Support setting the EEE tx idle timer also on RTL8168h.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/cfb69ec9-24c4-4aad-9909-fdae3088add4@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a generic setter for the EEE tx idle timer and use it with all
RTL8125/RTL8126 chip versions, in line with the vendor driver.
This prepares for adding EEE tx idle timer support for additional
chip versions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/39beed72-0dc4-4c45-8899-b72c43ab62a7@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This adds LED support for RTL8125/RTL8126.

Note: Due to missing datasheets changing the 5Gbps link mode isn't
supported for RTL8126.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/f982602c-9de3-4ca6-85a3-2c1d118dcb15@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Convert the Qualcomm Atheros AR9331 built-in switch bindings to DT
schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240212182911.233819-1-krzysztof.kozlowski@linaro.org


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

FEC_ENET_FCE is the Flow Control Enable bit (bit 5) of the RCR.
This is now defined as FEC_RCR_FLOWCTL.

Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240212153717.10023-2-csokas.bence@prolan.hu


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add defines for bits of ECR, RCR control registers, TX watermark etc.

Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240212153717.10023-1-csokas.bence@prolan.hu


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet says:

====================
net: adopt netdev_lockdep_set_classes()

Instead of waiting for syzbot to discover lockdep false positives,
make sure we use netdev_lockdep_set_classes() a bit more.
====================

Link: https://lore.kernel.org/r/20240212140700.2795436-1-edumazet@google.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Based on a syzbot report, it appears many virtual
drivers do not yet use netdev_lockdep_set_classes(),
triggerring lockdep false positives.

WARNING: possible recursive locking detected
6.8.0-rc4-next-20240212-syzkaller #0 Not tainted

syz-executor.0/19016 is trying to acquire lock:
 ffff8880162cb298 (_xmit_ETHER#2){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
 ffff8880162cb298 (_xmit_ETHER#2){+.-.}-{2:2}, at: __netif_tx_lock include/linux/netdevice.h:4452 [inline]
 ffff8880162cb298 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x1c4/0x5f0 net/sched/sch_generic.c:340

but task is already holding lock:
 ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
 ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: __netif_tx_lock include/linux/netdevice.h:4452 [inline]
 ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x1c4/0x5f0 net/sched/sch_generic.c:340

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
  lock(_xmit_ETHER#2);
  lock(_xmit_ETHER#2);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

9 locks held by syz-executor.0/19016:
  #0: ffffffff8f385208 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock net/core/rtnetlink.c:79 [inline]
  #0: ffffffff8f385208 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x82c/0x1040 net/core/rtnetlink.c:6603
  #1: ffffc90000a08c00 ((&in_dev->mr_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0xc0/0x600 kernel/time/timer.c:1697
  #2: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline]
  #2: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline]
  #2: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1360 net/ipv4/ip_output.c:228
  #3: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: local_bh_disable include/linux/bottom_half.h:20 [inline]
  #3: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: rcu_read_lock_bh include/linux/rcupdate.h:802 [inline]
  #3: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x2c4/0x3b10 net/core/dev.c:4284
  #4: ffff8880416e3258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: spin_trylock include/linux/spinlock.h:361 [inline]
  #4: ffff8880416e3258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: qdisc_run_begin include/net/sch_generic.h:195 [inline]
  #4: ffff8880416e3258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_xmit_skb net/core/dev.c:3771 [inline]
  #4: ffff8880416e3258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x1262/0x3b10 net/core/dev.c:4325
  #5: ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
  #5: ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: __netif_tx_lock include/linux/netdevice.h:4452 [inline]
  #5: ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x1c4/0x5f0 net/sched/sch_generic.c:340
  #6: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline]
  #6: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline]
  #6: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1360 net/ipv4/ip_output.c:228
  #7: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: local_bh_disable include/linux/bottom_half.h:20 [inline]
  #7: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: rcu_read_lock_bh include/linux/rcupdate.h:802 [inline]
  #7: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x2c4/0x3b10 net/core/dev.c:4284
  #8: ffff888014d9d258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: spin_trylock include/linux/spinlock.h:361 [inline]
  #8: ffff888014d9d258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: qdisc_run_begin include/net/sch_generic.h:195 [inline]
  #8: ffff888014d9d258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_xmit_skb net/core/dev.c:3771 [inline]
  #8: ffff888014d9d258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x1262/0x3b10 net/core/dev.c:4325

stack backtrace:
CPU: 1 PID: 19016 Comm: syz-executor.0 Not tainted 6.8.0-rc4-next-20240212-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Call Trace:
 <IRQ>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
  check_deadlock kernel/locking/lockdep.c:3062 [inline]
  validate_chain+0x15c1/0x58e0 kernel/locking/lockdep.c:3856
  __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137
  lock_acquire+0x1e4/0x530 kernel/locking/lockdep.c:5754
  __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
  _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
  spin_lock include/linux/spinlock.h:351 [inline]
  __netif_tx_lock include/linux/netdevice.h:4452 [inline]
  sch_direct_xmit+0x1c4/0x5f0 net/sched/sch_generic.c:340
  __dev_xmit_skb net/core/dev.c:3784 [inline]
  __dev_queue_xmit+0x1912/0x3b10 net/core/dev.c:4325
  neigh_output include/net/neighbour.h:542 [inline]
  ip_finish_output2+0xe66/0x1360 net/ipv4/ip_output.c:235
  iptunnel_xmit+0x540/0x9b0 net/ipv4/ip_tunnel_core.c:82
  ip_tunnel_xmit+0x20ee/0x2960 net/ipv4/ip_tunnel.c:831
  erspan_xmit+0x9de/0x1460 net/ipv4/ip_gre.c:720
  __netdev_start_xmit include/linux/netdevice.h:4989 [inline]
  netdev_start_xmit include/linux/netdevice.h:5003 [inline]
  xmit_one net/core/dev.c:3555 [inline]
  dev_hard_start_xmit+0x242/0x770 net/core/dev.c:3571
  sch_direct_xmit+0x2b6/0x5f0 net/sched/sch_generic.c:342
  __dev_xmit_skb net/core/dev.c:3784 [inline]
  __dev_queue_xmit+0x1912/0x3b10 net/core/dev.c:4325
  neigh_output include/net/neighbour.h:542 [inline]
  ip_finish_output2+0xe66/0x1360 net/ipv4/ip_output.c:235
  igmpv3_send_cr net/ipv4/igmp.c:723 [inline]
  igmp_ifc_timer_expire+0xb71/0xd90 net/ipv4/igmp.c:813
  call_timer_fn+0x17e/0x600 kernel/time/timer.c:1700
  expire_timers kernel/time/timer.c:1751 [inline]
  __run_timers+0x621/0x830 kernel/time/timer.c:2038
  run_timer_softirq+0x67/0xf0 kernel/time/timer.c:2051
  __do_softirq+0x2bc/0x943 kernel/softirq.c:554
  invoke_softirq kernel/softirq.c:428 [inline]
  __irq_exit_rcu+0xf2/0x1c0 kernel/softirq.c:633
  irq_exit_rcu+0x9/0x30 kernel/softirq.c:645
  instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1076 [inline]
  sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1076
 </IRQ>
 <TASK>
  asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
 RIP: 0010:resched_offsets_ok kernel/sched/core.c:10127 [inline]
 RIP: 0010:__might_resched+0x16f/0x780 kernel/sched/core.c:10142
Code: 00 4c 89 e8 48 c1 e8 03 48 ba 00 00 00 00 00 fc ff df 48 89 44 24 38 0f b6 04 10 84 c0 0f 85 87 04 00 00 41 8b 45 00 c1 e0 08 <01> d8 44 39 e0 0f 85 d6 00 00 00 44 89 64 24 1c 48 8d bc 24 a0 00
RSP: 0018:ffffc9000ee069e0 EFLAGS: 00000246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8880296a9e00
RDX: dffffc0000000000 RSI: ffff8880296a9e00 RDI: ffffffff8bfe8fa0
RBP: ffffc9000ee06b00 R08: ffffffff82326877 R09: 1ffff11002b5ad1b
R10: dffffc0000000000 R11: ffffed1002b5ad1c R12: 0000000000000000
R13: ffff8880296aa23c R14: 000000000000062a R15: 1ffff92001dc0d44
  down_write+0x19/0x50 kernel/locking/rwsem.c:1578
  kernfs_activate fs/kernfs/dir.c:1403 [inline]
  kernfs_add_one+0x4af/0x8b0 fs/kernfs/dir.c:819
  __kernfs_create_file+0x22e/0x2e0 fs/kernfs/file.c:1056
  sysfs_add_file_mode_ns+0x24a/0x310 fs/sysfs/file.c:307
  create_files fs/sysfs/group.c:64 [inline]
  internal_create_group+0x4f4/0xf20 fs/sysfs/group.c:152
  internal_create_groups fs/sysfs/group.c:192 [inline]
  sysfs_create_groups+0x56/0x120 fs/sysfs/group.c:218
  create_dir lib/kobject.c:78 [inline]
  kobject_add_internal+0x472/0x8d0 lib/kobject.c:240
  kobject_add_varg lib/kobject.c:374 [inline]
  kobject_init_and_add+0x124/0x190 lib/kobject.c:457
  netdev_queue_add_kobject net/core/net-sysfs.c:1706 [inline]
  netdev_queue_update_kobjects+0x1f3/0x480 net/core/net-sysfs.c:1758
  register_queue_kobjects net/core/net-sysfs.c:1819 [inline]
  netdev_register_kobject+0x265/0x310 net/core/net-sysfs.c:2059
  register_netdevice+0x1191/0x19c0 net/core/dev.c:10298
  bond_newlink+0x3b/0x90 drivers/net/bonding/bond_netlink.c:576
  rtnl_newlink_create net/core/rtnetlink.c:3506 [inline]
  __rtnl_newlink net/core/rtnetlink.c:3726 [inline]
  rtnl_newlink+0x158f/0x20a0 net/core/rtnetlink.c:3739
  rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6606
  netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
  netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
  netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
  netlink_sendmsg+0xa3c/0xd70 net/netlink/af_netlink.c:1908
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x221/0x270 net/socket.c:745
  __sys_sendto+0x3a4/0x4f0 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0xde/0x100 net/socket.c:2199
 do_syscall_64+0xfb/0x240
 entry_SYSCALL_64_after_hwframe+0x6d/0x75
RIP: 0033:0x7fc3fa87fa9c

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240212140700.2795436-4-edumazet@google.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

br_set_lockdep_class() is missing many details.
Use generic netdev_lockdep_set_classes() to not worry anymore.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240212140700.2795436-3-edumazet@google.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vlan uses vlan_dev_set_lockdep_class() which lacks qdisc_tx_busylock
initialization.

Use generic netdev_lockdep_set_classes() to not worry anymore.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240212140700.2795436-2-edumazet@google.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet says:

====================
net: use net->dev_by_index in two places

Bring "ip link" ordering to /proc/net/dev one (by ifindexes).

Do the same for /proc/net/vlan/config

v2: https://lore.kernel.org/all/20240209142441.6c56435b@kernel.org/
====================

Link: https://lore.kernel.org/r/20240211214404.1882191-1-edumazet@google.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Adopt net->dev_by_index as I did in commit 0e0939c0
("net-procfs: use xarray iterator to implement /proc/net/dev")

This makes sure an existing device is always visible in the dump,
regardless of concurrent insertions/deletions.

v2: added suggestions from Jakub Kicinski and Ido Schimmel,
    thanks for the help !

Link: https://lore.kernel.org/all/20240209142441.6c56435b@kernel.org/
Link: https://lore.kernel.org/all/ZckR-XOsULLI9EHc@shredder/


Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240211214404.1882191-3-edumazet@google.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Adopt net->dev_by_index as I did in commit 0e0939c0


("net-procfs: use xarray iterator to implement /proc/net/dev")

Not only this removes quadratic behavior, it also makes sure
an existing vlan device is always visible in the dump,
regardless of concurrent net->dev_base_head changes.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240211214404.1882191-2-edumazet@google.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

PMD Global Transmit Disable bit should be cleared for normal operation.
This should be HW default, however I found that on Asus RT-AX89X that uses
AQR113C PHY and firmware 5.4 this bit is set by default.

With this bit set the AQR cannot achieve a link with its link-partner and
it took me multiple hours of digging through the vendor GPL source to find
this out, so lets always clear this bit during .config_init() to avoid a
situation like this in the future.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240211181732.646311-1-robimarko@gmail.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The prologue to codel is using BSD-3 clause and GPL-2 boiler plate
language. Replace it by using SPDX. The automated treewide scan in
commit d2912cb1

 ("treewide: Replace GPLv2 boilerplate/reference with
SPDX - rule 500") did not pickup dual licensed code.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Dave Taht <dave.taht@gmail.com>
Link: https://lore.kernel.org/r/20240211172532.6568-1-stephen@networkplumber.org


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Use core-provided pcpu stats allocation instead of open-coding it in
the driver.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/03f5bb3b-d7f4-48be-ae8a-54862ec4566c@gmail.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

After this commit ba24ea12

 ("net/sched: Retire ipt action")
NET_ACT_IPT is not needed anymore as the action is retired and the code
is removed.

Clean the Kconfig part as well.

Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240209180656.867546-1-harshit.m.mogalapalli@oracle.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Commit 8a7cb245

 ("net: stmmac: Do not enable RX FIFO overflow
interrupts") disabled the RX FIFO overflow interrupts. However, it left the
status variable around, but never checks it.

As stmmac_host_mtl_irq_status() returns only 0 now, the code can be
simplified.

Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20240208-stmmac_irq-v1-1-8bab236026d4@linutronix.de


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Set scope automatically in ip_route_output_ports() (using the socket
SOCK_LOCALROUTE flag). This way, callers don't have to overload the
tos with the RTO_ONLINK flag, like RT_CONN_FLAGS() does.

For callers that don't pass a struct sock, this doesn't change anything
as the scope is still set to RT_SCOPE_UNIVERSE when sk is NULL.

Callers that passed a struct sock and used RT_CONN_FLAGS(sk) or
RT_CONN_FLAGS_TOS(sk, tos) for the tos are modified to use
ip_sock_tos(sk) and RT_TOS(tos) respectively, as overloading tos with
the RTO_ONLINK flag now becomes unnecessary.

In drivers/net/amt.c, all ip_route_output_ports() calls use a 0 tos
parameter, ignoring the SOCK_LOCALROUTE flag of the socket. But the sk
parameter is a kernel socket, which doesn't have any configuration path
for setting SOCK_LOCALROUTE anyway. Therefore, ip_route_output_ports()
will continue to initialise scope with RT_SCOPE_UNIVERSE and amt.c
doesn't need to be modified.

Also, remove RT_CONN_FLAGS() and RT_CONN_FLAGS_TOS() from route.h as
these macros are now unused.

The objective is to eventually remove RTO_ONLINK entirely to allow
converting ->flowi4_tos to dscp_t. This will ensure proper isolation
between the DSCP and ECN bits, thus minimising the risk of introducing
bugs where TOS values interfere with ECN.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/dacfd2ab40685e20959ab7b53c427595ba229e7d.1707496938.git.gnault@redhat.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Make mlx5 compatible with the newly added netlink queue GET APIs.

Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240209202312.30181-1-jdamato@fastly.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet says:

====================
net: avoid slow rcu synchronizations in cleanup_net()

RTNL is a contended mutex, we prefer to expedite rcu synchronizations
in contexts we hold RTNL.

Similarly, cleanup_net() is a single threaded critical component and
should also use synchronize_rcu_expedited() even when not holding RTNL.

First patch removes a barrier with no clear purpose in ipv6_mc_down()
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

nf_conntrack_cleanup_net_list() is calling synchronize_net()
while RTNL is not held. This effectively calls synchronize_rcu().

synchronize_rcu() is much slower than synchronize_rcu_expedited(),
and cleanup_net() is currently single threaded. In many workloads
we want cleanup_net() to be faster, in order to free memory and various
sysfs and procfs entries as fast as possible.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

cleanup_net() is calling synchronize_rcu() right before
acquiring RTNL.

synchronize_rcu() is much slower than synchronize_rcu_expedited(),
and cleanup_net() is currently single threaded. In many workloads
we want cleanup_net() to be fast, in order to free memory and various
sysfs and procfs entries as fast as possible.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tnode_free() should use synchronize_net()
instead of syncronize_rcu() to release RTNL sooner.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

br_vlan_flush() and nbp_vlan_flush() should use synchronize_net()
instead of syncronize_rcu() to release RTNL sooner.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_change_name() holds RTNL, we better use synchronize_net()
instead of plain synchronize_rcu().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As discussed in the past (commit 2d3916f3 ("ipv6: fix skb drops
in igmp6_event_query() and igmp6_event_report()")) I think the
synchronize_net() call in ipv6_mc_down() is not needed.

Under load, synchronize_net() can last between 200 usec and 5 ms.

KASAN seems to agree as well.

Fixes: f185de28

 ("mld: add new workqueues for process mld events")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Suraj Jaiswal says:

====================
Ethernet common fault IRQ support

Changes since v13:
- Update correct sender email

Changes since v12:
- Update correct sender email

Changes since v11:
- Update debug message print

Changes since v10:
- Update commit message

Changes since v9:
- prevent race condition of safety IRQ handling

Changes since v8:
- Use shared IRQ for sfty
- update error message

Changes since v7:
- Add support of common sfty irq on stmmac_request_irq_multi_msi.
- Remove uncecessary blank line.

Changes since v6:
- use name sfty_irq instead of safety_common_irq.

Changes since v5:
- Add description of ECC, DPP, FSM

Changes since v4:
- Fix DT_CHECKER warning
- use name safety for the IRQ.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to listen HW safety IRQ like ECC(error
correction code), DPP(data path parity), FSM(finite state
machine) fault in common IRQ line.

Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add binding doc for safety IRQ. The safety IRQ will be
triggered for ECC(error correction code), DPP(data path
parity), FSM(finite state machine) error.

Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The reported bug is caused by using mii_eee_cap1_mod_linkmode_t()
with an uninitialized bitmap. Fix this by zero-initializing the
struct containing the bitmap.

Fixes: 9bc79134

 ("tg3: convert EEE handling to use linkmode bitmaps")
Reported-by: Srikanth Aithal <sraithal@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Luiz Angelo Daros de Luca says:

====================
net: dsa: realtek: variants to drivers, interfaces to a common module

The current driver consists of two interface modules (SMI and MDIO) and
two family/variant modules (RTL8365MB and RTL8366RB). The SMI and MDIO
modules serve as the platform and MDIO drivers, respectively, calling
functions from the variant modules. In this setup, one interface module
can be loaded independently of the other, but both variants must be
loaded (if not disabled at build time) for any type of interface. This
approach doesn't scale well, especially with the addition of more switch
variants (e.g., RTL8366B), leading to loaded but unused modules.
Additionally, this also seems upside down, as the specific driver code
normally depends on the more generic functions and not the other way
around.

Each variant module was converted into real drivers, serving as both a
platform driver (for switches connected using the SMI interface) and an
MDIO driver (for MDIO-connected switches). The relationship between the
variant and interface modules is reversed, with the variant module now
calling both interface functions (if not disabled at build time). While
in most devices only one interface is likely used, the interface code is
significantly smaller than a variant module, consuming fewer resources
than the previous code. With variant modules now functioning as real
drivers, compatible strings are published only in a single variant
module, preventing conflicts.

The patch series introduces a new common module for functions shared by
both variants. This module also absorbs the two previous interface
modules, as they would always be loaded anyway.

The series relocates the user MII driver from realtek-smi to rtl83xx. It
is now used by MDIO-connected switches instead of the generic DSA
driver. There's a change in how this driver locates the MDIO node. It
now only searches for a child node named "mdio".

The dsa_switch in realtek_priv->ds is now embedded in the struct. It is
always in use and avoids dynamic memory allocation.

Testing has been performed with an RTL8367S (rtl8365mb) using MDIO
interface and an RTL8366RB (rtl8366) with SMI interface.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Embed dsa_switch within realtek_priv to eliminate the need for a second
memory allocation.

Suggested-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The realtek-mdio will now use this driver instead of the generic DSA
driver ("dsa user smi"), which should not be used with OF[1].

With a single ds_ops for both interfaces, the ds_ops in realtek_priv is
no longer necessary. Now, the realtek_variant.ds_ops can be used
directly.

The realtek_priv.setup_interface() has been removed as we can directly
call the new common function.

[1] https://lkml.kernel.org/netdev/20220630200423.tieprdu5fpabflj7@bang-olufsen.dk/T/



Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the user MDIO driver, despite numerous references to SMI, including
its compatible string, there's nothing inherently specific about the SMI
interface in the user MDIO bus. Consequently, the code has been migrated
to the rtl83xx module. All references to SMI have been eliminated.

The MDIO bus id was changed from Realtek-<switch id> to the switch
devname suffixed with :user_mii, giving more information about the bus
it is referencing.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the line assigning dev.of_node in mdio_bus as subsequent
of_mdiobus_register will always overwrite it.

As discussed in [1], allow the DSA core to be simplified, by not
assigning ds->user_mii_bus when the MDIO bus is described in OF, as it
is unnecessary.

Since commit 3b73a7b8 ("net: mdio_bus: add refcounting for fwnodes
to mdiobus"), we can put the "mdio" node just after the MDIO bus
registration.

[1] https://lkml.kernel.org/netdev/20231213120656.x46fyad6ls7sqyzv@skbuf/T/#u



Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The binding docs requires for SMI-connected devices that the switch
must have a child node named "mdio" and with a compatible string of
"realtek,smi-mdio". Meanwile, for MDIO-connected switches, the binding
docs only requires a child node named "mdio".

This patch changes the driver to use the common denominator for both
interfaces, looking for the MDIO node by name, ignoring the compatible
string.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since rtl83xx and realtek-{smi,mdio} are always loaded together,
we can optimize resource usage by consolidating them into a single
module.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some code can be shared between both interface modules (MDIO and SMI)
and among variants. These interface functions migrated to a common
module:

- rtl83xx_lock
- rtl83xx_unlock
- rtl83xx_probe
- rtl83xx_register_switch
- rtl83xx_unregister_switch
- rtl83xx_shutdown
- rtl83xx_remove

The reset during probe was moved to the end of the common probe. This way,
we avoid a reset if anything else fails.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of copying values from the variant, we can keep a reference in
realtek_priv.

This is a preliminary change for sharing code betwen interfaces. It will
allow to move most of the probe into a common module while still allow
code specific to each interface to read variant fields.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>