[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a
pipe commit can cause underflow.

[HOW]
Defer all DPP adjustment requests till optimized_required is false.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Currently, it is likely that we will read the relevant LTTPR caps after
link training has completed (which can cause garbage data to be read),
however according to the DP 2.0 spec that should be done before link
training has commenced. So, instead of reading the registers on demand,
use the values provided to us by DC.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

enable athub cg on gc 11.0.3

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 9aa15370.

This is fixed now so we can re-enable S/G display on DCN
3.1.4.

Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 1a65327a.

This should be resolved so we can re-enable this. Also,
the AGP apeture was bring programmed to 0 on MMHUB 3.0.1
since agp_start and end were not being set.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Take into account whether or not the AGP aperture is
enabled or not when calculating the system aperture.

Fixes white screens with DCN 3.1.4.

Based on a patch from Yifan Zhang <yifan1.zhang@amd.com>

Cc: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2352


Cc: roman.li@amd.com
Cc: yifan1.zhang@amd.com
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2352


Cc: roman.li@amd.com
Cc: yifan1.zhang@amd.com
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Accessing GRBM_GFX_CNTL in full access time has risk when VF is doing MMIO attacking.
Therefore, VF writing GRBM_GFX_CNTL are blocked by L1 Policy.
For RLCG interface, RLCG use SCRATCH_REG2 which is copied from GRBM_GFX_CNTL.

[How]
Remove writing GRBM_GFX_CNTL in amdgpu_virt_rlcg_reg_rw.

v2:
Remove directly writing GRBM_GFX_INDEX in amdgpu_virt_rlcg_reg_rw
as RLCG interface no need to use it.

Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We allow sending PSP messages LOAD_ASD and UNLOAD_TA without
acquiring a lock in drm_dev_enter during driver unload
because we must call drm_dev_unplug as the beginning
of unload driver sequence.
Added WARNING if other PSP messages are sent without a lock.
After this commit, the following commands would work
 -sudo modprobe -r amdgpu
 -sudo modprobe amdgpu

Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This is a very trivial code clean-up related to commit 5468c36d
("drm/amd/display: Filter Invalid 420 Modes for HDMI TMDS"). This commit
added a validation on driver probe to prevent invalid TMDS modes, but one
of the fake properties (swizzle) ended-up causing a warning on driver
probe; was reported here: https://gitlab.freedesktop.org/drm/amd/-/issues/2264

.

It was fixed by commit a1cbe691 ("drm/amd/display: patch cases with
unknown plane state to prevent warning"), but the validation code had
a double variable assignment, which we hereby remove. Also, the fix relies
in the dcn2{0,1}patch_unknown_plane_state() callbacks, so while at it we
took the opportunity to perform a small code clean-up in such routines.

Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Mark Broadworth <mark.broadworth@amd.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Sung Joon Kim <Sungjoon.Kim@amd.com>
Cc: Swapnil Patel <Swapnil.Patel@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

cppcheck reports
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1403:76: style:
  Expression is always true because 'else if' condition is opposite to previous condition at line 1396. [multiCondition]
   } else if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type == SUBVP_PHANTOM) {
                                                                           ^
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1396:69: note: first condition
   if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type != SUBVP_PHANTOM) {
                                                                    ^
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1403:76: note: else if condition is opposite to first condition
   } else if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type == SUBVP_PHANTOM) {

It is not necessary to explicitly the check != condition, an else is simplier.

Fixes: 238debca ("drm/amd/display: Use DML for MALL SS and Subvp allocation calculations")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

checkpatch reports
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2902:13: style:
  Expression is always true because 'else if' condition is opposite to previous condition at line 2895. [multiCondition]
 } else if (blank) {
            ^
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2895:6: note: first condition
 if (!blank) {
     ^
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2902:13: note: else if condition is opposite to first condition
 } else if (blank) {

It is not necessary to explicitly the check != condition, an else is simplier.

Fixes: aa5a5777 ("drm/amd/display: Vari-bright looks disabled near end of MM14")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

opp.h is included more than once.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Spell it as "broadcast".

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

There could be boards with DCN listed in IP discovery, but no
display hardware actually wired up.  In this case the vbios
display table will not be populated.  Detect this case and
skip loading DM when we detect it.

v2: Mark DCN as harvested as well so other display checks
elsewhere in the driver are handled properly.

Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

These sysfs nodes are tested supported, so enable them.

Signed-off-by: Yiqing Yao <yiqing.yao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

A mistake has been made on some boards with NBIO 4.3.0 where some
NBIO registers aren't properly set by the hardware.

Ensure that they're set during initialization.

Cc: Natikar Basavaraj <Basavaraj.Natikar@amd.com>
Tested-by: Satyanarayana ReddyTVN <Satyanarayana.ReddyTVN@amd.com>
Tested-by: Rutvij Gajjar <Rutvij.Gajjar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable HDP clock gating control for gfx 11.0.3.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

PMFW will handle the features disablement properly for gpu reset case,
driver involvement may cause some unexpected issues.

Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This version brings along following fixes:
- fix linux dp link lost handled only one time
- Reset DMUB mailbox SW state after HW reset
- Unassign does_plane_fit_in_mall function from dcn3.2
- Add Function delaration in dc_link
- Fix crash when connecting 2 displays with video playback
- Adjust downscaling limits for dcn314
- fix FCLK pstate change underflow
- Fix only one ABM pipe enabled under ODM combined case
- Add missing brackets in calculation
- Correct bw_params population
- Fix Z8 support configurations
- Add Debug Log for MST and PCON
- fix MALL size hardcoded for DCN321
- add rc_params_override option in dc_dsc_config
- Enable Freesync over PCon

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
linux amdgpu defer handle link lost irq. dm add handle
request to irq work queue for the first irq of link lost.
if link training fails for link lost handle, link will not
be enabled anymore.

[How]
allow adding handle request of link lost to work queue
before running dp link training for link lost.

Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Otherwise we can be out of sync with what's in the hardware, leading
to us rerunning every command that's presently in the ringbuffer.

[How]
Reset software state for the mailboxes in hw_reset callback.
This is already done as part of the mailbox init in hw_init, but we
do need to remember to reset the last cached wptr value as well here.

Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
The hwss function does_plane_fit_in_mall not applicable to dcn3.2 asics.
Using it with dcn3.2 can result in undefined behaviour.

[How]
Assign the function pointer to NULL.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
Housekeeping cleaning and adding declaration for
function to be called from DM layer

[HOW]
Adding public functions to dc_link.h

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 7cf5ceb3.

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Lower max_downscale_ratio and ARGB888 downscale factor
to prevent cases where underflow may occur on dcn314

[How]
Set max_downscale_ratio to 400 and ARGB downscale factor
to 250 for dcn314

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Currently we set FCLK p-state change
watermark calculated based on dummy
p-state latency when UCLK p-state is
not supported

[How]
Calculate FCLK p-state change watermark
based on on FCLK pstate change latency
in case UCLK p-state is not supported

Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
ABM set pipe before updating ODM status,
it leads to incorrect ABM pipe setting when enabling ODM combine.

[How]
Call ABM set pipe flow after ODM status update in program pipe sequence.

Reviewed-by: Chun-Liang Chang <Chun-Liang.Chang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Brackets missing in the calculation for MIN_DST_Y_NEXT_START

[How]
Add missing brackets for this calculation

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Underflow observed during P010 video playback on
dcn314 due to incorrectly populated bw_params

[How]
Populate fclk, memclk and voltage in bw_params with
values from max pstate rather than min pstate

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
It's not supported in multi-display, but it is supported in 2nd eDP
screen only.

[How]
Remove multi display support, restrict number of planes for all
z-states support, but still allow Z8 if we're not using PWRSEQ0.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add log for MST/PCON specific use case:
1. If DP1.2 hub where gives reduced link bw and no dsc support.
2. If less than 4-lane configuration where gives reduced bw.
3. If FRL PCON enabled for asic.
4. Track MST sink count.

Reviewed-by: Hersen Wu <Hersenxs.Wu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
MALL size available can vary for different SKUs
MALL size was still hardcoded for DCN321

[How]
Remove hardcoding MALL size for DCN321

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
Current RC params are based on VESA recommended configurations.
Some DSC sink may prefer non standard rc params values due to
hardware limitations. To support those DSC sink we will allow DM to
optionally pass rc_params_ovrd in dc_dsc_config so DC will override
the default VESA recommended configurations.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
Enable Freesync over PCon on Linux environment.

[how]
Adding Freesync over PCon support in amdgpu_dm
- Read DPCD for Freesync over PCon capabilitiy
- Add whitelist for compatible branch devices

Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

SQ_WAVE_INST_DW0 isn't present on gfx11 compared to gfx10, so update
wave data type to signify a difference.

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We guard the suspend entry code from running unless we have proper
BIOS support for either S3 mode or s0ix mode.

If a user's system doesn't support either of these modes the kernel
still does offer s2idle in `/sys/power/mem_sleep` so there is an
expectation from users that it works even if the power consumption
remains very high.

Rafael Ávila de Espíndola reports that a system of his has a
non-functional graphics stack after resuming.  That system doesn't
support S3 and the FADT doesn't indicate support for low power idle.

Through some experimentation it was concluded that even without the
hardware s0i3 support provided by the amd_pmc driver the power
consumption over suspend is decreased by running amdgpu's s0ix
suspend routine.

The numbers over suspend showed:
* No patch: 9.2W
* Skip amdgpu suspend entirely: 10.5W
* Run amdgpu s0ix routine: 7.7W

As this does improve the power, remove some of the guard rails in
`amdgpu_acpi.c` for only running s0ix suspend routines in the right
circumstances.

However if this turns out to cause regressions for anyone, we should
revert this change and instead opt for skipping suspend/resume routines
entirely or try to fix the underlying behavior that makes graphics fail
after resume without underlying platform support.

Reported-by: Rafael Ávila de Espíndola <rafael@espindo.la>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2364


Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit fac53471.
The following change: move the drm_dev_unplug call after
amdgpu_driver_unload_kms in amdgpu_pci_remove. The reason is
the following: amdgpu_pci_remove calls drm_dev_unregister
and it should be called first to ensure userspace can't access the
device instance anymore. If we call drm_dev_unplug after
amdgpu_driver_unload_kms then we observe IGT PCI software unplug
test failure (kernel hung) for all ASICs. This is how this
regression was found.

After this revert, the following commands do work not, but it would
be fixed in the next commit:
 - sudo modprobe -r amdgpu
 - sudo modprobe amdgpu

Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Due to holidays we started -next with more -fixes in-flight than
usual, and people have been asking where they are. Backmerge to get
things better in sync.

Conflicts:
- Tiny conflict in drm_fbdev_generic.c between variable rename and
  missing error handling that got added.
- Conflict in drm_fb_helper.c between the added call to vgaswitcheroo
  in drm_fb_helper_single_fb_probe and a refactor patch that extracted
  lots of helpers and incidentally removed the dev local variable.
  Readd it to make things compile.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>