Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes for net:

1) Follow up patch to fix a compilation warning in a recent IPVS fix:
   098e13f5

 ("ipvs: fix dependency on nf_defrag_ipv6").

2) Bogus ENOENT error on flush after rule deletion in the same batch,
   reported by Phil Sutter.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Recent commit below has introduced a bug in netcp driver that causes
the ethss driver probe failure and thus break the networking function
on K2 SoCs such as K2HK, K2L, K2E etc. This patch fixes the issue to
restore networking on the above SoCs.

Fixes: 21c328dc

 ("net: ethernet: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the missing device reference release-after-use in
the positive leg of the roce reset API of the HNS DSAF.

Fixes: c969c6e7

 ("net: hns: Fix object reference leaks in hns_dsaf_roce_reset()")
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2019-02-18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers



Kalle Valo says:

====================
wireless-drivers fixes for 5.0

Hopefully the last set of fixes for 5.0, only fix this time.

mt76

* fix regression with resume on mt76x0u USB devices
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

We are saving the status of EEE even before we try to enable it. This
leads to a race with XMIT function that tries to arm EEE timer before we
set it up.

Fix this by only saving the EEE parameters after all operations are
performed with success.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Fixes: d765955d

 ("stmmac: add the Energy Efficient Ethernet support")
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michal Kalderon says:

====================
qed: iWARP - fix some syn related issues.

This series fixes two bugs related to iWARP syn processing flow.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

The ll2 forwards all syn packets to the driver without validating the mac
address. Add validation check in the driver's iWARP listener flow and drop
the packet if it isn't intended for the device.

Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The assumption that the maximum size of a syn packet is 128 bytes
is wrong. Tunneling headers were not accounted for.
Allocate buffers large enough for mtu.

Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RTL8153-BD is used in Dell DA300 type-C dongle.
It should be added to the whitelist of devices to activate MAC address
pass through.

Per confirming with Realtek all devices containing RTL8153-BD should
activate MAC pass through and there won't use pass through bit on efuse
like in RTL8153-AD.

Signed-off-by: David Chen <david.chen7@dell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

spin_lock_bh() is used in table_path_del() but rcu_read_unlock()
is used for unlocking. Fix it by using spin_unlock_bh() instead
of rcu_read_unlock() in the error handling case.

Fixes: b4c3fbe6

 ("mac80211: Use linked list instead of rhashtable walk for mesh tables")
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a spelling mistake in a en_err error message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

KASAN has found use-after-free in sockfs_setattr.
The existed commit 6d8c50dc ("socket: close race condition between sock_close()
and sockfs_setattr()") is to fix this simillar issue, but it seems to ignore
that crypto module forgets to set the sk to NULL after af_alg_release.

KASAN report details as below:
BUG: KASAN: use-after-free in sockfs_setattr+0x120/0x150
Write of size 4 at addr ffff88837b956128 by task syz-executor0/4186

CPU: 2 PID: 4186 Comm: syz-executor0 Not tainted xxx + #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.10.2-1ubuntu1 04/01/2014
Call Trace:
 dump_stack+0xca/0x13e
 print_address_description+0x79/0x330
 ? vprintk_func+0x5e/0xf0
 kasan_report+0x18a/0x2e0
 ? sockfs_setattr+0x120/0x150
 sockfs_setattr+0x120/0x150
 ? sock_register+0x2d0/0x2d0
 notify_change+0x90c/0xd40
 ? chown_common+0x2ef/0x510
 chown_common+0x2ef/0x510
 ? chmod_common+0x3b0/0x3b0
 ? __lock_is_held+0xbc/0x160
 ? __sb_start_write+0x13d/0x2b0
 ? __mnt_want_write+0x19a/0x250
 do_fchownat+0x15c/0x190
 ? __ia32_sys_chmod+0x80/0x80
 ? trace_hardirqs_on_thunk+0x1a/0x1c
 __x64_sys_fchownat+0xbf/0x160
 ? lockdep_hardirqs_on+0x39a/0x5e0
 do_syscall_64+0xc8/0x580
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462589
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89
f7 48 89 d6 48 89
ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3
48 c7 c1 bc ff ff
ff f7 d8 64 89 01 48
RSP: 002b:00007fb4b2c83c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000104
RAX: ffffffffffffffda RBX: 000000000072bfa0 RCX: 0000000000462589
RDX: 0000000000000000 RSI: 00000000200000c0 RDI: 0000000000000007
RBP: 0000000000000005 R08: 0000000000001000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb4b2c846bc
R13: 00000000004bc733 R14: 00000000006f5138 R15: 00000000ffffffff

Allocated by task 4185:
 kasan_kmalloc+0xa0/0xd0
 __kmalloc+0x14a/0x350
 sk_prot_alloc+0xf6/0x290
 sk_alloc+0x3d/0xc00
 af_alg_accept+0x9e/0x670
 hash_accept+0x4a3/0x650
 __sys_accept4+0x306/0x5c0
 __x64_sys_accept4+0x98/0x100
 do_syscall_64+0xc8/0x580
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 4184:
 __kasan_slab_free+0x12e/0x180
 kfree+0xeb/0x2f0
 __sk_destruct+0x4e6/0x6a0
 sk_destruct+0x48/0x70
 __sk_free+0xa9/0x270
 sk_free+0x2a/0x30
 af_alg_release+0x5c/0x70
 __sock_release+0xd3/0x280
 sock_close+0x1a/0x20
 __fput+0x27f/0x7f0
 task_work_run+0x136/0x1b0
 exit_to_usermode_loop+0x1a7/0x1d0
 do_syscall_64+0x461/0x580
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Syzkaller reproducer:
r0 = perf_event_open(&(0x7f0000000000)={0x0, 0x70, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, @perf_config_ext}, 0x0, 0x0,
0xffffffffffffffff, 0x0)
r1 = socket$alg(0x26, 0x5, 0x0)
getrusage(0x0, 0x0)
bind(r1, &(0x7f00000001c0)=@alg={0x26, 'hash\x00', 0x0, 0x0,
'sha256-ssse3\x00'}, 0x80)
r2 = accept(r1, 0x0, 0x0)
r3 = accept4$unix(r2, 0x0, 0x0, 0x0)
r4 = dup3(r3, r0, 0x0)
fchownat(r4, &(0x7f00000000c0)='\x00', 0x0, 0x0, 0x1000)

Fixes: 6d8c50dc

 ("socket: close race condition between sock_close() and sockfs_setattr()")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexander Duyck says:

====================
Address recent issues found in netdev page_frag_alloc usage

This patch set addresses a couple of issues that I had pointed out to Jann
Horn in response to a recent patch submission.

The first issue is that I wanted to avoid the need to read/modify/write the
size value in order to generate the value for pagecnt_bias. Instead we can
just use a fixed constant which reduces the need for memory read operations
and the overall number of instructions to update the pagecnt bias values.

The other, and more important issue is, that apparently we were letting tun
access the napi_alloc_cache indirectly through netdev_alloc_frag and as a
result letting it create unaligned accesses via unaligned allocations. In
order to prevent this I have added a call to SKB_DATA_ALIGN for the fragsz
field so that we will keep the offset in the napi_alloc_cache
SMP_CACHE_BYTES aligned.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

This patch addresses the fact that there are drivers, specifically tun,
that will call into the network page fragment allocators with buffer sizes
that are not cache aligned. Doing this could result in data alignment
and DMA performance issues as these fragment pools are also shared with the
skb allocator and any other devices that will use napi_alloc_frags or
netdev_alloc_frags.

Fixes: ffde7328

 ("net: Split netdev_alloc_frag into __alloc_page_frag and add __napi_alloc_frag")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch replaces the size + 1 value introduced with the recent fix for 1
byte allocs with a constant value.

The idea here is to reduce code overhead as the previous logic would have
to read size into a register, then increment it, and write it back to
whatever field was being used. By using a constant we can avoid those
memory reads and arithmetic operations in favor of just encoding the
maximum value into the operation itself.

Fixes: 2c2ade81

 ("mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs")
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
tcp: fix possible crash in tcp_v4_err()

soukjin bae reported a crash in tcp_v4_err() that we
root caused to a missing initialization.

Second patch adds a sanity check in tcp_v4_err() to avoid
future potential problems. Ignoring an ICMP message
is probably better than crashing a machine.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ICMP handlers are not very often stressed, we should
make them more resilient to bugs that might surface in
the future.

If there is no packet in retransmit queue, we should
avoid a NULL deref.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: soukjin bae <soukjin.bae@samsung.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

soukjin bae reported a crash in tcp_v4_err() handling
ICMP_DEST_UNREACH after tcp_write_queue_head(sk)
returned a NULL pointer.

Current logic should have prevented this :

  if (seq != tp->snd_una  || !icsk->icsk_retransmits ||
      !icsk->icsk_backoff || fastopen)
      break;

Problem is the write queue might have been purged
and icsk_backoff has not been cleared.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: soukjin bae <soukjin.bae@samsung.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If mv643xx_eth_shared_of_probe() fails, mv643xx_eth_shared_probe()
leaves clk enabled.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 1199:68C0 USB ID is reused by Sierra WP7607 which requires the DTR
quirk to be detected. Apply QMI_QUIRK_SET_DTR unconditionally as
already done for other IDs shared between different devices.

Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

GMAC IP is little-endian and used on several kind of CPU (big or little
endian). Main callbacks functions of the stmmac drivers take care about
it. It was not the case for dwmac4_get_timestamp function.

Fixes: ba1ffd74

 ("stmmac: fix PTP support for GMAC4")
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MSG_ZEROCOPY implementation for UDP was merged in v5.0,
6e360f73

 ("Merge branch 'udp-msg_zerocopy'").

Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function-local variable "delay" enters the loop interpreted as delay
in bits. However, inside the loop it gets overwritten by the result of
mlxsw_sp_pg_buf_delay_get(), and thus leaves the loop as quantity in
cells. Thus on second and further loop iterations, the headroom for a
given priority is configured with a wrong size.

Fix by introducing a loop-local variable, delay_cells. Rename thres to
thres_cells for consistency.

Fixes: f417f04d

 ("mlxsw: spectrum: Refactor port buffer configuration")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf 2019-02-16

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) fix lockdep false positive in bpf_get_stackid(), from Alexei.

2) several AF_XDP fixes, from Bjorn, Magnus, Davidlohr.

3) fix narrow load from struct bpf_sock, from Martin.

4) mips JIT fixes, from Paul.

5) gso handling fix in bpf helpers, from Willem.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: 3b89ea9c

 ("net: Fix for_each_netdev_feature on Big endian")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When CONFIG_IP_VS_IPV6 is not defined, build produced this warning:

net/netfilter/ipvs/ip_vs_ctl.c:899:6: warning: unused variable ‘ret’ [-Wunused-variable]
  int ret = 0;
      ^~~

Fix this by moving the declaration of 'ret' in the CONFIG_IP_VS_IPV6
section in the same function.

While at it, drop its unneeded initialisation.

Fixes: 098e13f5

 ("ipvs: fix dependency on nf_defrag_ipv6")
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Florian Fainelli says:

====================
net: dsa: b53: VLAN and L2 fixes

This patch series contains a collection of fixes to the b53 driver in
order to:

- consistently program the same default VLAN ID when a port is bridged
  or not
- properly account for VLAN filtering being turned on/off and turning
  on ingress VID checking accordingly
- have SYSTEMPORT properly forward BPDU frames to the network stack
  (which it did not)
- do not assume that WoL is supported by the DSA master network device
  we are connected to
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

The CPU port is special and does not need to obey VLAN restrictions as
far as untagged traffic goes, also, having the CPU port be part of a
particular PVID is against the idea of keeping it tagged in all VLANs.

Fixes: ca893194

 ("net: dsa: b53: Keep CPU port as tagged in all VLANs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We assume in the bcm_sf2 driver that the DSA master network device
supports ethtool_ops::{get,set}_wol operations, which is not a given.
Avoid de-referencing potentially non-existent function pointers and
check them as we should.

Fixes: 96e65d7f

 ("net: dsa: bcm_sf2: add support for Wake-on-LAN")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SYSTEMPORT has its RXCHK parser block that attempts to validate the
packet structures, unfortunately setting the L2 header check bit will
cause Bridge PDUs (BPDUs) to be incorrectly rejected because they look
like LLC/SNAP packets with a non-IPv4 or non-IPv6 Ethernet Type.

Fixes: 4e8aedfe78c7 ("net: systemport: Turn on offloads by default")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

VLAN filtering can be built into the kernel, and also dynamically turned
on/off through the bridge master device. Allow re-configuring the switch
appropriately to account for that by deciding whether VLAN table
(v_table) misses should lead to a drop or forward.

Fixes: a2482d2c

 ("net: dsa: b53: Plug in VLAN support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We were not consistent in how the default VID of a given port was
defined, b53_br_leave() would make sure the VLAN ID would be either 0/1
depending on the switch generation, but b53_configure_vlan(), which is
the default configuration would unconditionally set it to 1. The correct
value is 1 for 5325/5365 series and 0 otherwise. To avoid repeating that
mistake ever again, introduce a helper function: b53_default_pvid() to
factor that out.

Fixes: 967dd82f

 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Syzkaller again found a path to a kernel crash through bad gso input.
By building an excessively large packet to cause an skb field to wrap.

If VIRTIO_NET_HDR_F_NEEDS_CSUM was set this would have been dropped in
skb_partial_csum_set.

GSO packets that do not set checksum offload are suspicious and rare.
Most callers of virtio_net_hdr_to_skb already pass them to
skb_probe_transport_header.

Move that test forward, change it to detect parse failure and drop
packets on failure as those cleary are not one of the legitimate
VIRTIO_NET_HDR_GSO types.

Fixes: bfd5f4a3 ("packet: Add GSO/csum offload support.")
Fixes: f43798c2

 ("tun: Allow GSO using virtio_net_hdr")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The features attribute is of type u64 and stored in the native endianes on
the system. The for_each_set_bit() macro takes a pointer to a 32 bit array
and goes over the bits in this area. On little Endian systems this also
works with an u64 as the most significant bit is on the highest address,
but on big endian the words are swapped. When we expect bit 15 here we get
bit 47 (15 + 32).

This patch converts it more or less to its own for_each_set_bit()
implementation which works on 64 bit integers directly. This is then
completely in host endianness and should work like expected.

Fixes: fd867d51

 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some PHY drivers like the generic one do not provide a read_status
callback on their own but rely on genphy_read_status being called
directly.

With the current code, this results in a NULL function pointer call.
Call genphy_read_status instead when there is no specific callback.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit c706863b ("net: ip6_gre: always reports o_key to
userspace"), ip6gre and ip6gretap tunnels started reporting TUNNEL_KEY
output flag even if it is not configured.
ip6gre_fill_info checks erspan_ver value to add TUNNEL_KEY for
erspan tunnels, however in commit 84581bda ("erspan: set
erspan_ver to 1 by default when adding an erspan dev")
erspan_ver is initialized to 1 even for ip6gre or ip6gretap
Fix the issue moving erspan_ver initialization in a dedicated routine

Fixes: c706863b

 ("net: ip6_gre: always reports o_key to userspace")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2019-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211



Johannes Berg says:

====================
Just a few fixes this time:
 * mesh rhashtable fixes from Herbert
 * a small error path fix when starting AP interfaces
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

REG_32BIT_ZERO_EX and REG_64BIT are always handled in exactly the same
way, and reg_val_propagate_range() never actually sets any register to
type REG_32BIT_ZERO_EX.

Remove the redundant & unused REG_32BIT_ZERO_EX.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The function prototype used to call JITed eBPF code (ie. the type of the
struct bpf_prog bpf_func field) returns an unsigned int. The MIPS n64
ABI that MIPS64 kernels target defines that 32 bit integers should
always be sign extended when passed in registers as either arguments or
return values.

This means that when returning any value which may not already be sign
extended (ie. of type REG_64BIT or REG_32BIT_ZERO_EX) we need to perform
that sign extension in order to comply with the n64 ABI. Without this we
see strange looking test failures from test_bpf.ko, such as:

  test_bpf: #65 ALU64_MOV_X:
    dst = 4294967295 jited:1 ret -1 != -1 FAIL (1 times)

Although the return value printed matches the expected value, this is
only because printf is only examining the least significant 32 bits of
the 64 bit register value we returned. The register holding the expected
value is sign extended whilst the v0 register was set to a zero extended
value by our JITed code, so when compared by a conditional branch
instruction the values are not equal.

We already handle this when the return value register is of type
REG_32BIT_ZERO_EX, so simply extend this to also cover REG_64BIT.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: b6bd53f9

 ("MIPS: Add missing file for eBPF JIT.")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Pull block fixes from Jens Axboe:

 - Ensure we insert into the hctx dispatch list, if a request is marked
   as DONTPREP (Jianchao)

 - NVMe pull request, single missing unlock on error fix (Keith)

 - MD pull request, single fix for a potentially data corrupting issue
   (Nate)

 - Floppy check_events regression fix (Yufen)

* tag 'for-linus-20190215' of git://git.kernel.dk/linux-block:
  md/raid1: don't clear bitmap bits on interrupted recovery.
  floppy: check_events callback should not return a negative number
  nvme-pci: add missing unlock for reset error
  blk-mq: insert rq with DONTPREP to hctx dispatch list when requeue