- Feb 17, 2021
-
-
Borislav Petkov authored
[ Upstream commit 256b92af ] Commit 20bf2b37 ("x86/build: Disable CET instrumentation in the kernel") disabled CET instrumentation which gets added by default by the Ubuntu gcc9 and 10 by default, but did that only for 64-bit builds. It would still fail when building a 32-bit target. So disable CET for all x86 builds. Fixes: 20bf2b37 ("x86/build: Disable CET instrumentation in the kernel") Reported-by: AC <achirvasub@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: AC <achirvasub@gmail.com> Link: https://lkml.kernel.org/r/YCCIgMHkzh/xT4ex@arch-chirva.localdomain Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maurizio Lombardi authored
[ Upstream commit f852c596 ] The sdebug_q_arr pointer must be freed when the module is unloaded. $ cat /sys/kernel/debug/kmemleak unreferenced object 0xffff888e1cfb0000 (size 4096): comm "modprobe", pid 165555, jiffies 4325987516 (age 685.194s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000458f4f5d>] 0xffffffffc06702d9 [<000000003edc4b1f>] do_one_initcall+0xe9/0x57d [<00000000da7d518c>] do_init_module+0x1d1/0x6f0 [<000000009a6a9248>] load_module+0x36bd/0x4f50 [<00000000ddb0c3ce>] __do_sys_init_module+0x1db/0x260 [<000000009532db57>] do_syscall_64+0xa5/0x420 [<000000002916b13d>] entry_SYSCALL_64_after_hwframe+0x6a/0xdf Fixes: 87c715dc ("scsi: scsi_debug: Add per_host_store option") Link: https://lore.kernel.org/r/20210208111734.34034-1-mlombard@redhat.com Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Florian Westphal authored
[ Upstream commit 07998281 ] The origin skip check needs to re-test the zone. Else, we might skip a colliding tuple in the reply direction. This only occurs when using 'directional zones' where origin tuples reside in different zones but the reply tuples share the same zone. This causes the new conntrack entry to be dropped at confirmation time because NAT clash resolution was elided. Fixes: 4e35c1cb ("netfilter: nf_nat: skip nat clash resolution for same-origin entries") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sukadev Bhattiprolu authored
[ Upstream commit ef66a1ea ] Normally we clear the failover_pending flag when processing the reset. But if we are unable to schedule a failover reset we must clear the flag ourselves. We could fail to schedule the reset if we are in PROBING state (eg: when booting via kexec) or because we could not allocate memory. Thanks to Cris Forno for helping isolate the problem and for testing. Fixes: 1d850493 ("powerpc/vnic: Extend "failover pending" window") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Tested-by: Cristobal Forno <cforno12@linux.ibm.com> Link: https://lore.kernel.org/r/20210203050802.680772-1-sukadev@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Mohammad Athari Bin Ismail authored
[ Upstream commit f317e2ea ] When disable CBS, mode_to_use parameter is not updated even the operation mode of Tx Queue is changed to Data Centre Bridging (DCB). Therefore, when tc_setup_cbs() function is called to re-enable CBS, the operation mode of Tx Queue remains at DCB, which causing CBS fails to work. This patch updates the value of mode_to_use parameter to MTL_QUEUE_DCB after operation mode of Tx Queue is changed to DCB in stmmac_dma_qmode() callback function. Fixes: 1f705bc6 ("net: stmmac: Add support for CBS QDISC") Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: Song, Yoong Siang <yoong.siang.song@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/1612447396-20351-1-git-send-email-yoong.siang.song@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vadim Fedorenko authored
[ Upstream commit 647b8dd5 ] PACKET_TX_TIMESTAMP is defined in if_packet.h but it is not included in test. Include it instead of <netpacket/packet.h> otherwise the error of redefinition arrives. Also fix the compiler warning about ambiguous control flow by adding explicit braces. Fixes: 8fe2f761 ("net-timestamp: expand documentation") Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/1612461034-24524-1-git-send-email-vfedorenko@novek.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit 07bf34a5 ] Michael tried to enable Advanced Error Reporting through the ENETC's Root Complex Event Collector, and the system started spitting out single bit correctable ECC errors coming from the ENETC interfaces: pcieport 0000:00:1f.0: AER: Multiple Corrected error received: 0000:00:00.0 fsl_enetc 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID) fsl_enetc 0000:00:00.0: device [1957:e100] error status/mask=00004000/00000000 fsl_enetc 0000:00:00.0: [14] CorrIntErr fsl_enetc 0000:00:00.1: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID) fsl_enetc 0000:00:00.1: device [1957:e100] error status/mask=00004000/00000000 fsl_enetc 0000:00:00.1: [14] CorrIntErr Further investigating the port correctable memory error detect register (PCMEDR) shows that these AER errors have an associated SOURCE_ID of 6 (RFS/RSS): $ devmem 0x1f8010e10 32 0xC0000006 $ devmem 0x1f8050e10 32 0xC0000006 Discussion with the hardware design engineers reveals that on LS1028A, the hardware does not do initialization of that RFS/RSS memory, and that software should clear/initialize the entire table before starting to operate. That comes as a bit of a surprise, since the driver does not do initialization of the RFS memory. Also, the initialization of the Receive Side Scaling is done only partially. Even though the entire ENETC IP has a single shared flow steering memory, the flow steering service should returns matches only for TCAM entries that are within the range of the Station Interface that is doing the search. Therefore, it should be sufficient for a Station Interface to initialize all of its own entries in order to avoid any ECC errors, and only the Station Interfaces in use should need initialization. There are Physical Station Interfaces associated with PCIe PFs and Virtual Station Interfaces associated with PCIe VFs. We let the PF driver initialize the entire port's memory, which includes the RFS entries which are going to be used by the VF. Reported-by: Michael Walle <michael@walle.cc> Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20210204134511.2640309-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Andrea Parri (Microsoft) authored
[ Upstream commit 12bc8dfb ] Commit 44144185 ("hv_netvsc: Add validation for untrusted Hyper-V values") added validation to rndis_filter_receive_data() (and rndis_filter_receive()) which introduced NVSP_STAT_FAIL-scenarios where the count is not updated/reset. Fix this omission, and prevent similar scenarios from occurring in the future. Reported-by: Juan Vazquez <juvazq@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Fixes: 44144185 ("hv_netvsc: Add validation for untrusted Hyper-V values") Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20210203113602.558916-1-parri.andrea@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Alex Elder authored
[ Upstream commit 1d23a56b ] In gsi_channel_setup(), we check to see if the configuration data contains any information about channels that are not supported by the hardware. If one is found, we abort the setup process, but the error code (ret) is not set in this case. Fix this bug. Fixes: 650d1603 ("soc: qcom: ipa: the generic software interface") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20210204010655.15619-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Xie He authored
[ Upstream commit 81b8be68 ] It's not meaningful to pass on LAPB error codes to HDLC code or other parts of the system, because they will not understand the error codes. Instead, use system-wide recognizable error codes. Fixes: f362e5fe ("wan/hdlc_x25: make lapb params configurable") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/20210203071541.86138-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Juergen Gross authored
[ Upstream commit ec7d8e7d ] Since commit 23025393 ("xen/netback: use lateeoi irq binding") xenvif_rx_ring_slots_available() is no longer called only from the rx queue kernel thread, so it needs to access the rx queue with the associated queue held. Reported-by: Igor Druzhinin <igor.druzhinin@citrix.com> Fixes: 23025393 ("xen/netback: use lateeoi irq binding") Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Wei Liu <wl@xen.org> Link: https://lore.kernel.org/r/20210202070938.7863-1-jgross@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sven Auhagen authored
[ Upstream commit 8d6bca15 ] When updating the tcp or udp header checksum on port nat the function inet_proto_csum_replace2 with the last parameter pseudohdr as true. This leads to an error in the case that GRO is used and packets are split up in GSO. The tcp or udp checksum of all packets is incorrect. The error is probably masked due to the fact the most network driver implement tcp/udp checksum offloading. It also only happens when GRO is applied and not on single packets. The error is most visible when using a pppoe connection which is not triggering the tcp/udp checksum offload. Fixes: ac2a6666 ("netfilter: add generic flow table infrastructure") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Pablo Neira Ayuso authored
[ Upstream commit 767d1216 ] Although hooks are released via call_rcu(), chain and rule objects are immediately released while packets are still walking over these bits. This patch adds the .pre_exit callback which is invoked before synchronize_rcu() in the netns framework to stay safe. Remove a comment which is not valid anymore since the core does not use synchronize_net() anymore since 8c873e21 ("netfilter: core: free hooks with call_rcu"). Suggested-by: Florian Westphal <fw@strlen.de> Fixes: df05ef87 ("netfilter: nf_tables: release objects on netns destruction") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Fabian Frederick authored
[ Upstream commit a3005b0f ] use date %Y instead of %G to read current year Problem appeared when running lkp-tests on 01/01/2021 Fixes: 48d072c4 ("selftests: netfilter: add time counter check") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jozsef Kadlecsik authored
[ Upstream commit b1bdde33 ] When both --reap and --update flag are specified, there's a code path at which the entry to be updated is reaped beforehand, which then leads to kernel crash. Reap only entries which won't be updated. Fixes kernel bugzilla #207773. Link: https://bugzilla.kernel.org/show_bug.cgi?id=207773 Reported-by: Reindl Harald <h.reindl@thelounge.net> Fixes: 0079c5ae ("netfilter: xt_recent: add an entry reaper") Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Bui Quang Minh authored
[ Upstream commit 6183f4d3 ] On 32-bit architecture, roundup_pow_of_two() can return 0 when the argument has upper most bit set due to resulting 1UL << 32. Add a check for this case. Fixes: d5a3b1f6 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210127063653.3576-1-minhquangbui99@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Alexei Starovoitov authored
[ Upstream commit 548f1191 ] The commit 0d00449c ("x86: Replace ist_enter() with nmi_enter()") converted do_int3 handler to be "NMI-like". That made old if (in_nmi()) check abort execution of bpf programs attached to kprobe when kprobe is firing via int3 (For example when kprobe is placed in the middle of the function). Remove the check to restore user visible behavior. Fixes: 0d00449c ("x86: Replace ist_enter() with nmi_enter()") Reported-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/bpf/20210203070636.70926-1-alexei.starovoitov@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dave Jiang authored
[ Upstream commit 89e3becd ] Add device state check before executing command. Without the check the command can be issued while device is in halt state and causes the driver to block while waiting for the completion of the command. Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Fixes: 0d5c10b4 ("dmaengine: idxd: add work queue drain support") Link: https://lore.kernel.org/r/161219313921.2976211.12222625226450097465.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maxime Ripard authored
[ Upstream commit facd93f4 ] Commit 0a038c1c ("drm/vc4: Move LBM creation out of vc4_plane_mode_set()") changed the LBM allocation logic from first allocating the LBM memory for the plane to running mode_set, adding a gap in the LBM, and then running the dlist allocation filling that gap. The gap was introduced by incrementing the dlist array index, but was never checking whether or not we were over the array length, leading eventually to memory corruptions if we ever crossed this limit. vc4_dlist_write had that logic though, and was reallocating a larger dlist array when reaching the end of the buffer. Let's share the logic between both functions. Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Eric Anholt <eric@anholt.net> Fixes: 0a038c1c ("drm/vc4: Move LBM creation out of vc4_plane_mode_set()") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129160647.128373-1-maxime@cerno.tech Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Lorenzo Bianconi authored
[ Upstream commit 93a1d479 ] Fix a memory leak in mt76_add_fragment routine returning the buffer to the page_frag_cache when we receive a new fragment and the skb_shared_info frag array is full. Fixes: b102f0c5 ("mt76: fix array overflow on receiving too many fragments for a packet") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/4f9dd73407da88b2a552517ce8db242d86bf4d5c.1611616130.git.lorenzo@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Arnd Bergmann authored
[ Upstream commit b64acb28 ] When CONFIG_ATH9K is built-in but LED support is in a loadable module, both ath9k drivers fails to link: x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_deinit_leds': gpio.c:(.text+0x36): undefined reference to `led_classdev_unregister' x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_init_leds': gpio.c:(.text+0x179): undefined reference to `led_classdev_register_ext' The problem is that the 'imply' keyword does not enforce any dependency but is only a weak hint to Kconfig to enable another symbol from a defconfig file. Change imply to a 'depends on LEDS_CLASS' that prevents the incorrect configuration but still allows building the driver without LED support. The 'select MAC80211_LEDS' is now ensures that the LED support is actually used if it is present, and the added Kconfig dependency on MAC80211_LEDS ensures that it cannot be enabled manually when it has no effect. Fixes: 197f466e ("ath9k_htc: Do not select MAC80211_LEDS by default") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210125113654.2408057-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dave Jiang authored
[ Upstream commit f5cc9ace ] Nikhil reported the misc interrupt handler can sometimes miss handling the command interrupt when an error interrupt happens near the same time. Have the irq handling thread continue to process the misc interrupts until all interrupts are processed. This is a low usage interrupt and is not expected to handle high volume traffic. Therefore there is no concern of this thread running for a long time. Fixes: 0d5c10b4 ("dmaengine: idxd: add work queue drain support") Reported-by: Nikhil Rao <nikhil.rao@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161074755329.2183844.13295528344116907983.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chen Zhou authored
[ Upstream commit 61e960b0 ] When mounting a cgroup hierarchy with disabled controller in cgroup v1, all available controllers will be attached. For example, boot with cgroup_no_v1=cpu or cgroup_disable=cpu, and then mount with "mount -t cgroup -ocpu cpu /sys/fs/cgroup/cpu", then all enabled controllers will be attached except cpu. Fix this by adding disabled controller check in cgroup1_parse_param(). If the specified controller is disabled, just return error with information "Disabled controller xx" rather than attaching all the other enabled controllers. Fixes: f5dfb531 ("cgroup: take options parsing into ->parse_monolithic()") Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Reviewed-by: Zefan Li <lizefan.x@bytedance.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Paolo Bonzini authored
[ Upstream commit c1c35cf7 ] If not in long mode, the low bits of CR3 are reserved but not enforced to be zero, so remove those checks. If in long mode, however, the MBZ bits extend down to the highest physical address bit of the guest, excluding the encryption bit. Make the checks consistent with the above, and match them between nested_vmcb_checks and KVM_SET_SREGS. Cc: stable@vger.kernel.org Fixes: 761e4169 ("KVM: nSVM: Check that MBZ bits in CR3 and CR4 are not set on vmrun of nested guests") Fixes: a780a3ea ("KVM: X86: Fix reserved bits check for MOV to CR3") Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Mark Rutland authored
commit 3f618ab3 upstream. When building with KASAN and LKDTM, clang may implictly generate an asan.module_ctor function in the LKDTM rodata object. The Makefile moves the lkdtm_rodata_do_nothing() function into .rodata by renaming the file's .text section to .rodata, and consequently also moves the ctor function into .rodata, leading to a boot time crash (splat below) when the ctor is invoked by do_ctors(). Let's prevent this by marking the function as noinstr rather than notrace, and renaming the file's .noinstr.text to .rodata. Marking the function as noinstr will prevent tracing and kprobes, and will inhibit any undesireable compiler instrumentation. The ctor function (if any) will be placed in .text and will work correctly. Example splat before this patch is applied: [ 0.916359] Unable to handle kernel execute from non-executable memory at virtual address ffffa0006b60f5ac [ 0.922088] Mem abort info: [ 0.922828] ESR = 0x8600000e [ 0.923635] EC = 0x21: IABT (current EL), IL = 32 bits [ 0.925036] SET = 0, FnV = 0 [ 0.925838] EA = 0, S1PTW = 0 [ 0.926714] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000427b3000 [ 0.928489] [ffffa0006b60f5ac] pgd=000000023ffff003, p4d=000000023ffff003, pud=000000023fffe003, pmd=0068000042000f01 [ 0.931330] Internal error: Oops: 8600000e [#1] PREEMPT SMP [ 0.932806] Modules linked in: [ 0.933617] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-rc7 #2 [ 0.935620] Hardware name: linux,dummy-virt (DT) [ 0.936924] pstate: 40400005 (nZcv daif +PAN -UAO -TCO BTYPE=--) [ 0.938609] pc : asan.module_ctor+0x0/0x14 [ 0.939759] lr : do_basic_setup+0x4c/0x70 [ 0.940889] sp : ffff27b600177e30 [ 0.941815] x29: ffff27b600177e30 x28: 0000000000000000 [ 0.943306] x27: 0000000000000000 x26: 0000000000000000 [ 0.944803] x25: 0000000000000000 x24: 0000000000000000 [ 0.946289] x23: 0000000000000001 x22: 0000000000000000 [ 0.947777] x21: ffffa0006bf4a890 x20: ffffa0006befb6c0 [ 0.949271] x19: ffffa0006bef9358 x18: 0000000000000068 [ 0.950756] x17: fffffffffffffff8 x16: 0000000000000000 [ 0.952246] x15: 0000000000000000 x14: 0000000000000000 [ 0.953734] x13: 00000000838a16d5 x12: 0000000000000001 [ 0.955223] x11: ffff94000da74041 x10: dfffa00000000000 [ 0.956715] x9 : 0000000000000000 x8 : ffffa0006b60f5ac [ 0.958199] x7 : f9f9f9f9f9f9f9f9 x6 : 000000000000003f [ 0.959683] x5 : 0000000000000040 x4 : 0000000000000000 [ 0.961178] x3 : ffffa0006bdc15a0 x2 : 0000000000000005 [ 0.962662] x1 : 00000000000000f9 x0 : ffffa0006bef9350 [ 0.964155] Call trace: [ 0.964844] asan.module_ctor+0x0/0x14 [ 0.965895] kernel_init_freeable+0x158/0x198 [ 0.967115] kernel_init+0x14/0x19c [ 0.968104] ret_from_fork+0x10/0x30 [ 0.969110] Code: 00000003 00000000 00000000 00000000 (00000000) [ 0.970815] ---[ end trace b5339784e20d015c ]--- Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kees Cook <keescook@chromium.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20201207170533.10738-1-mark.rutland@arm.com Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Borislav Petkov authored
[ Upstream commit 816ef8d7 ] With CONFIG_X86_5LEVEL, CONFIG_UBSAN and CONFIG_UBSAN_UNSIGNED_OVERFLOW enabled, clang fails the build with x86_64-linux-ld: arch/x86/platform/efi/efi_64.o: in function `efi_sync_low_kernel_mappings': efi_64.c:(.text+0x22c): undefined reference to `__compiletime_assert_354' which happens due to -fsanitize=unsigned-integer-overflow being enabled: -fsanitize=unsigned-integer-overflow: Unsigned integer overflow, where the result of an unsigned integer computation cannot be represented in its type. Unlike signed integer overflow, this is not undefined behavior, but it is often unintentional. This sanitizer does not check for lossy implicit conversions performed before such a computation (see -fsanitize=implicit-conversion). and that fires when the (intentional) EFI_VA_START/END defines overflow an unsigned long, leading to the assertion expressions not getting optimized away (on GCC they do)... However, those checks are superfluous: the runtime services mapping code already makes sure the ranges don't overshoot EFI_VA_END as the EFI mapping range is hardcoded. On each runtime services call, it is switched to the EFI-specific PGD and even if mappings manage to escape that last PGD, this won't remain unnoticed for long. So rip them out. See https://github.com/ClangBuiltLinux/linux/issues/256 for more info. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: http://lkml.kernel.org/r/20210107223424.4135538-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Thomas Gleixner authored
[ Upstream commit 2452483d ] This reverts commit 1abdfe70 . This change is broken and not solving any problem it claims to solve. Robin reported that cpumask_local_spread() now returns any cpu out of cpu_possible_mask in case that NOHZ_FULL is disabled (runtime or compile time). It can also return any offline or not-present CPU in the housekeeping mask. Before that it was returning a CPU out of online_cpu_mask. While the function is racy against CPU hotplug if the caller does not protect against it, the actual use cases are not caring much about it as they use it mostly as hint for: - the user space affinity hint which is unused by the kernel - memory node selection which is just suboptimal - network queue affinity which might fail but is handled gracefully But the occasional fail vs. hotplug is very different from returning anything from possible_cpu_mask which can have a large amount of offline CPUs obviously. The changelog of the commit claims: "The current implementation of cpumask_local_spread() does not respect the isolated CPUs, i.e., even if a CPU has been isolated for Real-Time task, it will return it to the caller for pinning of its IRQ threads. Having these unwanted IRQ threads on an isolated CPU adds up to a latency overhead." The only correct part of this changelog is: "The current implementation of cpumask_local_spread() does not respect the isolated CPUs." Everything else is just disjunct from reality. Reported-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: abelits@marvell.com Cc: davem@davemloft.net Link: https://lore.kernel.org/r/87y2g26tnt.fsf@nanos.tec.linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nathan Chancellor authored
[ Upstream commit 28abcc96 ] When building ARCH=mips 32r2el_defconfig with CONFIG_UBSAN_ALIGNMENT: ld.lld: error: undefined symbol: __ubsan_handle_alignment_assumption referenced by slab.h:557 (include/linux/slab.h:557) main.o:(do_initcalls) in archive init/built-in.a referenced by slab.h:448 (include/linux/slab.h:448) do_mounts_rd.o:(rd_load_image) in archive init/built-in.a referenced by slab.h:448 (include/linux/slab.h:448) do_mounts_rd.o:(identify_ramdisk_image) in archive init/built-in.a referenced 1579 more times Implement this for the kernel based on LLVM's handleAlignmentAssumptionImpl because the kernel is not linked against the compiler runtime. Link: https://github.com/ClangBuiltLinux/linux/issues/1245 Link: https://github.com/llvm/llvm-project/blob/llvmorg-11.0.1/compiler-rt/lib/ubsan/ubsan_handlers.cpp#L151-L190 Link: https://lkml.kernel.org/r/20210127224451.2587372-1-nathan@kernel.org Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Russell King authored
[ Upstream commit 4d62e81b ] Giancarlo Ferrari reports the following oops while trying to use kexec: Unable to handle kernel paging request at virtual address 80112f38 pgd = fd7ef03e [80112f38] *pgd=0001141e(bad) Internal error: Oops: 80d [#1] PREEMPT SMP ARM ... This is caused by machine_kexec() trying to set the kernel text to be read/write, so it can poke values into the relocation code before copying it - and an interrupt occuring which changes the page tables. The subsequent writes then hit read-only sections that trigger a data abort resulting in the above oops. Fix this by copying the relocation code, and then writing the variables into the destination, thereby avoiding the need to make the kernel text read/write. Reported-by: Giancarlo Ferrari <giancarlo.ferrari89@gmail.com> Tested-by: Giancarlo Ferrari <giancarlo.ferrari89@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Russell King authored
[ Upstream commit 9c698bff ] Ensure that the signal page contains our poison instruction to increase the protection against ROP attacks and also contains well defined contents. Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Arnd Bergmann authored
[ Upstream commit efe6e306 ] ARM randconfig builds with lld sometimes show a build failure from kallsyms: Inconsistent kallsyms data Try make KALLSYMS_EXTRA_PASS=1 as a workaround The problem is the veneers/thunks getting added by the linker extend the symbol table, which in turn leads to more veneers being needed, so it may take a few extra iterations to converge. This bug has been fixed multiple times before, but comes back every time a new symbol name is used. lld uses a different set of identifiers from ld.bfd, so the additional ones need to be added as well. I looked through the sources and found that arm64 and mips define similar prefixes, so I'm adding those as well, aside from the ones I observed. I'm not sure about powerpc64, which seems to already be handled through a section match, but if it comes back, the "__long_branch_" and "__plt_" prefixes would have to get added as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Alexandre Belloni authored
[ Upstream commit 5638159f ] This reverts commit c17e9377 . The lpc32xx clock driver is not able to actually change the PLL rate as this would require reparenting ARM_CLK, DDRAM_CLK, PERIPH_CLK to SYSCLK, then stop the PLL, update the register, restart the PLL and wait for the PLL to lock and finally reparent ARM_CLK, DDRAM_CLK, PERIPH_CLK to HCLK PLL. Currently, the HCLK driver simply updates the registers but this has no real effect and all the clock rate calculation end up being wrong. This is especially annoying for the peripheral (e.g. UARTs, I2C, SPI). Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20210203090320.GA3760268@piout.net ' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Lin Feng authored
[ Upstream commit 388c705b ] This reverts commit 6d4d2735 . bfq.limit_depth passes word_depths[] as shallow_depth down to sbitmap core sbitmap_get_shallow, which uses just the number to limit the scan depth of each bitmap word, formula: scan_percentage_for_each_word = shallow_depth / (1 << sbimap->shift) * 100% That means the comments's percentiles 50%, 75%, 18%, 37% of bfq are correct. But after commit patch 'bfq: Fix computation of shallow depth', we use sbitmap.depth instead, as a example in following case: sbitmap.depth = 256, map_nr = 4, shift = 6; sbitmap_word.depth = 64. The resulsts of computed bfqd->word_depths[] are {128, 192, 48, 96}, and three of the numbers exceed core dirver's 'sbitmap_word.depth=64' limit nothing. Signed-off-by: Lin Feng <linf@wangsu.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Alexandre Ghiti authored
[ Upstream commit 2ab54382 ] virt_addr_valid macro checks that a virtual address is valid, ie that the address belongs to the linear mapping and that the corresponding physical page exists. Add the missing check that ensures the virtual address belongs to the linear mapping, otherwise __virt_to_phys, when compiled with CONFIG_DEBUG_VIRTUAL enabled, raises a WARN that is interpreted as a kernel bug by syzbot. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Victor Lu authored
[ Upstream commit 8e92bb0f ] [why] An old dc_sink state is causing a memory leak because it is missing a dc_sink_release before a new dc_sink is assigned back to aconnector->dc_sink. [how] Decrement the dc_sink refcount before reassigning it to a new dc_sink. Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Victor Lu authored
[ Upstream commit 2abaa323 ] [why] drm_atomic_commit was changed so that the caller must free their drm_atomic_state reference on successes. [how] Add drm_atomic_commit_put after drm_atomic_commit call in dm_force_atomic_commit. Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Victor Lu authored
[ Upstream commit 3ddc818d ] [why] prev_sink is not used anywhere else in the function and the reference to it from dc_link is replaced with a new dc_sink. [how] Change dc_sink_retain(prev_sink) to dc_sink_release(prev_sink). Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Mikita Lipski authored
[ Upstream commit 58180a0c ] [why] Need to unassign DSC from pipes that are not using it so other pipes can acquire it. That is needed for asic's that have unmatching number of DSC engines from the number of pipes. [how] Before acquiring dsc to stream resources, first remove it. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Eryk Brol <Eryk.Brol@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sung Lee authored
[ Upstream commit 1622711b ] [WHY] When enabling HDMI on ComboPHY, there are not enough clock sources to complete display detection. [HOW] Initialize more clock sources. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
George Shen authored
[ Upstream commit 2b6b7ab4 ] [Why] The translation between the DPCD value and the specified AUX_RD_INTERVAL in the DP spec do not match. [How] Update values to match the spec. Signed-off-by: George Shen <george.shen@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-