototype warning for syscalls

   - Typos in the elf_hwcap documentation"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/syscall: Remove duplicate declaration
  Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
  arm64: Move MediaTek GIC quirk handling from irqchip to core
  arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
  perf: arm_cspmu: Reject events meant for other PMUs
  Documentation/arm64: Fix typos in elf_hwcaps