- Aug 27, 2016
-
-
Hans de Goede authored
This results in a nice cleanup :) Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
The ehci1/ohci1 pair on the ba10-tv-box is connected to an USB-2 wifi module soldered on the PCB, so there enabling ohci1 is not necessary. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
The polaroid-mid2809 tablet has an esp8089 wifi chip, add a dt node describing it. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
The polaroid-mid2407 tablet has an esp8089 wifi chip, add a dt node describing it. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
- Aug 26, 2016
-
-
Icenowy Zheng authored
A23/A33 has a NAND controller which can now be used properly. Add a device node for it. The DMA function cannot work because of changed DMA IP block, so it's temporarily removed in the device node. However, with PIO mode it can still work. Tested on an Aoson M751s tablet with Boris Brezillon's "mtd: nand: allow vendor specific detection/initialization" patchset, which is needed for the large-block MLC chip to be recognized correctly. ( http://lists.infradead.org/pipermail/linux-mtd/2016-June/068198.html ) Signed-off-by:
Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
- Aug 23, 2016
-
-
Hans de Goede authored
Add a dts file for tablets using the generic inet-q972 PCB. Tablets with this PCB feature a mini-hdmi output, micro-usb usb-host, micro-usb usb-otg, 3.5mm headphone jack, a micro sd slot, (mini) power-barrel and an usb wifi module. This has been tested on a 9.7" 1024x768 qware qw tb9718-qhd tablet. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Just like with a13/a23/a33 most a31 tablets are derived from the same reference design. Add a .dtsi file with all the common bits to avoid endless copy and pasting of these. The sun6i-reference-design-tablet.dtsi this commit adds is a copy of sun6i-a31s-colorfly-e708-q1.dts with a few tablet specific bits removed / left in sun6i-a31s-colorfly-e708-q1.dts. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
The presence of the mma8452_int_e708_q1 node is a copy and paste error, remove it. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
The 32.768 kHz clock inside the A80 SoC is fed from an external source, typically the AC100 RTC module. Make the osc32k placeholder a fixed-factor clock so board dts files can specify its source. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Almost all sun8i tablets use a gsl1680 touchscreen controller, so add a node describing it to reference-design-tablet.dtsi. Almost all, but not all, so mark it as disabled by default (dts files will also need to supply a firmware-name and resolution info). Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
The ga10h tablet has a rtl8703as wifi chip, add a dt node describing it. This enables usage of wifi on this tablet (together with the out of tree rtl8732bs driver). Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
This results in quite a nice cleanup for this dts file. As an added bonus this also enables full otg support. I've tested that this works as advertised. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
The Orange Pi Lite SBC is a small H3 based SBC, with 512MB RAM, micro-sd slot, HDMI out, 2 USB-A connectors, 1 micro-USB connector, sdio attached rtl8189ftv wifi and an ir receiver. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Stefan Mavrodiev authored
A33-OLinuXino is A33 development board designed by Olimex LTD. It has AXP223 PMU, 1GB DRAM, a micro SD card, one USB-OTG connector, headphone and mic jacks, connector for LiPo battery and optional 4GB NAND Flash. It has two 40-pin headers. One for LCD panel, and one for additional modules. Also there is CSI/DSI connector. Signed-off-by:
Stefan Mavrodiev <stefan.mavrodiev@gmail.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
- Aug 22, 2016
-
-
Maxime Ripard authored
The CHIP has a status LED connected to one of the AXP GPIOs. Add the gpio-leds node to be able to use the proper LED framework to control it. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Maxime Ripard authored
Add the AXP209 GPIO node to our AXP209 DTSI so that boards can use it. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org>
-
- Aug 09, 2016
-
-
Hans de Goede authored
This will allow u-boot to fill in a mac-address for Orange Pi 2 variants which use an sdio wifi without an eeprom for the mac. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
There is a new Orange Pi PC *Plus* version available now, this is an extended version of the regular Orange Pi PC with sdio wifi and an eMMC. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> [Maxime: Fix model and compatible] Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Now that we've all the necessary bits in place we can enable full otg support on these tablets. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
- Aug 03, 2016
-
-
Vitaly Andrianov authored
This commit adds definition for cpu_on, cpu_off and cpu_suspend commands. These definitions must match the corresponding PSCI definitions in boot monitor. Having those command and corresponding PSCI support in boot monitor allows run time CPU hot plugin. Link: http://lkml.kernel.org/r/E1b8koV-0004Hf-2j@rmk-PC.armlinux.org.uk Signed-off-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
Vitaly Andrianov <vitalya@ti.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Cc: Pratyush Anand <panand@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Simon Horman <horms@verge.net.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Jul 23, 2016
-
-
Stefan Agner authored
Replace the non-standard vendor prefix stm with st for STMicroelectronics. The drivers do not specify the vendor prefixes since the I2C Core strips them away from the DT provided compatible string. Therefore, changing existing device trees does not have any impact on device detection. Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Rob Herring <robh@kernel.org>
-
- Jul 18, 2016
-
-
Hans de Goede authored
The inet86dz board is a board used in 7" tablets from various oems. These tablets are a23 based 7" tablets featuring a 1024x600 LCD, 512MB RAM, 4G NAND, rtl8188etv usb wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
The Polaroid MID2407PXE03 is an a23 based 7" tablet based on a M86_MB V2.0 PCB, featuring a 800x480 LCD, 512MB RAM, 4G NAND, esp8089 wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
This results in quite a nice cleanup for this dts file. As an added bonus this also enables backlight, regulator and full otg support. I've tested that all these works as advertised. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
This results in quite a nice cleanup for this dts file. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Add a drivevbus-supply property so that the drivevbus regulator reports the right voltage value. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Copy sun8i-q8-common.dtsi to sun8i-reference-design-tablet.dtsi. This is part of renaming all the sun?i-q8-common.dtsi files to sun?i-reference-design-tablet.dtsi since most of the hw-config in there is shared by all sunxi tablets. Note that in this case we keep sun5i-q8-common.dtsi as it is shared between a23 / a33 q8 tablets. Also we leave the usb-wifi config in there (rather then in sun8i-reference-design-tablet.dtsi) as most sun8i tablets use sdio wifi rather then usb wifi. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
This results in a nice cleanup for this dts file. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
This results in quite a nice cleanup for this dts file. Note as a side-effect this also enables the on board speaker / headphones out. I've tested that this works as advertised. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Remove all mention of q8 from sun5i-reference-design-tablet.dtsi. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Set lradc vref to the actual avcc ldo, rather then to the fixed 3v0 regulator from common-regulators.dtsi. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Rename sun5i-q8-common.dtsi to sun5i-reference-design-tablet.dtsi. This is part of renaming all the sun?i-q8-common.dtsi files to sun?i-reference-design-tablet.dtsi since most of the hw-config in there is shared by all sunxi tablets. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
This is a preparation patch for renaming sun5i-q8-common.dtsi to sun5i-reference-design-tablet.dtsi and sharing it between all the A13 tablet dts files. Since we only have a panel config for the 18 tablets (for now) move this to the q8 specific dts file. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Rename sunxi-q8-common.dtsi to sunxi-reference-design-tablet.dtsi. This is part of renaming all the sun?i-q8-common.dtsi files to sun?i-reference-design-tablet.dtsi since most of the hw-config in there is shared by all sunxi tablets. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Matthew McClintock authored
Commit 0dfd582e ("watchdog: qcom: use timer devicetree binding") moved to use the watchdog as a subset timer register block. Some devices have the watchdog completely standalone with slightly different register offsets as well so let's account for the differences here. The existing "kpss-standalone" compatible string doesn't make it entirely clear exactly what the device is so rename to "kpss-wdt" to reflect watchdog timer functionality. Also update ipq4019 DTS with an SoC specific compatible. Signed-off-by:
Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by:
Thomas Pedersen <twp@codeaurora.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be>
-
Matthew McClintock authored
Update the compatible string to align with driver and also add SoC specific string to DTS. CC: linux-watchdog@vger.kernel.org Signed-off-by:
Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by:
Thomas Pedersen <twp@codeaurora.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be>
-
- Jul 15, 2016
-
-
Arnd Bergmann authored
Building both ARMv4 and ARMv5 dtbs when SOC_SAM_V4_V5 is an issue for kernelci because it will then attempt to boot ARMv4 kernels on at91sam9 which doesn't work. Use CONFIG_SOC_AT91RM9200 and CONFIG_SOC_AT91SAM9 instead. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Alexandre Belloni authored
Separate the definitions for the emac and the gmac in different files and include them in the final board dts that uses them. Solves: Warning (unit_address_vs_reg): Node /ahb/apb/ethernet@f0028000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /ahb/apb/ethernet@f802c000 has a unit name, but no reg property Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com>
-