Chestnut43 is an expansion board for Gumstix Overo products.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Alto35 is an expansion board for Gumstix Overo products.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Gallop43 is an expansion board for Gumstix Overo products.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Palo43 is an expansion board for Gumstix Overo products.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The LIS33DE accelerometer is used on several Gumstix expansion boards,
thus add the DT node to omap3-overo-common-peripherals.dtsi.

For the boards that do not have the accelerometer (like Tobi), mark the
status as disabled.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Gumstix expansion boards share a couple of peripherals:
- uart3 is used for the console
- AT24C01 EEPROM on i2c3

Use this file for overo-tobi.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>

UART3 is used by expansion boards to get a tty console. Thus, the
pinmux should be defined by expansion boards, instead of being
imposed by the processor board.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add the AT24C01 EEPROM node populated on most Gumstix expansion board.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Use the timings provided by omap-gpmc-smsc9221. This does not change
the timings, but it avoids code duplication.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Some devices (SMSC9217, SMSC9218 and SMSC9221 at least) have better
timings, allowing a higher transfer speed. Create a common file
with these timings.

Performance results with iperf:

- omap-gpmc-smsc911x.dtsi => 54.9 Mbps
- omap-gpmc-smsc9221.dtsi => 92.7 Mbps

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add the High-Speed USB PHY.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

MMC2 is used by the on-board WiFi module populated on some boards
(based on Marvell Libertas 8688 SDIO). The Bluetooth is connected
to UART2.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add missing pinctrl entries for:
- i2c1
- mmc1

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add missing pinctrl entries:
- i2c3

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Currently, overo-related include files are organized as follow:

                     omap3-overo.dtsi
                             |
                             |
omap34xx.dtsi   omap3-overo-tobi-common.dtsi   omap36xx.dtsi
      |              |                 |             |
      ---------------                  ---------------
              |                                |
    omap3-overo-tobi.dts          omap3-overo-storm-tobi.dts

This is unpractical when one has to deal with SoC-specific pinmux
belonging to the omap3_pmx_core2 (defined in omap34xx/omap36xx),
for pins related to the processor board. With the current
hierarchy, such pinmux has to be defined in the expansion board's
.dts, which is not logical.

This patches reorganizes the files to add (yet another) abstraction
layer between the processor and the expansion boards.

omap34xx.dtsi       omap3-overo-base.dtsi      omap36xx.dtsi
      |              |                 |             |
      ---------------                  ---------------
              |                                |
      omap3-overo.dtsi               omap3-overo-storm.dtsi
              |                                |
      --------                                  ------
      |         omap3-overo-tobi-common.dtsi         |
      |              |                 |             |
      ---------------                  ---------------
              |                                |
    omap3-overo-tobi.dts          omap3-overo-storm-tobi.dts

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The testcase data is usable by any platform. This patch moves it into
the drivers/of directory so it can be included by any architecture.

Using the test cases requires manually adding #include <testcases.dtsi>
to the end of the boards .dtsi file and enabling CONFIG_OF_SELFTEST. Not
pretty though. A useful project would be to make the testcase code
easier to execute.

Signed-off-by: Grant Likely <grant.likely@linaro.org>

Fix tegra_init_cache() to check whether the system has a PL310 cache
before touching the PL310 registers. This prevents access to non-existent
registers on Tegra114 and later.

Note for stable kernels:
In <= v3.12, the file to patch is arch/arm/mach-tegra/common.c.

Cc: <stable@vger.kernel.org> # v3.9+
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

The number of the head specifies the index of the display controller
unit and is required to properly configure outputs so that they receive
video data from the correct source.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

When building a kernel image with only CONFIG_CPU_IDLE but no CONFIG_PM,
we will get the following link error.

  LD      init/built-in.o
arch/arm/mach-imx/built-in.o: In function `imx6q_enter_wait':
platform-spi_imx.c:(.text+0x25c0): undefined reference to `imx6q_set_lpm'
platform-spi_imx.c:(.text+0x25d4): undefined reference to `imx6q_set_lpm'
arch/arm/mach-imx/built-in.o: In function `imx6q_cpuidle_init':
platform-spi_imx.c:(.init.text+0x75d4): undefined reference to `imx6q_set_chicken_bit'
make[1]: *** [vmlinux] Error 1

Since pm-imx6q.c has been a collection of library functions that access
CCM low-power registers used by not only suspend but also cpuidle and
other drivers, let's build pm-imx6q.c independently of CONFIG_PM to fix
above error.

Reported-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: stable@vger.kernel.org
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

This alias entry was evidently cut/paste from a different board, and
not correctly updated to match Cardhu. Fix this.

Fixes: 553c0a20

 ("ARM: tegra: set up /aliases entries for RTCs")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

The corresponding driver didn't make it into v3.14, so we need to remove
the node.  Dove systems fail to boot with the node present and no
driver.

This node will be re-added when the driver makes it to mainline.

Reported-by: Jean-Francois Moine <moinejf@free.fr>
Tested-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Add DSB after icache flush to complete the cache maintenance operation.

Signed-off-by: Vinayak Kale <vkale@apm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This reverts commit 01ab1167

, it is
incorrect, a future patch will fix this up properly.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Unfortunatly the device tree for older OMAP35xx Overo cannot be used
with newer OMAP36xx and vice-versa. To address this issue, move most of
the Tobi DTS to a common include file, and create model-specific Tobi
DTS.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Tested-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Gumstix is the correct vendor for all Overo related products.

Reported-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Tobi expansion board can be used with both OMAP35xx-based Overo,
and OMAP36xx-based Overo. Currently the boot is broken with newer
OMAP36xx-based Overo (Storm and alike). Fix include file and
compatible string to be able to boot newer models.

This will break older models. This will be addressed later.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Tested-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Commit 97411608

 ("ARM: OMAP2+: Remove legacy support for zoom
platforms") removed the Kconfig symbols MACH_OMAP_ZOOM2 and
MACH_OMAP_ZOOM3. Remove the last usage of the related macros too.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The last caller of machine_is_nokia_n800() was removed in commit
5a87cde4

 ("ARM: OMAP2+: Remove legacy booting support for n8x0").
That means that the Kconfig symbol MACH_NOKIA_N800 is now unused. It can
safely be removed.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add missing compatible property to avoid problems in the future.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

N9/N950 does not boot anymore with 3.14-rc1, because SoC compatible
property is missing. Fix that.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add platform data for tahvo-usb. This is the last missing piece to get
Tahvo USB working with 3.14.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fixes: commit 75d3625e


       ARM: OMAP2+: gpmc: add DT bindings for OneNAND

OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and
register them platform_device for ONENAND driver to probe later. However this does
not happen if generic MTD_ONENAND framework is built as module (CONFIG_MTD_ONENAND=m).

Therefore, when MTD/ONENAND and MTD/ONENAND/OMAP2 modules are loaded, they are unable
to find any matching platform_device and remain un-binded. This causes on board
ONENAND flash to remain un-detected.

This patch causes GPMC controller to parse DT nodes when
CONFIG_MTD_ONENAND=y || CONFIG_MTD_ONENAND=m

CC: <stable@vger.kernel.org> # 3.9.x+
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fixes: commit bc6b1e7b


       ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND

OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and
register them platform_device for NAND driver to probe later. However this does
not happen if generic MTD_NAND framework is built as module (CONFIG_MTD_NAND=m).

Therefore, when MTD/NAND and MTD/NAND/OMAP2 modules are loaded, they are unable
to find any matching platform_device and remain un-binded. This causes on board
NAND flash to remain un-detected.

This patch causes GPMC controller to parse DT nodes when
CONFIG_MTD_NAND=y || CONFIG_MTD_NAND=m

CC: <stable@vger.kernel.org> # 3.9.x+
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Does not have an aux supply, and must be non-removable.

Otherwise it is removed during suspend and filesystem gets confused.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>

It should be ACTIVE_HIGH.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>

OMAP5, DRA7, AM43xx all have OPPs. So select the same to allow SoC
only configuration boot to work with OPP.

Reported-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add pinctrl section and cd-gpio to mmc1. Without these the SD card is not
working on EVM-SK board.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The clock for audio is sourced from virt_24000000_ck, so the correct
frequency is 24000000.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

BMP085 EOC (End Of Conversion) irq line is connected to
gpio113 on gta04. Set irq properties to have driver using irq
instead polling for EOC.

Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Commit 70b41abc


"ARM: ux500: move MSP pin control to the device tree"
accidentally activated MSP2, giving rise to a boot scroll
scream as the kernel attempts to probe a driver for it and
fails to obtain DMA channel 14.

Fix this up by marking the node disabled again.

Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>