- Nov 13, 2019
-
-
Sam Bobroff authored
Currently when an EEH error is detected, the system log receives the same (or almost the same) message twice: EEH: PHB#0 failure detected, location: N/A EEH: PHB#0 failure detected, location: N/A or EEH: eeh_dev_check_failure: Frozen PHB#0-PE#0 detected EEH: Frozen PHB#0-PE#0 detected This looks like a bug, but in fact the messages are from different functions and mean slightly different things. So keep both but change one of the messages slightly, so that it's clear they are different: EEH: PHB#0 failure detected, location: N/A EEH: Recovering PHB#0, location: N/A or EEH: eeh_dev_check_failure: Frozen PHB#0-PE#0 detected EEH: Recovering PHB#0-PE#0 Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/43817cb6e6631b0828b9a6e266f60d1f8ca8eb22.1571288375.git.sbobroff@linux.ibm.com
-
Leonardo Bras authored
Changes the return variable to bool (as the return value) and avoids doing a ternary operation before returning. Signed-off-by:
Leonardo Bras <leonardo@linux.ibm.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802133914.30413-1-leonardo@linux.ibm.com
-
Christoph Hellwig authored
The powerpc version of dma-mapping.h only contains a version of get_arch_dma_ops that always return NULL. Replace it with the asm-generic version that does the same. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190807150752.17894-1-hch@lst.de
-
Cédric Le Goater authored
When the machine crash handler is invoked, all interrupts are masked but interrupts which have not been started yet do not have an ESB page mapped in the Linux address space. This crashes the 'crash kexec' sequence on sPAPR guests. To fix, force the mapping of the ESB page when an interrupt is being mapped in the Linux IRQ number space. This is done by setting the initial state of the interrupt to OFF which is not necessarily the case on PowerNV. Fixes: 243e2511 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
Cédric Le Goater <clg@kaod.org> Reviewed-by:
Greg Kurz <groug@kaod.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191031063100.3864-1-clg@kaod.org
-
Andrew Donnellan authored
It's KUAP, not KAUP. Fix typo in INT_COMMON macro. Signed-off-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191022060603.24101-1-ajd@linux.ibm.com
-
Thomas Huth authored
The FSF does not reside in "675 Mass Ave, Cambridge" anymore... let's simply use proper SPDX identifiers instead. Signed-off-by:
Thomas Huth <thuth@redhat.com> Acked-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190828060737.32531-1-thuth@redhat.com
-
Aneesh Kumar K.V authored
Avoids confusion when printing Oops message like below Faulting instruction address: 0xc00000000008bdb4 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV This was because we never clear the MMU_FTR_HPTE_TABLE feature flag even if we run with radix translation. It was discussed that we should look at this feature flag as an indication of the capability to run hash translation and we should not clear the flag even if we run in radix translation. All the code paths check for radix_enabled() check and if found true consider we are running with radix translation. Follow the same sequence for finding the MMU translation string to be used in Oops message. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Acked-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190711145814.17970-1-aneesh.kumar@linux.ibm.com
-
YueHaibing authored
arch/powerpc/platforms/cell/spufs/inode.c:201:22: warning: variable ctx set but not used [-Wunused-but-set-variable] It is not used since commit 67cba9fd ("move spu_forget() into spufs_rmdir()") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191023134423.15052-1-yuehaibing@huawei.com
-
YueHaibing authored
The callback function of call_rcu() just calls a kfree(), so we can use kfree_rcu() instead of call_rcu() + callback function. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190711141818.18044-1-yuehaibing@huawei.com
-
YueHaibing authored
Fix sparse warnings: arch/powerpc/platforms/powernv/opal-psr.c:20:1: warning: symbol 'psr_mutex' was not declared. Should it be static? arch/powerpc/platforms/powernv/opal-psr.c:27:3: warning: symbol 'psr_attrs' was not declared. Should it be static? arch/powerpc/platforms/powernv/opal-powercap.c:20:1: warning: symbol 'powercap_mutex' was not declared. Should it be static? arch/powerpc/platforms/powernv/opal-sensor-groups.c:20:1: warning: symbol 'sg_mutex' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190702131733.44100-1-yuehaibing@huawei.com
-
YueHaibing authored
These Kconfig options has been removed in commit 4c145dce ("xfrm: make xfrm modes builtin") So there is no point to keep it in defconfigs any longer. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> [mpe: Extract from cross arch patch] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190612071901.21736-1-yuehaibing@huawei.com
-
YueHaibing authored
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190218133950.95225-1-yuehaibing@huawei.com
-
YueHaibing authored
There is no need to have the 'struct dentry *vpa_dir' variable static since new value always be assigned before use it. Fixes: c6c26fb5 ("powerpc/pseries: Export raw per-CPU VPA data via debugfs") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190218125644.87448-1-yuehaibing@huawei.com
-
YueHaibing authored
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1545705876-63132-1-git-send-email-yuehaibing@huawei.com
-
YueHaibing authored
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1543498518-107601-1-git-send-email-yuehaibing@huawei.com
-
YueHaibing authored
rtas_parse_epow_errlog() should pass 'modifier' to handle_system_shutdown, because event modifier only use bottom 4 bits. Reviewed-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191023134838.21280-1-yuehaibing@huawei.com
-
Ravi Bangoria authored
On the 8xx, signals are generated after executing the instruction. So no need to manually single-step on 8xx. Also, 8xx __set_dabr() currently ignores length and hardcodes the length to 8 bytes. So all unaligned and 512 byte testcase will fail on 8xx. Ignore those testcases on 8xx. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191017093204.7511-8-ravi.bangoria@linux.ibm.com
-
Ravi Bangoria authored
So far we used to ignore exception if DAR points outside of user specified range. But now we are ignoring it only if actual load/store range does not overlap with user specified range. Include selftests for the same: # ./tools/testing/selftests/powerpc/ptrace/perf-hwbreak ... TESTED: No overlap TESTED: Partial overlap TESTED: Partial overlap TESTED: No overlap TESTED: Full overlap success: perf_hwbreak Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191017093204.7511-7-ravi.bangoria@linux.ibm.com
-
Ravi Bangoria authored
ptrace-hwbreak.c selftest is logically broken. On powerpc, when watchpoint is created with ptrace, signals are generated before executing the instruction and user has to manually singlestep the instruction with watchpoint disabled, which selftest never does and thus it keeps on getting the signal at the same instruction. If we fix it, selftest fails because the logical connection between tracer(parent) and tracee(child) is also broken. Rewrite the selftest and add new tests for unaligned access. With patch: $ ./tools/testing/selftests/powerpc/ptrace/ptrace-hwbreak test: ptrace-hwbreak tags: git_version:powerpc-5.3-4-224-g218b868240c7-dirty PTRACE_SET_DEBUGREG, WO, len: 1: Ok PTRACE_SET_DEBUGREG, WO, len: 2: Ok PTRACE_SET_DEBUGREG, WO, len: 4: Ok PTRACE_SET_DEBUGREG, WO, len: 8: Ok PTRACE_SET_DEBUGREG, RO, len: 1: Ok PTRACE_SET_DEBUGREG, RO, len: 2: Ok PTRACE_SET_DEBUGREG, RO, len: 4: Ok PTRACE_SET_DEBUGREG, RO, len: 8: Ok PTRACE_SET_DEBUGREG, RW, len: 1: Ok PTRACE_SET_DEBUGREG, RW, len: 2: Ok PTRACE_SET_DEBUGREG, RW, len: 4: Ok PTRACE_SET_DEBUGREG, RW, len: 8: Ok PPC_PTRACE_SETHWDEBUG, MODE_EXACT, WO, len: 1: Ok PPC_PTRACE_SETHWDEBUG, MODE_EXACT, RO, len: 1: Ok PPC_PTRACE_SETHWDEBUG, MODE_EXACT, RW, len: 1: Ok PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, WO, len: 6: Ok PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, RO, len: 6: Ok PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, RW, len: 6: Ok PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, WO, len: 6: Ok PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, RO, len: 6: Ok PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, RW, len: 6: Ok PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, DAR OUTSIDE, RW, len: 6: Ok PPC_PTRACE_SETHWDEBUG, DAWR_MAX_LEN, RW, len: 512: Ok success: ptrace-hwbreak Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191017093204.7511-6-ravi.bangoria@linux.ibm.com
-
Ravi Bangoria authored
On powerpc, watchpoint match range is double-word granular. On a watchpoint hit, DAR is set to the first byte of overlap between actual access and watched range. And thus it's quite possible that DAR does not point inside user specified range. Ex, say user creates a watchpoint with address range 0x1004 to 0x1007. So hw would be configured to watch from 0x1000 to 0x1007. If there is a 4 byte access from 0x1002 to 0x1005, DAR will point to 0x1002 and thus interrupt handler considers it as extraneous, but it's actually not, because part of the access belongs to what user has asked. Instead of blindly ignoring the exception, get actual address range by analysing an instruction, and ignore only if actual range does not overlap with user specified range. Note: The behavior is unchanged for 8xx. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191017093204.7511-5-ravi.bangoria@linux.ibm.com
-
Ravi Bangoria authored
ptrace_set_debugreg() does not consider new length while overwriting the watchpoint. Fix that. ppc_set_hwdebug() aligns watchpoint address to doubleword boundary but does not change the length. If address range is crossing doubleword boundary and length is less then 8, we will lose samples from second doubleword. So fix that as well. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191017093204.7511-4-ravi.bangoria@linux.ibm.com
-
Ravi Bangoria authored
Watchpoint match range is always doubleword(8 bytes) aligned on powerpc. If the given range is crossing doubleword boundary, we need to increase the length such that next doubleword also get covered. Ex, address len = 6 bytes |=========. |------------v--|------v--------| | | | | | | | | | | | | | | | | | |---------------|---------------| <---8 bytes---> In such case, current code configures hw as: start_addr = address & ~HW_BREAKPOINT_ALIGN len = 8 bytes And thus read/write in last 4 bytes of the given range is ignored. Fix this by including next doubleword in the length. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191017093204.7511-3-ravi.bangoria@linux.ibm.com
-
Ravi Bangoria authored
We are hadrcoding length everywhere in the watchpoint code. Introduce macros for the length and use them. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191017093204.7511-2-ravi.bangoria@linux.ibm.com
-
Gustavo L. F. Walbon authored
The issue was showing "Mitigation" message via sysfs whatever the state of "RFI Flush", but it should show "Vulnerable" when it is disabled. If you have "L1D private" feature enabled and not "RFI Flush" you are vulnerable to meltdown attacks. "RFI Flush" is the key feature to mitigate the meltdown whatever the "L1D private" state. SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only. So the message should be as the truth table shows: CPU | L1D private | RFI Flush | sysfs ----|-------------|-----------|------------------------------------- P9 | False | False | Vulnerable P9 | False | True | Mitigation: RFI Flush P9 | True | False | Vulnerable: L1D private per thread P9 | True | True | Mitigation: RFI Flush, L1D private per thread P8 | False | False | Vulnerable P8 | False | True | Mitigation: RFI Flush Output before this fix: # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: RFI Flush, L1D private per thread # echo 0 > /sys/kernel/debug/powerpc/rfi_flush # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: L1D private per thread Output after fix: # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: RFI Flush, L1D private per thread # echo 0 > /sys/kernel/debug/powerpc/rfi_flush # cat /sys/devices/system/cpu/vulnerabilities/meltdown Vulnerable: L1D private per thread Signed-off-by:
Gustavo L. F. Walbon <gwalbon@linux.ibm.com> Signed-off-by:
Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190502210907.42375-1-gwalbon@linux.ibm.com
-
Chris Smart authored
The stress test for vpmsum implementations executes a long for loop in the kernel. This blocks the scheduler, which prevents other tasks from running, resulting in a warning. This fix adds a call to cond_reshed() at the end of each loop, which allows the scheduler to run other tasks as required. Signed-off-by:
Chris Smart <chris.smart@humanservices.gov.au> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191103233356.5472-1-chris.smart@humanservices.gov.au
-
David Hildenbrand authored
Let's allow to test the implementation without needing HW support. When "simulate=1" is specified when loading the module, we bypass all HW checks and HW calls. The sysfs file "simulate_loan_target_kb" can be used to simulate HW requests. The simualtion mode can be activated using: modprobe cmm debug=1 simulate=1 And the requested loan target can be changed using: echo X > /sys/devices/system/cmm/cmm0/simulate_loan_target_kb Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191031142933.10779-11-david@redhat.com
-
David Hildenbrand authored
balloon_page_alloc() will use GFP_HIGHUSER_MOVABLE in case we have CONFIG_BALLOON_COMPACTION. This is now possible, as balloon pages are movable with CONFIG_BALLOON_COMPACTION. Without CONFIG_BALLOON_COMPACTION, GFP_HIGHUSER is used. Note that apart from that, balloon_page_alloc() uses the following flags: __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN And current code used: GFP_NOIO | __GFP_NOWARN | __GFP_NORETRY | __GFP_NOMEMALLOC GFP_HIGHUSER/GFP_HIGHUSER_MOVABLE include __GFP_RECLAIM | __GFP_IO | __GFP_FS | __GFP_HARDWALL | __GFP_HIGHMEM GFP_NOIO is __GFP_RECLAIM. With CONFIG_BALLOON_COMPACTION, we essentially add: __GFP_IO | __GFP_FS | __GFP_HARDWALL | __GFP_HIGHMEM | __GFP_MOVABLE Without CONFIG_BALLOON_COMPACTION, we essentially add: __GFP_IO | __GFP_FS | __GFP_HARDWALL | __GFP_HIGHMEM I assume this is fine, as this is what all other balloon compaction users use. If it turns out to be a problem, we could add __GFP_MOVABLE manually if we have CONFIG_BALLOON_COMPACTION. Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191031142933.10779-10-david@redhat.com
-
David Hildenbrand authored
We can now get rid of the cmm_lock and completely rely on the balloon compaction internals, which now also manage the page list and the lock. Inflated/"loaned" pages are now movable. Memory blocks that contain such pages can get offlined. Also, all such pages will be marked PageOffline() and can therefore be excluded in memory dumps using recent versions of makedumpfile. Don't switch to balloon_page_alloc() yet (due to the GFP_NOIO). Will do that separately to discuss this change in detail. Signed-off-by:
David Hildenbrand <david@redhat.com> [mpe: Add isolated_pages-- in cmm_migratepage() as suggested by David] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191031142933.10779-9-david@redhat.com
-
David Hildenbrand authored
When switching to balloon compaction, we want to drop the cmm_lock and completely rely on the balloon compaction list lock internally. loaned_pages is currently protected under the cmm_lock. Note: Right now cmm_alloc_pages() and cmm_free_pages() can be called at the same time, e.g., via the thread and a concurrent OOM notifier. Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191031142933.10779-8-david@redhat.com
-
David Hildenbrand authored
The memory isolate notifier was added to allow to offline memory blocks that contain inflated/"loaned" pages. We can achieve the same using the balloon compaction framework. Get rid of the memory isolate notifier. Also, we can get rid of cmm_mem_going_offline(), as we will never reach that code path now when we have allocated memory in the balloon (allocated pages are unmovable and will no longer be special-cased using the memory isolation notifier). Leave the memory notifier in place, so we can still back off in case memory gets offlined. Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191031142933.10779-7-david@redhat.com
-
David Hildenbrand authored
adjust_managed_page_count() performs a totalram_pages_add(), but also adjusts the managed pages of the zone. Let's use that instead, similar to virtio-balloon. Use it before freeing a page. Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191031142933.10779-6-david@redhat.com
-
David Hildenbrand authored
We can simply store the pages in a list (page->lru), no need for a separate data structure (+ complicated handling). This is how most other balloon drivers store allocated pages without additional tracking data. For the notifiers, use page_to_pfn() to check if a page is in the applicable range. Use page_to_phys() in plpar_page_set_loaned() and plpar_page_set_active() (I assume due to the __pa() that's the right thing to do). Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191031142933.10779-5-david@redhat.com
-
David Hildenbrand authored
No need to initialize rc. Also, let's return 0 directly when succeeding. Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191031142933.10779-4-david@redhat.com
-
David Hildenbrand authored
If we don't set the rc, we will return "0", making it look like we succeeded. Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191031142933.10779-3-david@redhat.com
-
David Hildenbrand authored
When unloading the module, one gets ------------[ cut here ]------------ Device 'cmm0' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt. WARNING: CPU: 0 PID: 19308 at drivers/base/core.c:1244 .device_release+0xcc/0xf0 ... We only have one static fake device. There is nothing to do when releasing the device (via cmm_exit()). Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191031142933.10779-2-david@redhat.com
-
Tyrel Datwyler authored
Advertise client support for the PAPR architected ibm,drc-info device tree property during CAS handshake. Fixes: c7a3275e ("powerpc/pseries: Revert support for ibm,drc-info devtree property") Signed-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1573449697-5448-11-git-send-email-tyreld@linux.ibm.com
-
Tyrel Datwyler authored
The newer ibm,drc-info property is a condensed description of the old ibm,drc-* properties (ie. names, types, indexes, and power-domains). When matching a drc-index to a drc-name we need to verify that the index is within the start and last drc-index range and map it to a drc-name using the drc-name-prefix and logical index. Fix the mapping by checking that the index is within the range of the current drc-info entry, and build the name from the drc-name-prefix concatenated with the starting drc-name-suffix value and the sequential index obtained by subtracting ibm,my-drc-index from this entries drc-start-index. Signed-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1573449697-5448-10-git-send-email-tyreld@linux.ibm.com
-
Tyrel Datwyler authored
The device tree is in big endian format and any properties directly retrieved using OF helpers that don't explicitly byte swap should be annotated. In particular there are several places where we grab the opaque property value for the old ibm,drc-* properties and the ibm,my-drc-index property. Fix this for better static checking by annotating values we know to explicitly big endian, and byte swap where appropriate. Signed-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1573449697-5448-9-git-send-email-tyreld@linux.ibm.com
-
Tyrel Datwyler authored
Split physical PCI slot registration scanning into separate routines that support the old ibm,drc-* properties and one that supports the new compressed ibm,drc-info property. Signed-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1573449697-5448-7-git-send-email-tyreld@linux.ibm.com
-
Tyrel Datwyler authored
In the event that the partition is migrated to a platform with older firmware that doesn't support the ibm,drc-info property the device tree is modified to remove the ibm,drc-info property and replace it with the older style ibm,drc-* properties for types, names, indexes, and power-domains. One of the requirements of the drc-info firmware feature is that the client is able to handle both the new property, and old style properties at runtime. Therefore we can't rely on the firmware feature alone to dictate which property is currently present in the device tree. Fix this short coming by checking explicitly for the ibm,drc-info property, and falling back to the older ibm,drc-* properties if it doesn't exist. Signed-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1573449697-5448-6-git-send-email-tyreld@linux.ibm.com
-