Skip to content
  1. Jul 29, 2023
  3. Jul 26, 2023
    • Jeffery Miller's avatar
      Input: psmouse - add delay when deactivating for SMBus mode · 92e24e0e
      Jeffery Miller authored 
      

There is a period of time between the psmouse deactivate and the
ability to communicate with the SMBus companion. Insert a
sleep after the deactivate to account for the delay and ensure
the SMBus companion is responsive.

Attempting to read from the SMBus companion too quickly was causing
the touchpad on machines with an i801_smbus companion to stop working
after a sleep/resume cycle.

On resume the rmi4_smbus would fail with errors reading the SMBus version
number:
```
[5454] i2c_i801:i801_check_post:414: i801_smbus 0000:00:1f.3: No response
smbus_result: i2c-0 a=02c f=0000 c=fd BYTE_DATA rd res=-6
rmi4_smbus 0-002c: failed to get SMBus version number!
...
rmi4_f01 rmi4-00.fn01: Failed to restore normal operation: -6.
rmi4_f01 rmi4-00.fn01: Resume failed with code -6.
rmi4_physical rmi4-00: Failed to suspend functions: -6
rmi4_smbus 0-002c: Failed to resume device: -6
```
In this case the rmi_smb_get_version fails with -ENXIO if it happens too
soon after the preceding serio_resume -> psmouse_deactivate call.

On boot this issue could cause the touchpad to stay in the limited PS/2
mode. This only reproduced in 1 in 10 boots on the Lenovo T440p.
Failures in the log on boot would show up as:
```
psmouse serio1: synaptics: Trying to set up SMBus access
[122] i2c_i801:i801_check_post:437: i801_smbus 0000:00:1f.3: No response
psmouse serio1: synaptics: SMbus companion is not ready yet
```

Experimentation on the Lenovo T440p showed that a delay of 7-12ms on
resume allowed the companion to respond.

The 30ms delay in this patch was chosen based on the linux-input message:
Link: https://lore.kernel.org/all/BYAPR03MB47572F2C65E52ED673238D41B2439@BYAPR03MB4757.namprd03.prod.outlook.com/

Signed-off-by: default avatarJeffery Miller <jefferymiller@google.com>
Link: https://lore.kernel.org/r/20230726025256.81174-1-jefferymiller@google.com
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      92e24e0e
    • Nathan Chancellor's avatar
      Input: mcs-touchkey - fix uninitialized use of error in mcs_touchkey_probe() · 8362bf82
      Nathan Chancellor authored 
      Clang warns (or errors with CONFIG_WERROR=y):

  drivers/input/keyboard/mcs_touchkey.c:149:49: error: variable 'error' is uninitialized when used here [-Werror,-Wuninitialized]
    149 |                 dev_err(&client->dev, "i2c read error[%d]\n", error);
        |                                                               ^~~~~
  include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err'
    144 |         dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
        |                                                                        ^~~~~~~~~~~
  include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
    110 |                 _p_func(dev, fmt, ##__VA_ARGS__);                       \
        |                                     ^~~~~~~~~~~
  drivers/input/keyboard/mcs_touchkey.c:110:11: note: initialize the variable 'error' to silence this warning
    110 |         int error;
        |                  ^
        |                   = 0
  1 error generated.

A refactoring updated the error handling in this block but did not
update the dev_err() call to use fw_ver instead of error. Do so now to
fix the warning and avoid printing uninitialized memory.

Closes: https://github.com/ClangBuiltLinux/linux/issues/1893
Fixes: e175eae1

 ("Input: mcs-touchkey - convert to use devm_* api")
Signed-off-by: default avatarNathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230725-mcs_touchkey-fix-wuninitialized-v1-1-615db39af51c@kernel.org
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      8362bf82
  5. Jul 21, 2023
  7. Jul 19, 2023
    • Artur Weber's avatar
      Input: mms114 - add support for touch keys · bf93349b
      Artur Weber authored 
      

MELFAS MMS114 and similar touchscreens have support for touch keys.
Enable support of them in the driver. The keycodes to emit can be
controlled by the linux,keycodes DT property.

Sidenote - the MAX_TOUCHKEYS value is set to 15, as that's the
maximum value that the ID field can contain. I don't have access
to any datasheets that could confirm or deny whether this is accurate.

Most downstream drivers I've been able to find only use up to 2 keys
(though I did find a driver that mentioned up to 4, but only 2 were
used). They don't have any checks for a maximum keycode value, it is
just extracted from the ID bits (0xf mask).

The drivers I've been able to find also don't use touch ID 0; I assume
that it is never used, so the keycodes provided in the DT start from
touch ID 1. I suppose this is in-line with the regular behavior
for touch IDs in touchscreen events, as there the provided touch ID
is always lowered by 1, which would cause an overflow if it was 0...
Just in case, we quietly return if the touch ID is set to 0 here.

The implementation of the linux,keycodes property handling code was
adapted from the msg2638 driver.

Signed-off-by: default avatarArtur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/20230714100424.29798-3-aweber.kernel@gmail.com
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      bf93349b
    • Artur Weber's avatar
      dt-bindings: mms114: Add linux,keycodes property for touch keys · 21c133be
      Artur Weber authored 
      

MELFAS MMS114 and similar touchscreens have support for touch keys.
Add the linux,keycodes property which can be used to set up the
keycodes for the touch keys.

Acked-by: default avatarConor Dooley <conor.dooley@microchip.com>
Signed-off-by: default avatarArtur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/20230714100424.29798-2-aweber.kernel@gmail.com
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      21c133be
    • Samuel Holland's avatar
      Input: da9063 - add wakeup support · d7781232
      Samuel Holland authored 
      

Mark the IRQ as a wake IRQ so it will be enabled during system suspend.

Signed-off-by: default avatarSamuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20230717192004.1304287-1-samuel.holland@sifive.com
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      d7781232
  9. Jul 18, 2023
  11. Jul 14, 2023
  13. Jul 13, 2023
  15. Jul 11, 2023