- Nov 21, 2013
-
-
Hannes Frederic Sowa authored
This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ding Tianhong authored
bridge dev When the following commands are executed: brctl addbr br0 ifconfig br0 hw ether <addr> rmmod bridge The calltrace will occur: [ 563.312114] device eth1 left promiscuous mode [ 563.312188] br0: port 1(eth1) entered disabled state [ 563.468190] kmem_cache_destroy bridge_fdb_cache: Slab cache still has objects [ 563.468197] CPU: 6 PID: 6982 Comm: rmmod Tainted: G O 3.12.0-0.7-default+ #9 [ 563.468199] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 563.468200] 0000000000000880 ffff88010f111e98 ffffffff814d1c92 ffff88010f111eb8 [ 563.468204] ffffffff81148efd ffff88010f111eb8 0000000000000000 ffff88010f111ec8 [ 563.468206] ffffffffa062a270 ffff88010f111ed8 ffffffffa063ac76 ffff88010f111f78 [ 563.468209] Call Trace: [ 563.468218] [<ffffffff814d1c92>] dump_stack+0x6a/0x78 [ 563.468234] [<ffffffff81148efd>] kmem_cache_destroy+0xfd/0x100 [ 563.468242] [<ffffffffa062a270>] br_fdb_fini+0x10/0x20 [bridge] [ 563.468247] [<ffffffffa063ac76>] br_deinit+0x4e/0x50 [bridge] [ 563.468254] [<ffffffff810c7dc9>] SyS_delete_module+0x199/0x2b0 [ 563.468259] [<ffffffff814e0922>] system_call_fastpath+0x16/0x1b [ 570.377958] Bridge firewalling registered --------------------------- cut here ------------------------------- The reason is that when the bridge dev's address is changed, the br_fdb_change_mac_address() will add new address in fdb, but when the bridge was removed, the address entry in the fdb did not free, the bridge_fdb_cache still has objects when destroy the cache, Fix this by flushing the bridge address entry when removing the bridge. v2: according to the Toshiaki Makita and Vlad's suggestion, I only delete the vlan0 entry, it still have a leak here if the vlan id is other number, so I need to call fdb_delete_by_port(br, NULL, 1) to flush all entries whose dst is NULL for the bridge. Suggested-by:
Toshiaki Makita <toshiaki.makita1@gmail.com> Suggested-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
The following commit: b6c40d68 net: only invoke dev->change_rx_flags when device is UP tried to fix a problem with VLAN devices and promiscuouse flag setting. The issue was that VLAN device was setting a flag on an interface that was down, thus resulting in bad promiscuity count. This commit blocked flag propagation to any device that is currently down. A later commit: deede2fa vlan: Don't propagate flag changes on down interfaces fixed VLAN code to only propagate flags when the VLAN interface is up, thus fixing the same issue as above, only localized to VLAN. The problem we have now is that if we have create a complex stack involving multiple software devices like bridges, bonds, and vlans, then it is possible that the flags would not propagate properly to the physical devices. A simple examle of the scenario is the following: eth0----> bond0 ----> bridge0 ---> vlan50 If bond0 or eth0 happen to be down at the time bond0 is added to the bridge, then eth0 will never have promisc mode set which is currently required for operation as part of the bridge. As a result, packets with vlan50 will be dropped by the interface. The only 2 devices that implement the special flag handling are VLAN and DSA and they both have required code to prevent incorrect flag propagation. As a result we can remove the generic solution introduced in b6c40d68 and leave it to the individual devices to decide whether they will block flag propagation or not. Reported-by:
Stefan Priebe <s.priebe@profihost.ag> Suggested-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexei Starovoitov authored
CPUs can ask for local route via ip_route_input_noref() concurrently. if nh_rth_input is not cached yet, CPUs will proceed to allocate equivalent DSTs on 'lo' and then will try to cache them in nh_rth_input via rt_cache_route() Most of the time they succeed, but on occasion the following two lines: orig = *p; prev = cmpxchg(p, orig, rt); in rt_cache_route() do race and one of the cpus fails to complete cmpxchg. But ip_route_input_slow() doesn't check the return code of rt_cache_route(), so dst is leaking. dst_destroy() is never called and 'lo' device refcnt doesn't go to zero, which can be seen in the logs as: unregister_netdevice: waiting for lo to become free. Usage count = 1 Adding mdelay() between above two lines makes it easily reproducible. Fix it similar to nh_pcpu_rth_output case. Fixes: d2d68ba9 ("ipv4: Cache input routes in fib_info nexthops.") Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hayes Wang says: ==================== r8152 bug fixes For the patch #3, I add netif_tx_lock() before checking the netif_queue_stopped(). Besides, I add checking the skb queue length before waking the tx queue. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
The data from the hardware should be little endian. Correct the declaration. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
The maximum packet number which a tx aggregation buffer could contain is the tx_qlen. tx_qlen = buffer size / (packet size + descriptor size). If the tx buffer is empty and the queued packets are more than the maximum value which is defined above, stop the tx queue. Wake the tx queue if tx queue is stopped and the queued packets are less than tx_qlen. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Remove the code for sending the packet in the rtl8152_start_xmit(). Let rtl8152_start_xmit() to queue the packet only, and schedule a tasklet to send the queued packets. This simplify the code and make sure all the packet would be sent by the original order. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
The tx/rx would access the memory which is out of the desired range. Modify the method of checking the end of the memory to avoid it. For r8152_tx_agg_fill(), the variable remain may become negative. However, the declaration is unsigned, so the while loop wouldn't break when reaching the end of the desied memory. Although to change the declaration from unsigned to signed is enough to fix it, I also modify the checking method for safe. Replace remain = rx_buf_sz - sizeof(*tx_desc) - (u32)((void *)tx_data - agg->head); with remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head); to make sure the variable remain is always positive. Then, the overflow wouldn't happen. For rx_bottom(), the rx_desc should not be used to calculate the packet length before making sure the rx_desc is in the desired range. Change the checking to two parts. First, check the descriptor is in the memory. The other, using the descriptor to find out the packet length and check if the packet is in the memory. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Nov 20, 2013
-
-
Mahesh Rajashekhara authored
It appears that driver runs into a problem here if fibsize is too small because we allocate user_srbcmd with fibsize size only but later we access it until user_srbcmd->sg.count to copy it over to srbcmd. It is not correct to test (fibsize < sizeof(*user_srbcmd)) because this structure already includes one sg element and this is not needed for commands without data. So, we would recommend to add the following (instead of test for fibsize == 0). Signed-off-by:
Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com> Reported-by:
Nico Golde <nico@ngolde.de> Reported-by:
Fabian Yamaguchi <fabs@goesec.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Mostly these are fixes for fallout due to merge window changes, as well as cures for problems that have been with us for a much longer period of time" 1) Johannes Berg noticed two major deficiencies in our genetlink registration. Some genetlink protocols we passing in constant counts for their ops array rather than something like ARRAY_SIZE(ops) or similar. Also, some genetlink protocols were using fixed IDs for their multicast groups. We have to retain these fixed IDs to keep existing userland tools working, but reserve them so that other multicast groups used by other protocols can not possibly conflict. In dealing with these two problems, we actually now use less state management for genetlink operations and multicast groups. 2) When configuring interface hardware timestamping, fix several drivers that simply do not validate that the hwtstamp_config value is one the driver actually supports. From Ben Hutchings. 3) Invalid memory references in mwifiex driver, from Amitkumar Karwar. 4) In dev_forward_skb(), set the skb->protocol in the right order relative to skb_scrub_packet(). From Alexei Starovoitov. 5) Bridge erroneously fails to use the proper wrapper functions to make calls to netdev_ops->ndo_vlan_rx_{add,kill}_vid. Fix from Toshiaki Makita. 6) When detaching a bridge port, make sure to flush all VLAN IDs to prevent them from leaking, also from Toshiaki Makita. 7) Put in a compromise for TCP Small Queues so that deep queued devices that delay TX reclaim non-trivially don't have such a performance decrease. One particularly problematic area is 802.11 AMPDU in wireless. From Eric Dumazet. 8) Fix crashes in tcp_fastopen_cache_get(), we can see NULL socket dsts here. Fix from Eric Dumzaet, reported by Dave Jones. 9) Fix use after free in ipv6 SIT driver, from Willem de Bruijn. 10) When computing mergeable buffer sizes, virtio-net fails to take the virtio-net header into account. From Michael Dalton. 11) Fix seqlock deadlock in ip4_datagram_connect() wrt. statistic bumping, this one has been with us for a while. From Eric Dumazet. 12) Fix NULL deref in the new TIPC fragmentation handling, from Erik Hugne. 13) 6lowpan bit used for traffic classification was wrong, from Jukka Rissanen. 14) macvlan has the same issue as normal vlans did wrt. propagating LRO disabling down to the real device, fix it the same way. From Michal Kubecek. 15) CPSW driver needs to soft reset all slaves during suspend, from Daniel Mack. 16) Fix small frame pacing in FQ packet scheduler, from Eric Dumazet. 17) The xen-netfront RX buffer refill timer isn't properly scheduled on partial RX allocation success, from Ma JieYue. 18) When ipv6 ping protocol support was added, the AF_INET6 protocol initialization cleanup path on failure was borked a little. Fix from Vlad Yasevich. 19) If a socket disconnects during a read/recvmsg/recvfrom/etc that blocks we can do the wrong thing with the msg_name we write back to userspace. From Hannes Frederic Sowa. There is another fix in the works from Hannes which will prevent future problems of this nature. 20) Fix route leak in VTI tunnel transmit, from Fan Du. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) genetlink: make multicast groups const, prevent abuse genetlink: pass family to functions using groups genetlink: add and use genl_set_err() genetlink: remove family pointer from genl_multicast_group genetlink: remove genl_unregister_mc_group() hsr: don't call genl_unregister_mc_group() quota/genetlink: use proper genetlink multicast APIs drop_monitor/genetlink: use proper genetlink multicast APIs genetlink: only pass array to genl_register_family_with_ops() tcp: don't update snd_nxt, when a socket is switched from repair mode atm: idt77252: fix dev refcnt leak xfrm: Release dst if this dst is improper for vti tunnel netlink: fix documentation typo in netlink_set_err() be2net: Delete secondary unicast MAC addresses during be_close be2net: Fix unconditional enabling of Rx interface options net, virtio_net: replace the magic value ping: prevent NULL pointer dereference on write to msg_name bnx2x: Prevent "timeout waiting for state X" bnx2x: prevent CFC attention bnx2x: Prevent panic during DMAE timeout ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: "Two merge window fallout build fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: merge fix sparc64: fix build regession
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linuxLinus Torvalds authored
Pull ia64 fix from Tony Luck: "Unbreak ia64 build by avoiding circular dependency" * tag 'please-pull-fixia64' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: kernel/bounds: avoid circular dependencies in generated headers
-
Kirill A. Shutemov authored
<linux/spinlock.h> has heavy dependencies on other header files. It triggers circular dependencies in generated headers on IA64, at least: CC kernel/bounds.s In file included from /home/space/kas/git/public/linux/arch/ia64/include/asm/thread_info.h:9:0, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/ia64/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/spinlock.h:50, from kernel/bounds.c:14: /home/space/kas/git/public/linux/arch/ia64/include/asm/asm-offsets.h:1:35: fatal error: generated/asm-offsets.h: No such file or directory compilation terminated. Let's replace <linux/spinlock.h> with <linux/spinlock_types.h>, it's enough to find out size of spinlock_t. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-and-Tested-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Tony Luck <tony.luck@intel.com>
-
David S. Miller authored
Johannes Berg says: ==================== genetlink: clean up multicast group APIs The generic netlink multicast group registration doesn't have to be dynamic, and can thus be simplified just like I did with the ops. This removes some complexity in registration code. Additionally, two users of generic netlink already use multicast groups in a wrong way, add workarounds for those two to keep the userspace API working, but at the same time make them not clash with other users of multicast groups as might happen now. While making it all a bit easier, also prevent such abuse by adding checks to the APIs so each family can only use the groups it owns. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
Register generic netlink multicast groups as an array with the family and give them contiguous group IDs. Then instead of passing the global group ID to the various functions that send messages, pass the ID relative to the family - for most families that's just 0 because the only have one group. This avoids the list_head and ID in each group, adding a new field for the mcast group ID offset to the family. At the same time, this allows us to prevent abusing groups again like the quota and dropmon code did, since we can now check that a family only uses a group it owns. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
This doesn't really change anything, but prepares for the next patch that will change the APIs to pass the group ID within the family, rather than the global group ID. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
Add a static inline to generic netlink to wrap netlink_set_err() to make it easier to use here - use it in openvswitch (the only generic netlink user of netlink_set_err()). Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
There's no reason to have the family pointer there since it can just be passed internally where needed, so remove it. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
There are no users of this API remaining, and we'll soon change group registration to be static (like ops are now) Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
There's no need to unregister the multicast group if the generic netlink family is registered immediately after. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
The quota code is abusing the genetlink API and is using its family ID as the multicast group ID, which is invalid and may belong to somebody else (and likely will.) Make the quota code use the correct API, but since this is already used as-is by userspace, reserve a family ID for this code and also reserve that group ID to not break userspace assumptions. Acked-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
The drop monitor code is abusing the genetlink API and is statically using the generic netlink multicast group 1, even if that group belongs to somebody else (which it invariably will, since it's not reserved.) Make the drop monitor code use the proper APIs to reserve a group ID, but also reserve the group id 1 in generic netlink code to preserve the userspace API. Since drop monitor can be a module, don't clear the bit for it on unregistration. Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
As suggested by David Miller, make genl_register_family_with_ops() a macro and pass only the array, evaluating ARRAY_SIZE() in the macro, this is a little safer. The openvswitch has some indirection, assing ops/n_ops directly in that code. This might ultimately just assign the pointers in the family initializations, saving the struct genl_family_and_ops and code (once mcast groups are handled differently.) Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrey Vagin authored
snd_nxt must be updated synchronously with sk_send_head. Otherwise tp->packets_out may be updated incorrectly, what may bring a kernel panic. Here is a kernel panic from my host. [ 103.043194] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 103.044025] IP: [<ffffffff815aaaaf>] tcp_rearm_rto+0xcf/0x150 ... [ 146.301158] Call Trace: [ 146.301158] [<ffffffff815ab7f0>] tcp_ack+0xcc0/0x12c0 Before this panic a tcp socket was restored. This socket had sent and unsent data in the write queue. Sent data was restored in repair mode, then the socket was switched from reapair mode and unsent data was restored. After that the socket was switched back into repair mode. In that moment we had a socket where write queue looks like this: snd_una snd_nxt write_seq |_________|________| | sk_send_head After a second switching from repair mode the state of socket was changed: snd_una snd_nxt, write_seq |_________ ________| | sk_send_head This state is inconsistent, because snd_nxt and sk_send_head are not synchronized. Bellow you can find a call trace, how packets_out can be incremented twice for one skb, if snd_nxt and sk_send_head are not synchronized. In this case packets_out will be always positive, even when sk_write_queue is empty. tcp_write_wakeup skb = tcp_send_head(sk); tcp_fragment if (!before(tp->snd_nxt, TCP_SKB_CB(buff)->end_seq)) tcp_adjust_pcount(sk, skb, diff); tcp_event_new_data_sent tp->packets_out += tcp_skb_pcount(skb); I think update of snd_nxt isn't required, when a socket is switched from repair mode. Because it's initialized in tcp_connect_init. Then when a write queue is restored, snd_nxt is incremented in tcp_event_new_data_sent, so it's always is in consistent state. I have checked, that the bug is not reproduced with this patch and all tests about restoring tcp connections work fine. Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by:
Andrey Vagin <avagin@openvz.org> Acked-by:
Pavel Emelyanov <xemul@parallels.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ying Xue authored
init_card() calls dev_get_by_name() to get a network deceive. But it doesn't decrease network device reference count after the device is used. Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
fan.du authored
After searching rt by the vti tunnel dst/src parameter, if this rt has neither attached to any transformation nor the transformation is not tunnel oriented, this rt should be released back to ip layer. otherwise causing dst memory leakage. Signed-off-by:
Fan Du <fan.du@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
The parameter is just 'group', not 'groups', fix the documentation typo. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull second set of ARC changes from Vineet Gupta: - Support for Perf from Mischa - Enabling GPIO/Pinctrl drivers for Abilis TB10x platform - New defconfig for buildroot * tag 'arc-v3.13-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-arcfpga] Add defconfig without initramfs location ARC: perf: ARC 700 PMU doesn't support sampling events ARC: Add documentation on DT binding for ARC700 PMU ARC: Add perf support for ARC700 cores ARC: [TB10x] Updates for GPIO and pinctrl
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull second set of s390 patches from Martin Schwidefsky: "The handling of the PCI hotplug notifications has been improved, the zfcp dumper can now detect the HSA size dynamically and the default install kernel has been changed to the compressed bzImage. And two bug-fixes for scm and 3720" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: implement hotplug notifications s390/scm_block: do not hide eadm subchannel dependency s390/sclp: Consolidate early sclp init calls to sclp_early_detect() s390/sclp: Move early code from sclp_cmd.c to sclp_early.c s390/sclp: Determine HSA size dynamically for zfcpdump s390/sclp: Move declarations for sclp_sdias into separate header file s390/pci: implement pcibios_remove_bus s390/pci: improve handling of bus resources s390/3270: fix missing device_destroy() call s390/boot: Install bzImage as default kernel image
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML changes from Richard Weinberger: "This pile contains a nice defconfig cleanup, a rewritten stack unwinder and various cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Remove unused declarations from <as-layout.h> um: remove used STDIO_CONSOLE Kconfig param um/vdso: add .gitignore for a couple of targets arch/um: make it work with defconfig and x86_64 um: Make kstack_depth_to_print conform to arch/x86 um: Get rid of thread_struct->saved_task um: Make stack trace reliable against kernel mode faults um: Rewrite show_stack()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Ingo Molnar: "A modular build fix for certain .config's" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Export 'boot_cpu_physical_apicid' to modules
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq cleanups from Ingo Molnar: "This is a multi-arch cleanup series from Thomas Gleixner, which we kept to near the end of the merge window, to not interfere with architecture updates. This series (motivated by the -rt kernel) unifies more aspects of IRQ handling and generalizes PREEMPT_ACTIVE" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: preempt: Make PREEMPT_ACTIVE generic sparc: Use preempt_schedule_irq ia64: Use preempt_schedule_irq m32r: Use preempt_schedule_irq hardirq: Make hardirq bits generic m68k: Simplify low level interrupt handling code genirq: Prevent spurious detection for unconditionally polled interrupts
-
- Nov 19, 2013
-
-
Al Viro authored
Once we'd freed m->buf, m->count should become zero - we have no valid contents reachable via m->buf. Reported-by:
Charley (Hao Chuan) Chu <charley.chu@broadcom.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog changes from Wim Van Sebroeck: - addition of MOXA ART watchdog driver (moxart_wdt) - addition of CSR SiRFprimaII and SiRFatlasVI watchdog driver (sirfsoc_wdt) - addition of ralink watchdog driver (rt2880_wdt) - various fixes and cleanups (__user annotation, ioctl return codes, removal of redundant of_match_ptr, removal of unnecessary amba_set_drvdata(), use allocated buffer for usb_control_msg, ...) - removal of MODULE_ALIAS_MISCDEV statements - watchdog related DT bindings - first set of improvements on the w83627hf_wdt driver * git://www.linux-watchdog.org/linux-watchdog: (26 commits) watchdog: w83627hf: Use helper functions to access superio registers watchdog: w83627hf: Enable watchdog device only if not already enabled watchdog: w83627hf: Enable watchdog only once watchdog: w83627hf: Convert to watchdog infrastructure watchdog: omap_wdt: raw read and write endian fix watchdog: sirf: don't depend on dummy value of CLOCK_TICK_RATE watchdog: pcwd_usb: overflow in usb_pcwd_send_command() watchdog: rt2880_wdt: fix return value check in rt288x_wdt_probe() watchdog: watchdog_core: Fix a trivial typo watchdog: dw: Enable OF support for DW watchdog timer watchdog: Get rid of MODULE_ALIAS_MISCDEV statements watchdog: ts72xx_wdt: Propagate return value from timeout_to_regval watchdog: pcwd_usb: Use allocated buffer for usb_control_msg watchdog: sp805_wdt: Remove unnecessary amba_set_drvdata() watchdog: sirf: add watchdog driver of CSR SiRFprimaII and SiRFatlasVI watchdog: Remove redundant of_match_ptr watchdog: ts72xx_wdt: cleanup return codes in ioctl documentation/devicetree: Move DT bindings from gpio to watchdog watchdog: add ralink watchdog driver watchdog: Add MOXA ART watchdog driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c changes from Wolfram Sang: - new drivers for exynos5, bcm kona, and st micro - bigger overhauls for drivers mxs and rcar - typical driver bugfixes, cleanups, improvements - got rid of the superfluous 'driver' member in i2c_client struct This touches a few drivers in other subsystems. All acked. * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe() i2c: i2c-eg20t: do not print error message in syslog if no ACK received i2c: bcm-kona: Introduce Broadcom I2C Driver i2c: cbus-gpio: Fix device tree binding i2c: wmt: add missing clk_disable_unprepare() on error i2c: designware: add new ACPI IDs i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH i2c: exynos5: Remove incorrect clk_disable_unprepare i2c: i2c-st: Add ST I2C controller i2c: exynos5: add High Speed I2C controller driver i2c: rcar: fixup rcar type naming i2c: scmi: remove some bogus NULL checks i2c: sh_mobile & rcar: Enable the driver on all ARM platforms i2c: sh_mobile: Convert to clk_prepare/unprepare i2c: mux: gpio: use reg value for i2c_add_mux_adapter i2c: mux: gpio: use gpio_set_value_cansleep() i2c: Include linux/of.h header i2c: mxs: Fix PIO mode on i.MX23 i2c: mxs: Rework the PIO mode operation i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
Pull infiniband/rdma updates from Roland Dreier: - Re-enable flow steering verbs with new improved userspace ABI - Fixes for slow connection due to GID lookup scalability - IPoIB fixes - Many fixes to HW drivers including mlx4, mlx5, ocrdma and qib - Further improvements to SRP error handling - Add new transport type for Cisco usNIC * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (66 commits) IB/core: Re-enable create_flow/destroy_flow uverbs IB/core: extended command: an improved infrastructure for uverbs commands IB/core: Remove ib_uverbs_flow_spec structure from userspace IB/core: Use a common header for uverbs flow_specs IB/core: Make uverbs flow structure use names like verbs ones IB/core: Rename 'flow' structs to match other uverbs structs IB/core: clarify overflow/underflow checks on ib_create/destroy_flow IB/ucma: Convert use of typedef ctl_table to struct ctl_table IB/cm: Convert to using idr_alloc_cyclic() IB/mlx5: Fix page shift in create CQ for userspace IB/mlx4: Fix device max capabilities check IB/mlx5: Fix list_del of empty list IB/mlx5: Remove dead code IB/core: Encorce MR access rights rules on kernel consumers IB/mlx4: Fix endless loop in resize CQ RDMA/cma: Remove unused argument and minor dead code RDMA/ucma: Discard events for IDs not yet claimed by user space IB/core: Add Cisco usNIC rdma node and transport types RDMA/nes: Remove self-assignment from nes_query_qp() IB/srp: Report receive errors correctly ...
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
Pull battery updates from Anton Vorontsov: "Highlights: - A new driver for TI BQ24735 Battery Chargers, courtesy of NVidia. - Device tree bindings for TWL4030 chips. - Random fixes and cleanups" * tag 'for-v3.13' of git://git.infradead.org/battery-2.6: pm2301-charger: Remove unneeded NULL checks twl4030_charger: Add devicetree support power_supply: Fix documentation for TEMP_*ALERT* properties max17042_battery: Support regmap to access device's registers max17042_battery: Use SIMPLE_DEV_PM_OPS charger-manager : Replace kzalloc to devm_kzalloc and remove uneccessary code bq2415x_charger: Fix max battery regulation voltage tps65090-charger: Use "IS_ENABLED(CONFIG_OF)" for DT code tps65090-charger: Drop devm_free_irq of devm_ allocated irq power_supply: Add support for bq24735 charger pm2301-charger: Staticize pm2xxx_charger_die_therm_mngt pm2301-charger: Check return value of regulator_enable ab8500-charger: Remove redundant break ab8500-charger: Check return value of regulator_enable isp1704_charger: Fix driver to work with changes introduced in v3.5
-
Linus Torvalds authored
Merge branch 'topic/kbuild-fixes-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media build fixes from Mauro Carvalho Chehab: "A series of patches that fix compilation on non-x86 archs. While most of them are just build fixes, there are some fixes for real bugs, as there are a number of drivers using dynamic stack allocation. A few of those might be considered a security risk, if the i2c-dev module is loaded, as someone could be sending very long I2C data that could potentially overflow the Kernel stack. Ok, as using /dev/i2c-* devnodes usually requires root on usual distros, and exploiting it would require a DVB board or USB stick, the risk is not high" * 'topic/kbuild-fixes-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (28 commits) [media] platform drivers: Fix build on frv arch [media] lirc_zilog: Don't use dynamic static allocation [media] mxl111sf: Don't use dynamic static allocation [media] af9035: Don't use dynamic static allocation [media] af9015: Don't use dynamic static allocation [media] dw2102: Don't use dynamic static allocation [media] dibusb-common: Don't use dynamic static allocation [media] cxusb: Don't use dynamic static allocation [media] v4l2-async: Don't use dynamic static allocation [media] cimax2: Don't use dynamic static allocation [media] tuner-xc2028: Don't use dynamic static allocation [media] tuners: Don't use dynamic static allocation [media] av7110_hw: Don't use dynamic static allocation [media] stv090x: Don't use dynamic static allocation [media] stv0367: Don't use dynamic static allocation [media] stb0899_drv: Don't use dynamic static allocation [media] dvb-frontends: Don't use dynamic static allocation [media] dvb-frontends: Don't use dynamic static allocation [media] s5h1420: Don't use dynamic static allocation [media] uvc/lirc_serial: Fix some warnings on parisc arch ...
-
Stephen Rothwell authored
After merging the final tree, today's linux-next build (sparc64 defconfig) failed like this: arch/sparc/mm/init_64.c: In function 'pte_alloc_one': arch/sparc/mm/init_64.c:2568:9: error: unused variable 'pte' [-Werror=unused-variable] Caused by the merge between commit 37b3a8ff ("sparc64: Move from 4MB to 8MB huge pages") and commit 1ae9ae5f ("sparc: handle pgtable_page_ctor() fail") (I had the following merge fix in linux-next, but it didn't seem to propagate upstream - may have forgotten to point it out :-(). Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-