- Mar 24, 2012
-
-
Andy Whitcroft authored
Adjacent strings indicate concatentation, therefore look at identifiers directly adjacent to literal strings as strings too. This allows us to better detect the form below and accept it as a simple constant: #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Signed-off-by:
Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Whitcroft authored
Signed-off-by:
Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Whitcroft authored
Handle the [ A ... B ] form deeper into a definition, for example: static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = { {0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 }, {0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 }, }; Reported-by:
Marek Vasut <marek.vasut@gmail.com> Signed-off-by:
Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Artem Bityutskiy authored
Fix checkpatch.pl when both -q and --ignore are given and prevents it from printing a NOTE: Ignored message types: blah messages. E.g., if I use -q --ignore PREFER_PACKED,PREFER_ALIGNED, i see: NOTE: Ignored message types: PREFER_ALIGNED PREFER_PACKED It makes no sense to print this when -q is given. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
Argument alignment across multiple lines should match the open parenthesis. Logical continuations should be at the end of the previous line, not the start of a new line. These are not required by CodingStyle so make the tests active only when using --strict. Improved by some examples from Bruce Allen. Signed-off-by:
Joe Perches <joe@perches.com> Cc: "Bruce W. Allen" <bruce.w.allan@intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
It's equivalent to __printf, so prefer __scanf. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Xiao Guangrong authored
Introduce prio_set_parent() to abstract the operation which is used to attach the node to its parent. Signed-off-by:
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Xiao Guangrong authored
In current code, the deleted-node is recorded from first to last, actually, we can directly attach these node on 'node' we will insert as the left child, it can let the code more readable. Signed-off-by:
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Xiao Guangrong authored
Introduce iter_walk_down()/iter_walk_up() to remove the common code between prio_tree_left() and prio_tree_right(). Signed-off-by:
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Xiao Guangrong authored
Remove the code since 'node' has already been initialized in the begin of the function Signed-off-by:
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
- Generate a 64-bit pattern more efficiently memchr_inv needs to generate a 64-bit pattern filled with a target character. The operation can be done by more efficient way. - Don't call the slow check_bytes() if the memory area is 64-bit aligned memchr_inv compares contiguous 64-bit words with the 64-bit pattern as much as possible. The outside of the region is checked by check_bytes() that scans for each byte. Unfortunately, the first 64-bit word is unexpectedly scanned by check_bytes() even if the memory area is aligned to a 64-bit boundary. Both changes were originally suggested by Eric Dumazet. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Bryan Wu authored
After moving some core functions to led-core.c, led-class.c can be built as module again. Signed-off-by:
Bryan Wu <bryan.wu@canonical.com> Acked-by:
Richard Purdie <richard.purdie@linuxfoundation.org> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Axel Lin authored
Improve the readability by moving the code setting gen_config to one place. [akpm@linux-foundation.org: fix some patch skew] Signed-off-by:
Axel Lin <axel.lin@gmail.com> Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Cc: "Milo(Woogyom) Kim" <milo.kim@ti.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Axel Lin authored
Signed-off-by:
Axel Lin <axel.lin@gmail.com> Cc: Peter Meerwald <p.meerwald@bct-electronic.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kim, Milo authored
Use 'pdata' rather than 'pltfm' in lm3530_init_registers(). Signed-off-by:
Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Axel Lin <axel.lin@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kim, Milo authored
LM3530_ALS_ZONE_REG is read-only register. Writing this register is not necessary. Signed-off-by:
Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kim, Milo authored
* add 'struct lm3530_pwm_data' in the platform data The pwm data is the platform specific functions which generate the pwm. The pwm data is only valid when brightness is pwm input mode. Functions should be implemented by the pwm driver. pwm_set_intensity() : set duty of pwm. pwm_get_intensity() : get current the brightness. * brightness control by pwm If the control mode is pwm, then brightness is changed by the duty of pwm=. So pwm platform function should be called in lm3530_brightness_set(). * do not update brightness register when pwm input mode In pwm input mode, brightness register is not used. If any value is updated in this register, then the led will be off. * when input mode is changed, set duty of pwm to 0 if unnecessary. Signed-off-by:
Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kim, Milo authored
To get members of lm3530_data, use 'struct led_classdev' rather than 'struct i2c_client'. [akpm@linux-foundation.org: fix 80-column fixes more nicely] Signed-off-by:
Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kim, Milo authored
Only 7 bits are used for updating the brightness. (register address : A0h) So the max_brightness property of lm3530 should be set to 127. On initializing registers, maximum initial brightness is limited to 'max_brightness'. Division-by-two is removed on updating the brightness. This arithmetic is not necessary because the range of brightness is 0 ~ 127= . Signed-off-by:
Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mark Brown authored
Direct usage of the asm include has long been deprecated by the introduction of gpiolib. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Peter Meerwald authored
Driver for the PCA9633 I2C chip supporting four LEDs and 255 brightness levels. [akpm@linux-foundation.org: fix kcalloc() call] [axel.lin@gmail.com: fix kcalloc parameters swapped] Signed-off-by:
Peter Meerwald <p.meerwald@bct-electronic.com> Signed-off-by:
Axel Lin <axel.lin@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
Saves ~50 bytes text and speeds things up. Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Srinidhi KASAGAR authored
Fix it by assigning the lp5521_read return value. Signed-off-by:
srinidhi kasagar <srinidhi.kasagar@stericsson.com> Cc: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Arun MURTHY <arun.murthy@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kim, Milo authored
For better readability, values of LP5521_REG_ENABLE register were redefined= . Additional definitions: LP5521_ENABLE_DEFAULT and LP5521_ENABLE_RUN_PROGRAM= . Use definition rather than hard code value. : 0x3F -> 'LP5521_CMD_DIRECT' Signed-off-by:
Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Arun MURTHY <arun.murthy@stericsson.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kim, Milo authored
The lp5521 has autonomous operation mode without external control. Using lp5521_platform_data, various led patterns can be configurable. For supporting this feature, new functions and device attribute are added. Structure of lp5521_led_pattern: 3 channels are supported - red, green and blue. Pattern(s) of each channel and numbers of pattern(s) are defined in the pla= tform data. Pattern data are hexa codes which include pattern commands such like set pwm, wait, ramp up/down, branch and so on. Pattern mode functions: * lp5521_clear_program_memory Before running new led pattern, program memory should be cleared. * lp5521_write_program_memory Pattern data updated in the program memory via the i2c. * lp5521_get_pattern Get pattern from predefined in the platform data. * lp5521_run_led_pattern Stop current pattern or run new pattern. Transition time is required between different operation mode. Device attribute - 'led_pattern': To load specific led pattern, new device attribute is added. When the lp5521 driver is unloaded, stop current led pattern mode. Documentation updated : description about how to define the led patterns and example. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by:
Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Arun MURTHY <arun.murthy@stericsson.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kim, Milo authored
The value of CONFIG register(Addr 08h) is configurable. For supporting this feature, update_config is added in the platform data. If 'update_config' is not defined, the default value is 'LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT'. To define CONFIG register in the platform data, the bit definitions were mo= ved to the header file. Documentation updated : description about 'update_config' and example. Signed-off-by:
Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Arun MURTHY <arun.murthy@stericsson.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kim, Milo authored
The name of each led channel can be configurable. For the compatibility, the name is set to default value(xx:channelN) when 'name' is not defined. Signed-off-by:
Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Arun MURTHY <arun.murthy@stericsson.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Wolfram Sang authored
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: NeilBrown <neilb@suse.de> Cc: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Carpenter authored
Just a small tidy-up. 1) There is a NULL dereference if the tca allocation fails. 2) The call to cancel_work_sync() isn't needed because we haven't scheduled any work. 3) The call to i2c_set_clientdata() isn't needed because the core handles that automatically if probe() fails. 4) I added some curly braces for style reasons. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Masanari Iida authored
"reseting" -> "resetting" Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
Use for_each_clear_bit() to iterate over all the cleared bit in a memory region. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
Use for_each_clear_bit() to iterate over all the cleared bit in a memory region. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Stefano Panella <stefano.panella@csr.com> Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
Use for_each_clear_bit() to iterate over all the cleared bit in a memory region. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
Use for_each_clear_bit() to iterate over all the cleared bit in a memory region. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
Introduce for_each_clear_bit() and for_each_clear_bit_from(). They are similar to for_each_set_bit() and list_for_each_set_bit_from(), but they iterate over all the cleared bits in a memory region. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Stefano Panella <stefano.panella@csr.com> Cc: David Vrabel <david.vrabel@csr.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
Remove for_each_set_bit_cont() after confirming that no one uses for_each_set_bit_cont() anymore. [sfr@canb.auug.org.au: regmap: cope with bitops API change] Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Robert Richter <robert.richter@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
This renames for_each_set_bit_cont() to for_each_set_bit_from() because it is analogous to list_for_each_entry_from() in list.h rather than list_for_each_entry_continue(). This doesn't remove for_each_set_bit_cont() for now. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Fix build error when GPIO_CS5535 is not enabled: drivers/built-in.o: In function `ot200_backlight_probe': ot200_bl.c:(.text+0x205bf): undefined reference to `cs5535_gpio_set' ot200_bl.c:(.text+0x205d1): undefined reference to `cs5535_gpio_set' Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jingoo Han authored
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Grazvydas Ignotas authored
Add support for pandora (openpandora.org) backlight. It might look like all this could be done using pwm_bl.c instead, but there is a need of special programming sequence when turning on the LED driver chip or else it will misbehave. Doing this using pwm_bl.c would require to use some register programming and pwm functions from platform code, and ARM maintainers are allergic to driver-like code in /arch/arm nowadays. The PMIC PWM driver is currently missing too, so pwm_bl.c can't be used anyway. Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-