'pci_set_dma_mask()' + 'pci_set_consistent_dma_mask()' can be replaced by
an equivalent 'dma_set_mask_and_coherent()' which is much less verbose.

While at it, fix a typo (s/confiugration/configuration)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201129125434.1462638-1-christophe.jaillet@wanadoo.fr


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

Replace opencoded alloc and copy with vmemdup_user()

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1605057288-60400-1-git-send-email-tiantao6@hisilicon.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>

Let's add a safe mechanism to unplug memory, avoiding long/endless loops
when trying to offline memory - similar to in SBM.

Fake-offline all memory (via alloc_contig_range()) before trying to
offline+remove it. Use this mode as default, but allow to enable the other
mode explicitly (which could give better memory hotunplug guarantees in
some environments).

The "unsafe" mode can be enabled e.g., via virtio_mem.bbm_safe_unplug=0
on the cmdline.

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-30-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Let's try to unplug completely offline big blocks first. Then, (if
enabled via unplug_offline) try to offline and remove whole big blocks.

No locking necessary - we can deal with concurrent onlining/offlining
just fine.

Note1: This is sub-optimal and might be dangerous in some environments: we
could end up in an infinite loop when offlining (e.g., long-term pinnings),
similar as with DIMMs. We'll introduce safe memory hotunplug via
fake-offlining next, and use this basic mode only when explicitly enabled.

Note2: Without ZONE_MOVABLE, memory unplug will be extremely unreliable
with bigger block sizes.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-29-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-mem soon wants to use offline_and_remove_memory() memory that
exceeds a single Linux memory block (memory_block_size_bytes()). Let's
remove that restriction.

Let's remember the old state and try to restore that if anything goes
wrong. While re-onlining can, in general, fail, it's highly unlikely to
happen (usually only when a notifier fails to allocate memory, and these
are rather rare).

This will be used by virtio-mem to offline+remove memory ranges that are
bigger than a single memory block - for example, with a device block
size of 1 GiB (e.g., gigantic pages in the hypervisor) and a Linux memory
block size of 128MB.

While we could compress the state into 2 bit, using 8 bit is much
easier.

This handling is similar, but different to acpi_scan_try_to_offline():

a) We don't try to offline twice. I am not sure if this CONFIG_MEMCG
optimization is still relevant - it should only apply to ZONE_NORMAL
(where we have no guarantees). If relevant, we can always add it.

b) acpi_scan_try_to_offline() simply onlines all memory in case
something goes wrong. It doesn't restore previous online type. Let's do
that, so we won't overwrite what e.g., user space configured.

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-28-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>

Let's allow to force BBM, even if subblocks would be possible. Take care
of properly calculating the first big block id, because the start
address might no longer be aligned to the big block size.

Also, allow to manually configure the size of Big Blocks.

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-27-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Currently, we do not support device block sizes that exceed the Linux
memory block size. For example, having a device block size of 1 GiB (e.g.,
gigantic pages in the hypervisor) won't work with 128 MiB Linux memory
blocks.

Let's implement Big Block Mode (BBM), whereby we add/remove at least
one Linux memory block at a time. With a 1 GiB device block size, a Big
Block (BB) will cover 8 Linux memory blocks.

We'll keep registering the online_page_callback machinery, it will be used
for safe memory hotunplug in BBM next.

Note: BBM is properly prepared for variable-sized Linux memory
blocks that we might see in the future. So we won't care how many Linux
memory blocks a big block actually spans, and how the memory notifier is
called.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-26-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Let's use wrappers for the low-level functions that dev_dbg/dev_warn
and work on addr + size, such that we can reuse them for adding/removing
in other granularity.

We only warn when adding memory failed, because that's something to pay
attention to. We won't warn when removing failed, we'll reuse that in
racy context soon (and we do have proper BUG_ON() statements in the
current cases where it must never happen).

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-25-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Let's rename accordingly.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-24-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Let's rename them accordingly. virtio_mem_plug_request() and
virtio_mem_unplug_request() will be handled separately.

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-23-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Let's move first_mb_id/next_mb_id/last_usable_mb_id accordingly.

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-22-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Let's rename to "sbs_per_mb" and "sb_size" and move accordingly.

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-21-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Let's rename and move accordingly. While at it, rename sb_bitmap to
"sb_states".

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-20-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

let's use a new "sbm" sub-struct to hold SBM-specific state and rename +
move applicable definitions, functions, and variables (related to
memory block states).

While at it:
- Drop the "_STATE" part from memory block states
- Rename "nb_mb_state" to "mb_count"
- "set_mb_state" / "get_mb_state" vs. "mb_set_state" / "mb_get_state"
- Don't use lengthy "enum virtio_mem_smb_mb_state", simply use "uint8_t"

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-19-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Let's add some documentation for the current mode - Sub Block Mode (SBM) -
to prepare for a new mode - Big Block Mode (BBM).

Follow-up patches will properly factor out the existing Sub Block Mode
(SBM) and implement Big Block Mode (BBM).

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-18-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

We don't want to add too much memory when it's not getting onlined
immediately, to avoid running OOM. Generalize the handling, to avoid
making use of memory block states. Use a threshold of 1 GiB for now.

Properly adjust the offline size when adding/removing memory. As we are
not always protected by a lock when touching the offline size, use an
atomic64_t. We don't care about races (e.g., someone offlining memory
while we are adding more), only about consistent values.

(1 GiB needs a memmap of ~16MiB - which sounds reasonable even for
 setups with little boot memory and (possibly) one virtio-mem device per
 node)

We don't want to retrigger when onlining is caused immediately by our
action (e.g., adding memory which immediately gets onlined), so use a
flag to indicate if the workqueue is active and use that as an
indicator whether to trigger a retry. This will also be especially relevant
for Big Block Mode (BBM), whereby we might re-online memory in case
offlining of another memory block failed.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-17-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Let's trigger from offlining code only when we're not allowed to unplug
online memory. Handle the other case (memmap possibly freeing up another
memory block) when actually removing memory. We now also properly handle
the case when removing already offline memory blocks via
virtio_mem_mb_remove(). When removing via virtio_mem_remove(), when
unloading the driver, virtio_mem_retry() is a NOP and safe to use.

While at it, move retry handling when offlining out of
virtio_mem_notify_offline(), to share it with Big Block Mode (BBM)
soon.

This is a preparation for Big Block Mode (BBM), whereby we can see some
temporary offlining of memory blocks without actually making progress.
Imagine you have a Big Block that spans to Linux memory blocks. Assume
the first Linux memory blocks has no unmovable data on it. When we would
call offline_and_remove_memory() on the big block, we would
	1. Try to offline the first block. Works, notifiers triggered.
	   virtio_mem_retry() called.
	2. Try to offline the second block. Does not work.
	3. Re-online first block.
	4. Exit to main loop, exit workqueue.
	5. Retry immediately (due to virtio_mem_retry()), go to 1.
The result are endless retries.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-16-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

No longer used, let's drop it.

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-15-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Avoid using memory block ids. While at it, use uint64_t for
address/size.

This is a preparation for Big Block Mode (BBM).

Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-14-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Avoid using memory block ids. Rename it to virtio_mem_contains_range().

This is a preparation for Big Block Mode (BBM).

Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-13-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Let's check by traversing busy system RAM resources instead, to avoid
relying on memory block states.

Don't use walk_system_ram_range(), as that works on pages and we want to
use the bare addresses we have easily at hand.

This is a preparation for Big Block Mode (BBM), which won't have memory
block states.

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-12-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

ZONE_MOVABLE is supposed to give some guarantees, yet,
alloc_contig_range() isn't prepared to properly deal with some racy
cases properly (e.g., temporary page pinning when exiting processed, PCP).

Retry 5 times for now. There is certainly room for improvement in the
future.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-11-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Let's factor out the core pieces and place the implementation next to
virtio_mem_fake_offline(). We'll reuse this functionality soon.

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-10-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

... which now matches virtio_mem_fake_online(). We'll reuse this
functionality soon.

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-9-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Let's move the existing dev_dbg() into the functions, print if something
went wrong, and also print for virtio_mem_send_unplug_all_request().

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-8-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

The calculation is already complicated enough, let's limit it to one
location.

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-7-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

No harm done, but let's be consistent.

Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-6-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

We can drop rc2, we don't actually need the value.

Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-5-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Let's use pageblock_nr_pages and MAX_ORDER_NR_PAGES instead where
possible to simplify.

Add a comment why we have that restriction for now.

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-4-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

We actually need one byte less (next_mb_id is exclusive, first_mb_id is
inclusive). While at it, compact the code.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-3-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Let's determine the target nid only once in case we have none specified -
usually, we'll end up with node 0 either way.

Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-2-david@redhat.com


Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 and membarrier fixes:

   - Correct a few problems in the x86 and the generic membarrier
     implementation. Small corrections for assumptions about visibility
     which have turned out not to be true.

   - Make the PAT bits for memory encryption correct vs 4K and 2M/1G
     page table entries as they are at a different location.

   - Fix a concurrency issue in the the local bandwidth readout of
     resource control leading to incorrect values

   - Fix the ordering of allocating a vector for an interrupt. The order
     missed to respect the provided cpumask when the first attempt of
     allocating node local in the mask fails. It then tries the node
     instead of trying the full provided mask first. This leads to
     erroneous error messages and breaking the (user) supplied affinity
     request. Reorder it.

   - Make the INT3 padding detection in optprobe work correctly"

* tag 'x86-urgent-2020-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Fix optprobe to detect INT3 padding correctly
  x86/apic/vector: Fix ordering in vector assignment
  x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabled
  x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP
  membarrier: Execute SYNC_CORE on the calling thread
  membarrier: Explicitly sync remote cores when SYNC_CORE is requested
  membarrier: Add an actual barrier before rseq_preempt()
  x86/membarrier: Get rid of a dubious optimization

Pull block fixes from Jens Axboe:
 "This should be it for 5.10.

  Mike and Song looked into the warning case, and thankfully it appears
  the fix was pretty trivial - we can just change the md device chunk
  type to unsigned int to get rid of it. They cannot currently be < 0,
  and nobody is checking for that either.

  We're reverting the discard changes as the corruption reports came in
  very late, and there's just no time to attempt to deal with it at this
  point. Reverting the changes in question is the right call for 5.10"

* tag 'block-5.10-2020-12-12' of git://git.kernel.dk/linux-block:
  md: change mddev 'chunk_sectors' from int to unsigned
  Revert "md: add md_submit_discard_bio() for submitting discard bio"
  Revert "md/raid10: extend r10bio devs to raid disks"
  Revert "md/raid10: pull codes that wait for blocked dev into one function"
  Revert "md/raid10: improve raid10 discard request"
  Revert "md/raid10: improve discard request for far layout"
  Revert "dm raid: remove unnecessary discard limits for raid10"

Pull SCSI fixes from James Bottomley:
 "Five small fixes.  Four in drivers:

   - hisi_sas: fix internal queue timeout

   - be2iscsi: revert a prior fix causing problems

   - bnx2i: add missing dependency

   - storvsc: late arriving revert of a problem fix

  and one in the core.

  The core one is a minor change to stop paying attention to the busy
  count when returning out of resources because there's a race window
  where the queue might not restart due to missing returning I/O"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  Revert "scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()"
  scsi: hisi_sas: Select a suitable queue for internal I/Os
  scsi: core: Fix race between handling STS_RESOURCE and completion
  scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()"
  scsi: bnx2i: Requires MMU

Pull i2c fix from Wolfram Sang:
 "Bugfix for the AT24 EEPROM driver"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  misc: eeprom: at24: fix NVMEM name with custom AT24 device name

Pull kvm fixes from Paolo Bonzini:
 "Bugfixes for ARM, x86 and tools"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  tools/kvm_stat: Exempt time-based counters
  KVM: mmu: Fix SPTE encoding of MMIO generation upper half
  kvm: x86/mmu: Use cpuid to determine max gfn
  kvm: svm: de-allocate svm_cpu_data for all cpus in svm_cpu_uninit()
  selftests: kvm/set_memory_region_test: Fix race in move region test
  KVM: arm64: Add usage of stage 2 fault lookup level in user_mem_abort()
  KVM: arm64: Fix handling of merging tables into a block entry
  KVM: arm64: Fix memory leak on stage2 update of a valid PTE

Pull xen fixes from Juergen Gross:
 "A short series fixing a regression introduced in 5.9 for running as
  Xen dom0 on a system with NVMe backed storage"

* tag 'for-linus-5.10c-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: don't use page->lru for ZONE_DEVICE memory
  xen: add helpers for caching grant mapping pages

Pull RISC-V fix from Palmer Dabbelt:
 "Just one fix. It's nothing critical, just a randconfig that wasn't
  building. That said, it does seem pretty safe and is technically a
  regression so I'm sending it along for 5.10:

   - define get_cycles64() all the time, as it's used by most
     configurations"

* tag 'riscv-for-linus-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Define get_cycles64() regardless of M-mode

Pull io_uring fixes from Jens Axboe:
 "Two fixes in here, fixing issues introduced in this merge window"

* tag 'io_uring-5.10-2020-12-11' of git://git.kernel.dk/linux-block:
  io_uring: fix file leak on error path of io ctx creation
  io_uring: fix mis-seting personality's creds