- Apr 06, 2017
-
-
Yuchung Cheng authored
Currently the reordering SNMP counters only increase if a connection sees a higher degree then it has previously seen. It ignores if the reordering degree is not greater than the default system threshold. This significantly under-counts the number of reordering events and falsely convey that reordering is rare on the network. This patch properly and faithfully records the number of reordering events detected by the TCP stack, just like the comment says "this exciting event is worth to be remembered". Note that even so TCP still under-estimate the actual reordering events because TCP requires TS options or certain packet sequences to detect reordering (i.e. ACKing never-retransmitted sequence in recovery or disordered state). Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuchung Cheng authored
The lost retransmit SNMP stat is under-counting retransmission that uses segment offloading. This patch fixes that so all retransmission related SNMP counters are consistent. Fixes: 10d3be56 ("tcp-tso: do not split TSO packets at retransmit time") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Apr 05, 2017
-
-
Xin Long authored
This patch is almost to revert commit 02f3d4ce ("sctp: Adjust PMTU updates to accomodate route invalidation."). As t->asoc can't be NULL in sctp_transport_update_pmtu, it could get sk from asoc, and no need to pass sk into that function. It is also to remove some duplicated codes from that function. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2017-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.11 iwlwifi * an RCU fix * a fix for a potential out-of-bounds access crash * a fix for IBSS which has been broken since DQA was enabled rtlwifi * fix scheduling while atomic regression brcmfmac * fix use-after-free bug found by KASAN ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sekhar Nori authored
TI's cpsw driver handles both OF and non-OF case for phy connect. Unfortunately of_phy_connect() returns NULL on error while phy_connect() returns ERR_PTR(). To handle this, cpsw_slave_open() overrides the return value from phy_connect() to make it NULL or error. This leaves a small window, where cpsw_adjust_link() may be invoked for a slave while slave->phy pointer is temporarily set to -ENODEV (or some other error) before it is finally set to NULL. _cpsw_adjust_link() only handles the NULL case, and an oops results when ERR_PTR() is seen by it. Note that cpsw_adjust_link() checks PHY status for each slave whenever it is invoked. It can so happen that even though phy_connect() for a given slave returns error, _cpsw_adjust_link() is still called for that slave because the link status of another slave changed. Fix this by using a temporary pointer to store return value of {of_}phy_connect() and do a one-time write to slave->phy. Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Reported-by:
Yan Liu <yan-liu@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
PPP pseudo-wire type is 7 (11 is L2TP_PWTYPE_IP). Fixes: f1f39f91 ("l2tp: auto load type modules") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Trival fix, rename HW_INTERRUT_ASSERT_SET_* to HW_INTERRUPT_ASSERT_SET_* Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
Take a reference on the sessions returned by l2tp_session_find_nth() (and rename it l2tp_session_get_nth() to reflect this change), so that caller is assured that the session isn't going to disappear while processing it. For procfs and debugfs handlers, the session is held in the .start() callback and dropped in .show(). Given that pppol2tp_seq_session_show() dereferences the associated PPPoL2TP socket and that l2tp_dfs_seq_session_show() might call pppol2tp_show(), we also need to call the session's .ref() callback to prevent the socket from going away from under us. Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Fixes: 0ad66140 ("l2tp: Add debugfs files for dumping l2tp debug info") Fixes: 309795f4 ("l2tp: Add netlink control API for L2TP") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Apr 04, 2017
-
-
Marcelo Ricardo Leitner authored
Markus Trippelsdorf reported that after commit dcb17d22 ("tcp: warn on bogus MSS and try to amend it") the kernel started logging the warning for a NIC driver that doesn't even support GRO. It was diagnosed that it was possibly caused on connections that were using TCP Timestamps but some packets lacked the Timestamps option. As we reduce rcv_mss when timestamps are used, the lack of them would cause the packets to be bigger than expected, although this is a valid case. As this warning is more as a hint, getting a clean-cut on the threshold is probably not worth the execution time spent on it. This patch thus alleviates the false-positives with 2 quick checks: by accounting for the entire TCP option space and also checking against the interface MTU if it's available. These changes, specially the MTU one, might mask some real positives, though if they are really happening, it's possible that sooner or later it will be triggered anyway. Reported-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
This patch is to move sctp_transport_dst_check into sctp_packet_config from sctp_packet_transmit and add pathmtu check in sctp_packet_config. With this fix, sctp can update dst or pathmtu before appending chunks, which can void dropping packets in sctp_packet_transmit when dst is obsolete or dst's mtu is changed. This patch is also to improve some other codes in sctp_packet_config. It updates packet max_size with gso_max_size, checks for dst and pathmtu, and appends ecne chunk only when packet is empty and asoc is not NULL. It makes sctp flush work better, as we only need to set up them once for one flush schedule. It's also safe, since asoc is NULL only when the packet is created by sctp_ootb_pkt_new in which it just gets the new dst, no need to do more things for it other than set packet with transport's pathmtu. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Simon Horman authored
The last argument to __skb_header_pointer() should be a buffer large enough to store struct arphdr. This can be a pointer to a struct arphdr structure. The code was previously using a pointer to a pointer to struct arphdr. By my counting the storage available both before and after is 8 bytes on x86_64. Fixes: 55733350 ("flow disector: ARP support") Reported-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Apr 03, 2017
-
-
Grygorii Strashko authored
In case, if TX watchdog is fired some or all netdev TX queues will be stopped and as part of recovery it is required not only to drain and reinitailize CPSW TX channeles, but also wake up stoppted TX queues what doesn't happen now and netdevice will stop transmiting data until reopenned. Hence, add netif_tx_wake_all_queues() call in .ndo_tx_timeout() to complete recovery and restore TX path. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Apr 02, 2017
-
-
David S. Miller authored
Guillaume Nault says: ==================== l2tp: fix usage of l2tp_session_find() l2tp_session_find() doesn't take a reference on the session returned to its caller. Virtually all l2tp_session_find() users are racy, either because the session can disappear from under them or because they take a reference too late. This leads to bugs like 'use after free' or failure to notice duplicate session creations. In some cases, taking a reference on the session is not enough. The special callbacks .ref() and .deref() also have to be called in cases where the PPP pseudo-wire uses the socket associated with the session. Therefore, when looking up a session, we also have to pass a flag indicating if the .ref() callback has to be called. In the future, we probably could drop the .ref() and .deref() callbacks entirely by protecting the .sock field of struct pppol2tp_session with RCU, thus allowing it to be freed and set to NULL even if the L2TP session is still alive. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
Callers of l2tp_nl_session_find() need to hold a reference on the returned session since there's no guarantee that it isn't going to disappear from under them. Relying on the fact that no l2tp netlink message may be processed concurrently isn't enough: sessions can be deleted by other means (e.g. by closing the PPPOL2TP socket of a ppp pseudowire). l2tp_nl_cmd_session_delete() is a bit special: it runs a callback function that may require a previous call to session->ref(). In particular, for ppp pseudowires, the callback is l2tp_session_delete(), which then calls pppol2tp_session_close() and dereferences the PPPOL2TP socket. The socket might already be gone at the moment l2tp_session_delete() calls session->ref(), so we need to take a reference during the session lookup. So we need to pass the do_ref variable down to l2tp_session_get() and l2tp_session_get_by_ifname(). Since all callers have to be updated, l2tp_session_find_by_ifname() and l2tp_nl_session_find() are renamed to reflect their new behaviour. Fixes: 309795f4 ("l2tp: Add netlink control API for L2TP") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
l2tp_session_find() doesn't take any reference on the returned session. Therefore, the session may disappear while sending the notification. Use l2tp_session_get() instead and decrement session's refcount once the notification is sent. Fixes: 33f72e6f ("l2tp : multicast notification to the registered listeners") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
l2tp_session_create() relies on its caller for checking for duplicate sessions. This is racy since a session can be concurrently inserted after the caller's verification. Fix this by letting l2tp_session_create() verify sessions uniqueness upon insertion. Callers need to be adapted to check for l2tp_session_create()'s return code instead of calling l2tp_session_find(). pppol2tp_connect() is a bit special because it has to work on existing sessions (if they're not connected) or to create a new session if none is found. When acting on a preexisting session, a reference must be held or it could go away on us. So we have to use l2tp_session_get() instead of l2tp_session_find() and drop the reference before exiting. Fixes: d9e31d17 ("l2tp: Add L2TP ethernet pseudowire support") Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
Holding a reference on session is required before calling pppol2tp_session_ioctl(). The session could get freed while processing the ioctl otherwise. Since pppol2tp_session_ioctl() uses the session's socket, we also need to take a reference on it in l2tp_session_get(). Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
Taking a reference on sessions in l2tp_recv_common() is racy; this has to be done by the callers. To this end, a new function is required (l2tp_session_get()) to atomically lookup a session and take a reference on it. Callers then have to manually drop this reference. Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
Since sctp reconf was added in sctp, the real cnt of in/out stream have not been c.sinit_max_instreams and c.sinit_num_ostreams any more. This patch is to replace them with stream->in/outcnt. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2017-03-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Two fixes: * don't block netdev queues (indefinitely!) if mac80211 manages traffic queueing itself * check wiphy registration before checking for ops on resume, to avoid crash ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Daniel Borkmann says: ==================== BPF fixes on map_value_adj reg types This set adds two fixes for map_value_adj register type in the verifier and user space tests along with them for the BPF self test suite. For details, please see individual patches. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Add a couple of test cases, for example, probing for xadd on a spilled pointer to packet and map_value_adj register, various other map_value_adj tests including the unaligned load/store, and trying out pointer arithmetic on map_value_adj register itself. For the unaligned load/store, we need to figure out whether the architecture has efficient unaligned access and need to mark affected tests accordingly. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Currently, the verifier doesn't reject unaligned access for map_value_adj register types. Commit 48461135 ("bpf: allow access into map value arrays") added logic to check_ptr_alignment() extending it from PTR_TO_PACKET to also PTR_TO_MAP_VALUE_ADJ, but for PTR_TO_MAP_VALUE_ADJ no enforcement is in place, because reg->id for PTR_TO_MAP_VALUE_ADJ reg types is never non-zero, meaning, we can cause BPF_H/_W/_DW-based unaligned access for architectures not supporting efficient unaligned access, and thus worst case could raise exceptions on some archs that are unable to correct the unaligned access or perform a different memory access to the actual requested one and such. i) Unaligned load with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x42533a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+11 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (61) r1 = *(u32 *)(r0 +0) 8: (35) if r1 >= 0xb goto pc+9 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=10 R10=fp 9: (07) r0 += 3 10: (79) r7 = *(u64 *)(r0 +0) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R10=fp 11: (79) r7 = *(u64 *)(r0 +2) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R7=inv R10=fp [...] ii) Unaligned store with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x4df16a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+19 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (07) r0 += 3 8: (7a) *(u64 *)(r0 +0) = 42 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 9: (7a) *(u64 *)(r0 +2) = 43 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 10: (7a) *(u64 *)(r0 -2) = 44 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp [...] For the PTR_TO_PACKET type, reg->id is initially zero when skb->data was fetched, it later receives a reg->id from env->id_gen generator once another register with UNKNOWN_VALUE type was added to it via check_packet_ptr_add(). The purpose of this reg->id is twofold: i) it is used in find_good_pkt_pointers() for setting the allowed access range for regs with PTR_TO_PACKET of same id once verifier matched on data/data_end tests, and ii) for check_ptr_alignment() to determine that when not having efficient unaligned access and register with UNKNOWN_VALUE was added to PTR_TO_PACKET, that we're only allowed to access the content bytewise due to unknown unalignment. reg->id was never intended for PTR_TO_MAP_VALUE{,_ADJ} types and thus is always zero, the only marking is in PTR_TO_MAP_VALUE_OR_NULL that was added after 48461135 via 57a09bf0 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers"). Above tests will fail for non-root environment due to prohibited pointer arithmetic. The fix splits register-type specific checks into their own helper instead of keeping them combined, so we don't run into a similar issue in future once we extend check_ptr_alignment() further and forget to add reg->type checks for some of the checks. Fixes: 48461135 ("bpf: allow access into map value arrays") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Josef Bacik <jbacik@fb.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
While looking into map_value_adj, I noticed that alu operations directly on the map_value() resp. map_value_adj() register (any alu operation on a map_value() register will turn it into a map_value_adj() typed register) are not sufficiently protected against some of the operations. Two non-exhaustive examples are provided that the verifier needs to reject: i) BPF_AND on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0xbf842a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+2 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (57) r0 &= 8 8: (7a) *(u64 *)(r0 +0) = 22 R0=map_value_adj(ks=8,vs=48,id=0),min_value=0,max_value=8 R10=fp 9: (95) exit from 6 to 9: R0=inv,min_value=0,max_value=0 R10=fp 9: (95) exit processed 10 insns ii) BPF_ADD in 32 bit mode on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0xc24eee00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+2 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (04) (u32) r0 += (u32) 0 8: (7a) *(u64 *)(r0 +0) = 22 R0=map_value_adj(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 9: (95) exit from 6 to 9: R0=inv,min_value=0,max_value=0 R10=fp 9: (95) exit processed 10 insns Issue is, while min_value / max_value boundaries for the access are adjusted appropriately, we change the pointer value in a way that cannot be sufficiently tracked anymore from its origin. Operations like BPF_{AND,OR,DIV,MUL,etc} on a destination register that is PTR_TO_MAP_VALUE{,_ADJ} was probably unintended, in fact, all the test cases coming with 48461135 ("bpf: allow access into map value arrays") perform BPF_ADD only on the destination register that is PTR_TO_MAP_VALUE_ADJ. Only for UNKNOWN_VALUE register types such operations make sense, f.e. with unknown memory content fetched initially from a constant offset from the map value memory into a register. That register is then later tested against lower / upper bounds, so that the verifier can then do the tracking of min_value / max_value, and properly check once that UNKNOWN_VALUE register is added to the destination register with type PTR_TO_MAP_VALUE{,_ADJ}. This is also what the original use-case is solving. Note, tracking on what is being added is done through adjust_reg_min_max_vals() and later access to the map value enforced with these boundaries and the given offset from the insn through check_map_access_adj(). Tests will fail for non-root environment due to prohibited pointer arithmetic, in particular in check_alu_op(), we bail out on the is_pointer_value() check on the dst_reg (which is false in root case as we allow for pointer arithmetic via env->allow_ptr_leaks). Similarly to PTR_TO_PACKET, one way to fix it is to restrict the allowed operations on PTR_TO_MAP_VALUE{,_ADJ} registers to 64 bit mode BPF_ADD. The test_verifier suite runs fine after the patch and it also rejects mentioned test cases. Fixes: 48461135 ("bpf: allow access into map value arrays") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Josef Bacik <jbacik@fb.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
René Rebe authored
Without this the generic cdc_ether grabs the device, and does not really work. Signed-off-by:
René Rebe <rene@exactcode.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yi-Hung Wei authored
ovs_flow_key_update() is called when the flow key is invalid, and it is used to update and revalidate the flow key. Commit 329f45bc ("openvswitch: add mac_proto field to the flow key") introduces mac_proto field to flow key and use it to determine whether the flow key is valid. However, the commit does not update the code path in ovs_flow_key_update() to revalidate the flow key which may cause BUG_ON() on execute_recirc(). This patch addresses the aforementioned issue. Fixes: 329f45bc ("openvswitch: add mac_proto field to the flow key") Signed-off-by:
Yi-Hung Wei <yihung.wei@gmail.com> Acked-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mark Brown authored
This driver uses interfaces from linux/of.h and linux/property.h but relies on implict inclusion of those headers which means that changes in other headers could break the build, as happened in -next for arm today. Add a explicit includes. Signed-off-by:
Mark Brown <broonie@kernel.org> Acked-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daode Huang authored
The current code only supports DT to check SFP present. This patch adds ACPI support as well. Signed-off-by:
Daode Huang <huangdaode@hisilicon.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Mar 31, 2017
-
-
Suresh Reddy authored
Use cpu_to_le32() for link_config variable in set_logical_link_config command as this variable is of type u32. Signed-off-by:
Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
When sending a msg without asoc established, sctp will send INIT packet first and then enqueue chunks. Before receiving INIT_ACK, stream info is not yet alloced. But enqueuing chunks needs to access stream info, like out stream state and out stream cnt. This patch is to fix it by allocing out stream info when initializing an asoc, allocing in stream and re-allocing out stream when processing init. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrey Konovalov authored
When calculating po->tp_hdrlen + po->tp_reserve the result can overflow. Fix by checking that tp_reserve <= INT_MAX on assign. Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrey Konovalov authored
When calculating rb->frames_per_block * req->tp_block_nr the result can overflow. Add a check that tp_block_size * tp_block_nr <= UINT_MAX. Since frames_per_block <= tp_block_size, the expression would never overflow. Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrey Konovalov authored
Subtracting tp_sizeof_priv from tp_block_size and casting to int to check whether one is less then the other doesn't always work (both of them are unsigned ints). Compare them as is instead. Also cast tp_sizeof_priv to u64 before using BLK_PLUS_PRIV, as it can overflow inside BLK_PLUS_PRIV otherwise. Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arend Van Spriel authored
A use-after-free was found using KASAN. In brcmf_p2p_del_if() the virtual interface is removed using call to brcmf_remove_interface(). After that the virtual interface instance has been freed and should not be referenced. Solve this by storing the nl80211 iftype in local variable, which is used in a couple of places anyway. Cc: stable@vger.kernel.org # 4.10.x, 4.9.x Reported-by:
Daniel J Blueman <daniel@quora.org> Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Larry Finger authored
Following commit cceb0a59 ("rtlwifi: Add work queue for c2h cmd."), the following BUG is reported when rtl8723be is used: BUG: sleeping function called from invalid context at mm/slab.h:432 in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/0 CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W O 4.11.0-rc3-wl+ #276 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014 Call Trace: <IRQ> dump_stack+0x63/0x89 ___might_sleep+0xe9/0x130 __might_sleep+0x4a/0x90 kmem_cache_alloc_trace+0x19f/0x200 ? rtl_c2hcmd_enqueue+0x3e/0x110 [rtlwifi] rtl_c2hcmd_enqueue+0x3e/0x110 [rtlwifi] rtl8723be_c2h_packet_handler+0xac/0xc0 [rtl8723be] rtl8723be_rx_command_packet+0x37/0x5c [rtl8723be] _rtl_pci_rx_interrupt+0x200/0x6b0 [rtl_pci] _rtl_pci_interrupt+0x20c/0x5d0 [rtl_pci] __handle_irq_event_percpu+0x3f/0x1d0 handle_irq_event_percpu+0x23/0x60 handle_irq_event+0x3c/0x60 handle_fasteoi_irq+0xa2/0x170 handle_irq+0x20/0x30 do_IRQ+0x48/0xd0 common_interrupt+0x89/0x89 ... Although commit cceb0a59 converted most c2h commands to use a work queue, the Bluetooth coexistence routines can be in atomic mode when they execute such a call. Fixes: cceb0a59 ("rtlwifi: Add work queue for c2h cmd.") Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Merge tag 'iwlwifi-for-kalle-2017-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes iwlwifi fixes for 4.11 Here are three patches intended for 4.11. The first one is an RCU fix by Sari. The second one is a fix for a potential out-of-bounds access crash by Dan. And finally, the third and bigger one, is a fix for IBSS, which has been broken since DQA was enabled in the driver.
-
- Mar 30, 2017
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains a rather large update with Netfilter fixes, specifically targeted to incorrect RCU usage in several spots and the userspace conntrack helper infrastructure (nfnetlink_cthelper), more specifically they are: 1) expect_class_max is incorrect set via cthelper, as in kernel semantics mandate that this represents the array of expectation classes minus 1. Patch from Liping Zhang. 2) Expectation policy updates via cthelper are currently broken for several reasons: This code allows illegal changes in the policy such as changing the number of expeciation classes, it is leaking the updated policy and such update occurs with no RCU protection at all. Fix this by adding a new nfnl_cthelper_update_policy() that describes what is really legal on the update path. 3) Fix several memory leaks in cthelper, from Jeffy Chen. 4) synchronize_rcu() is missing in the removal path of several modules, this may lead to races since CPU may still be running on code that has just gone. Also from Liping Zhang. 5) Don't use the helper hashtable from cthelper, it is not safe to walk over those bits without the helper mutex. Fix this by introducing a new independent list for userspace helpers. From Liping Zhang. 6) nf_ct_extend_unregister() needs synchronize_rcu() to make sure no packets are walking on any conntrack extension that is gone after module removal, again from Liping. 7) nf_nat_snmp may crash if we fail to unregister the helper due to accidental leftover code, from Gao Feng. 8) Fix leak in nfnetlink_queue with secctx support, from Liping Zhang. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Zakharov Vlad authored
After a new NAPI_STATE_MISSED state was added to NAPI we can get into this state and in such case we have to reschedule NAPI as some work is still pending and we have to process it. napi_complete_done() function returns false if we have to reschedule something (e.g. in case we were in MISSED state) as current polling have not been completed yet. nps_enet driver hasn't been verifying the return value of napi_complete_done() and has been forcibly enabling interrupts. That is not correct as we should not enable interrupts before we have processed all scheduled work. As a result we were getting trapped in interrupt hanlder chain as we had never been able to disabale ethernet interrupts again. So this patch makes nps_enet_poll() func verify return value of napi_complete_done() and enable interrupts only in case all scheduled work has been completed. Signed-off-by:
Vlad Zakharov <vzakhar@synopsys.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Small misc. fixes. Fix a NULL pointer crash in open failure path, wrong arguments when printing error messages, and a DMA unmap bug in XDP shutdown path. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
In bnxt_free_rx_skbs(), which is called to free up all RX buffers during shutdown, we need to unmap the page if we are running in XDP mode. Fixes: c61fb99c ("bnxt_en: Add RX page mode support.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-