- Mar 12, 2015
-
-
Simon Guinot authored
This patch adds the DT description for the LaCie "2Big NAS" (nas2big). This NAS is an hardware upgrade of the 2Big Network v2. Chipset and device list: - CPU Marvell 88F6282 1600Mhz - SDRAM memory, 256MB DDR3 (2x128MB x8) 533Mhz - 1 Ethernet Gigabit port (PHY Marvell 88E1518) - Flash memory, NAND 256MB TSOP48 - I2C EEPROM, 512 bytes (AT24 type) - PCIe SATA controller JMicron JMB360 (eSATA) - I2C fan controller GMT G762 (with a separate alarm GPIO) - 1 USB2 host port - 1 push button - 1 power switch - 2 SATA LEDs (bi-color, blue and red) - 1 power LED (bi-color, blue and red) - CPLD for LEDs and start-up management (Altera Max EMP3064) Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
- Mar 04, 2015
-
-
Thomas Petazzoni authored
This commit adds the Device Tree files for the Armada 39x family of processors, as well as one Armada 398 Development Board. Like for other Marvell EBU families, a common armada-39x.dtsi contains the description of the common features of all Armada 39x SoCs, while armada-390.dtsi and armada-398.dtsi respectively describe the specificities of those SoCs. Finally, an armada-398-db.dts file is added to describe the Armada 398 Development Board itself. So far, the following features are supported: * SMP: dual Cortex-A9 * Basic ARM IPs: SCU, timer, GIC, L2 cache * Basic Marvell IPs: pin-muxing, clocks, system controller, MBus controller, MPIC interrupt controller, timer, CPU reset for SMP, PMSU. * I2C * SPI * SDHCI * XOR * NAND * UART * PCIe Additional features will be supported in the future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Thomas Petazzoni authored
The Device Tree nodes describing the MPIC nodes on Armada 370, 375, 38x and XP had a unit address that did not match the first reg property, as suggested by the ePAPR. This commit fixes that. [gregory.clement@free-electrons.com: removed the armada-38x part, as it was already applied by a previous patch] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Thomas Petazzoni authored
This commit adds the stdout-path property in /chosen for all Armada boards that were not yet carrying this property, and gets rid of /chosen/bootargs which becomes unneeded: earlyprintk should not be used by default, and the console= parameter is replaced by the /chosen/stdout-path property. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Thomas Petazzoni authored
This commit adds 'serialX' aliases for the various serial ports on Armada 370, 375, 38x and XP platforms. It will allow the usage of the stdout-path property. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Thomas Petazzoni authored
Having aliases for Ethernet devices is useless, since the networking subsystem unfortunately doesn't care about aliases to name network interfaces. Note that the 'aliases' nodes in armada-370-xp.dtsi and armada-xp.dtsi become empty, but that we keep it as is since a followup patch will re-add some aliases to it. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Thomas Petazzoni authored
This commit adds the standard uart0 and uart1 DT labels to the Device Tree description of the Marvell Armada 375 SoC. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Thomas Petazzoni authored
The Armada 38x had a label for UART0, but not UART1. This commit fixes that. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Thomas Petazzoni authored
On Marvell Armada 38x, the USB2 controller registers are at 0x58000, so the corresponding Device Tree node should have a unit address of 58000, and not 50000. We were using 50000 due to an incorrect copy/pastebin of Armada 370/XP code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Maxime Ripard authored
The Armada 385 Access Point Development Board has a 1GB NAND SLC chip from Micron as its main storage. Enable it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Andrew Lunn authored
Add a DSA section to the DT blob representing the Ethernet switch. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Simon Guinot authored
On the LaCie 2Big Network v2 (net2big_v2) board, the fan alarm is not wired to the I2C fan controller but to a separe GPIO. This GPIO can be controlled by using the gpio-fan driver. This patch adds the gpio-fan alarm description in the net2big_v2 DTS. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Maxime Ripard authored
The unit-address is supposed to be equal the first reg address, which is not the case for the MPIC, that uses the mbus-controller one. Fix this. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Sebastian Hesselbarth authored
This add common pinctrl settings for pcie[01]_clkreq, spi1, i2c[23], and internal i2c mux. These settings have either one or two options only, so put them into the SoC dtsi instead of repeating them on board level. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
- Feb 27, 2015
-
-
Sebastian Hesselbarth authored
Add pcie[01] node labels to allow to reference them easily from board level. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Sebastian Hesselbarth authored
We want to enforce the use of named flags in GPIO and interrupt specifiers, include the corresponding headers to Dove's SoC dtsi. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Sebastian Hesselbarth authored
Fix Dove's register addresses of uart2 and uart3 nodes that seem to be broken since ages due to a copy-and-paste error. Cc: <stable@vger.kernel.org> # 3.7+ Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Imre Kaloz authored
The Linksys WRT1900AC (Mamba) is a router that has - 2 mini-PCIe slots with Marvell 88W8864 radios - 1 USB 3.0 port - 1 USB 2.0/eSATAp port - 2 Ethernet interfaces connected to a 88E6172 switch (1x WAN + 4x LAN) - 128MB NAND flash - 256MB RAM gregory.clement@free-electrons.com: - add ARM to the title - fix the reference to CONFIG_DEBUG_MVEBU_UART0_ALTERNATE - fix the unbalanced comment for the syscfg partition Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
- Feb 23, 2015
-
-
Gregory CLEMENT authored
The Device Tree description of SDHCI on Armada 388 RD board was missing. This commit adds the node for it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Gregory CLEMENT authored
The binding of the armada-380-sdhci has been extended with a new register in order to be able to use the SDR50 and DDR50 mode. This commit add the resource associated to this new register for the Armada 38x. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Gregory CLEMENT authored
Instead of hardcoding the values of the interrupt flags, use the macros provided by <include/dt-bindings/interrupt-controller/irq.h> and <include/dt-bindings/interrupt-controller/arm-gic.h> for the Armada 38x SDHCI node. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
- Feb 17, 2015
-
-
Arnaud Ebalard authored
"isil" and "isl" prefixes are used at various locations inside the kernel to reference Intersil corporation. This patch is part of a series fixing those locations were "isl" is used in compatible strings to use the now expected "isil" prefix instead (NASDAQ symbol for Intersil and most used version). Note: isl9305 is an I2C device so the patch does not in fact currently depend on the introduction of "isil"-based compatible string in isl9305 driver (provided by another patch) because I2C core does not check the prefix yet. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Uwe Kleine-Knig <uwe@kleine-koenig.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Darshana Padmadas <darshanapadmadas@gmail.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Landley <rob@landley.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ray Jui authored
Add I2C device nodes and its properties in bcm-cygnus.dtsi but keep them disabled there. Individual I2C devices can be enabled in board specific dts file when I2C slave devices are enabled in the future Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Reviewed-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
Florian Fainelli authored
The L2 cache properties were completely off with respect to what the hardware is configured for. Fix the cache-size, cache-line-size and cache-sets to reflect the L2 cache controller we have: 512KB, 16 ways and 32 bytes per cache-line. Fixes: 46d4bca0 ("ARM: BCM63XX: add BCM63138 minimal Device Tree") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
- Feb 14, 2015
-
-
Gregory CLEMENT authored
The Marvell Armada 38x SoCs contains an RTC which differs from the RTC used in the other mvebu SoCs until now. This commit adds the Device Tree description of this interface at the SoC level. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Arnaud Ebalard <arno@natisbad.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Boris BREZILLON <boris.brezillon@free-electrons.com> Cc: Lior Amsalem <alior@marvell.com> Cc: Tawfik Bayouk <tawfik@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Arnaud Ebalard authored
Now that alarm support for ISL12057 chip is available w/ the specific "isil,irq2-can-wakeup-machine" property, let's use that feature of the driver dedicated to NETGEAR ReadyNAS 102, 104 and 2120 specific routing of RTC Alarm IRQ#2 pin; on those devices, this pin is not connected to the SoC but to a PMIC, which allows the device to be powered up when RTC alarm rings. For that to work, the chip needs to be explicitly marked as a device wakeup source using this "isil,irq2-can-wakeup-machine" boolean property. This makes 'wakealarm' sysfs entry available to configure the alarm. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Darshana Padmadas <darshanapadmadas@gmail.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Landley <rob@landley.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Kumar Gala <galak@codeaurora.org> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- Feb 09, 2015
-
-
Sylwester Nawrocki authored
Now when the CDCLK I2S output clock can be handled through the clock API the Odroid X2/U3 can be switched to the simple-audio-card DT binding. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Sylwester Nawrocki authored
Clock related properties are added to the Exynos4 I2S device nodes so they can be referred to as clock providers. Missing i2s_opclk1 clock is added to the I2S0 node and clock properties are added to the MAX98090 codec node to allow it to control/read frequency of the MCLK clock directly. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- Feb 06, 2015
-
-
Sylwester Nawrocki authored
I2S1, I2S2 on Exynos4 SoC series have limited functionality compared to I2S0, "samsung,s3c6410-i2s" compatible should be used for them. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
-
- Feb 05, 2015
-
-
Andy Shevchenko authored
Instead of using magic number in the code the patch provides DW_DMA_MAX_NR_MASTERS constant. While here, restrict the reading of data width array by amount of the actual number of AHB masters. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
- Feb 04, 2015
-
-
Chanwoo Choi authored
This patch add dt node for PPMU_{DMC0|DMC1|LEFTBUS|RIGHTBUS} for exynos4412-trats2 board. Each PPMU dt node includes one event of 'PPMU Count3'. Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
-
Chanwoo Choi authored
This patch adds PPMU dt node for Exynos3250 based Rinato and Monk boards. The PPMU node is used to get the utilization of DMC0/DMC1/ LEFTBUS/RIGHTBUS Block. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
-
Chanwoo Choi authored
This patch add PPMUs (Platform Performance Monitoring Unit) dt node for Exynos4 (Exynos4210/4212/4412) SoCs. PPMU dt node is used for monitor the utilization of each IP. The Exynos4210/Exynos4212/Exynos4412 SoC includes following PPMUs: - PPMU_DMC0 0x106A_0000 - PPMU_DMC1 0x106B_0000 - PPMU_CPU 0x106C_0000 - PPMU_ACP 0x10AE_0000 - PPMU_RIGHT_BUS 0x112A_0000 - PPMU_LEFT_BUS 0x116A_0000 - PPMU_FSYS 0x1263_0000 - PPMU_LCD0 0x11E4_0000 - PPMU_CAMIF 0x11AC_0000 - PPMU_IMAGE 0x12AA_0000 - PPMU_TV 0x12E4_0000 - PPMU_3D 0x1322_0000 - PPMU_MFC_LEFT 0x1366_0000 - PPMU_MFC_RIGHT 0x1367_0000 Additionally, the Exynos4210 SoC includes following PPMUs: - PPMU_LCD1 0x1224_0000 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
-
Chanwoo Choi authored
This patch adds PPMU (Platform Performance Monitoring Unit) dt node to estimate the utilization of each IP in Exynos SoC through DEVFREQ Event subsystem. This patch adds following PPMU dt nodes: - PPMU_DMC0 0x106a0000 - PPMU_DMC1 0x106b0000 - PPMU_RIGHTBUS 0x112A0000 - PPMU_LEFTBUS 0x116A0000 - PPMU_CAMIF 0x11AC0000 - PPMU_LCD0 0x11E40000 - PPMU_FSYS 0x12630000 - PPMU_3D 0x13220000 - PPMU_MFC 0x13660000 - PPMU_CPU 0x106c0000 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
-
YoungJun Cho authored
This patch adds mipi dsi device node to exynos4415.dtsi. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
-
YoungJun Cho authored
This patch adds fimd device node to exynos4415.dtsi. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
-
Sylwester Nawrocki authored
This is required to fix regression after introducing the PMU device nodes required for the PMU driver modified in commit 14fc8b93 ("ARM: EXYNOS: Add platform driver support for Exynos PMU"). This change is needed to make MIPI DSI displays and MIPI CSI-2 camera sensors working again on Exynos4 boards. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
-
Inha Song authored
This patch add WM1811 audio codec, I2S interface and the sound machine nodes to enable audio on exynos4412-trats2 board. Signed-off-by: Inha Song <ideal.song@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
-
Sylwester Nawrocki authored
In order to get exact 24MHz clock frequency value for the camera sensor and avoid rounding errors the parent clock must be CLK_XUSBXTI, not CLK_MOUT_MPLL_USER_T. Currently the sensor's master clock frequency is too high and the sensor doesn't work properly. This fixes commit 0357a443 ("ARM: dts: Specify default clocks for Exynos4 camera devices"). Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
-
Sylwester Nawrocki authored
Assign proper FIMC-IS UART gate clock in the device DT node and not use the SRC_MASK gate. This fixes regression introduced in commit a37c82a3 ("clk: samsung: exynos4: Remove SRC_MASK_ISP gates"). Without this change exynos4 fimc-is driver fails to probe with an error log: [ 1.842447] ERROR: could not get clock /camera/fimc-is@12000000:uart(13) [ 1.848529] exynos4-fimc-is 12000000.fimc-is: failed to get clock: uart [ 1.855275] exynos4-fimc-is: probe of 12000000.fimc-is failed with error -2 Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
-