Skip to content
  1. Nov 07, 2014
  3. Oct 20, 2014
  5. Oct 16, 2014
  7. Sep 25, 2014
  9. Sep 22, 2014
  11. Sep 18, 2014
  13. Sep 17, 2014
  15. Sep 16, 2014
  17. Sep 14, 2014
    • Andrew Lunn's avatar
      ARM: Kirkwood: Fix DT based DSA. · 4f5e01e9
      Andrew Lunn authored 
      

During the conversion of boards to use DT to instantiate Distributed
Switch Architecture, nobody volunteered to test. As to be expected,
the conversion was flawed. Testers and access to hardware has now
become available, and this patch hopefully fixes the problems.

dsa,mii-bus must be a phandle to the top level mdio node, not the port
specific subnode of the mdio device.

dsa,ethernet must be a phandle to the port subnode within the ethernet
DT node, not the ethernet node.

Don't pinctrl hog the card detect gpio for mvsdio.

Rename the .dts files to make it clearer which file is for the Z0
stepping and which for the A0 or later stepping.

Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Cc: seugene@marvell.com
Tested-by: default avatarEugene Sanivsky <seugene@marvell.com>
Fixes: e2eaa339: ("ARM: Kirkwood: convert rd88f6281-setup.c to DT.")
Fixes: e7c8f380: ("ARM: kirkwood: Convert mv88f6281gtw_ge switch setup to DT")
Cc: <stable@vger.kernel.org> #v3.15+
Link: https://lkml.kernel.org/r/1409592941-22244-1-git-send-email-andrew@lunn.ch


Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
      4f5e01e9
  19. Sep 12, 2014
  21. Sep 09, 2014
  23. Sep 06, 2014
    • Dylan Reid's avatar
      ARM: tegra: add Acer Chromebook 13 device tree · eb481f9a
      Dylan Reid authored 
      

The Acer Chromebook 13, codenamed Big, contains an NVIDIA tegra124
processor and is similar to the Venice2 reference platform.

The keyboard, USB 2, audio, sdcard and emmc have been tested
and work on the 1366x768 models. The Full HD models haven't been
tested yet.

WiFi does not yet work, it needs at least some PMIC changes to enable
the 32k clock.

The elan trackpad is not yet functional but hopefully will be soon as
there are patches under review.

There is also an issue on reboot because the TPM isn't reset.  It will
cause the stock firmware to enter recovery mode.  This can be worked
around by an EC-reset, press the refresh and power keys at the same
time.

Signed-off-by: default avatarDylan Reid <dgreid@chromium.org>
Signed-off-by: default avatarStephen Warren <swarren@nvidia.com>
      eb481f9a
  25. Sep 04, 2014
  27. Sep 03, 2014
  29. Sep 02, 2014
  31. Aug 28, 2014
  33. Aug 22, 2014
  35. Aug 19, 2014
  37. Jul 31, 2014
  39. Jul 30, 2014
  41. Jul 28, 2014
  43. Jul 26, 2014
  45. Jul 25, 2014
  47. Jul 19, 2014
  49. Jul 18, 2014
    • Robert Nelson's avatar
      ARM: dts: add initial Rex Basic board support · 417d65f6
      Robert Nelson authored 
      

Add initial Rex Pro i.mx6dl board support. Ethernet, UART, USB, I2C, SPI, HDMI,
Audio, and SDHC cards are working.  Currently no mainline u-boot, so boot with
cat zImage imx6dl-rex-basic.dtb > zImage.dtb, then using mkimage create uImage

Signed-off-by: default avatarRobert Nelson <robertcnelson@gmail.com>
Signed-off-by: default avatarShawn Guo <shawn.guo@freescale.com>
      417d65f6
    • Robert Nelson's avatar
      ARM: dts: add initial Rex Pro board support · e2047e33
      Robert Nelson authored 
      

Add initial Rex Pro i.mx6q board support. Ethernet, UART, USB, I2C, SPI, HDMI,
Audio, and SDHC cards are working.  Currently no mainline u-boot, so boot with
cat zImage imx6q-rex-pro.dtb > zImage.dtb, then using mkimage create uImage

Signed-off-by: default avatarRobert Nelson <robertcnelson@gmail.com>
Signed-off-by: default avatarShawn Guo <shawn.guo@freescale.com>
      e2047e33
    • George Joseph's avatar
      ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. · 8536239e
      George Joseph authored 
      

The rev C1 Wandboard uses the Broadcom 4330 for WiFi and Bluetooth instead of
the 4329.  This changes the PADS assigned for the control lines.  Another
side effect of the change is that on the rev C1 board, usdhc driver can't
detect the chip presence correctly so usdhc2 now needs its 'non-removeable'
property removed.

So that rev B1 and earlier can continue to work, this patch splits the
board-specific definitions from imx6qdl-wandboard.dtsi into
imx6qdl-wandboard-revb1.dtsi and imx6qdl-wandboard-revc1.dtsi.  The new files
include the original base imx6qdl-wandboard.dtsi which retains the common
definitions.

The existing imx6dl-wandboard.dts includes imx6qdl-wandboard-revc1.dtsi and
imx6dl-wandboard-revb1.dts (new) includes imx6qdl-wandboard-revb1.dtsi.
This makes the rev C1 board the new default.  The same pattern is used for
imx6q-wandboard.dts.

So, from U-Boot on a WB-Quad you use imxq-wandboard-revb1.dtb for the older B1
board and imxq-wandboard.dtb for the current rev C1 board.

Signed-off-by: default avatarGeorge Joseph <george.joseph@fairview5.com>
Signed-off-by: default avatarShawn Guo <shawn.guo@freescale.com>
      8536239e
    • Heiko Schocher's avatar
      ARM: dts: imx6: add aristainetos board support · c64b874f
      Heiko Schocher authored 
      

This patch add support for the imx6dl based aristainetos board
with following configuration:

CPU:   Freescale i.MX6DL rev1.1 at 792 MHz
DRAM:  1 GiB
NAND:  512 MiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB

As this board can used with 2 different display types, the
differences between them are extracted into 2 DTS files, and
the common settings are collected in a common file.

Signed-off-by: default avatarHeiko Schocher <hs@denx.de>
Signed-off-by: default avatarShawn Guo <shawn.guo@freescale.com>
      c64b874f