Skip to content
rk3399.dtsi 31.4 KiB
Newer Older
/*
 * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This library is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This library is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

#include <dt-bindings/clock/rk3399-cru.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/thermal/thermal.h>

/ {
	compatible = "rockchip,rk3399";

	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	aliases {
		i2c0 = &i2c0;
		i2c1 = &i2c1;
		i2c2 = &i2c2;
		i2c3 = &i2c3;
		i2c4 = &i2c4;
		i2c5 = &i2c5;
		i2c6 = &i2c6;
		i2c7 = &i2c7;
		i2c8 = &i2c8;
		serial0 = &uart0;
		serial1 = &uart1;
		serial2 = &uart2;
		serial3 = &uart3;
		serial4 = &uart4;
	};

	cpus {
		#address-cells = <2>;
		#size-cells = <0>;

		cpu-map {
			cluster0 {
				core0 {
					cpu = <&cpu_l0>;
				};
				core1 {
					cpu = <&cpu_l1>;
				};
				core2 {
					cpu = <&cpu_l2>;
				};
				core3 {
					cpu = <&cpu_l3>;
				};
			};

			cluster1 {
				core0 {
					cpu = <&cpu_b0>;
				};
				core1 {
					cpu = <&cpu_b1>;
				};
			};
		};

		cpu_l0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a53", "arm,armv8";
			reg = <0x0 0x0>;
			enable-method = "psci";
			#cooling-cells = <2>; /* min followed by max */
			clocks = <&cru ARMCLKL>;
		};

		cpu_l1: cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a53", "arm,armv8";
			reg = <0x0 0x1>;
			enable-method = "psci";
			clocks = <&cru ARMCLKL>;
		};

		cpu_l2: cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a53", "arm,armv8";
			reg = <0x0 0x2>;
			enable-method = "psci";
			clocks = <&cru ARMCLKL>;
		};

		cpu_l3: cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a53", "arm,armv8";
			reg = <0x0 0x3>;
			enable-method = "psci";
			clocks = <&cru ARMCLKL>;
		};

		cpu_b0: cpu@100 {
			device_type = "cpu";
			compatible = "arm,cortex-a72", "arm,armv8";
			reg = <0x0 0x100>;
			enable-method = "psci";
			#cooling-cells = <2>; /* min followed by max */
			clocks = <&cru ARMCLKB>;
		};

		cpu_b1: cpu@101 {
			device_type = "cpu";
			compatible = "arm,cortex-a72", "arm,armv8";
			reg = <0x0 0x101>;
			enable-method = "psci";
			clocks = <&cru ARMCLKB>;
		};
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
	};

	xin24m: xin24m {
		compatible = "fixed-clock";
		clock-frequency = <24000000>;
		clock-output-names = "xin24m";
		#clock-cells = <0>;
	};

	amba {
		compatible = "arm,amba-bus";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		dmac_bus: dma-controller@ff6d0000 {
			compatible = "arm,pl330", "arm,primecell";
			reg = <0x0 0xff6d0000 0x0 0x4000>;
			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
			#dma-cells = <1>;
			clocks = <&cru ACLK_DMAC0_PERILP>;
			clock-names = "apb_pclk";
		};

		dmac_peri: dma-controller@ff6e0000 {
			compatible = "arm,pl330", "arm,primecell";
			reg = <0x0 0xff6e0000 0x0 0x4000>;
			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
			#dma-cells = <1>;
			clocks = <&cru ACLK_DMAC1_PERILP>;
			clock-names = "apb_pclk";
		};
	};

	sdio0: dwmmc@fe310000 {
		compatible = "rockchip,rk3399-dw-mshc",
			     "rockchip,rk3288-dw-mshc";
		reg = <0x0 0xfe310000 0x0 0x4000>;
		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
		clock-freq-min-max = <400000 150000000>;
		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
		fifo-depth = <0x100>;
		status = "disabled";
	};

	sdmmc: dwmmc@fe320000 {
		compatible = "rockchip,rk3399-dw-mshc",
			     "rockchip,rk3288-dw-mshc";
		reg = <0x0 0xfe320000 0x0 0x4000>;
		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
		clock-freq-min-max = <400000 150000000>;
		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
		fifo-depth = <0x100>;
		status = "disabled";
	};

	sdhci: sdhci@fe330000 {
		compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
		reg = <0x0 0xfe330000 0x0 0x10000>;
		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
		assigned-clocks = <&cru SCLK_EMMC>;
		assigned-clock-rates = <200000000>;
		clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
		clock-names = "clk_xin", "clk_ahb";
		phys = <&emmc_phy>;
		phy-names = "phy_arasan";
		status = "disabled";
	};

	usb_host0_ehci: usb@fe380000 {
		compatible = "generic-ehci";
		reg = <0x0 0xfe380000 0x0 0x20000>;
		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
		clock-names = "hclk_host0", "hclk_host0_arb";
		status = "disabled";
	};

	usb_host0_ohci: usb@fe3a0000 {
		compatible = "generic-ohci";
		reg = <0x0 0xfe3a0000 0x0 0x20000>;
		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
		clock-names = "hclk_host0", "hclk_host0_arb";
		status = "disabled";
	};

	usb_host1_ehci: usb@fe3c0000 {
		compatible = "generic-ehci";
		reg = <0x0 0xfe3c0000 0x0 0x20000>;
		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
		clock-names = "hclk_host1", "hclk_host1_arb";
		status = "disabled";
	};

	usb_host1_ohci: usb@fe3e0000 {
		compatible = "generic-ohci";
		reg = <0x0 0xfe3e0000 0x0 0x20000>;
		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
		clock-names = "hclk_host1", "hclk_host1_arb";
		status = "disabled";
	};

	gic: interrupt-controller@fee00000 {
		compatible = "arm,gic-v3";
		#interrupt-cells = <3>;
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;
		interrupt-controller;

		reg = <0x0 0xfee00000 0 0x10000>, /* GICD */
		      <0x0 0xfef00000 0 0xc0000>, /* GICR */
		      <0x0 0xfff00000 0 0x10000>, /* GICC */
		      <0x0 0xfff10000 0 0x10000>, /* GICH */
		      <0x0 0xfff20000 0 0x10000>; /* GICV */
		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
		its: interrupt-controller@fee20000 {
			compatible = "arm,gic-v3-its";
			msi-controller;
			reg = <0x0 0xfee20000 0x0 0x20000>;
		};
	};

	i2c1: i2c@ff110000 {
		compatible = "rockchip,rk3399-i2c";
		reg = <0x0 0xff110000 0x0 0x1000>;
		assigned-clocks = <&cru SCLK_I2C1>;
		assigned-clock-rates = <200000000>;
		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
		clock-names = "i2c", "pclk";
		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c1_xfer>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	i2c2: i2c@ff120000 {
		compatible = "rockchip,rk3399-i2c";
		reg = <0x0 0xff120000 0x0 0x1000>;
		assigned-clocks = <&cru SCLK_I2C2>;
		assigned-clock-rates = <200000000>;
		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
		clock-names = "i2c", "pclk";
		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c2_xfer>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	i2c3: i2c@ff130000 {
		compatible = "rockchip,rk3399-i2c";
		reg = <0x0 0xff130000 0x0 0x1000>;
		assigned-clocks = <&cru SCLK_I2C3>;
		assigned-clock-rates = <200000000>;
		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
		clock-names = "i2c", "pclk";
		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c3_xfer>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	i2c5: i2c@ff140000 {
		compatible = "rockchip,rk3399-i2c";
		reg = <0x0 0xff140000 0x0 0x1000>;
		assigned-clocks = <&cru SCLK_I2C5>;
		assigned-clock-rates = <200000000>;
		clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>;
		clock-names = "i2c", "pclk";
		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c5_xfer>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	i2c6: i2c@ff150000 {
		compatible = "rockchip,rk3399-i2c";
		reg = <0x0 0xff150000 0x0 0x1000>;
		assigned-clocks = <&cru SCLK_I2C6>;
		assigned-clock-rates = <200000000>;
		clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>;
		clock-names = "i2c", "pclk";
		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c6_xfer>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	i2c7: i2c@ff160000 {
		compatible = "rockchip,rk3399-i2c";
		reg = <0x0 0xff160000 0x0 0x1000>;
		assigned-clocks = <&cru SCLK_I2C7>;
		assigned-clock-rates = <200000000>;
		clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>;
		clock-names = "i2c", "pclk";
		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c7_xfer>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	uart0: serial@ff180000 {
		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
		reg = <0x0 0xff180000 0x0 0x100>;
		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
		clock-names = "baudclk", "apb_pclk";
		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
		reg-shift = <2>;
		reg-io-width = <4>;
		pinctrl-names = "default";
		pinctrl-0 = <&uart0_xfer>;
		status = "disabled";
	};

	uart1: serial@ff190000 {
		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
		reg = <0x0 0xff190000 0x0 0x100>;
		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
		clock-names = "baudclk", "apb_pclk";
		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
		reg-shift = <2>;
		reg-io-width = <4>;
		pinctrl-names = "default";
		pinctrl-0 = <&uart1_xfer>;
		status = "disabled";
	};

	uart2: serial@ff1a0000 {
		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
		reg = <0x0 0xff1a0000 0x0 0x100>;
		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
		clock-names = "baudclk", "apb_pclk";
		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
		reg-shift = <2>;
		reg-io-width = <4>;
		pinctrl-names = "default";
		pinctrl-0 = <&uart2c_xfer>;
		status = "disabled";
	};

	uart3: serial@ff1b0000 {
		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
		reg = <0x0 0xff1b0000 0x0 0x100>;
		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
		clock-names = "baudclk", "apb_pclk";
		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
		reg-shift = <2>;
		reg-io-width = <4>;
		pinctrl-names = "default";
		pinctrl-0 = <&uart3_xfer>;
		status = "disabled";
	};

	spi0: spi@ff1c0000 {
		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
		reg = <0x0 0xff1c0000 0x0 0x1000>;
		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
		clock-names = "spiclk", "apb_pclk";
		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	spi1: spi@ff1d0000 {
		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
		reg = <0x0 0xff1d0000 0x0 0x1000>;
		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
		clock-names = "spiclk", "apb_pclk";
		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	spi2: spi@ff1e0000 {
		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
		reg = <0x0 0xff1e0000 0x0 0x1000>;
		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
		clock-names = "spiclk", "apb_pclk";
		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	spi4: spi@ff1f0000 {
		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
		reg = <0x0 0xff1f0000 0x0 0x1000>;
		clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>;
		clock-names = "spiclk", "apb_pclk";
		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	spi5: spi@ff200000 {
		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
		reg = <0x0 0xff200000 0x0 0x1000>;
		clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>;
		clock-names = "spiclk", "apb_pclk";
		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	thermal-zones {
		cpu_thermal: cpu {
			polling-delay-passive = <100>;
			polling-delay = <1000>;

			thermal-sensors = <&tsadc 0>;

			trips {
				cpu_alert0: cpu_alert0 {
					temperature = <70000>;
					hysteresis = <2000>;
					type = "passive";
				};
				cpu_alert1: cpu_alert1 {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "passive";
				};
				cpu_crit: cpu_crit {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu_alert0>;
					cooling-device =
						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu_alert1>;
					cooling-device =
						<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		gpu_thermal: gpu {
			polling-delay-passive = <100>;
			polling-delay = <1000>;

			thermal-sensors = <&tsadc 1>;

			trips {
				gpu_alert0: gpu_alert0 {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "passive";
				};
				gpu_crit: gpu_crit {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&gpu_alert0>;
					cooling-device =
						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};
	};

	tsadc: tsadc@ff260000 {
		compatible = "rockchip,rk3399-tsadc";
		reg = <0x0 0xff260000 0x0 0x100>;
		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
		assigned-clocks = <&cru SCLK_TSADC>;
		assigned-clock-rates = <750000>;
		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
		clock-names = "tsadc", "apb_pclk";
		resets = <&cru SRST_TSADC>;
		reset-names = "tsadc-apb";
		rockchip,grf = <&grf>;
		rockchip,hw-tshut-temp = <95000>;
		pinctrl-names = "init", "default", "sleep";
		pinctrl-0 = <&otp_gpio>;
		pinctrl-1 = <&otp_out>;
		pinctrl-2 = <&otp_gpio>;
		#thermal-sensor-cells = <1>;
		status = "disabled";
	};

	pmugrf: syscon@ff320000 {
		compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
		reg = <0x0 0xff320000 0x0 0x1000>;
		#address-cells = <1>;
		#size-cells = <1>;

		pmu_io_domains: io-domains {
			compatible = "rockchip,rk3399-pmu-io-voltage-domain";
			status = "disabled";
		};
	};

	spi3: spi@ff350000 {
		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
		reg = <0x0 0xff350000 0x0 0x1000>;
		clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>;
		clock-names = "spiclk", "apb_pclk";
		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	uart4: serial@ff370000 {
		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
		reg = <0x0 0xff370000 0x0 0x100>;
		clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>;
		clock-names = "baudclk", "apb_pclk";
		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
		reg-shift = <2>;
		reg-io-width = <4>;
		pinctrl-names = "default";
		pinctrl-0 = <&uart4_xfer>;
		status = "disabled";
	};

	i2c0: i2c@ff3c0000 {
		compatible = "rockchip,rk3399-i2c";
		reg = <0x0 0xff3c0000 0x0 0x1000>;
		assigned-clocks = <&pmucru SCLK_I2C0_PMU>;
		assigned-clock-rates = <200000000>;
		clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>;
		clock-names = "i2c", "pclk";
		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c0_xfer>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	i2c4: i2c@ff3d0000 {
		compatible = "rockchip,rk3399-i2c";
		reg = <0x0 0xff3d0000 0x0 0x1000>;
		assigned-clocks = <&pmucru SCLK_I2C4_PMU>;
		assigned-clock-rates = <200000000>;
		clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>;
		clock-names = "i2c", "pclk";
		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c4_xfer>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	i2c8: i2c@ff3e0000 {
		compatible = "rockchip,rk3399-i2c";
		reg = <0x0 0xff3e0000 0x0 0x1000>;
		assigned-clocks = <&pmucru SCLK_I2C8_PMU>;
		assigned-clock-rates = <200000000>;
		clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>;
		clock-names = "i2c", "pclk";
		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c8_xfer>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	pwm0: pwm@ff420000 {
		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
		reg = <0x0 0xff420000 0x0 0x10>;
		#pwm-cells = <3>;
		pinctrl-names = "default";
		pinctrl-0 = <&pwm0_pin>;
		clocks = <&pmucru PCLK_RKPWM_PMU>;
		clock-names = "pwm";
		status = "disabled";
	};

	pwm1: pwm@ff420010 {
		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
		reg = <0x0 0xff420010 0x0 0x10>;
		#pwm-cells = <3>;
		pinctrl-names = "default";
		pinctrl-0 = <&pwm1_pin>;
		clocks = <&pmucru PCLK_RKPWM_PMU>;
		clock-names = "pwm";
		status = "disabled";
	};

	pwm2: pwm@ff420020 {
		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
		reg = <0x0 0xff420020 0x0 0x10>;
		#pwm-cells = <3>;
		pinctrl-names = "default";
		pinctrl-0 = <&pwm2_pin>;
		clocks = <&pmucru PCLK_RKPWM_PMU>;
		clock-names = "pwm";
		status = "disabled";
	};

	pwm3: pwm@ff420030 {
		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
		reg = <0x0 0xff420030 0x0 0x10>;
		#pwm-cells = <3>;
		pinctrl-names = "default";
		pinctrl-0 = <&pwm3a_pin>;
		clocks = <&pmucru PCLK_RKPWM_PMU>;
		clock-names = "pwm";
		status = "disabled";
	};

	pmucru: pmu-clock-controller@ff750000 {
		compatible = "rockchip,rk3399-pmucru";
		reg = <0x0 0xff750000 0x0 0x1000>;
		#clock-cells = <1>;
		#reset-cells = <1>;
		assigned-clocks = <&pmucru PLL_PPLL>;
		assigned-clock-rates = <676000000>;
	};

	cru: clock-controller@ff760000 {
		compatible = "rockchip,rk3399-cru";
		reg = <0x0 0xff760000 0x0 0x1000>;
		#clock-cells = <1>;
		#reset-cells = <1>;
		assigned-clocks =
			<&cru PLL_GPLL>, <&cru PLL_CPLL>,
			<&cru PLL_NPLL>,
			<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
			<&cru PCLK_PERIHP>,
			<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
			<&cru PCLK_PERILP0>,
			<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>;
		assigned-clock-rates =
			 <594000000>,  <800000000>,
			<1000000000>,
			 <150000000>,   <75000000>,
			  <37500000>,
			 <100000000>,  <100000000>,
			  <50000000>,
			 <100000000>,   <50000000>;
		compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
		reg = <0x0 0xff770000 0x0 0x10000>;
		#address-cells = <1>;
		#size-cells = <1>;
		io_domains: io-domains {
			compatible = "rockchip,rk3399-io-voltage-domain";
			status = "disabled";
		};

		emmc_phy: phy@f780 {
			compatible = "rockchip,rk3399-emmc-phy";
			reg = <0xf780 0x24>;
			#phy-cells = <0>;
			status = "disabled";
		};
	};

	watchdog@ff840000 {
		compatible = "snps,dw-wdt";
		reg = <0x0 0xff840000 0x0 0x100>;
		clocks = <&cru PCLK_WDT>;
		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
	};

	spdif: spdif@ff870000 {
		compatible = "rockchip,rk3399-spdif";
		reg = <0x0 0xff870000 0x0 0x1000>;
		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
		dmas = <&dmac_bus 7>;
		dma-names = "tx";
		clock-names = "mclk", "hclk";
		clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
		pinctrl-names = "default";
		pinctrl-0 = <&spdif_bus>;
		status = "disabled";
	};

	i2s0: i2s@ff880000 {
		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
		reg = <0x0 0xff880000 0x0 0x1000>;
		rockchip,grf = <&grf>;
		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
		dmas = <&dmac_bus 0>, <&dmac_bus 1>;
		dma-names = "tx", "rx";
		clock-names = "i2s_clk", "i2s_hclk";
		clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2s0_8ch_bus>;
		status = "disabled";
	};

	i2s1: i2s@ff890000 {
		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
		reg = <0x0 0xff890000 0x0 0x1000>;
		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
		dmas = <&dmac_bus 2>, <&dmac_bus 3>;
		dma-names = "tx", "rx";
		clock-names = "i2s_clk", "i2s_hclk";
		clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2s1_2ch_bus>;
		status = "disabled";
	};

	i2s2: i2s@ff8a0000 {
		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
		reg = <0x0 0xff8a0000 0x0 0x1000>;
		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
		dmas = <&dmac_bus 4>, <&dmac_bus 5>;
		dma-names = "tx", "rx";
		clock-names = "i2s_clk", "i2s_hclk";
		clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>;
		status = "disabled";
	};

	pinctrl: pinctrl {
		compatible = "rockchip,rk3399-pinctrl";
		rockchip,grf = <&grf>;
		rockchip,pmu = <&pmugrf>;
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		gpio0: gpio0@ff720000 {
			compatible = "rockchip,gpio-bank";
			reg = <0x0 0xff720000 0x0 0x100>;
			clocks = <&pmucru PCLK_GPIO0_PMU>;
			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;

			gpio-controller;
			#gpio-cells = <0x2>;

			interrupt-controller;
			#interrupt-cells = <0x2>;
		};

		gpio1: gpio1@ff730000 {
			compatible = "rockchip,gpio-bank";
			reg = <0x0 0xff730000 0x0 0x100>;
			clocks = <&pmucru PCLK_GPIO1_PMU>;
			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;

			gpio-controller;
			#gpio-cells = <0x2>;

			interrupt-controller;
			#interrupt-cells = <0x2>;
		};

		gpio2: gpio2@ff780000 {
			compatible = "rockchip,gpio-bank";
			reg = <0x0 0xff780000 0x0 0x100>;
			clocks = <&cru PCLK_GPIO2>;
			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;

			gpio-controller;
			#gpio-cells = <0x2>;

			interrupt-controller;
			#interrupt-cells = <0x2>;
		};

		gpio3: gpio3@ff788000 {
			compatible = "rockchip,gpio-bank";
			reg = <0x0 0xff788000 0x0 0x100>;
			clocks = <&cru PCLK_GPIO3>;
			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;

			gpio-controller;
			#gpio-cells = <0x2>;

			interrupt-controller;
			#interrupt-cells = <0x2>;
		};

		gpio4: gpio4@ff790000 {
			compatible = "rockchip,gpio-bank";
			reg = <0x0 0xff790000 0x0 0x100>;
			clocks = <&cru PCLK_GPIO4>;
			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;

			gpio-controller;
			#gpio-cells = <0x2>;

			interrupt-controller;
			#interrupt-cells = <0x2>;
		};

		pcfg_pull_up: pcfg-pull-up {
			bias-pull-up;
		};

		pcfg_pull_down: pcfg-pull-down {
			bias-pull-down;
		};

		pcfg_pull_none: pcfg-pull-none {
			bias-disable;
		};

		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
			bias-disable;
			drive-strength = <12>;
		};

		pcfg_pull_up_8ma: pcfg-pull-up-8ma {
			bias-pull-up;
			drive-strength = <8>;
		};

		pcfg_pull_down_4ma: pcfg-pull-down-4ma {
			bias-pull-down;
			drive-strength = <4>;
		};

		pcfg_pull_up_2ma: pcfg-pull-up-2ma {
			bias-pull-up;
			drive-strength = <2>;
		};

		pcfg_pull_down_12ma: pcfg-pull-down-12ma {
			bias-pull-down;
			drive-strength = <12>;
		};

		pcfg_pull_none_13ma: pcfg-pull-none-13ma {
			bias-disable;
			drive-strength = <13>;
		};

		i2c0 {
			i2c0_xfer: i2c0-xfer {
				rockchip,pins =
					<1 15 RK_FUNC_2 &pcfg_pull_none>,
					<1 16 RK_FUNC_2 &pcfg_pull_none>;
			};
		};

		i2c1 {
			i2c1_xfer: i2c1-xfer {
				rockchip,pins =
					<4 2 RK_FUNC_1 &pcfg_pull_none>,
					<4 1 RK_FUNC_1 &pcfg_pull_none>;
			};
		};

		i2c2 {
			i2c2_xfer: i2c2-xfer {
				rockchip,pins =
					<2 1 RK_FUNC_2 &pcfg_pull_none_12ma>,
					<2 0 RK_FUNC_2 &pcfg_pull_none_12ma>;
			};
		};

		i2c3 {
			i2c3_xfer: i2c3-xfer {
				rockchip,pins =
					<4 17 RK_FUNC_1 &pcfg_pull_none>,
					<4 16 RK_FUNC_1 &pcfg_pull_none>;
			};
		};

		i2c4 {
			i2c4_xfer: i2c4-xfer {
				rockchip,pins =
					<1 12 RK_FUNC_1 &pcfg_pull_none>,
					<1 11 RK_FUNC_1 &pcfg_pull_none>;
			};
		};

		i2c5 {
			i2c5_xfer: i2c5-xfer {
				rockchip,pins =
					<3 11 RK_FUNC_2 &pcfg_pull_none>,
					<3 10 RK_FUNC_2 &pcfg_pull_none>;
			};
		};

		i2c6 {
			i2c6_xfer: i2c6-xfer {
				rockchip,pins =
					<2 10 RK_FUNC_2 &pcfg_pull_none>,
					<2 9 RK_FUNC_2 &pcfg_pull_none>;
			};
		};