This commit fixes a stack corruption in the pseries specific code dealing
with the huge pages.

In __pSeries_lpar_hugepage_invalidate() the buffer used to pass arguments
to the hypervisor is not large enough. This leads to a stack corruption
where a previously saved register could be corrupted leading to unexpected
result in the caller, like the following panic:

  Oops: Kernel access of bad area, sig: 11 [#1]
  SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in: virtio_balloon ip_tables x_tables autofs4
  virtio_blk 8139too virtio_pci virtio_ring 8139cp virtio
  CPU: 11 PID: 1916 Comm: mmstress Not tainted 4.8.0 #76
  task: c000000005394880 task.stack: c000000005570000
  NIP: c00000000027bf6c LR: c00000000027bf64 CTR: 0000000000000000
  REGS: c000000005573820 TRAP: 0300   Not tainted  (4.8.0)
  MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 84822884  XER: 20000000
  CFAR: c00000000010a924 DAR: 420000000014e5e0 DSISR: 40000000 SOFTE: 1
  GPR00: c00000000027bf64 c000000005573aa0 c000000000e02800 c000000004447964
  GPR04: c00000000404de18 c000000004d38810 00000000042100f5 00000000f5002104
  GPR08: e0000000f5002104 0000000000000001 042100f5000000e0 00000000042100f5
  GPR12: 0000000000002200 c00000000fe02c00 c00000000404de18 0000000000000000
  GPR16: c1ffffffffffe7ff 00003fff62000000 420000000014e5e0 00003fff63000000
  GPR20: 0008000000000000 c0000000f7014800 0405e600000000e0 0000000000010000
  GPR24: c000000004d38810 c000000004447c10 c00000000404de18 c000000004447964
  GPR28: c000000005573b10 c000000004d38810 00003fff62000000 420000000014e5e0
  NIP [c00000000027bf6c] zap_huge_pmd+0x4c/0x470
  LR [c00000000027bf64] zap_huge_pmd+0x44/0x470
  Call Trace:
  [c000000005573aa0] [c00000000027bf64] zap_huge_pmd+0x44/0x470 (unreliable)
  [c000000005573af0] [c00000000022bbd8] unmap_page_range+0xcf8/0xed0
  [c000000005573c30] [c00000000022c2d4] unmap_vmas+0x84/0x120
  [c000000005573c80] [c000000000235448] unmap_region+0xd8/0x1b0
  [c000000005573d80] [c0000000002378f0] do_munmap+0x2d0/0x4c0
  [c000000005573df0] [c000000000237be4] SyS_munmap+0x64/0xb0
  [c000000005573e30] [c000000000009560] system_call+0x38/0x108
  Instruction dump:
  fbe1fff8 fb81ffe0 7c7f1b78 7ca32b78 7cbd2b78 f8010010 7c9a2378 f821ffb1
  7cde3378 4bfffea9 7c7b1b79 41820298 <e87f0000> 48000130 7fa5eb78 7fc4f378

Most of the time, the bug is surfacing in a caller up in the stack from
__pSeries_lpar_hugepage_invalidate() which is quite confusing.

This bug is pending since v3.11 but was hidden if a caller of the
caller of __pSeries_lpar_hugepage_invalidate() has pushed the corruped
register (r18 in this case) in the stack and is not using it until
restoring it. GCC 6.2.0 seems to raise it more frequently.

This commit also change the definition of the parameter buffer in
pSeries_lpar_flush_hash_range() to rely on the global define
PLPAR_HCALL9_BUFSIZE (no functional change here).

Fixes: 1a527286

 ("powerpc: Optimize hugepage invalidate")
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Freescale updates from Scott:

"Highlights include qbman support (a prerequisite for datapath drivers
such as ethernet), a PCI DMA fix+improvement, reset handler changes, more
8xx optimizations, and some cleanups and fixes."

The changes to make EXPORT_SYMBOL work in asm, specifically commit
9445aa1a

 ("ppc: move exports to definitions"), in the kbuild tree,
breaks some of our selftests.

That is because we symlink the kernel code into the selftest, and shim
the required headers, and we are now missing asm/export.h

So create a minimal export.h to keep the tests building once powerpc and
the kbuild trees are merged.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The selftests under tools/testing/selftests/powerpc are maintained by
us, so add a file pattern for them.

Also drop the www.penguinppc.org link, it's not dead, but the site is
dead (database error). Instead link to the wiki attached to our github,
there is some info there which may be useful, which is better than none.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Paul is no longer acting as a separate maintainer for pseries, it is
handled along with the rest of powerpc. The URL no longer links anywhere
meaningful, so drop it also.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Paul Mackerras <paulus@ozlabs.org>

The platform is old, very few users and I lack bandwidth to keep after
it these days.

Mark the base platform as well as the drivers as orphans, patches have
been flowing through the fallback maintainers for a while already.

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Some of the recent new selftests were missing additions to .gitignore,
add them now.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In line with similar support for other architectures by Daniel Borkmann.

'MOD Default X' from test_bpf without constant blinding:
84 bytes emitted from JIT compiler (pass:3, flen:7)
d0000000058a4688 + <x>:
   0:	nop
   4:	nop
   8:	std     r27,-40(r1)
   c:	std     r28,-32(r1)
  10:	xor     r8,r8,r8
  14:	xor     r28,r28,r28
  18:	mr      r27,r3
  1c:	li      r8,66
  20:	cmpwi   r28,0
  24:	bne     0x0000000000000030
  28:	li      r8,0
  2c:	b       0x0000000000000044
  30:	divwu   r9,r8,r28
  34:	mullw   r9,r28,r9
  38:	subf    r8,r9,r8
  3c:	rotlwi  r8,r8,0
  40:	li      r8,66
  44:	ld      r27,-40(r1)
  48:	ld      r28,-32(r1)
  4c:	mr      r3,r8
  50:	blr

... and with constant blinding:
140 bytes emitted from JIT compiler (pass:3, flen:11)
d00000000bd6ab24 + <x>:
   0:	nop
   4:	nop
   8:	std     r27,-40(r1)
   c:	std     r28,-32(r1)
  10:	xor     r8,r8,r8
  14:	xor     r28,r28,r28
  18:	mr      r27,r3
  1c:	lis     r2,-22834
  20:	ori     r2,r2,36083
  24:	rotlwi  r2,r2,0
  28:	xori    r2,r2,36017
  2c:	xoris   r2,r2,42702
  30:	rotlwi  r2,r2,0
  34:	mr      r8,r2
  38:	rotlwi  r8,r8,0
  3c:	cmpwi   r28,0
  40:	bne     0x000000000000004c
  44:	li      r8,0
  48:	b       0x000000000000007c
  4c:	divwu   r9,r8,r28
  50:	mullw   r9,r28,r9
  54:	subf    r8,r9,r8
  58:	rotlwi  r8,r8,0
  5c:	lis     r2,-17137
  60:	ori     r2,r2,39065
  64:	rotlwi  r2,r2,0
  68:	xori    r2,r2,39131
  6c:	xoris   r2,r2,48399
  70:	rotlwi  r2,r2,0
  74:	mr      r8,r2
  78:	rotlwi  r8,r8,0
  7c:	ld      r27,-40(r1)
  80:	ld      r28,-32(r1)
  84:	mr      r3,r8
  88:	blr

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Tail calls allow JIT'ed eBPF programs to call into other JIT'ed eBPF
programs. This can be achieved either by:
(1) retaining the stack setup by the first eBPF program and having all
subsequent eBPF programs re-using it, or,
(2) by unwinding/tearing down the stack and having each eBPF program
deal with its own stack as it sees fit.

To ensure that this does not create loops, there is a limit to how many
tail calls can be done (currently 32). This requires the JIT'ed code to
maintain a count of the number of tail calls done so far.

Approach (1) is simple, but requires every eBPF program to have (almost)
the same prologue/epilogue, regardless of whether they need it. This is
inefficient for small eBPF programs which may not sometimes need a
prologue at all. As such, to minimize impact of tail call
implementation, we use approach (2) here which needs each eBPF program
in the chain to use its own prologue/epilogue. This is not ideal when
many tail calls are involved and when all the eBPF programs in the chain
have similar prologue/epilogue. However, the impact is restricted to
programs that do tail calls. Individual eBPF programs are not affected.

We maintain the tail call count in a fixed location on the stack and
updated tail call count values are passed in through this. The very
first eBPF program in a chain sets this up to 0 (the first 2
instructions). Subsequent tail calls skip the first two eBPF JIT
instructions to maintain the count. For programs that don't do tail
calls themselves, the first two instructions are NOPs.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

While at it, ensure that the location of the local save area is
consistent whether or not we setup our own stackframe. This property is
utilised in the next patch that adds support for tail calls.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The fadump code calls vmcore_cleanup() which only exists if
CONFIG_PROC_VMCORE=y. We don't want to depend on CONFIG_PROC_VMCORE,
because it's user selectable, so just wrap the call in an #ifdef.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Currently the MSR TM bit is always set if the hardware is TM capable.
This adds extra overhead as it means the TM SPRS (TFHAR, TEXASR and
TFAIR) must be swapped for each process regardless of if they use TM.

For processes that don't use TM the TM MSR bit can be turned off
allowing the kernel to avoid the expensive swap of the TM registers.

A TM unavailable exception will occur if a thread does use TM and the
kernel will enable MSR_TM and leave it so for some time afterwards.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If the kernel disables transactional memory (TM) and userspace still
tries TM related actions (TM instructions or TM SPR accesses) TM aware
hardware will cause the kernel to take a facility unavailable
exception.

Add checks for the exception being caused by illegal TM access in
userspace.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[mpe: Rewrite comment entirely, bugs in it are mine]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Previous rework of TM code leaves these functions unused

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Make the structures being used for checkpointed state named
consistently with the pt_regs/ckpt_regs.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

There is currently an inconsistency as to how the entire CPU register
state is saved and restored when a thread uses transactional memory
(TM).

Using transactional memory results in the CPU having duplicated
(almost) all of its register state. This duplication results in a set
of registers which can be considered 'live', those being currently
modified by the instructions being executed and another set that is
frozen at a point in time.

On context switch, both sets of state have to be saved and (later)
restored. These two states are often called a variety of different
things. Common terms for the state which only exists after the CPU has
entered a transaction (performed a TBEGIN instruction) in hardware are
'transactional' or 'speculative'.

Between a TBEGIN and a TEND or TABORT (or an event that causes the
hardware to abort), regardless of the use of TSUSPEND the
transactional state can be referred to as the live state.

The second state is often to referred to as the 'checkpointed' state
and is a duplication of the live state when the TBEGIN instruction is
executed. This state is kept in the hardware and will be rolled back
to on transaction failure.

Currently all the registers stored in pt_regs are ALWAYS the live
registers, that is, when a thread has transactional registers their
values are stored in pt_regs and the checkpointed state is in
ckpt_regs. A strange opposite is true for fp_state/vr_state. When a
thread is non transactional fp_state/vr_state holds the live
registers. When a thread has initiated a transaction fp_state/vr_state
holds the checkpointed state and transact_fp/transact_vr become the
structure which holds the live state (at this point it is a
transactional state).

This method creates confusion as to where the live state is, in some
circumstances it requires extra work to determine where to put the
live state and prevents the use of common functions designed (probably
before TM) to save the live state.

With this patch pt_regs, fp_state and vr_state all represent the
same thing and the other structures [pending rename] are for
checkpointed state.

Acked-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If a thread receives a signal while transactional the kernel creates a
second context to show the transactional state of the process. This
test loads some known values and waits for a signal and confirms that
the expected values are in the signal context.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If a thread receives a signal while transactional the kernel creates a
second context to show the transactional state of the process. This
test loads some known values and waits for a signal and confirms that
the expected values are in the signal context.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If a thread receives a signal while transactional the kernel creates a
second context to show the transactional state of the process. This
test loads some known values and waits for a signal and confirms that
the expected values are in the signal context.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If a thread receives a signal while transactional the kernel creates a
second context to show the transactional state of the process. This
test loads some known values and waits for a signal and confirms that
the expected values are in the signal context.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The FPU regs are placed at the top of the stack frame. Currently the
position expected to be passed to the macro. The macros now should be
passed the stack frame size and from there they can calculate where to
put the regs, this makes the use simpler.

Also move them to a header file to be used in an different area of the
powerpc selftests

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Ensure the kernel correctly switches VSX registers correctly. VSX
registers are all volatile, and despite the kernel preserving VSX
across syscalls, it doesn't have to. Test that during interrupts and
timeslices ending the VSX regs remain the same.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Much of the signal code takes a pt_regs on which it operates. Over
time the signal code has needed to know more about the thread than
what pt_regs can supply, this information is obtained as needed by
using 'current'.

This approach is not strictly incorrect however it does mean that
there is now a hard requirement that the pt_regs being passed around
does belong to current, this is never checked. A safer approach is for
the majority of the signal functions to take a task_struct from which
they can obtain pt_regs and any other information they need. The
caveat that the task_struct they are passed must be current doesn't go
away but can more easily be checked for.

Functions called from outside powerpc signal code are passed a pt_regs
and they can confirm that the pt_regs is that of current and pass
current to other functions, furthurmore, powerpc signal functions can
check that the task_struct they are passed is the same as current
avoiding possible corruption of current (or the task they are passed)
if this assertion ever fails.

CC: paulus@samba.org
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

After a thread is reclaimed from its active or suspended transactional
state the checkpointed state exists on CPU, this state (along with the
live/transactional state) has been saved in its entirety by the
reclaiming process.

There exists a sequence of events that would cause the kernel to call
one of enable_kernel_fp(), enable_kernel_altivec() or
enable_kernel_vsx() after a thread has been reclaimed. These functions
save away any user state on the CPU so that the kernel can use the
registers. Not only is this saving away unnecessary at this point, it
is actually incorrect. It causes a save of the checkpointed state to
the live structures within the thread struct thus destroying the true
live state for that thread.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

msr_check_and_set() always performs a mfmsr() to determine if it needs
to perform an mtmsr(), as mfmsr() can be a costly operation
msr_check_and_set() could return the MSR now on the CPU to avoid
callers of msr_check_and_set having to make their own mfmsr() call.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

giveup_all() causes FPU/VMX/VSX facilities to be disabled in a threads
MSR. If the thread performing the giveup was transactional, the kernel
must record which facilities were in use before the giveup as the
thread must have these facilities re-enabled on return to userspace.

>From process.c:
 /*
  * This is called if we are on the way out to userspace and the
  * TIF_RESTORE_TM flag is set.  It checks if we need to reload
  * FP and/or vector state and does so if necessary.
  * If userspace is inside a transaction (whether active or
  * suspended) and FP/VMX/VSX instructions have ever been enabled
  * inside that transaction, then we have to keep them enabled
  * and keep the FP/VMX/VSX state loaded while ever the transaction
  * continues.  The reason is that if we didn't, and subsequently
  * got a FP/VMX/VSX unavailable interrupt inside a transaction,
  * we don't know whether it's the same transaction, and thus we
  * don't know which of the checkpointed state and the transactional
  * state to use.
  */

Calling check_if_tm_restore_required() will set TIF_RESTORE_TM and
save the MSR if needed.

Fixes: c2085059

 ("powerpc: create giveup_all()")
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Comment from arch/powerpc/kernel/process.c:967:
 If userspace is inside a transaction (whether active or
 suspended) and FP/VMX/VSX instructions have ever been enabled
 inside that transaction, then we have to keep them enabled
 and keep the FP/VMX/VSX state loaded while ever the transaction
 continues.  The reason is that if we didn't, and subsequently
 got a FP/VMX/VSX unavailable interrupt inside a transaction,
 we don't know whether it's the same transaction, and thus we
 don't know which of the checkpointed state and the ransactional
 state to use.

restore_math() restore_fp() and restore_altivec() currently may not
restore the registers. It doesn't appear that this is more serious
than a performance penalty. If the math registers aren't restored the
userspace thread will still be run with the facility disabled.
Userspace will not be able to read invalid values. On the first access
it will take an facility unavailable exception and the kernel will
detected an active transaction, at which point it will abort the
transaction. There is the possibility for a pathological case
preventing any progress by transactions, however, transactions
are never guaranteed to make progress.

Fixes: 70fe3d98

 ("powerpc: Restore FPU/VEC/VSX if previously used")
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This fixes warning reported from sparse:

  pci-ioda.c:451:49: warning: incorrect type in argument 2 (different base types)

Fixes: 262af557

 ("powerpc/powernv: Enable M64 aperatus for PHB3")
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This fixes the warnings reported from sparse:

  pci.c:312:33: warning: restricted __be64 degrades to integer
  pci.c:313:33: warning: restricted __be64 degrades to integer

Fixes: cee72d5b

 ("powerpc/powernv: Display diag data on p7ioc EEH errors")
Cc: stable@vger.kernel.org # v3.3+
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This fixes the warning reported from sparse:

  eeh-powernv.c:875:23: warning: constant 0x8000000000000000 is so big it is unsigned long

Fixes: ebe22531

 ("powerpc/powernv: Support PCI slot ID")
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The hub diag-data type is filled with big-endian data by OPAL call
opal_pci_get_hub_diag_data(). We need convert it to CPU-endian value
before using it. The issue is reported by sparse as pointed by Michael
Ellerman:

  eeh-powernv.c:1309:21: warning: restricted __be16 degrades to integer

This converts hub diag-data type to CPU-endian before using it in
pnv_eeh_get_and_dump_hub_diag().

Fixes: 2a485ad7

 ("powerpc/powernv: Drop PHB operation next_error()")
Cc: stable@vger.kernel.org # v4.1+
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The PE number (@frozen_pe_no), filled by opal_pci_next_error() is in
big-endian format. It should be converted to CPU-endian before it is
passed to opal_pci_eeh_freeze_clear() when clearing the frozen state if
the PE is invalid one. As Michael Ellerman pointed out, the issue is
also detected by sparse:

  eeh-powernv.c:1541:41: warning: incorrect type in argument 2 (different base types)

This passes CPU-endian PE number to opal_pci_eeh_freeze_clear() and it
should be part of commit <0f36db77> ("powerpc/eeh: Fix wrong printed
PE number"), which was merged to 4.3 kernel.

Fixes: 71b540ad

 ("powerpc/powernv: Don't escalate non-existing frozen PE")
Cc: stable@vger.kernel.org # v4.3+
Suggested-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This replaces of_get_property() with of_property_read_u32() or
of_property_read_string() so that we needn't consider the endian
issue, the returned value always is in CPU-endian.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
[mpe: Fold in the change to the "ibm,slot-surprise-pluggable" case]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Rewrite the cxl_guest_init_afu() loop in cxl_of_probe() to use
for_each_child_of_node() rather than a hand-coded for loop.

Remove the useless of_node_put(afu_np) call after the loop, where it's
guaranteed that afu_np == NULL.

Reported-by: SF Markus Elfring <elfring@users.sourceforge.net>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If the capi link is going down while the PSL owns a dirty cache line,
any access from the host for that data could lead to an Uncorrectable
Error.

So when resetting the capi adapter through sysfs, make sure the PSL
cache is flushed. It won't help if there are any active Process
Elements on the card, as the cache would likely get new dirty cache
lines immediately, but if resetting an idle adapter, it should avoid
any bad surprises from data left over from terminated Process Elements.

Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>